N95 help with ring tones

Hi all
Just received a n95 as a gift but have a problem with the the ring tones.
Ive downloaded a couple of tunes and transfered them from windows media player onto the phone & then to the ring tone list. This is where the problem starts, when i use the tune as my ring tone and someone rings me it plays for about a minute then the call gets diconnected and registers as a missed call
can someone help please
thanks
neil

27-Nov-2008 10:22 AM
neil321 wrote:
Ooops now i feel a bonehead, the phone didn't come with a manual & i didn't bother looking their
Once again thanks
neil
No probs mate.
Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers

Similar Messages

  • Receiving 1 MMS text with ring tones Questions.

    I have a phone that can only have ring tones added via enhanced text (MMS/pics and vid). My questions are:
    1. What is the cost to send 1 of these types of text....does the actual size of the attached ring tones matter?
    2, If the size of files does not matter in regards to cost of this text, what is the maximum amount of kb or mb
       that can be sent in 1 MMS text?   
    I have only sent one of these types of texts via my email account to add 4 ring tones to my phone.  Some of them
    were not loud enough when actually used on the phone.  I would like to add many more to my phone, but want
    to understand the fees I would get if doing so.  I only have the basic $5 monthly text plan feature.  Thanks for your help.

    rich215 wrote:
    Thanks SuzyQ
    Ok.....in regards to my $5 text plan:
    I understand that I can send the pics and vids in a text, I just did not know if I would get charged extra data type fees to send a text like that.  No, they are all text, and part of your 250 messages.
    So then on all the 10 possible blocking settings there are.....as long as I have them all blocked except  "Block Picture and Video Messaging",  I will not be charged any additional fees?  Correct.  The only fee would be per message if you went over your 250 message allowance.
    In regards to sending ring tones via a email from my PC to my phone:
    I will get a $0.25 charge fee for every email sent to my phone with the ring tones added ?  No, this is also a text message, and will come in as a picture message.   I am trying not to get any additional fees charged to my monthly service.  (to do this I have to take off the "Block Premium Messaging"  and or "Block All Data Services"  ?  Same settings as above, you can leave the Premium message block on, make sure picture and video messaging is allowed.  Although it's a sound file, the message is treated as a picture message.
    Thanks again for your help.

  • HELP Unselected ringer tone keeps going off every 5 minutes, how do I stop this!

    Ringer "tune_FurElise" keeps going off every 5 minutes.  Driving me and everyone around me crazy!  This ringer tone has not been selected for anything and/or anyone's contact number.  How do I stop this or how can I delete the Preloaded Ringer Tone "tune_FurElise"???  I have a BB curve 8330, I don't want to do a hard reset if I don't need to.
    Solved!
    Go to Solution.

    Bifocals wrote:
    Could you tell me how you deleted a pre-set ringtone?
    I think you can't. But you can download an application to free up to 5MB, including all images/videos/ringtones that come preloaded with your Blackberry. I don't know it the application allows you to select what you want to keep.
    http://www.berryreview.com/2008/07/02/maxmem-free-memory-optimizer-free-5mb-of-space/
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Help downloading ring tones

    When I try to purchase ring tones from bplay at mobile.blackberry.com for my 8350i, I get an error message that the ring tone is not available for sale in my Country.  I'm in the US and the US is selected as my Country.  I have tried several different ring tones with the same result.  Is there a work-around for this, or another site that will allow me to purchased ring tones?
    Thanks in advance!

    Contact with bplay's support. You can get that from thier web site.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • Help with importing tones to iTunes

    I have several .wav files in my finder that I would love to add to iTunes so I can use them as tones for text or emails.  Is there a way to do this?  I'm using a Mac mini with OS X 10.8.2  Thanks for any help you can provide.

    Are you trying to update with a different computer or iTunes account than what you previously synced to?
    You'll get that warning if you're trying to sync, or restore using a different computer than the one the phone was last originally activated with or last synced to. This will REPLACE whatever is on your phone with what is in the iTunes library on that computer. To avoid losing your apps/media with a new computer:
    1. Authorize the computer in iTunes to your account.
    2. Disable automatic synching on connection: (iTunes) Preferences > Devices > Prevent... from syncing automatically.
    3. Connect your phone.
    4. Right-click the device tab (left side of iTunes screen) and select "Transfer Purchases" to transfer from your phone to the iTunes library. Note that this transfers only media PURCHASED from iTunes, not anything you added from other sources.

