N95 GPS is not correctly working!

I downloading two more GPS software my N95.Wyfinder and Google maps! ..and firstly a standard N95 software. Me problem is a GPS sensitivity: GPS just near the on-line 3G internet working more applications not working!
I driving yesterday Szekesfehervar (hungary) -Berlin (Germany! Just two point working: Berlin available and near Praha sections. All rout not working a GPS just finding a route and wait, and wait just not connecting! The map is wait a GPS positions and after N95 writting: not available GPS!!
Before time I reading, N95 GPS is best!
I thinking: N95 Gps is... sorry
..What is your experience?

Hi Bearone21, I have selected GPS & Verizon Location services and Google WiFi & mobile network location.

Similar Messages

Nokia N95 - GPS dos not work & Barcode Scan not wo...

Hi.. I have Nokia N95 (N95-1 by user manual) - device firmware soft version
11.0.026
17-04-07
RM-159
Nokia N95(05.01)
When i try use "GPS position" application or "Maps" it's dos not work. All ways i see - "no connected" in status (in my home, in street and other open places). In all times that i'am user my N95 only one time by command "Satellites State" y have screen with 2 satellite (~5second) and other time allways "No Data or No Connected Satellites".
Q: Whats the problem - it's that Qaulite(or Strong) of GPS(for that needed like it GPS)? or it's defect and GPS must work avrever (and home, and on street)
When i try use application "Barcode Reader" - it's no one times dos not readed barcode? Only try? and try, and try... all times?
Q: Why dos not work? who see worked "Barcode reader"?
Thank to ALL..
(with love from Russia)
Nokia! Take a care for me and we real say THANK YOU NOKIA and you can collect a more money

First of all , you should update to the newest firmware (v20). If you can of course, for some network branded phones update is not available yet.
As for GPS, first fix is taking a long time (5 to 10 minutes).
In v12 and above A-GPS (assisted GPS) was added to speedup the process. It's using data connection for initial lock.
And make sure you're not covering tha hash key, that's where GPS reciever is. It will get a fix, just be patient because it will take some time.
Barcode reader is not for reading normal barcodes (like on products). It's used for Nokia's mobilecodes. You can check it here
Message Edited by krisq on 28-Dec-2007 11:54 AM

802.1x with ACS does not correctly work

Hello
I have here a WLan setup with a WDS, some 40 Accesspoints, an ACS 4.1 server and a Windows Domain Controller which has the users configured.
I have a group mapping in ACS configured which points to a small group in the ADS.
The groupmapping in ACS points to a specific group in ACS.
There I've configured the following:
[009\001] cisco-av-pair
- ssid=xx-200 (the name of the SSID the clients connect)
[006] Service-Type
- Login
[007] Framed-Protocol
- PPP
[025] Class
- OU=pers; (this is not the special group where those users are in, but they are also in this one)
[064] Tunnel-Type
- Tag 1 Value Vlan
[065] Tunnel-Medium-Type
- Tag 1 Value 802
[081] Tunnel-Private-Group-ID
- Tag 1 Value 200 (the Vlan in which they should go)
The good thing is, authentication with username password works.
The bad thing is, every user can authenticate and get into this SSID instead of only the users in the special group which points to this groupmapping.
The other ADS groups also point to other ACS groups, but they don't have the above values ([009\001] cisco-av-pair, [064] Tunnel-Type, [065] Tunnel-Medium-Type, [081] Tunnel-Private-Group-ID) configured.
The logfile from the ACS also shows that the wrong users are mapped into the correct group like they should, but they still get access.
Here the WDS configuration:
aaa group server radius RADIUS_GROUP_WDS_RADIOMANAGEMENT
server 10.1.1.30 auth-port 1645 acct-port 1646
server 10.1.2.30 auth-port 1645 acct-port 1646
aaa authentication login METHOD_WDS_RADIOMANAGEMENT group RADIUS_GROUP_WDS_RADIOMANAGEMENT
aaa authentication enable default enable
aaa session-id common
radius-server host 10.1.1.30 auth-port 1645 acct-port 1646 key 7 xxxx
radius-server host 10.1.2.30 auth-port 1645 acct-port 1646 key 7 xxxx
radius-server retransmit 2
radius-server timeout 18
radius-server deadtime 1
radius-server vsa send accounting
wlccp authentication-server infrastructure METHOD_WDS_RADIOMANAGEMENT
wlccp authentication-server client any METHOD_WDS_RADIOMANAGEMENT
ssid xx-200
The accesspoint config:
aaa authentication login METHOD_RAD_WDS_CLIENT group radius
aaa authentication enable default enable
aaa session-id common
dot11 ssid xx-200
vlan 200
authentication open eap METHOD_RAD_WDS_CLIENT
authentication network-eap METHOD_RAD_WDS_CLIENT
authentication key-management wpa
interface Dot11Radio0
encryption vlan 200 mode ciphers aes-ccm
broadcast-key vlan 200 change 60
ssid xx-200
interface Dot11Radio0.200
description
encapsulation dot1Q 200
no ip route-cache
no cdp enable
bridge-group 200
bridge-group 200 subscriber-loop-control
bridge-group 200 block-unknown-source
no bridge-group 200 source-learning
no bridge-group 200 unicast-flooding
bridge-group 200 spanning-disabled
interface FastEthernet0.200
description
encapsulation dot1Q 200
no ip route-cache
bridge-group 200
no bridge-group 200 source-learning
bridge-group 200 spanning-disabled
I hope you can find why any user can authenticate and not just the ones in the groupmapping which has the radius attributes configured.
Thanks,
pato

