N95 going from one screen to another

My N95 has started flicking from one screen to another. Is this a programming fault? If I take it to a Nokia shop will it cost me a fortune?

It sounds like a button is stuck and is making your phone scroll through the menus, and i would think if it is starting with the menu then thats the problem key.
If the button works, as in when you click it you feel it depress beneath your finger, then there is a possibility that the handset may have got wet and the keypad(underneath the one you see) is corroded and is shorting making the phone think its always being pressed.
Take it to a Nokia Care Point and get it looked at.
You can find the nearest NCP to you at the Store Locator
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left.

Similar Messages

  • Slow while going from one screen to another screen

    Hi,
          I have installed SAP 4.7 version. The hardware of system is 3GHz processor and 1 GB RAM.  It is taking more time while going one screen to another. So after entering XD01 or any tcode , I have to wait for seconds some times 10 second to a get a screen and  getting a screen form another screen.
    Can any one tell me reason for this and how can be this issue resolved.
    Thanks,
    Manas

    When using system for the first time, a lot of compiling still has to be done which takes time, but also the fact that your system 'only'  has 1 GB RAM, could cause these problems as well. According to requirements, 1GB should be enough, but I would recommend at least 2GB.

  • Blank Screen while navigating from one screen to another in a web applicati

    Blank Screen while navigating from one screen to another in a web application.
    While navigating through the screens of the web-based application, I get blank screen at times. The application menu bar is still visible and the header and footer jsps are also still available. The main processing frame alone goes blank. Once I get the blank screen, I am able to choose from the menu option and contine navigating through the screens.
    The application has been deployed on WebSphere Application Server v6.0 and uses JDK 1.4.2. I have checked the application, server and systemerr logs. And there are no exceptions in any of the log files. There is no difference in the logs for a normal flow and the flow when the blank screen occurs.
    The blank screen does not occur always. It occurs around 3 out of 10 times. If you consider a particular page, mostly it loads normally and very few times, the blank screen occurs.
    Compression filter is being used and it gets invoked for every request. Size before and after compression also gets printed in the logs.
    Could this be causing any issue in terms of memory handled or could any jsp timeout be happening, though there are no exceptions in the logs.

    Well, since no one has any ideas, here is my two cents worth:
    Can you turn off compression and see if the problem goes away? If not, I suggest creating a small separate project with the same functionality as that part of the program that causes problems and see if you can duplicate it. Use System.out.println() in the java code and out.write() in the JSP pages throughout the java and JSP code to write to the log file or console as each section is run to see what section is causing problems. You can also consider commenting out sections of code in your JSP page to see if you can isolate the problem.
    I had a similar problem with the screen being blank and this is what I found:
    My JSP page had an include tag in it that included another JSP page. The outer JSP page was drawn and waited for the included JSP page to be drawn. The logic took several minutes to run and something timed out. The inner JSP page was never drawn. No log entry occurred. It appears that it was not Apache or Tomcat that caused the problem, but some firewall or similiar such device. If you have a firewall or similar device, see if the person who maintains it can temporarily set its timeout to a very long time (15 minutes) to see if the problem goes away. Apache and Tomcat probably also have a timeout feature too. You will have to read up on their configuration settings on how to set them.
    By the way, each of those devices probably has its own log file you can read to see if its reporting an error.

  • How we can get the values  from one screen to another screen?

    hi guru's.
         how we can get the values  from one screen to another screen?
              we get values where cusor is placed but in my requirement i want to get to field values from one screen to another screen.
    regards.
      satheesh.

    Just think of dynpros as windows into the global memory of your program... so if you want the value of a field on dynpro 1234 to appear on dynpro 2345, then just pop the value into a global variable (i.e. one defined in your top include), and you will be able to see it in your second dynpro (assuming you make the field formats etc the same on both screens!).

  • Whenever i start my ipad2 the applications automatically starts to open and close automatically jumps from one screen to another

    Whenever i start my ipad2 the applications automatically starts to open and close automatically jumps from one screen to another cannot operate the ipad at all, tried switching off and back on again, also restored the ipad but of no use

    try restart
    http://support.apple.com/kb/HT1430

  • HT4528 how do i move an icon from one screen to another on my Iphone 5?

    How do I mov an icon from one screen to another on my Iphone 5?

    Tap and hold an Icon until they begin to shake. Move the Icon towards the edge of the screen and hold for a couple seconds. The Icon will then "jump" to the next screen.

  • TS3274 How do I move icons from one screen to another?

    How do I move icons from one screen to another. 

    Hold down on one icon until they start shaking, then drag the icon to the edge of the screen, and the screen should slide to the next one, you can then drop it on that screen or drag it again to the edge to move to the next screen.
    Page 21 of the user guide explains this under Arranging Apps:
    http://manuals.info.apple.com/en/ipad_user_guide.pdf

  • I can't move an app from one screen to another screen

    I can't move an app from one screen to another screen

    You've got the apps shaking by pressing and holding one of them for a second or two ? If you have then you should be able to drag an app (not too quickly) and then hold it so that it overhangs the edge of the screen, and after a second or so the display should switch to that next/previous screen. Is that not working ?

