N95 keys working automatically - HELP.....

Hi guys,
have a very funny problem with the n95 - 1. I have upgrded to v20 2 months back and was happy with it. but from yesterday am facing a funny problem where the media key and *9 seem to be getting pressed automatically without me doing anything...specially if the phone keypad is unlocked....i tried a soft reset and also scanned for viruses, but have not found any change in the behaviour....will be grateful for any help....my next option is to hard reset the phone. HELP::::

Mav2000
Read my last post. It could be a hardware problem. I suggest that you take the phone to Nokia care.
If my post has helped you please click the white star on the right

Similar Messages

Spacebar, left arrow key working intermittently Help!!!

Am using a macbook pro 17 inch mid 2010 and running yosemite beta 10.10 my spacebar, left arrow key, caps lock, is working intermittently.
I have removed the keys and cleaned but it works for a while and stops. I havent spilled any drink or water on it. I checked show keyboard viewer and i attached the screenshot please help its really urgent.

Hi Ralph
Please confirm if replacing the keyboard will solve the problem, since my geographical location makes it difficult to access an apple shop.
Thanks

BlackBerry 9220 all the keys are not working & camera working Automatically

Guys Please Help,
My BlackBerry 9220 all the keys are not working (except end button)& camera working Automatically, i tried to update from desktop manager but the update reaches to 100 % & stucks. I tried 5 time but still it is not updataing. I m fedup from this phone, please help
Regards,
Taj

Hi Taj151286
Welcome to BlackBerry Support Forums
Please run a Self Test on your Device to see if its an hardware issue , follow this Knowledge base :
KB16037 : Using the Self Test application on the BlackBerry smartphone.
If your device fails then you might have to look for warranty or repair options.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Hello. I recently updated numbers on my macbook pro. I like the auto completion feature (proposing te word as I type). With this new update, I cannot see this feature and it doesn't work automatically. Can I have any help on this issue ?

Hello. I recently updated numbers on my macbook pro. I like the auto completion feature (proposing te word as I type). With this new update, I cannot see this feature and it doesn't work automatically. Can I have any help on this issue ?

This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
Here's the link for the safeboot
http://support.apple.com/kb/HT1564?viewlocale=nl_nl

My G5 won't boot up. The Gray screen comes on and it thinks about it until the fan revs up like it is about to explode. A friend said to start it up with the OS disk and then go to utilities. Didin't work. Any suggestions? Isn't there a key stroke to help

Oh, so this is where I ask my question. Sorry, first time here. As I was saying in my long intro, the gray screen come up and the thing is spinning at the bottom, but nothing happens. Then the fan starts reving up like it is about to explode and I have to manually shut it off. A friend told me to start it up with the OS disk and then go to utilities. I couldn't find the thing, so I went out and bought another. Needless to say, it didn't work. Is there a key stroke to help jump start the machine? How can I get into this thing? I would prefer not to take it in because there are a lot of things on there I don't want just anyone to have access to.Thanks, in advance, for your help!

The last time you had to hold down cmd opt pr more than twice was a decade ago....
G5? PowerPC? 10.5? or earlier....
https://discussions.apple.com/community/desktop_computers/power_mac?view=discuss ions
Apple has a number of resources like "Power or Startup Quick Assist"
http://support.apple.com/kb/HT1149
Your drive does need to be repaired, and best things to buy are another backup recovery drive, with a small OS X partition; a copy of Disk Warrior is expensive @ $90 but excellent and best.
Never bother with or use the drive or reinstall while there are errors. Don't take a "clean' bill from Apple Disk Utility to mean there are no errors. Only that it didn't find what it looked for.
http://www.macintouch.com/readerreports/harddrives/topic4557.html#d12aug2010
http://www.alsoft.com/DiskWarrior/index.html
A quick search "keyboard shortcuts" takes you here:
http://support.apple.com/kb/HT1343
how to resolve and fix startup issues with fsck and disk utility:
http://support.apple.com/kb/TS1417
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
How to use DU to backup and restore
http://support.apple.com/kb/HT1553
http://www.alsoft.com/DiskWarrior/index.html
http://www.bombich.com/ccc_features.html
Make sure to have multiple backup sets and of your system so if there is a serious problem, you can just erase and restore to be back runninig.
Sounds like your G5 though needs PMU reset, not PRAM, and the best way for those is to clear nvram instead. might even want to check for dust; tell what System Profile says (later) as to "PowerMacX,Y" or "MacProX,1"
http://www.apple.com/support/powermac or /macpro
http://www.apple.com/support/sitemap/
The Utility menu is on the menu bar of an "OS X Install DVD" and at the point where you get to but stop at "install....' for OS X. you probably do need to install OS X on another drive to work from.
Oh, a real severe issue and damage to the drive directory or filesystem CAN in cases prevent booting from DVD (the system still tries to find and see what boot volumes are present) and can help to pull or disconnect the drive. Putting a drive in a FW case to turn on after startup is very useful.