I have finally found something to look into :/
000619: Jan 18 16:50:11 A: RADIUS: AAA Unsupported Attr: ssid [263] 6
000620: Jan 18 16:50:11 A: RADIUS: 48 53 52 2D [xxx-]
000621: Jan 18 16:50:11 A: RADIUS: AAA Unsupported Attr: interface [156] 4
000622: Jan 18 16:50:11 A: RADIUS: 32 35 [25]
This is with various debugging active on the WDS. And this might be the reason why it doesn't work.

CMIS Mount not correctly working with Mavericks

Hi.
I have recently updated my system to MAC OS X Mavericks (10.9) and Adobe Drive to Version 5.0.1. I am using CS6.
I updated from CS5, Drive 3 and Mac OS X 10.6.
The problem is as follows: The volume mount name is wrong and the permissions are wrong!
When i connect the CMIS volume (an alfresco 3.4 community dam) with Drive 5 the volume is mounted in Mac Finder as "cmis". Instead of my custom volume mount name "MyCustomVolume". I defined the custom name in Drive as well as in Alfresco CMIS-Config. And it worked flawlessly before updating. But i need the volume to be mounted as "MyCustomVolume" and not as "cmis".
The strange thing is: If i run the terminal and have a look at "~/Volumes" i can see, that there is a volume "dr-x------@ 1 myusername nogroup 0 20 Nov 15:22 MyCustomVolume" mounted. And no volume "cmis". So where does this "cmis" come from?
Needless to say, that my file linkings e.g. in InDesign documents are related to the old mount name and not to "cmis". Currently every file i open will have broken links.
And there is another issue: The "cmis" volume is "readonly" and not writeable. Using the Finder i am not able to change any of the cmis mount properties.
Actually i am wondering whether it is a Drive or a Mavericks issue. I posted this issue in the Adobe Forums as well.
I already tried this:
- Several Adobe Drive reinstallations, Adobe Drive Cache/Setting clearings as well as Mac OS Disk Utility permission repairs.
- Deactivated Sophos Antivir
- Uninstalled MacFuse and Tuxera NTFS
The problem is critical for me because my daily work depends on a seemless cmis integration.
So i hope for some help.
Best regards
Volker

You are correct: it does not on Mavericks. It was released many many years ago, replaced by Logic Pro 9 and Logic Pro X, doesn't support 64-bit, etc. It is very old software, that doesn't work with the latest OS X version. Not a total surprise...

30EA4 (3.0.03.97) does not correctly work with file names in openvms

Oracle database 10g on OpenVMS, sql*developer 30EA4 Windows XP.
Using the DBA tab in sql*developer, I got the following errors:
disk:[imya.imya.imya]imya_fayla.ext. He writes: name too long
How to do ?

I'm not clear on exactly what your are doing or what the error is that you are getting.
1. Can you describe the steps that you are taking exactly?
2. Is there a stack trace or any more details on the error you are getting?
I will be more than happy to dig deeper once I clearly understand the issue.
Thanks,
Syme

My gps is not working. I cannot use turn-by-turn navigation in google maps. I downloaded a GPS test app and it showed my phone is not locking on any satellites. How can I correct this?

My gps is not working. I cannot use turn-by-turn navigation in google maps. I downloaded a GPS test app and it showed my phone is not locking on any satellites. How can I correct this?

We certainly want to make sure you get the most out of the GPS, wplaxico! Was this tested primarily outdoors? When did this begin? Any other recent apps of updates installed when this started?
Thank you,
YaleK_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

N95 driving directions don't work properly - not r...

