N95 Locks Up in Maps Mode

Hi All,
My N95 completely locks up as soon as I enter Maps.
They only way I can fix it is taking out the battery and turning it back on.
This issue only happens when I enter Maps.
I have completely deleted the OVI Maps software from my memory card and re-downloaded a fresh copy, however, I am still getting the locks ups.
Any assistance in fixing this issue would be greatly appreciated.... Cheers   

Do the following steps:
A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
          1] Open the software and go to the option which says "Router Settings"
          2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
        3] Lower the MTU (Maximum Transmission Unit) from 1500 to 1400 or less (usually found on your router's main/ basic setup page)..
B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the username field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.
Then check the connectivity status..

Similar Messages

  • N95 8Gb USB Data Transfer Mode not working

    I have a bizarre problem with USB Data transfer.
    a) I upgraded to the new 15.x firmware with the correct HKCSL package - 0557980
    b) I connected PC #1 in data transfer mode with no issue and copied a bunch of installers onto the mass memory and went on to install them - to the PHONE memory.
    c) Later in the day, connected PC #2 and did the same with the last few applications.
    d) Next day tried to connect PC #1 and it didn't work
    e) Thought I must have an application using the MASS storage but checked and not so - all apps on Phone memory.
    f) Went to PC #2 and tried - Data transfer mode works - no problem.
    g) Tried PC #1 again, and still not working. I get all the right messages (Mass storage cannot be used at this time etc) on the handset, and I get the "safely remove hardware" option appearing on the PC - but I don't get a drive letter assigned in the Windows Explorer.
    h) I have tried it on PC #3 and this works as well - no problem.
    1. The working PC's both have PC Suite 2-Beta installed, while the problem PC has no PC suite at all.
    2. I have downloaded the Nokia-connectivity_cable_driver_rel_6_85_10_0 and it installs properly - giving all the expected wireless... options in Device Manager, but I still don't get a drive letter assigned with the basic data transfer mode on this problem PC #1
    So the issue seems to be with a PC that has never seen any version of PC suite, but it worked straight after the firmware upgrade.
    All PC's are XP SP2.
    Any suggestions on anything else to try ?
    Regards

    SOLVED by:
    - attaching N95, selecting USB Data Transfer Mode
    - Going to Device Manager
    - Selecting the USB Mass Storage Device for N95
    - "Uninstall"
    - Remove cable when N95 says its safe to
    - Re-attach cable
    The PC then re-discovered and reloaded the drivers including the mass storage which then worked normally.
    No idea what messed it up in the first place though.

  • How can I lock, put in lost mode or wipe memory on my stolen iPad if it is the only apple product I own?

    How can I lock, put in lost mode or wipe memory on my stolen iPad if it is the only apple product I own?

    I have already tried this and it doesn't work. It only says no devices. Suppose this means that whoever stole it have already wiped the memory so they can use or sell it. Although I would think the serial number should be connected to the hardware permanently somehow. Don't know how you do that on an iPad that requires a pass code to login to.

  • My iPod is locked in the portrait mode, I have the portrait orientation unlocked, I restore it twice but no help.

    My iPod is locked in the portrait mode, I have the portrait orientation unlocked, I restore it twice but no help.

    I'm surprised that the restore does not fix it, which leads me to think that one of two things is going on:
    One, your acceleromter has malfunctioned. The only fix for this that I know of is to take it to a Genius Bar at an Apple Store.
    Two, you might not be holding the iPod Touch properly to make orientation work. You have to hold it vertically when you turn it if you want the orientation to change. The iPod should not be parallel to the ground, but perpendicular.
    Three, you may misunderstand how to manage the orientation function. When you bring up the running apps tray at the bottom, do you see the lock in the middle of the circular arrow? If you do, the orientation is still locked. tap it to make the lock disappear, and then open an app and see if it changes orientation
    See the two images below for locked and unlocked statuses.
    UNLOCKED:
    LOCKED:

  • Itunes cannot connect to iphone because iphone is locked and in lost mode

    what should i do as the message on computer read as ''itunes cannot connect to iphone because iphone is locked and in lost mode''

    vineetvasudeva wrote:
    what should i do as the message on computer read as ''itunes cannot connect to iphone because iphone is locked and in lost mode''
    Then take it out of Lost Mode the same way you put it into Lost Mode:  via the Find My iPhone App or www.icloud.com.

