N95: how to save COMMUNICATION LOG on PC

As I can see on seach results, there is no way to save communication log by PC Suite.
May be, anybody tried to get this log from backup copy?
Anyway, I hope to see in next version of PC Suite such command as "Save your log"
Best regards to Nokia programmers!
Paul
Solved!
Go to Solution.

I've found the solution for this problem. It's a tiny (26kb) application called LOG EXPORT. You can download it at adres:
http://mosh.nokia.com/content/432396B1AABC059FE040050A443073E3
I've just tested it on my N95 - it works!!! LOG EXPORT also can work on N73, E51, N82...
Best regards, Paul
PS Sorry for my English

Similar Messages

N95; how to save everything to sim?

I have a nokia n95 and my screen has gone blank, so I put my sim in another phone and nothing was saved to my sim, so I was wondering if someone could tell me how to save everything to my sim step by step so I haven't lost everything on my phone. Please. ?

You can't save "everything" to your SIM. The SIM will only hold a limited number of contacts with each one's name a maximum of 16 characters long, and only one number per contact. Contacts with multiple numbers will be converted into multiple contacts, one per number with a different suffix. E-mail addresses, contact photos and postal addresses will be lost.
Your best bet is to use PC Suite or OVI suite to back up your phone's entire content. When you connect the phone to your PC it will ask you which mode to use. Since you can't see the screen you can only guess at what it's displaying. Start by simply pressing the "select" button in the middle of the D-pad and seeing if that connected the phone in PC Suite mode. If it didn't, then disconnect it again (using windows' "disconnect removable device" tool in the system tray if applicable), reconnect the phone, scroll down once and then press "select". If that still doesn't work then disconnect, reconnect and scroll down twice before pressing "select" etc.
You will then be able to perform a full backup and thus keep all your contacts with all their information, your settings and everything else.
Note that this data will only be able to be restored to another Nokia device, and the settings will only be restored on an identical Nokia device.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

How to save change log for a particular standard table in ZTABLE

Hi Experts,
Wouldlike to make one ztable in R3 which should record changes made( say particualr field) in standard SAP DB table ( say TXPDAT). I think that there has to beway to do it.
Could you please share the way to achieve it?
Will appreciate a quick reply.
Thank you
Best Regards

Hi,
or else do like this...
In order to maintain the log changes the main pre reuisite is to checkmark the checkbox in dataelement of table filed.
To do this...
goto transaction SE11>enter ur table name>cleck on fields tab>cleick on dataelement->click on Furthercharacterstics tab-->select the checkbox'Change Document'.
If u dont select dis the u cannot see the log entry of the particuylar field..Do like this for each dataelement for each table field...selecting all the fields is not mandatory..u can choose the table field u want to see the log report..
Once u done with dat...
Goto SCDO transaction> click on create>give a name change doc startwith Z or Y only>Follow the prodedure and in-->name of table field>enter u r TABLE NAME->click on individual field checkbox.--->insertentries..
Once u done with dis..
Goto SE16->enter CHDIR or CDPOS->press ENTER->enter u r object id>F8
U can see the new and old value of a table entry.....

How can I save my Log files (and other my own files) to windows azure ?

Hi ,Dear all
I am migrating an Asp.Net Web App to Windows Azure. It runs in IIS
In that Web App,it will:
1. save log files to a virtual path (for example, save to $WEBAPP_ROOT_DIR/LOGFILES/
2. save ViewState by session as temporary files to a virtual path (for example , save to $WEBAPP_ROOT_DIR/VIEWSTATE/
3. upload some image files to the web server virtual path at $WEBAPP_ROOT_DIR/UPLOAD/
so, when I migrate the web app to windows azure,how can I do the same job in my code?It seems so many great changes in my code ...
Any ideas and suggestions for me ? many thanks!

hi Eric,
If you use Azure website, you can save your log and files into azure storage service ,such as blob or table.
If you use VM to host your service, you can only attach a data disk or file service on your VM and save your data into data disk or file service.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to save all event viewer log files in Windows 7 Professional