I tried out my N95 with driving directions over the last weekend, driving nearly 500 miles, and I'm very disappointed. In excitement I tried a whole lot of routes and it got them almost all wrong.
I paid £45 for the service, and while the basic GPS works, the directions are virtually unusable.
(I'm not sure if this is a UK or international forum - my comments refer to UK)
Dozens of times I'd approach a roundabout, hoping to find out which exit to take, and it would say "At the next roundabout.... [silence]"
Even though I'd select the 'fastest' or 'shortest' route, it would ignore that, and chose only one. I couldn't rely on it.
It kept losing the signal, which I could understand for a multi-function device like this, but then wouldn't re-lock on to a signal. At one stage after losing a signal I drove over 25 miles without it finding a signal again, and I didn't realise it. I only knew it had lost the signal because I got lost.
It has a motorway option, which I chose, but it still took me to a toll road (the M6 Toll) even though I only wanted to go 3 miles and gave me no option to avoid tolls.
I had a Tom Tom before. It was stolen, and that's why I decided to buy an N95 when I needed a new phone. But the Tom Tom was a paragon of virtue compared to the N95.
There were newish roads (open for 6 months or a year) that weren't represented on the N95 map or driving directions. If I buy a fixed GPS off the shelf (like Tom Tom) I can understand that, but a road that's been open for 6 months (and under construction for 2 years) really ought to be represented on an chargeable online service like the N95. Surely they can be updated in days?
I signed up for the directions from the default service, but it didn't say who I was paying. My service provider (T-Mobile) says it wasn't them. They think it was Nokia. I wanted to get a receipt, but pressed the wrong button (it was a new phone, I wasn't familiar with it for chrissakes) and it assumed I didn't want a receipt. But until I get my credit card statement I won't know who I bought it from.
The N95 GPS works more or less as advertised, if you are prepared to stop when you lose the signal, but I feel cheated about the driving directions. Money down the drain. The biggest problem is that I'm now locked into an 18month contract. I don't reccommend the N95 for GPS.
Andrew Denny
www.grannybuttons.com
EDIT: Removed email addressMessage Edited by mercurius on 09-May-2007 08:53 PM

if t-mobile have sold you it as a finished product, and charged you for the usage then i would personally be stomping down to the store and slapping it on the desk and saying something about "doesnt work, not fit for purpose"
I got mine from o2, its an 18 month contract but its only 35 a month, handset was free and no mention of the sat nav software.
If you subscribe from your handset, rather than prepay for a code (as im assuming t-mobile made you do) it allows you to pay for 1 day, 7 day, 30 days, 3 months, annual, 3 years. I think its a couple of quid for a month.
i used navicore with my n73, and once they release an update to use the internal gps, ill probbaly be installing my software on there. Its pretty cheap and very reliable, ive been using it for a year and its as good as any standalone unit (apart from less features).
but back to nokia maps, if you got to the smart2go website, it states its a beta on the title page, if tmobile have charged you for the service or sold you the phone under the pretense of having a fully working tried and tested sat nav product then i would say your within your rights to hand it back
however, try downloading the maps again, sometimes it corrects errors. If you find your still losing the signal, return your phone. most people dont have issues, and the few who have have found their units faulty.Message Edited by dawg on 08-May-200711:02 PM
Message Edited by dawg on 08-May-200711:04 PM
Message Edited by dawg on 08-May-200711:06 PM
nokia N95

GPS does not appear to work with data-roaming off and no wi-fi network

I have been using an application called imarkmyspot to produce way-points for synchronising with my camera. When I am in my home country this works fine and a GPS location is found quickly.
I've recently been abroad and had data-roaming turned off to avoid high expense. The point is that in this situation the GPS does not work (with imarkmyspot or Goggle Maps) unless I can access an open wi-fi network.
So my question is, is this correct? Does GPS only work with either data access on or when within range of an open wi-fi network.
If this is feature (bug) of the iPhone then this makes applications such as imarkmyspot rather useless when travelling. Alternatively it could be imarkmyspot that has this problem of course. But I'm quite sure Google Maps did not work either in this situation either.

The iPhone's GPS does work without a data connection.
Two weeks ago on a work-related trip I knew I'd be traveling a rural highway that would leave me without data/voice from any source for at least 45 minutes (no GSM service). Before leaving a city with data, I zoomed out using Google Maps far enough to show most of my route, then "nudged" the map so the application wouldn't try to get a data update for the map. I simply used the top power button to turn on and off the screen. The iPhone and GMaps tracked me through for the entire blacked-out section of my trip - I made sure the device had a decent view of the sky and it got a fix and nailed the location within a few seconds.
Ironically, I'm returning that device in the next few hours for an exchange. The GPS hardware, it seems, has failed about a week ago - the device gets A-GPS fixes now (it shows the nearby 3G and EDGE towers), but won't lock in for more than a second or two. My iPhone's GPS worked, and now it doesn't - AppleCare told me my GPS hardware has failed - and you're may be exhibiting the same failure.
Some A-GPS devices use their sources to get close by - like my TomTom GO and the ephemeris files it grabs from their servers to get updates on where satellite locations are - and then use the on-board chip to nail the device's position. From what I understand of the iPhone's assistance mechanism, the data tower's and Wi-Fi physical location needs to be correct and available in an accessible database somewhere - my iPhone was showing me near Houston TX (2200 mi/3500 km distant from my actual location) when using 3G data until the data source was updated.