Enter and shift keys not working. HELP!!!

A few days ago my mouse started behaving erratically all of a sudden. It would move by itself, click apps, and switch tabs rapidly all on its own. I've had this computer for over 2 years and this has never happened before. Restarting and rebooting into safe mode didn't work, but one user suggested a PRAM reset and that fixed the mouse problem. However, my enter and shift key on the right side do not work now (this is much less annoying than the mouse problem, but still very inconvenient!). Restarting the computer and doing another PRAM reset doesn't work unfortunately. I also used the keyboard viewer to confirm that all but those two keys work. I don't think the issue is with keyboard lint because both keys worked fine before I tried the reset. Booting up in safe mode also doesn't fix the problem. It would be great if I could find a way to fix this here since I won't be able to go to an Apple genius bar until December!

Hello sandi3s,
The troubleshooting detailed below may help restore functionality to your MacBook Pro's keyboard.
Some keys don't work as expected
From the Apple menu, choose System Preferences.
From the View menu, choose Speech.
Click the Text to Speech tab.
If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
Click the Accessibilty or Universal Access pane in System Preferences, then click the Keyboard tab.
Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
In the Accessibilty or Universal Access pane, click the Mouse tab, and make sure Mouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, see Unable to type while Mouse Keys is enabled in Mac OS X.
If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
If the issue persists, use Keyboard Viewer to help isolate the issue:Start from the Mac OS X Install Disc, choose Terminal from the Utilities menu and test the keys which were previously not working. If the keys work while started from the Install disc, then the keyboard itself is working correctly. Use How to troubleshoot a software issue to isolate the software issue that may be causing the keys to not respond.
Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
From the Input (flag) menu, choose Show Keyboard Viewer.
If the keyboard is connected and detected by OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
One or more keys on the keyboard do not respond
http://support.apple.com/kb/TS1381
Cheers,
Allen

The "enter" key on the numeric keypad of my external mac keyboard has stopped working. Help!

The "enter" key on the numeric keypad of my external mac keyboard has stopped working with my Macbook pro. If I plug the keyboard into any other computer, that entier key works fine. I'm using a standard Mac wired keyboard, & it's worked fine for 2 years now. Help!
This is the keyboard I am using: http://store.apple.com/us/product/MB110LL/B/apple-keyboard-with-numeric-keypad
Not sure what I might have accidentily done to disable the enter key. (The normal enter key works fine, just the one on the numeric keypad.)
Thank you for your help.

Hi there,
Do you have any resolution to this problem in the end? Because it happened to me an exact same thing.
Please share if you have found a solution to your problem. I also cannot think of what I did wrong to disable the Enter key.
Best Regards,
Jeffri

N95 keys not working.

For some reason my n95 keys have just stopped functioning. Not all but some. the C,up and toggle left will not work,1 and 8 wont work either. Phone hasnt been dropped or gotten wet or anything stupid like that. I am on the Isle of man at the moment and has really annoyed me. Was working fine and all of a sudden they would not work...anyone got any ideas?
Message Edited by gc33 on 28-May-2008 04:04 PM

Finally got my N95 working on two occasions now even when soaked in Salt water which badly corroded every contact on the circuit board!!
If you feel confident, (you've got nothing to loose) Remove the battery and carefully strip your phone down to the bare board. Each connector simply plugs in to its female socket, take care on handling the data screen put it away somewhere safe!
Use a sewing needle or similar sharp instrument and carefully scratch between each and every solder joint on the phones circuit board and connectors.
Do not scratch any ribbon cable terminations unless really necessary!
Take your time, work carefully and use a magnifying glass if needed, afterwards flush the cleaned joints with a solvent based electrical cleaner and allow the joints to evaporate dry.
Clean any noticeable dirt away from all areas of your phone and carefully reassemble your N95.
Replace your battery and hopefully your phone should reboot without loss of any data!
You can also try a system reset if this fails, you will loose some data, but I haven't found this necessary. (system reset info already posted)
Good luck
Boovy
PS my son's N95 has also been through a full wash cycle in the washing machine and all we needed to replace was the earpiece speaker! We did need to dry it out over 2 days against the tank and placed in a sock of dry rice!!