Hello,
I would like to save all Event Viewer logs from my Windows 7 Professional computer and be able to view them from another computer. Currently I can only save one log at a time. Please let me know how I can save all Event Viewer logs
(Windows Logs, Applications and Service Logs, etc.).
Thanks,
Jason

Hi Jason,
There is no idea to save all categories log.
It's recommend you ask in Official Scripting Guys forum for further help:
http://social.technet.microsoft.com/Forums/en-US/home?forum=ITCG
Besides that, this thread could be referred:
http://social.technet.microsoft.com/Forums/en-US/d66c1bd7-0e61-4839-a5f6-cbe29661dccb/how-to-use-script-saving-log-from-event-viewer-into-csv-file?forum=ITCG
Karen Hu
TechNet Community Support

How to save the USMT logs to MDT server during OSD

hi ,
How can i save the USMT logs ( scanstate and loadstate) to MDT server .
I am using below swtiches for Scanstate and Loadstate in CS.ini. What switches i have to use to save theses logs to MDT server i.e network location.
ScanStateArgs=/v:10 /o /c
LoadStateArgs=/v:1 /c /lac
Shailendra Dev

Try setting in your customsettings.ini rule file the following:
SLSHARE=\\MDTServer\Logs$\%ComputerName%
Replace MDTServer with your MDT DNS server name.
Of course you need to create the Logs$ share and set proper permissions
It will copy the deployment log files at the end of the deployment to that location.
Then look in ZTIUserState.log
If you need real-time debugging consider using the SLShareDynamicLogging
property
You can use both:
[Default]
SLShare=\\MDTServer\Logs$\%ComputerName%
SLShareDynamicLogging=\\MDTServer\Logs$\%ComputerName%

I have vista, and I have to log in everytime to everything, how can I save my log in?

whenever I start Firefox I am unable to save the log in

Hi,
where/how exactly did you change your account holder name?
thanks,
Ignacio

I need to erase the contents of my phone and restore to factory settings. Does anybody know how to save your texts so you don't lose them? Can I back those up to iCloud? My phone was very likely hacked (Apple's advice was to call the police!)

"I need to erase the contents of my phone and restore to factory settings. Does anybody know how to save your texts so you don't lose them? Can I back those up to iCloud? My phone was very likely hacked (Apple's advice was to call the police!)"
That was all I could put in the initial "box." Then it brought me to this page with instructions on how to write a good sentence.
Proceeding ...
After going back and forth between Apple, AT&T and the police (all telling me to go to the other two) I took AT&Ts suggestion and got a new number. One tech warned against doing a backup, especially on my Mac, saying if my phone had been hacked then whatever bug was there would then invade my computer. But nobody knows how to determine if the phone has been hacked or a virus was planted there. Unfortunately I know who would have reason to do such a thing and all I can say is that he is at the top technologically and could easily do it. Almost impossible to prove, however.
So I need to preserve my text messages and my emails as well. I backed up my photos to that Microsoft product (One-Drive) and it froze (Surprise, Surprise) with four short videos to go, and no way of stopping that (when I tried it crashed repeatedly) so I'm in crisis mode here.
Help ...
Running 8.0 on 5S
Thanks!

