N95 LIDE OPEN LENS COVER BUT CAMERA DOESNT FIRE UP...

Hi people,
i have had my N95 for a while now but i went to use the camera and i slide the lens cover open and nothing happens. ive even gone to the barcode reader and i get "Barcode reader on standbye. Open lens cover.
can any one help cheers. Message Edited by sam_colbear on 24-Oct-200709:38 AM

Hey,
Make sure your camera's protected lens window is clean.
Normaly when you open the back camera's protected window the main camera will be activeted and it should work fine in this way unless your camera focus is missing

Similar Messages

N95 problems with lens cover

I'm reading about issues with the lens cover of the N95.
It appears that when you open it, sometimes it doesn't work properly.
opening the shutter caused the app to load, but no video from the camera showing up, and the settings icons are leaving a trail on the screen when they slid open.
It is happening to me as well.....
Is this a know issue, and if yes, how can it be resolved?
I understand that even if i change the phone, it won't help, as it is a flaw in the design ?
Any help would be nice

Will it never connect or the the connection closes afther a while?
In the first case it can be two things.
1. The headset has reached the maximum amound of connections. Max os often 7.
2. The BT profiels are diffrent. Nothing you can do.
If the connection closes it's your Nokia phone. The nokia profile difrens from the one of the motorola. The refresh time is difrent.
Hope I helpt.
Drunken

PowerShot S50 lens cover not operating OK .. lens not extending. Not supported. Repair suggestions?

Hi I have a PowerShot S50 (10 yrs old and still great). The lens door is not sliding back easily - make take a lot of juggling - and therefore the lens does not extend for picture taking. When I get the door open/lens extended, the camera is operational. It is difficult to close the lens door again to protect lens.
I see the PowerShot S50 is no longer officially supported by Canon for repairs. Any suggestions where I can send this for servicing. The camera has served me well until now. I'd hate to have to get another camera for what appears to be a small mechanical problem.
Thanks for any suggestions.
Anne

Ah well... Froze again today after seeming ok for a week. Have ordered a new SIM card in case thats linked. The only thing that had changed when I rmeoved and re-inserted the battery (to turn on phone) was that the general profile had been reset, i.e. standard keypad tones on and Nokia tune instead of my own mp3. everything else still intact. at least I didn't lose all my messages and bookmarks like the old days.
I really cannot wait for the next phone to come out so I can just buy a new one and be done with it.
N82 has been the best nokia I have ever owned despite all the hassle.
@ Kavi6233 - Have tried the restore factory settings etc MANY times... It makes no difference. This has been happening 6 months on and off and I have tried EVERYTHING possible. different battery, no applicaitons installed, no mem card inserted, factory retart, latest firmware etc etc still happens randomly. Also had it repaired in nokia care centre.they said it was repaired and tested fine. and it was, for a week
5110, 3210, 3220, 8210, 8850, 7210, 6230i, N73, N95 8gb, E51, N82

N97 camera does not work when i open the len cover

I think the camera softeware has bug. Tthe camera software shows up when all the menu, and when i click i can see the zoom in/out slider but nothing there is no image showing up on the screen. The screen is dark and it looks like the camera sensor does not receive any image from outside. This can be fixed by restarting the phone but it's very annoying. I had to reset like 10 times a day. If i leave the software on it's fine but if i turn off the software (close the lens cover) and turn back on the bug occurs. Anyone has the same issue like me? Do i need to update the firmware? Im on the original firmware.

it does not happen all the time to me, but sometimes if I open and close it to often, it would happen.
but I don't need to reset the phone, just close and open the len cover again, and it works.
Message Edited by walkmancat on 05-Jul-2009 05:52 PM

Can we get N96,N95 8GB CAMERA LENS COVER REPLACEME...

N96,N95 8GB CAMERA LENS COVER's are prone to scratches and this is a let down of these great phones. Is there any chance where we can get a lens cover replacement[paid] from nokia care in india or else where.
thanks in advance.

This is not possibble.

My itouch camera will not work. sometimes the shutter wont even open. other times it opens but the camera doesnt show anything but a black screen. how do i fix this??? please helpp

My itouch camera will not work. SOmethimes the shutter wont even open. other times it opens but the camera doesnt show anything but a black screen. how do i fix this???

Basics from the manual are restart, reset, restore.

After upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to co

after upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to correct it? thank you

Hello pichastos,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your camera is displaying a black screen, please follow the information outlined below.
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping (camera swap icon). If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
Take care,
Alex H.