Muse is NOT Working, Illustrator Update FAILS, Apps list is NOT Correct. What Do I Do?

I started having issues with CC a couple months ago out of no where. Mostly just with updates from CC for the apps.
I did the suggested re-installs of CC and then had to try to update by fully re-installing apps and I had funciontality but errors trying to update Illustrator and most of the installed apps did not show up in the CC interface.
Now I try to do a quick update to a site thru Muse and it tells me that it would not validate my subscription and would be canceled in 2 days.
I again followed instructions on Adobe to delete a couple of folders and try to re start Muse.
Now I get an unexpected error and cnont use the program.
I test out CC for updates and the Muse app shows up to date, Bridge app surprisingly updated fine, and as expected, once again, Illustrator errors out on the update and still my CC app list is not correct so I honestly dont know what updates I have to do on the other programs.
I checked my subscription details and everything is fine.
Not having the ability to update efficiently from CC is not a huge deal as long as I can use the programs to work. Not being abel to work because of some programing hiccup is NOT ACCEPTABLE.
Anybody have any possible paths to fix these latest issues?
Should I start by wiping the machine clean of any installs and then completely try to re-install everything?
what a pain.

UPDATE:
I got home tonight and tried to open up Muse.
This time it opened up the login screen and actually made it past the point it errored at previously.
Illustrator update stilll gives an Error 8.

GPS is not working in my n8

after updating it to belle GPS is not working in my device. nothing works right
maps, drive etc dont getting GPS signals.
all apps which needs GPS are not working please help me

Hi Symbianfear, Welcome to the Nokia Forums.
Firstly please be sure that you have activated A-GPS in your phone settings.
If you have already activated it can you please check that you have the GPS access point installed by going into your Settings, connectivity and then access points. If you have already got the access point profile, please delete it, restart your device and re-add the GPS access point.
If you are still experiencing issues with the GPS please perform a soft reset using the code *#7780# security code by default 12345 if prompted, this will not delete any of your data, however it will restore the phone settings as they where when new.
I hope this has helped
Sheldrick
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

I've installed itunes twice. It worked the first time but after I restarted my computer it kept giving me this message: Itunes was not correctly installed. Please reinstall itunes. Error 7 (Windows error 127). What's wrong?

I've installed itunes twice. It worked the first time but after I restarted my computer it kept giving me this message: Itunes was not correctly installed. Please reinstall itunes. Error 7 (Windows error 127). What's wrong?

See the second box in Troubleshooting issues with iTunes for Windows updates.
tt2

Is the gps in the ipad working independently when not having telephone connection? Can I navigate with the ipad on sea?

Is the gps in the ipad working independently when not having sim-contact for internet or telephone? Can I navigate with ipad on sea?

Is there an App for the iPad that will show my GPS present position on a world map,
even when I'm at sea?
Thanks,
Tomac

[Photoshop CS5] Optimize to File Size working not correctly.

******BUG******
Concise problem statement: Optimize to File Size working not correctly.
Steps to reproduce bug:
1. Open any photo.
2. Draw a slice
3. Save For Web, choose Optimize to File Size, type 10KB (Current Slice).
4. Save "selected slices" only
Results: File result larger than expect (over 10KB)
Expected results: <=10KB filesize.
I uninstalled whole Adobe CS5 Master Collection (Trial) & tried to reproduce the bug in Photoshop CS4, but it was not happened, it's ok on CS4.
Finally, Windows 7 is not reason, it's a bug of Photoshop CS5. Please fix, I don't want to buy a bugged software.
I really need the feature "Optimize to File Size" in my works.
P.S: I tested on 4 PCs, and the results is the same.

In the SFW dialog change the Metadata dropdown to None

I have a 4s i upad te to ios7 and the location (GPS) is not working

I have a 4s i upad te to ios7 and the location (GPS) is not working, mapa is working, but cant find places or tell me my location... Can ana One help me ????

Hello James,
The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
Hope this helps,
Thanks
Vijay

Export works not correct in LR5.3; ignore image size.

BUG: The export works not correct in LR5.3 When the field "Dont enlarge" are activated Lightroom ingnores the settings of image sizing and export the pictures in original size. Where can fix it?

Another option, if you're not into using plugins (Exportant) to fix:
Export in 2 groups - those needing resizing and those that do not (e.g. using lib-filters or smart-collections):
* Export those needing resizing normally (but with "don't enlarge" unchecked).
* Export those not needing resizing without resizing.
I mean, re-installing Lr5.2 may be a fine-enough work-around, but so ya know: Lr5.4 is likely to be out soon, with problem fixed...
PS - Get Lr5.2 here:
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh
Rob

N95 GPS is not correctly working!

Similar Messages

Maybe you are looking for