N95 kepps saying everything is in use!

Yesterday my N95 stopped allowing me to surf the web. So I saved all data onto memory card and did a factory reset which got rid of everything and restored factory settings.
However now when I select anything I just get the ! message saying it is already in use. For example I go to my contacts book and it says: Contacts already in use. I go to my messages and it says: Messaging already in use. I go the gallery and it says: Gallery already in use.
I'm absolutely sick of this phone now, I have had nothing but trouble with it!
Can anyone help me??

Hi Lorelei
After you reset N95 did you try it without memory card in place first?
If it works without memory card then it points to corruption of data on the memory card.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

Can't reload Photoshop elements 7 on my windows 7 operating system. Everything goes well and it appears to be installing. All of the sudden the Installer starts to roll back everything and error message shows up saying I can't use this product at this tim

can't reload Photoshop elements 7 on my windows 7 operating system. Everything goes well and it appears to be installing. All of the sudden the Installer starts to roll back everything and error message shows up saying I can't use this product at this time.

How do I do that? I'm the only user on the laptop - I kind of assumed I already was running the install as the admin.

I have a backup from an old iPhone that won't delete it says it's in use?

I Bought an iPhone 6 + set it all up and restored it from icloud but it just kept on running restore after it was finished so I backed it up to itunes on my Mac then did a local restore so I have everything, then I backed up the 6 to icloud but now I can't delte the backup from the old iPhone because it says it's in use and I wou like to recover this available space.

An interrupted iCloud restore will wait for approximately three days for the restore to resume, then it will time out. If you wait 3-4 days you should be able to delete the backup.

My new laptop says another computer is using my ip address. How do I stop this? I was trying to get all of my stuff off my parents desktop IMAC and think I screwed something up with the wifi because now my laptop won't connect to wifi

I bought my own laptop (Macbook Pro) and set it up and am using wifi that my parents use on their computer. Everything was working great until I wanted to put my itunes from the desktop to my laptop. I used my Mom's sign on of her apple id and since then when I log on to my laptop it says another computer is using my ip address...what do I do? Thanks!

Hey there Toni D.,
I suggest the troubleshooting outlined in this article here:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628?viewlocale=en_US
Does the symptom occur with more than one Wi-Fi device?
Wi-Fi issues may be related to the network in question or they may be related to the Wi-Fi computer joining that network. Usually, if other computers or devices (such as the Apple TV or iPhone) are able to get on the Internet without issues, then your Wi-Fi router is probably fine.
If you only have one Wi-Fi device, proceed with this article.
Make sure your software is up-to-date.
Install all software updates available for your Mac.
If you use a third-party Wi-Fi router, check with the manufacturer to confirm that it has the latest firmware installed. If an update is available, follow the manufacturer's instructions for updating the firmware.
To determine if your Apple Wi-Fi base station firmware is up-to-date, see Updating your software.
Check your connections.
Some networking issues may be caused by loose or disconnected cables. Verify that all Ethernet and power cables connected between your modem and your Wi-Fi router are correct. Checking that devices such as your router and modem are on, disconnecting and carefully reconnecting Ethernet cables, and/or replacing damaged Ethernet cables may resolve the issue without any further troubleshooting.
Verify that you are using the recommended settings for your device.See Recommended settings for Wi-Fi routers and access points.
Restart your network devices.Powering your modem or router off for a few seconds and then on again may resolve network issues without any additional troubleshooting. If you have phone service through your ISP, power cycling your modem may interrupt that service. You may need to contact your ISP in order to restore your phone service if your modem is reset or powered off. Ensure that you have alternative means to contact your ISP (such as a cell phone) to avoid unnecessary delays in restoring your Internet or phone service
And if this does not get the network connection going again I would use the troubleshooting from down the bottom in the section labeled Symptom: My Mac does not connect to the Internet.
Take care,
Sterling

Disk Utility says everything's fine, but Install disk doesn't find my internal drive as a possible destination. When I startup with Command S, I get a looping "cannot mount errno = 19" message.