Camera lens cover broken

hi all, i had my n900 for a while now.camera lens cover(top part) has peeled off from its glue and the wire makes the cover open and close came loose by itself. i have the warranty but i do not want to send my phone just for the cover for 2 weeks. is there any place on web that i can order the lens cover only and replace it my self. its very east to remove since its plastic base.i only have the blue base on the phone now and it is loose so its keep opening the camera mode. very annoying. please help.
thanks

Take it to a store (Nokia or network) and ask if you can just have the back panel replaced. Or, try to find one online. Markets usually sell the covers too

Canon Vixia HFM301 camcorder lens cover not opening?

I dropped it and now lens cover does not open but camera records video and stills okay when I hold shutters open. How can I remove lens cover or keep shutters open?

Aight...so here is the deal. Today morning, I tried recording from my same camcorder but with a different SD card and then upload to imovie and voila it worked like a charm. So maybe my card got corrupt somewhere down the line? But its weird that day before it worked and now i can only see contents from the Finder but not imovie.
Anyways, I plan on copying contents off my old card, reformatting it within my camera and then try using it again to see if anything changes.
Again, thanks for the help.

N97 camera (lens cover and application issues)

i think these issues are already posted, but no solution as yet.
like everyone i was having scratches near the lens, so i removed the lens cover.
now my camera application doesnt work. i am on v12.
the camera application freezes, ive resintalled the firmware, reseted factory settings, everything !
no luck with starting the camera application.
ps, i even tried attaching the lens cover back, that didnt help either.
any solutions nokia ????

first of this is a user to user forum. second you voided your warranty by disassembly of your phone. anything to do with disassembly can't really be talked about here as it is against the policy of this forum. camera operation in the case of the n97 is dependent on the lens cover as it communicates to the application what needs to happen. removing it breaks that path of communication. i am sorry but i have no other ideas for you, taking it to nokia care might be your solution but you also might need to pay for repairs due to what you have done on your own to your phone.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

My camera on snapchat works but only the front.. and my actual camera doesnt?

my camera on snapchat works but only the front.. and my actual camera doesnt?

Have you tried closing the Camera app via the multitasking bar and seeing if it works properley when you re-open it ? Double-click the home button to open the taskbar, and then swipe or drag the Camera app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
If that doesn't fix it then you could try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Can some body give me an advice, my cursor can not be controlled after I shut it down, and open again. But this problem goes away after I closed and opened the lid

Can some body give me an advice, my cursor can not be controlled (using pad) after I shut it down, and open again. But this problem goes away after I close and open the lid.

Boot from your OS installer disk and run Repair Disk from Disk Utility.

I am used to that when I open an image in Bridge it will be opened in PS, with all preferenses I have done to the image. Now it opens in PS but without any changes i have don e in Bridge. Also when I open a new image I want it to be opened in Camera Raw a

I am used to that when I open an image in Bridge it will be opened in PS, with all preferenses I have done to the image. Now it opens in PS but without any changes i have don e in Bridge. Also when I open a new image I want it to be opened in Camera Raw automatically, both if a Jpeg or Raw picture.
Using PS CC
Regards BOJ

<moved from Adobe Creative Cloud to Bridge General Discussion>

PSCS6 no longer recognizes my CR2 files and will not open. Using Canon 5DMark III with updated Camera Raw . It has worked before but now won't open files from this camera.

I have been able to open files from this camera before but still checked for latest Camera Raw download. Still won't open files from this camera. Opens files from my 60D just fine. I downloaded the latest and it has worked before. What the heck is going on?

Glad to be of help. But I'm curious (not critical of what you are doing) to know why so many people like to use Nikon Transfer to transfer their files to the computer. It is still necessary to import them into Lightroom. And, from my perspective, it seems simpler and maybe even a little quicker to use the Lightroom import dialog. I have Nikon cameras, and have never even installed the Nikon Transfer utility. What is so unique about it?

Tried to open a pdf document with Acrobat XI Pro Trial and sign in popped up , I keyed in my username and password but it doesnt respond its like grey with the four dots rotating forever. Any solution Please ?????

Tried to open a pdf document with Acrobat XI Pro Trial and sign in popped up , I keyed in my username and password but it doesnt respond its like grey with the four dots rotating forever. Any solution Please ?????

Hi higi97,
How are you connected to the internet? Are you behind a particularly secure corporate firewall? Are you on Mac or Windows? Do you have any anti-malware software running on your machine that may be preventing applications other than your browser from connecting to the internet?
You may try to follow the steps below:
1.Close the Creative Cloud application.
2.Navigate to the OOBE folder.
Windows: [System drive]:\Users\[user name]\AppData\Local\Adobe\OOBE
Mac OS: /Users/[user name]/Library/Application Support/Adobe/OOBE folder
3.Delete the opm.db file.
4.Launch Creative Cloud.
Let us know if that helps,
Regards,
Rave

N95 LIDE OPEN LENS COVER BUT CAMERA DOESNT FIRE UP...

Similar Messages

Maybe you are looking for