N95 - Infrared Process Runs in Background Flatteni...

After running the infrared to sync Outlook and removing the phone it eventyally stopps the infrared connection (well so it would seam untill)... The N95 then continues to heat up and eventually flattens the battery. I can only presume that the infrared process is not fully turning off.
Is there a way to stop the infrared process without re-booting the phone?
Hopefully this will be fixed in a new firmware version that gets authorised by Orange in the UK.
Phone: N95
FirmW: 10.0.0.18
Supplier: Orange UK

Discussing things like that is not allowed here, and yes, it will void both the Nokia warranty and any guarantee with Orange...
Infra-red has never had an "off" switch or anything on Nokia phones, on any of the phones, it's always active for about 10-15 seconds before it switches itself off.
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Similar Messages

How to have Weblogic and BAM process run in background

I ssh to the Weblogic (also the BAM) server via putty and use below command to start the weblogic and BAM:
/opt/oracle/Middleware/user_projects/domains/base_domain/startWebLogic.sh
/opt/oracle/Middleware/user_projects/domains/base_domain/bin/startManagedWebLogic.sh bam_server1
And then I have no way to have the weblogic and BAM run in backgroup as it needs to ask me for login and password. I cannot close the ssh connection neither otherwise the weblogic and BAM processes will die
Clay

Hi Clay,
Both these points can be easily handled.
To start admin server enter the below command with the &. This & will make the process run in background.
. /opt/oracle/Middleware/user_projects/domains/base_domain/startWebLogic.sh &
If you want the logs to be redirected to some file then you can use a nohup as given below
nohup . /opt/oracle/Middleware/user_projects/domains/base_domain/startWebLogic.sh &
Same holds good for bam serevr also
. /opt/oracle/Middleware/user_projects/domains/base_domain/bin/startManagedWebLogic.sh bam_server1 &
OR
nohup . /opt/oracle/Middleware/user_projects/domains/base_domain/bin/startManagedWebLogic.sh bam_server1 &
It will respond to you with the process-id, you can just hit an enter and safely close the putty session while the server is still up & running.
To stop the same, in a new putty session you can enter the below. Here you need not(will not) give &
. /opt/oracle/Middleware/user_projects/domains/base_domain/stopWebLogic.sh weblogic welcome1 t3://hostname:port
. /opt/oracle/Middleware/user_projects/domains/base_domain/bin/stopManagedWebLogic.sh bam_server1 t3://hostname:port
Password:
As you see above we are not passing user-id/password while starting the server. We need to create a file named boot.properties and place it in /opt/oracle/Middleware/user_projects/domains/base_domain/servers/AdminServer/security directory. security directoy will not be present, you have to create it.
Contents of boot.properties file will be only 2lines as below
username=weblogic
password=welcome1
On next startup server will encrypt the password.
Same boot.properties file has to be created in /opt/oracle/Middleware/user_projects/domains/base_domain/servers/bam_server/security location.
Hope this answers your question.
Thanks,

Comand line to know what process run in background

Hiya all,
I need to know the command line to know how many apps, and what kind, run in background on my iMac.
Thx in adv
Parsipal

Welcome to Apple Discussions, Parsipal.
Try *ps aux | less* or *ps -ef* for an expanded list. You really should be asking in the Unix Forum.
http://discussions.apple.com/forum.jspa?forumID=735
This can be a bit tough to Find because it's under +Mac OS X v10.6 Snow Leopard > Using Mac OS X 10.6 Snow Leopard+
-mj

N95 8GB Applications running in background

I have an N95 8GB. I keep getting the message "Gallery, Memory Full. Close some applications and try again."
I have 93.76 mg phone memory free and 7.13 GB memory card free so that shouldn't be a problem.
How do I find out what applications are running as I can't see anything obvious?
Thanks
N95 8GB

Pressing and holding the menu button will bring up a list of applications currently running. If you goto, File manager, select Phone memory then Options>Details>Memory will give you a breakdown of how your memory is being used.
Possible fix for this is to reformat your phone using the *#7370# code. If you decide to try this, you will lose all data on your phone so remember to backup. Use OVI suite if you have DRM material you want to preserve.