Disk Utility says everything's fine, but Install disk doesn't find my internal drive as a possible destination. When I startup with Command + S, I get a looping "cannot mount errno = 19" message.
Problem started when I used Tech Tool Pro 6 to "de-fragment volume". Had to cancel that process before it finished because I ran out of time. Thereafter, when I startup my machine normally, I get the gray Apple logo at first, but it changes to a prohibited symbol (circle with a slash thru it) and hangs.
When I startup holding the Option key, I can see my internal drive, but I get the same results as above.
When I startup using the MacBook OSX Install DVD, it does not find my internal drive as possible destination.
When I startup using the MacBook OSX Install DVD and then run Disk Utility, it finds my drive, allows me to "repair" and says everything is fine.
When I startup with Command + S, I get a looping error message "errno = 19" and cannot stop it to do anything else.
When I startup from Disk Warrior v4.4, it does not find my internal drive to do any repairs.
When I startup from Tech Tool Pro 6 and run the "computer check" diagnostics, everything passes but the Volume Structure, which fails at "Volume Extents (B-tree)." When I use TTP's "Tools" option to run "volume repair" it will show my internal drive and allow me to click the GO button, but nothing happens and nothing changes.
I have a Time Machine backup on an external USB drive, but for as long as the internal drive doesn't mount, I can't use the backup to restore.

It's a false report and should be ignored.
I would not rely on TT as I've already said earlier even before Grant posted similar advice.
I really think the Rigid Disk Block may be corrupted. This holds the partition map and could prevent a volume from being unmounted. Unfortunately, there is no way to fix that without repartitioning the drive which will remove everything. So, before going down this road I hope you have backups or can make a backup.
Drive Partition and Format
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Proceed with reinstalling OS X.
5. Download and install Mac OS X 10.6.8 Update Combo v1.1.

HT1529 Upon startup my iMac has a popup that says: "talagent wants to use the local items keychain." New to me--can't get anywhere. How do I get out of this and get things up and running again?

Upon startup my iMac (OSX Mavericks) has a popup (that I can't get rid of!) that says: "talagent wants to use the local items keychain." I never set this up, don't want it, and want my iMac to start up with my desktop in place and ready to work. I'd appreciate some help please. How do I get rid of this? Thanks.
Larry

I found this and it fixed my issue..
I was suffering with this same problem, I followed these steps and everything returned to normality:
1.- I opened KeyChain app and run the FirstAid (from the KeyChain app Menu)with my user Password (this do work) because the problem is not with your password. If there is any trouble with your keychain file this will fix it.
2.- Opened Disk Aid and run Fix Persmissions just in case there was left some wrong file permissions during the upgrade.
3.- Went back to the Key Chain App and Locked and Unlocked the Keychain using the Lock in the top left corner of the app. When asked for my password I simply typed my User password.
After this everything worked fine. These are the steps that I followed but I really think that #3 did the trick here. You could try to do only #3 directly and it might fix your problem, but fixing the Keychain and fixing OS permissions is never a bad Idea.
Good Luck friends.

I need MS office for Chinese online banking.The Apple website says the Air can use the latest MS Office if it has a 32bit processor, but the tech specs dont say which Airs have a 32bit processor. Where can I find out?

I need MS office for Chinese online banking.The Apple website says the Air can use the latest MS Office if it has a 32bit processor, but the tech specs dont say which Airs have a 32bit processor. Where can I find out?

john howkins wrote:
Thanks, but the website says I need a 32 bit processor so presumably a 64 bit processor is no good? Or can a 64 bit automatically do everything a 32 bit one can do?
Where is the link that says you need a 32 bit processor? On my MBA, in the past I've ran both Office for Mac and Windows 7 (MS Office) via Parallels (Bootcamp does the same thing). I chose installing Windows 7 in the 32 bit mode ONLY because I have a couple of other legacy Windows programs that only run in 32 bit mode.

Lion Install does not work, says "This disk is used for Time Machine backups"

I'm having trouble installing Lion onto my macbook pro intel core 2 duo.
I am backing up my computer with an external drive using TimeMachine, but i've disconnected it. Also i'm running SL 10.6.8
I have a windows 7 partition that was created with boot camp.
I've tried to make sure everything is all ready for lion but when I go to install lion it says "This disk is used for Time Machine backups" and the hard drive is grayed out.
Same problem as this guy: https://discussions.apple.com/thread/3190321?start=0&tstart=0
I'm hearing that a file called "Backups.backupdb" is on the top level of the hard drive, but I see no such file. I've looked at the invisible files and I cant find it.
I've also created a bootable flash copy of the lion install but that does not work It gives me the same message "This disk is used for time Machine backups".

"Backups.backupdb" if the file in Time Machine. As the discussion says, you have to find that file and trash it. Try spotlight to locate it. If that does not work, down load OmniDiskSweeper from the Internet (free) and go through an organized search to find "Backups.backupdb". If that takes too long or is too tedious, then if you have everything backed up, erase the HDD and start from square one.
Ciao.

Unable to empty trash despite doing terminal bash -says resources is in use

I installed IBM's SPSS 20 on my Mac. It wouldn't work so I uninstalled it as directed by moving it to trash. However now I can't empty trash as it says "Resources" is in use. I've tried everything suggested in various discussion including doing a termial bash but it still won't empty! Help please!