  • I know this is a common thing, but i need help with half tones

    This is the problem I have . I am trying to make half tones for screen printing so i need to make solid color halftones to cut down on colors( for example doing a 50% black half tone instead of making a new screen for gray).
    I get how to make halftone gradients and rasterize for illustrator, and using the halftone swatches would work if they had them in higher dpi.
    Can someone help me out?

    function(){return A.apply(null,[this].concat($A(arguments)))}
    I am trying to make half tones for screen printing so i need to make solid color halftones to cut down on colors( for example doing a 50% black half tone instead of making a new screen for gray).
    Just fill your gray objects with a 50% tint of the spot color you are printing. In the Print dialog, specify the halftone screen ruling.
    function(){return A.apply(null,[this].concat($A(arguments)))}
    I get how to make halftone gradients and rasterize for illustrator, and using the halftone swatches would work if they had them in higher dpi.
    Assuming you are printing to a PostScript device, you can print as color separations and specify the halftone ruling, angle, and shape for each ink in the Print dialog. You don't have to use any kind of fake halftone such as Pattern Swatch fills.
    JET

  • Urgent - need help with ring gradient

    Does anyone know how do I apply spectrum gradient to this circle as on pic (its a dry brush stroke that comes with illustrator)
    Please help, i tried everything

    this is in CS5. in CS6 and above you can make life much easier by using a gradient along a stroked circle.
    these are your ingredients: circle with the appropriate brush and a line with a stroke.
    rotate the line about one end however many steps you need for each colour (rotate tool, alt-click on the bottom of the path, use smart guides to pinpoint it).
    change each path to your colours. make a copy of the first colour (orange here) and paste in front (ctrl+F).
    select all the lines. make a blend (ctrl + alt + B).
    select the brushed circle. expand appearance (object > expand appearance). this particular one was a group, and we want a compound path, so I ungrouped it and made a compound path (ctrl + 8). position it over your colour wheel. make sure its in front.
    select both and make a clipping path (ctrl + 7).

  • Need Help with Custon Tones

    Yo, so I know how to set custom ringtones for different contacts and i know all about checking the exceptions box but i cant get the phone to stop vibrating before someone with a custom ringtone calls. I just need to know if there's a way to remove the vibrating option from sutom profiles.

    With the device powered ON, remove the battery a few seconds and replace the battery to reboot.
    Check the settings again--either you are not saving the settings, or you just still have not set them correctly for EACH type of alert for all email accounts... or other notifciation type.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • TS2972 having trouble with ring tone and or ring back tones...i followed all directions and cant access ring tone from my play list.

    having trouble with ringtone and ringback tones ..i followed all directions for home sharing.  does anyone have a real solution???

    Hello sairdoor123
    From what I understand the issue seems to be with the hardware, obviously since the phone was dropped that could cause undesired results.
    If all your data is backed up to a computer then I would recommend doing a hard reset: http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887
    If a hard reset is done then I would caution you with the following choices:  ( Should I have the audio circuit repaired as suggested by one of the repair guys? Or would that be risky?) - I would say this is risky because the person repairing the devise could easily sodder the wrong part of the hardware.
    If you really do think repairing the circuit board is more cost effective then I would recommend researching all your possible repair shops before doing any work. Make sure they have the credentials and experiences.
    Hopefully things work out for you.
    Post relates to: Centro (Sprint)
    Post relates to: Centro (Sprint)

  • Help with ringing UK from USA

    I have just loaded Smart Talk onto our mobile as we are going to the USA shortly. If we want to ring a UK number from the USA using Smart Talk, do we just dial the UK local number or do we still use the international dialling code (0044)? If the latter, do we need to remove the International call bar first?
    Thanks

    pottyperson wrote:
    Just called my daughter from Copenhagen simply using her contact details already stored; the international code is definitely not needed.
    Well done Potters. 
    Now, just for the record, as someone's bound to ask it one day, does it work from within KGB Headquarters inside the Kremlin I'm wondering?
    AQ.
    "Welcome to Royston Vasey - You'll never leave."

  • Txt message w/ ring tone attached

    Hi, all
    I am a newbie to Iphone 3GS. I was sent a txt message with ring tone attachment.
    When I try to open, message appears "movie format not supported".
    Any ideas. I do not have any gray pictures in camera roll nor video file.
    Tks

    I don't think that this is possible.
    Hopefully someone who knows for sure will respond.

  • 8.1.2 upgrade - Ring tones now gone??!

    Hi everyone,
    This upgrade version was intended to restore ring tones tied to the the ITunes Store. The real problem for me now is I NO LONGER have access to all the ring tones that I had created, synched and used just prior to this last upgrade! Kind of ironic seeing as this upgrade was supposed to help resolve ring tone related issues??!  Any insight will be appreciated!

    see Community Specialist Matt's reply here > iTunes ringtones disappear after update
    best Luck!
    Happy Holidays
    ÇÇÇ

  • I need help with my text tone and I have ring tone. no text tone for the 4s.