When MRP run through background process in MDBT open PR and PO not comming?

Hi,
When MRP run through backgroung process in MDBT open PR and PO not coming in MDBT result.
Pls advise accordingaly.
Regards
rk

Ram,
Either I am totally misunderstanding your statements, or your business people are misinformed.
The output of MD01 (MRP total run in foreground) and the output of MDBT (MRP total Run in Background) ARE IDENTICAL, provided you have selected the same parameters.
Neither output contains a discrete listing of open Purchase orders and Purchase requisitions.
Standard output of both MD01 and MDBT are:
1. List of materials processed, with exception messages
2. Statistics
In addition, both of these programs also write MRP records to the MRP databases, provided that the "Display Material List" parameter is set. In this case, both of these programs will produce data that can be further reviewed and managed in MD05 and MD06. MD06 is the tool that most planners use to process the MRP database info.
If you wish to see a listing of the entire MRP results (either MD01 or MDBT), then execute transaction MDLD. This will produce either a spoolfile or a printed document.
For the PO or PR listings, review my earlier suggestions.
Rgds,
DB49

After closing large documents (drawings) the window closes but the process runs still in the background. I open the next document, the same procedure and after dowing this several times the RAM is full the system becoms very slow. what can i do???

after closing large documents (drawings) the window closes but the process runs still in the background. I open the next document, the same procedure and after dowing this several times the RAM is full the system becoms very slow. what can i do???

You can always shut it down manually via the Task Manager
(CtrlShiftEsc)...
On Mon, Sep 1, 2014 at 3:05 PM, frank koethen <[email protected]>

How to create a process which is running in background?

I am developing an application which creates a data file after some queries are done. The user sees a message saying that the data file is being preparing and a email notification will be sent to the user. I would like to have the process for creating data files run in background so the user does not wait till that process is done.
Could someone give me some ideas or suggestions how this should be done?
Thanks in advance!

You could use a servlet and run a seperate thread to complete the process. An easier way is to use an IFRAME. You can direct a page to run in an IFRAME that is 0 width X 0 height. The user could then continue on without having to wait on the process to complete.

In FCP x backup process is constantly running in background even though its done which results into slow working of FCP x. any idea to resolve the issue. I am using 10.1.3 and facing the problem ever since i have updated my FCP x to 10.1.3

in FCP x backup process is constantly running in background even though its done which results into slow working of FCP x. any idea to resolve the issue? I am using 10.1.3 and facing the problem ever since i have updated my FCP x to 10.1.3

Go into preferences and under playback turn off background render. That helped speed things for me when working with large files.

Photoshop CS6 still running in Background Processes, won't close

Lately, I've been having a problem with Photoshop CS6 where, even after I close the program, Photoshop.exe is still running under Background Processes in the task manager. Hitting "end task" on the program doesn't do anything. It takes up quite a big portion of my processing power, and it usually closes on its own if I just wait a good 5-10 minutes. Even weirder, while this "Ghost Photoshop" is running in the background, I can launch a new version of Photoshop, that will run at the same time without any trouble (aside from the expected slowness when a chunk of my processing power is being eaten up by whatever Ghost Photoshop is doing). I'm running Photoshop CS6 on Windows 8, with just one extension installed-- Coolorus 2.0.

They were using the little red "x", file > quit allowed her to reopen the program etc. I find it weird that it wont close with the "x" but if I right click the icon on the task bar, it wont allow me to reopen or do anything with it so I was under the assumption it was stuck open.