  • Transfer field value from one screen to another screen

    hi gurus,
    I am using field exit in mm02, i want to transfer field value from one screen to another screen. I am using Export, Import, Some FM like DYNP.......
    but not getting the value.
    can any one give idea about this.
    Thanks in Advance,
    Sudheer.

    I THINK IN FIELD EXITS SOME RESTRICTION IS THERE YOU CAN NOT USE CALL TRANSACTION OR CALL SCREEN. I DONT KNOW WHAT IS YOUR ACTUAL REQUIREMENT. BUT YOU ARE TRYING TO CALL TRANSACTION USING MEMORY ID OR SOMETHING THEN I THINK IN FIELD EXIT YOU CAN NOT DO THAT. PLS CORRECT ME IF I AM WRONG
    REGARDS
    SHIBA DUTTA

  • I have a mac mini and just purchased a moshi hdmi connector for my LED TV. The problem is, I wanted to be able to take my mouse from one screen to another, not just as a mirror image! Is it possible to do this some how?

    I have a mac mini and just purchased a moshi hdmi connector for my LED TV. The problem is, I wanted to be able to take my mouse from one screen to another, not just as a mirror image! Is it possible to do this some how?

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    If you have two displays attached, then the function to change from mirrored to extended Desktop will appear in System Prefs/Displays.

  • Edit Text from one screen to another screen

    Hi Experts,
           Here I am having two doubts in doing functionality on SMP 2.3,The below mentioned are the doubts,
                       1. In SMP 2.3 Version,When i am doing Hybrid App Designer in that  Edit Text functionality to pass the values from one screen to another screen,we want to type any text or digits in edit text keypad options is not opening in that field.If any one knows to handle that issue please let me know experts.
                       2.  In SMP 2.3 Version,When i am doing Hybrid App Designer we are taking some labels or buttons or edit box etc....,first time i am generating the hybrid app it is displaying in the mobile device what ever i give in that screen.Afterwards when i am updating second time in that screen with extra functionality labels or buttons or edit box etc...,and generating hybrid app,these time it is not displaying in mobile device which i gave not updating.If any one knows to handle that issue please let me know experts.
         For these both isssues if anybody gets solutions to handle these data please let me know and if links are there please provide it .
    Thanks & Regards,
      Lokesh Reddy G,
      9700414490.

    Hi Lokesh,
    Regarding your queries:
    1. What kind of device/simulator and OS you are testing your app? What is its version?
    Can you share the snapshots as well?
    2. What extra functionality you have added 2nd time? When you generating hybrid app 2nd time is it uploading in HWC container successfully?
    Meanwhile you can check this blog
    A workflow Application to Release A Purchase Order...
    Rgrds,
    Jitendra

  • Moving app from one screen to another fails very often

    I'm using the feature to manually move apps from one screen to another on iPhones. It works very smooth without any problem on these devices.
    On my iPad 3 I've some trouble with that feature. 1 out of 20 tries works. It makes no difference if moved slow, fast or concentrated - it fails too often.
    Spoken with other people using iPad leads to the results the problem also exists on iPad 2. So what happens? You switch to edit mode by holding the "Home" button and wait until the apps are vibrating. Now you put a finger over an app, hold them and move them to the right or left display border. Instead of switching to the next screen the icon jumps back to it's original position. Different people tried it on my iPad and all of them failed in the given rate.
    Workaround is to use the shortcut bar on the bottom or to use iTunes from Mac or PC. I've also noticed that most of the time a "close" request of an application (by hitting the "-" sign on an app icon) failed if the app is on the border of the display. This happens randomly and you feel you missed the "-" sign so repeating the operation. But if you concentrate on it you will notice it doesn't respond properly.
    As a result my impression is the touchscreen functionality is not as good as on iPhone. Where I have no problem at all with both operations. As other people also suffer from this issues it must be related to the iPad screen.

    Yes by restoring the iPhone from the backup of the Pod.  The app has to be in the iTunes library of the computer on which you do the restore.

  • Is there an easy way to move multiple icons from one screen to another?

    I have multiple screens on my iphone 5c display.  I want to move multiple icons at the same time from one screen to another.  Is there a way to do this?

    You could put them all in a single folder and move the folder to another screen.

  • How to move tabs from one screen to another?

    Just started to group tabs. How can I move tabs from one screen to another to consolidate them into the groups?

    See <b>Tab Groups</b> (new in Fx4) (Panorama) [http://support.mozilla.com/en-US/kb/what-are-tab-groups What are Tab Groups] (video included)
    From one Window to another Window, by drag & drop
    <br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

  • Transfer from one screen to another screen in mm02

    hi guru,
    how to trasfer value of field from to screen to another screen.
    my problem is when we change in mm02 transaction Basic data1 view the field (prod.hierarchy) value it should be transfer to sale organization 2 view and displayed in prod.hierarchy.
    the value should be transfering from one screen to another screen.
    kindly do the need full code ASAP.
    Thanks & Regards,
    Sudheer.

    check this link....
    defining screen fields using FIELD-SYMBOL
    regds,
    kiran

Maybe you are looking for