    I need help with my text tone. I have ring tone no text tone. I have a 4s.

        Hi Sarar2333!  Let's get your text tones working again!
    Here's a link with instructions how to enable and change your alert sounds for your text/notification settings on your iPhone 4S: http://vz.to/1stiF8a.  You can ensure text tones are enabled by selecting a tone in the "Text Tone" setting.  Let me know how that works out for you.  Thanks!
    AnthonyTa_VZW
    Follow us on Twitter @VZWSupport

  • HT201401 Q) Can anyone please help me with this: My in coming call ringing tone not working?

    Q) Can anyone please help me with this: My in coming call-messges ringing tone not working? All I am getting in Vabration + Flashing light when receiveing messages or incoming Calls. I am missing my phone Calls constantly. Please Help me?
    I have just received this phone as a replacement from my insurance company, as I had lost my own phone. It has taken them 3 weeks to sort this out. This has ruined my business because it has taken so long. I really do not have time to send it back to them. Because it will waist another three weeks for them to sort it out again. Please Help!

    HA! By Jove I've Got it! it was simples..
    TURN ON THE RINGING ON / OFF BUTTON ON THE SIDE OF YOUR PHONE JUST ABOVE THE VOLUME BUTTONS. THEN MAKE SURE THE VOLUME IS UP TO THE HIGHEST. NOW JUST TRY THIS!
    I ALSO LOOKED UP A MANUAL ON IPHONE4:
    Ringtones, Ring/Silent switch, and vibrate
    iPhone comes with ringtones that sound for incoming calls, Clock alarms, and the Clock timer.
    You can also purchase ringtones from songs in iTunes. See Chapter 22, iTunes Store, on page 94.
    Set the default ringtone: Go to Settings > Sounds > Ringtone.
    Turn the ringer on or off: Flip the switch on the side of iPhone.
    Important:  Clock alarms still sound even if you set the Ring/Silent switch to silent.
    Turn vibrate on or off: Go to Settings > Sounds.
    Assign a different ringtone for a contact: In Contacts, choose a contact, tap edit, then tap
    Ringtone and choose a ringtone.
    For more information, see Sounds on page 139.
    THE REASON MY PHONE HAD NO RING TONE, WAS SIMPLY BECAUSE THE VOLUME WAS TURNED DOWN. :-/
    I HOPE THIS HELPS OTHERS INFUTURE!   :-D

  • N95 problem with ''Help'' application

    Dear all,
    I've update recently my N95 with new software release 20.0.015, but the problem with help application is not resolved...The problem is the following: when I try to open HELP I receive the error message MEMORY FULL, but my free RAM is 23/24 MB and the free memory on the device is 112 MB. Can you help me to resolve this problem?
    Thanks

    I have the same problem - no in any applications or using the Help application itself.
    Of possible interest ?>: is a 'help folder' I have with a name displayed in the Help application as 4x boxes.
    Using: -Menu -Tools -Utilities -Help
    ...I have an odd looking file listed at the end (after 'ZipManager' & before '3-D ringing tones'). The name is displaying as 4 x boxes - presumably non display characters ?>
    Is this folder on all N95s ? (i.e even those with a working Help) ?
    Anyone know how/where to locate this folder ?
    HammY

Maybe you are looking for

  • Does Adobe Reader for iOS and Android Support Encryption with PKI Solution?

    Hello there, I have been searching for an answer whether or not Adobe Reader for iOS and Android can read encrypted PDF files by public key infrastructure solution (encrypted by a public key, to be decrypted by its private key pair), but to date I ha

  • IPhoto sees double pictures on iPhone

    Hi, I connected my iPhone 5s (iOS 8 latest version) to my Mac (OS Yosemite latest version). When iPhoto (ver. 9.6) automatically opens it sees a double copy for every pictures stored on the iPhone. Theres a way to solve this problem? Thanx.

  • How do I pause a subvi from a mager program without stopping the mager program

    Hello to you all I am having a problem and i hope that you can help me, i am traying to make a sub vi to be paused (after it had started to run) at any time that the mager program neads to pause the sub vi. what i mean is that the mager program is ru

  • Converted Word Doc Turns Blue

    Hello, I have converted many Word documents to PDF, using the plug-in in my Word 2007 program. However, just today I converted a Word doc to PDF and the resulting PDF was entirely shaded in blue. I cannot get rid of the blue color and tried different

  • Good OO Swing Design

    I have been programming with Netbeans for a while now, and would like to know the best method / practices in keeping good OO design to a MDI Swing application. I understand the concepts of OO programming and have been able to code good design using s