Betty I don't know if you fixed your hacking problem but I feel your pain. I've seen some strange things going on between my iMac and my iPhone and Apple has told me the same thing, call the police which I have done. The hackers have stole 500.00 out of my checking account have access to every internet account I use and no matter how often I change the password their right back on the account. I closed my FB account 3 times only to have someone reopen it. Right now I've got a link in my reading list (Safari) that if I click on it, it allows me to log onto my FB account anonymously.
I've seen a green folder come out of no where while I was trying to delete my passwords out of keychain when that green folder was put into the key chain I was immediately locked out. I than went into system preferences to try to make changes to my security settings, when I clicked on the icon it wouldn't open. I've seen log files of automator receiving commands and sending out my personal information thats on my computer.
I have a legitamate program called iExplorer that allows you to look at the contents of your iPhone back ups and saw a transaction someone made at the Apple store for some full length movies, some albums, ibooks and other apps but when I called the iTunes store and they said none of those items were showing up on my account. If their not on my account how can they be on my iPhone 6? One day someone was using my gmail account and unknowingly used google maps to search for an Italian restaurant, than a Mexican restaurant than a coffee shop and their search showed up on my iPhone but I didn't have my gmail account installed on my iPhone 6. Using my computer I logged onto my gmail account and looked at the maps history and sure enough there were the searches when I'd hover my curser over the link it gave me the longitude and latitude of the where the hacker was when he was using google maps. I know whoever reads this thinks Im crazy but I've documented everything and can prove the things that I have mentioned in this post actually happened.
One day I had my laptop (pc) and my iMac next to each other as I was using both. when I clicked on airport it showed that my laptop and my iMac had made a connection and were actually communicating with each other. I know I didn't do it I don't know how. The iMac was logged into my iCloud account while my laptop wasn't. I have formatted my iPhone at least a dozen times, Apple and an Apple retailer have formatted my hard drive not to mention the numerous times I have formatted it but the hackers keep getting on my devices. Im formatting my lap top at this very second because during the course of the night I left the ethernet cable plugged into it and they locked me out of my c: drive, and configured the system so I can't download any updates from Microsoft, overtime I type in www.microsoft.com it changes to ww38.microsoft.com which takes me to a blank page. I right clicked on the page I was redirected to and read the java script and couldn't believe that someone had actually configured Internet Explorer to redirect me to a blank page when I tried to go to Microsoft. Apples answer to all this is there was nothing wrong with my iPhone or my iMac and if I thought there was a problem to call the police which I have done.
Theres no doubt the hackers are reading this while I type it or will read it and I simply don't care anymore. I no longer email anyone, don't use my iCloud account and have taken precautions to protect my credit but if I ever find out who has invaded my privacy to this extreme the police are going to want to talk to me because Im going to hurt them like they've never been hurt before

How to save a datas from serial port?

How to save a datas from serial port?

Hi
I need some help about rs-232 communication. I want to make a vi witch can do this things:
-read a txt file (to simulate a serial port like when the datas are coming)
i will get 3 different data in serial port (like this: 121 213 135)
i want to save in a txt file what datas get my vi
so
-write in a txt file or draw in a diagram (or both)
so my problem is: read in serial port and save in a file and draw a diagram.
if anybody can help pls HELP ME because im a beginner in this problem.
I already do something but Im not sure that good.
Thx for all.

How to output java logging only to a log file except stderr?

I create a file logging and noticed that java logging output a log file and stderr simultanously. How to output the logging message only to the log file?
Thanks.

HarishDv wrote:
I dont have indesign installed on my system. I only have the binary , which needs modification and i have to save back to the DB as indd.
Can't be done, for a realistic assessment of "can". InDesigns documents cannot reliably be created or modified without InDesign itself. (*)
If you need to do this on native InDesign documents, you have to buy and install it.
* "Not true, there is always IDML". But that's not a 'binary'; and you cannot (**) "convert" a binary INDD to IDML and back again without InDesign.
** Again, for a remotely realistic value of "can".

How to save status bar background color in local settings(Windows Phone 8.1)

I have given the user the freedom to change background colour and save it in local settings. But I am confused on how to save the status bar colour settings because I want to give the user the freedom to choose from 4-5 colours where background of status bar
can be changed.
public static void SaveStatusBarColor()
// get status bar color
var statusBar = StatusBar.GetForCurrentView();
var color = statusBar.BackgroundColor;
// convert color to hex string
var hexCode = color.HasValue ? color.Value.ToString() : "";
// store color in local settings
ApplicationData.Current.LocalSettings.Values["StatusBarColor"] = hexCode;
public static void LoadStatusBarColor()
// get color hex string from local settings
var hexCode = ApplicationData.Current.LocalSettings.Values["StatusBarColor"] as string;
if (string.IsNullOrEmpty(hexCode))
return;
// convert hexcode to color
var color = new Color();
color.A = byte.Parse(hexCode.Substring(1, 2), NumberStyles.AllowHexSpecifier);
color.R = byte.Parse(hexCode.Substring(3, 2), NumberStyles.AllowHexSpecifier);
color.G = byte.Parse(hexCode.Substring(5, 2), NumberStyles.AllowHexSpecifier);
color.B = byte.Parse(hexCode.Substring(7, 2), NumberStyles.AllowHexSpecifier);
// set the status bar color
var statusBar = StatusBar.GetForCurrentView(); // Exception Line
statusBar.BackgroundColor = color;
}This is what was suggested to me. Initially the app runs and saves the settings.But when the app is closed and restarted again it crashes.