Reboot and try again.

Sync from iTunes says everything OK but no content appears in the iPod :-((

I think everything's up to date on my Mac:
- iTunes 8.1 (50)
- iPod nano 8 Go 4th gen with software 1.1.3
And now my problem.
When I connect the iPod to the Mac, iTunes recognizes it no pb. I can sync content (manualy or auto): from inside iTunes, all is ok. Music appears as music, videos as videos, etc.
After ejecting the iPod, I've got no music no video… nothing but the "other" category pretending to store anything I've synced.
If I connect the iPod back to the Mac, the sync process starts again. iTunes says everything's ok. After having ejected the iPod, I see no more music nor video. But the "other" category has doubled in size!!!
I've tried to restore initial settings many times with iTunes and got the same result each time.
I've even formatted the iPod with Disk Utility then reinstalled the 1.1.3 soft through iTunes. And the whole thing runs the same way.
Any suggestion or workaround?

If the content is in your media folder, which it should be, you have will lost any ratings, playcounts or playlist changes you've made since the backup database was created, but not the media itself. All your newly added media can imported to the library with File, Add Folder to Library, <Media Folder>.
If for some reason content has really been lost from the computer it may be possible to recover it using the tips in Recover your iTunes library from your iPod or iOS device as given in the original linked post.
tt2

So With All my apps i am using less than 300mb no music no videos, but my iPad is saying that I have used 13.1gb how can I get that lost space?

So With All my apps i am using less than 300mb no music no videos but my iPad is saying that I have used 13.1gb how can I get that lost space?

Did you confirm this in Settings>General>Usage>Storage? You can see how much storage space each app is taking up. If that checks out with your findings, then your space is probably being taken up by "other". You can see this when you connect your iPad to your computer and with iTunes running. You can see it in the capacity bar at the bottom of the iTunes window on the right side.
"Other" contains most of the stuff associated with apps but not the apps or any media itself. Safari history and bookmarks, contacts, notes, text messages, email messages and so on. When "other" takes up that much space, something is wrong and usually restoring the iPad will clear that up.
Backup the iPad, transfer purchases, restore to factory settings, restore from the backup and then sync with iTunes to retrieve everything.
iTunes: Restoring iOS software - Support - Apple

My siri says everything i do

I am unable to scroll, and i have to double everything in order to use it, and siri says everything I do. How do I stop this? I turned on my phone and it just happened.

I found the exact action to turn off VoiceOver:
Go to Setting (doulbe click on the icon)
Scroll down to General (Using three fingers)
Open General (doulbe click on the item)
Scroll down to Accessibility (Using three fingers)
Once inside Accessibility, double click on the VoiceOver item
Once inside VoiceOver double click on the swith (On/Off) to turn OFF.
Then, go back to having fun with your iPhone 4S.

I can't activate my iPad and I'm sure i am using the correct apple id and password but when i press net it says it cannot be used to unlock this iPad

i can't activate my iPad and I'm sure i am using the correct apple id and password but when i press net it says it cannot be used to unlock this

You can try to figure out which Apple ID/email address and/or password you used to activate it by going to http://iforgot.apple.com
If you can't, you'll need to contact Apple Account Security with your proof of purchase.

Can't delete a file on iDisk. It says it's in use.

I cannot delete file on idisk, although I try to remove them it says items is in use, which is not...
someone knows how to fix this?

jakotyo wrote:
I cannot delete file on idisk, although I try to remove them it says items is in use, which is not...
someone knows how to fix this?
When I've had this trouble I've always been able to delete such files using the MobileMe Web interface.

TS3992 I bought iPhone 5 but cannot delete iPhone 4S back up because it says it is in use

Help, I bought an iPhone 5 yesterday but cannot back it up to the cloud, because it says there is no room. I tried deleting the last back up from iPhone 4S but it will not delete because it says it is in use.

I don't know about the "can't delete" issue, but as to the storage problem...
The problem could be that you don't have enough storage on the device itself, not on iCloud. Go to Settings>General>Usage to see how much "Storage" you have available on the device. Farther down the list is the available storage on iCloud.
Also check:
Go to Settings>iCloud>Storage & Backups>Manage Storage; there, tap the device you need info on and the resulting screen lists Backup Options with which apps store data on iCloud as well. Tap Show All Apps to get the complete list of apps and MB used for backup storage.
A device needs many MB of storage in order to perform a backup to iCloud.
Also see: http://support.apple.com/kb/ht4847`

N95 kepps saying everything is in use!

Similar Messages

Maybe you are looking for