How do I run a background process which is under WLE control

Hello folks:
How can I run a background process that runs under WLE's control.
What I am looking for is a way to have a process that runs in an
infinite loop and polls the database to see if there is any background
work that needs to be done. But I still want the process to be managed
by WLE for fault tolerance.
Thanks,
Ram Ramesh
[email protected]

The easiest way to do this is to write a Tuxedo server (i.e., using only
ATMI and no CORBA stuff) that does the following:
1.) In tpsvrinit(), the last thing that it should do is a tpacall to the
service contained in this server (and nowhere else) with the TPNOREPLY
flag.
2.) In the method that implements the service, do your database work, sleep
for a little while, do another tpacall to itself with the TPNOREPLY flag,
and return.
Hope this helps,
Robert
Ram Ramesh wrote:
Hello folks:
How can I run a background process that runs under WLE's control.
What I am looking for is a way to have a process that runs in an
infinite loop and polls the database to see if there is any background
work that needs to be done. But I still want the process to be managed
by WLE for fault tolerance.
Thanks,
Ram Ramesh
[email protected]

Report program when run in background job getting cancelled immediately

Hi
When i run a program in foreground i am able to see the output. But when run in background not able to run the job successfully. The job is getting cancelled immediately.
I am using the below function module for output display. Should i need to pass any parameters in the below function module so that i can run the program in background successfully.
CALL METHOD DETAIL_GRID->SET_TABLE_FOR_FIRST_DISPLAY
      EXPORTING
        IS_LAYOUT         = IS_LAYOUT
        I_SAVE            = 'A'
        IS_VARIANT        = GS_VARIANT
      CHANGING
        IT_FIELDCATALOG   = IT_FIELDCATALOG
        IT_OUTTAB         = BLOCKED_STOCK_TAB_ALV[].
Please suggest.
Thanks and regards
Rajani Yeluri

Hi Rajani.
ALV require the DRYPOR(screen) for display but incase you run in back ground which have to write to spool but in spool we can only write in format of LIST REPORT not inter-active report like ALV. That why
system cancelled your process immediately.
Hope it helps.
Sayan.

How to download file to local system when report is run in background?

Hello all,
Can anybody tell me how can we donwload file into local machin when the program is running in background?
thanks

Hi,
We can't communicate with presentation server while processing in background.
if needed we can do this by creating RFC destination and doing some setting in Desktop system.
[Reference document|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9831750a-0801-0010-1d9e-f8c64efb2bd2]
Regards,
Amal

System is showing time out when run in background

Dear all,
We have two systems: One R/3 and EBP. We have made one report where the remote function module will be called from R/3 to EBP. There are 4 lakhs data in SAP. We are sending 10000 data as package in internal table and getting the corresponding output. But the system is showing time out when the report has run in background. Can you please suggest how the process can be improved so that the timeout can be avoided.
Thanks and regards,
Atanu

Hi,
Try to fetch records in smaller chunks and process them. For example, if you are trying to fetch records for one year, instead of single query, try to fetch in 12 sets for each month. Fetch first month and process the records and put them in the output internal table. Then go for next month and so on. Anyway your program is running in background. There will not be any user complaint also. The solution might sound bit funny. But it works.
Regards,
Hema

Amount field getting rounded up when run in background

Hello All,
when i run a report in foreground the amount value(KBETR) is displaying properly with the value 12.78.But when the same report is run in background it is displaying 13.what should be done?
Thanks,
Rakesh.

Hi,
Try to fetch records in smaller chunks and process them. For example, if you are trying to fetch records for one year, instead of single query, try to fetch in 12 sets for each month. Fetch first month and process the records and put them in the output internal table. Then go for next month and so on. Anyway your program is running in background. There will not be any user complaint also. The solution might sound bit funny. But it works.
Regards,
Hema

Ability to schedule a report to run in background but No access to transact

Hi,
I want to give users ability to schedule a report to run in background but No access to transaction Sm37.
What can be the process/steps to work and morever if we do this is there any disadvantages that users
can face later...
<removed_by_moderator>
Thanks,
Barada
Edited by: Julius Bussche on Jan 28, 2009 1:12 PM

Sorry, I misread your question - thinking that the report should only be run in the background.
I agree with the others (also about SMX and SMXX to display their own jobs, but not change them afterwards), but which report (tree) is this?
You can still give the user an ability to maintain a variant via transaction VARCH though (no execute possibility) . It will check S_PROGRAM p_action VARIANT or look for a user specific protection flag.
But then the user can submit it online as well from other transactions. That is why I thought you were looking for a way to run it as low priority in the background only.
Cheers,
Julius

N95 - Infrared Process Runs in Background Flatteni...

Similar Messages

Maybe you are looking for