Hi shriyansh,
Where did you call the method SaveStatusBarColor() and LoadStatusBarColor()?
I have called your SaveStatusBarColor() in the OnNavigatedFrom method and called the LoadStatusBarColor() in the OnNavigatedTo method, it worked very well in my side.
So I can not reproduce your issue.
Here are my code and result, please try to check it:
public class test
public Color colors { get; set; }
public sealed partial class MainPage : Page
List<test> testdemo = new List<test>();
public MainPage()
this.InitializeComponent();
testdemo.Add(new test() { colors = Colors.Red });
testdemo.Add(new test() { colors = Colors.Green});
testdemo.Add(new test() { colors = Colors.Gray});
testdemo.Add(new test() { colors = Colors.Blue });
this.NavigationCacheMode = NavigationCacheMode.Required;
public static void SaveStatusBarColor()
// get status bar color
var statusBar = StatusBar.GetForCurrentView();
var color = statusBar.BackgroundColor;
// convert color to hex string
var hexCode = color.HasValue ? color.Value.ToString() : "";
// store color in local settings
ApplicationData.Current.LocalSettings.Values["StatusBarColor"] = hexCode;
public static void LoadStatusBarColor()
//get color hex string from local settings
var hexCode = ApplicationData.Current.LocalSettings.Values["StatusBarColor"] as string;
if (string.IsNullOrEmpty(hexCode))
return;
// convert hexcode to color
var color = new Color();
color.A = byte.Parse(hexCode.Substring(1, 2), NumberStyles.AllowHexSpecifier);
color.R = byte.Parse(hexCode.Substring(3, 2), NumberStyles.AllowHexSpecifier);
color.G = byte.Parse(hexCode.Substring(5, 2), NumberStyles.AllowHexSpecifier);
color.B = byte.Parse(hexCode.Substring(7, 2), NumberStyles.AllowHexSpecifier);
var statusBar = StatusBar.GetForCurrentView();
statusBar.BackgroundColor = color;
statusBar.BackgroundOpacity = 1;
protected override void OnNavigatedTo(NavigationEventArgs e)
LoadStatusBarColor();
protected override void OnNavigatedFrom(NavigationEventArgs e)
SaveStatusBarColor();
private void ChangeColorButton_Click(object sender, RoutedEventArgs e)
var statusBar = StatusBar.GetForCurrentView();
statusBar.BackgroundColor = testdemo[Convert.ToInt32(Mytextbox.Text)].colors;
statusBar.BackgroundOpacity = 1;
The result:
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to save the value in Cedit control into a text file bu using measurement studio c++?

Im using measurement studio c++ to create a application. How to save a randomly generated value which display in the CNumberEdit Control to a text file? how to do the coding part?

You can use the CNiFile class to write the value out to a file. For example, create a new Measurement Studio C++ project and follow these steps:
Add a CNiNumEdit to the dialog.
Add a member variable for the CNiNumEdit called m_numEdit.
Add a button to the dialog.
Double-click the button to add a message handler for the button's BN_CLICKED message.
Add the following code to the button's BN_CLICKED message handler:
CNiFile file("C:\\Values.log", CFile::modeCreate | CFile::modeWrite | CFile::typeText);
file << m_numEdit.Value << endl;
file.Close();
Run the application, edit the CNiNumEdit's value, and click the button. The value should be written to the Values.log
file as specified in the code above.
Hope this helps.
- Elton

How can I automate log and capture in Final Cut Pro

Does anyone know of a way to schedule the log and capture of video in Final Cut Pro with a script or software application, so that it doesn't have to be done manually?
I am using a capture card in my Mac to record college lectures for our department and it's not always possible for me to be there to start the capture. Our lectures occur on a regular schedule.
I am a new Mac user and I'm also new to Final Cut Studio 2. Thanks for any help on this topic!