HELP: 5800 Froze - Screen is on but no keys work i...

Hello - I bought 5800 XM about 3 weeks back and really loved it. Yesterday it started behaving strangely as I was not able to change the themes or contacts bar to shortcuts. Then after about an hour or so it went blank. I charged it, but now
- screen is just on always
- no network signal
- none of the keys work...i get a message saying 'Use Keygaurd Lock to unlock' but when i push the unlock key i get the same message
-PC Suite does not recognize the connected phone so can't do firmware update also
I have researched on this forum but even the 3 finger hard reset is not working...please help or should i just go to the Nokia care?

If the three finger reset didn't fix the problem and you can't update the firmware either, better take it to the Nokia Care Center. Sorry to hear you had problems with the phone. In my experience the 5800 is a great phone, I haven't had a single problem with it, although the GPS takes a long time to get a lock. Hope you give it another chance. Good luck!

Return AND Enter keys won't work. Help

Neither key works. Restoring keyboard default didn't work. Very frustrating. Is there a way I can change functionality of keys to get 'Return' and/or 'Enter' back in my mix? Obviously necessary, as I write many letters and often text with clients (if it doesn't have a 'Send' button, I'm screwed). Terribly frustrating. Any info appreciated, as I cannot afford a new keyboard at present. Thanks in advance.

Try Control + m key for now, then we can work from there.
Any cheap USB KB will work, $1 here...
http://www.google.com/products/catalog?client=safari&q=cheap+USB+KB&oe=UTF-8&cid =15886989480154280526#p
If your near Seattle I have several spares, of which you could have one.

Since my last software update, my iphoto 11 will not import any photos from any source. The circle just spins...when I go to force quit, it says iphoto not responding. Backed up iphoto library, uninstalled and reinstalled iphoto. Still not working. Help!

Since my last software update, my iphoto 11 will not import any photos from any source. The circle just spins...when I go to force quit, it says iphoto not responding. Backed up iphoto library, uninstalled and reinstalled iphoto. Still not working. Help!

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

My ipod touch is disabled for 212,456,786 minutes! I have tried to restore and followd all instructions on the apple support site but this has not worked. Help!

My ipod touch has been disabled for 212,456,875 minutes! I have followed all instructions on the apple support site to restore it but this has not worked. Help!

Without know exactly what you did or what happened:
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Unable to use the keyboard in XP keys work OK when boot into dos

Unable to use the keyboard in XP. It was working for over a year OK with XP running
keys work OK when I install win98 or use a dos boot disk.
If I try to reinstall XP I can not use any of keys to input anything.
Return
Esc
CapsLock
ctrl-alt-del.
NO KEYS WORK AT ALL OTHER THAN
ë à
I did an upgrade from win98 but that did not work.
Any ideas

billwyatt, welcome to the forum,
I think you forgot to mention which ThinkPad you have. It would be even better if you could post the Type and Model Number as this will help members to hopefully help you. If it ends in CTO please provide some details about the ThinkPad. Please do NOT post your s/n.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

My keynote has frozen and wont open but the saved version wont open either. if i restart my laptop i am afraid that it will erase my work. please help me

my keynote has frozen and wont open but the saved version wont open either. if i restart my laptop i am afraid that it will erase my work. please help me

Try this repair for Keynote 6.2, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
4
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
5
when complete, restart the Mac normally, Apple menu > Restart
6
install Keynote from the Mac App Store
let us know if this helped

Installed Windows 8 on a late 2011 MacBook Air and was working fine now keyboard not working so cannot enter password? Caplocks key works but I am locked out on my own PC and cannot seem to get it to recognize built in keyboard,bluetooth,generic USB one.

Installed Windows 8 on a late 2011 MacBook Air and was working fine now keyboard not working so cannot enter password? Caplocks key works but I am locked out on my own PC and cannot seem to get it to recognize built in keyboard,bluetooth,generic USB one.

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

N95 keys working automatically - HELP.....

Similar Messages

Maybe you are looking for