In Automator, all the apps you can automate are listed in the far left hand pane. Click on the QT Player icon there to see the "Actions" available for it. In that list you should see "New Video Capture" and "Start Capture". First drag "New Video Capture" to the big pane on the right, where you assemble your workflow. Then drag the "Start Capture" action beneath that. You're basically done.
How to Save and Schedule this can be found in the Automator Help, when you search on "iCal":
1. Choose File menu > Save As Plug-in.
2. Choose iCal from the "Plug-in for" pop-up menu.
3. Click Save. Automator opens iCal and creates an event that calls the workflow at the scheduled time.
4. Name your event and set the date and time for the workflow to run using the pop-up menus in the info drawer.
You'll need to do another "workflow" to Stop the recording. All you need is the "Stop Record" action in the workflow - then save the same way as listed above.
Just note - I've used this process before and the QT movie generated, despite being recorded as "Camera Native" - was not editable in FCP. In fact, I don't even think I could import the final QT into FCP - let alone edit it. If editing's necessary maybe someone else can offer up another step to enable it. It was not necessary for my exact application, so I never explored it.
Good luck.

How to save files on the server?

I want to save a log on the server, how can I do this using Oracle?
In SQL Server I used the "bcp" command.
Thanks.

as forbrich suggested you can use the UTL_FILE built-in package. here is an example code to read and write to a file.
CREATE OR REPLACE PROCEDURE Read_Write_File (pvInFile Varchar2,
                                             pOutFile Varchar2) IS
vInFile   utl_file.file_type;
vOutFile utl_file.file_type;
vNewLine VARCHAR2(4000);
x         PLS_INTEGER;
vFlag BOOLEAN := TRUE;
BEGIN
-- assuming Your_Directory is $HOME/myTxtFiles in a Unix Platform
-- to check if definition is existing Select Directory_Name, Directory_Path From All_Directories;
vInFile := utl_file.fopen('Your_Directory',pInFile,'r');
vOutFile := utl_file.fopen('Your_Directory',pOutFile, 'w');
IF utl_file.is_open(vInFile) THEN
    LOOP
      BEGIN
        utl_file.get_line(vInFile, vNewLine);
        x := utl_file.fgetpos(vInFile);
        dbms_output.put_line(TO_CHAR(x));
        utl_file.put_line(vOutFile, vNewLine, FALSE);
        utl_file.fflush(vOutFile);
        IF vFlag = TRUE THEN
          utl_file.fseek(vInFile, NULL, -30);
          vFlag := FALSE;
        END IF;
      EXCEPTION
        WHEN NO_DATA_FOUND THEN
          EXIT;
      END;
    END LOOP;
    COMMIT;
END IF;
utl_file.fclose(vInFile);
utl_file.fclose(vOutFile);
EXCEPTION
WHEN others THEN
    RAISE_APPLICATION_ERROR (-20099, 'Unknown UTL_FILE Error');
END;
/

How to save the changes of trackpad in gest account ?

how to save the changes of trackpad in gest account because every time that i change them and restart it, it lose the changes ...

Hey cccosmas,
Thanks for the question. The following article provides an answer to your question:
OS X Mountain Lion: Set up guest users
http://support.apple.com/kb/PH11321
When guests log in, they don’t need a password. While logged in, they can’t change user settings or computer settings.
Important: Files created by a guest user are deleted when the user logs out. A temporary home folder is created for the guest user’s files, but this folder and its contents are deleted when the user logs out.
If you require these settings to be modified and retained in a secondary account, it may be best to setup a new user account:
OS X Mountain Lion: Create a new user account
http://support.apple.com/kb/PH11468
Thanks,
Matt M.

N95: how to save COMMUNICATION LOG on PC

Similar Messages

Maybe you are looking for