  • HT1212 my iphone is locked in iphone recovery mode after I restored it and now I get an unknown error (3004)

    my iphone is locked in iphone recovery mode after I restored it and now I get an unknown error (3004)

    http://support.apple.com/kb/TS3694#communication

  • XY graph and map mode

    Hello,
      I am using a XY graph and using the map mode for the Y axis to change the Yaxis to a logarithmic mode. The min and max values of the y axis are set to -50 and -7. The y axis of the XY graph is display as 0.01 (min) 10 max. Why doesn't the XY graph accpet the main and max limits that I sent to it?
    Regards,
    Kaspar

    It can be done, bu it may not be trivial, depending on how automated you want it to be.
    First, create a duplicate scale.  See the LV Help page titled Adding Multiple X- and Y-Scales on Graphs or Charts.
    Next, calculate the values in dBm from the range in the data or the range of the instrument.
    Use property nodes to set the properties of one scale to display the dBm values and hide the other scale.
    Here is a little example which shows what I tried.  Some of the things in there may not be needed.  This is not optimized.
    Lynn
    Attachments:
    dB Scale.vi ‏30 KB

  • My IPAD 2 is locked in the portrait mode I am unable to unlock it what do I do?

    My IPad is locked in the portrait mode.  All of the Icons are upside down (at the home buttton). OS is 5.0.1.  I can see a half circle with a lock in it.I have tried to double click this loc and nothing happens.  Under the Lock Rotation the side switch is set to mute.  Multitasking gesutres is on.  Anyone have any suggustions?
    [email protected]

    As there is a lock symbol at the top of the screen then you have rotation lock on, and as the side switch is controlling notification mute, then you should be able to lock/unlock the rotation via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • Is it normal wifi disconnect when iPhone 5 iOS 6.0.1 is locked or in Sleep mode?

    is it normal wifi disconnect when iPhone 5 iOS 6.0.1 is locked or in Sleep mode? i wondering if this normal or not, coz my iPhone 5 disconnect when my phone is locked or in sleep mode,  any suggestion or comments are highly appreciated!

    It sounds like to me that Apple has worked out a way that the data service providers can increase your usage of the cellular network to increase your bill which undoubtably has resulted in kickbacks. It is pretty crafty and I'm sure most people won't even notice. What really blows my mind is that they have people saying that it is to save battery life. I can't imagine that the ammount of suppossedly saved battery life is even messurable. Reeks of a scam to me.

  • System locked into power saving mode

    I have a A6000n tower with Vista home premium 32 bite system which was pre-loaded.  The problem is the system is locked into power saving mode, the keyboard is not functioning,I have already tried other keyboards which all do not function!
    I have tried to turn off and turn back on the system to be able to boot to a bootable startup disc but  the system is frooze.
    If anyone has had this type of problem and has had a correct approach to fix it please notify me A.S.A.P.  Thanks

    Hi,
    Update the the video driver from the NVIDIA web site.
    Your PC bios should be 5.29 or higher so that is something to check.
    The Truckee motherboard was recalled but you might be past that date.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • We are new ipad users and we're trying to download a film from itunes in Germany. It seems locked in aperpetual download mode. any suggestions?

    we are trying to download a movie on itunes in Germany and it just stays locked in perpetual dowlaoding mode. We are new ipad users. Any suggestions?

    How long have you waited to download this movie, and how fast is your internet connection?
    The movies can be a few gigabytes in size, so if could take a few hours to download if your internet connection isn't super fast.

  • T3i Locking Exposure in video mode?

    When some one moves an arm on camera I can see the exposure changing on the lcd monitor. Using older lenses I can see exposure changing/flickering as I zoom in or out.
    How do you lock exposure in video mode?  Even my several year old HV20 had a not-in-the-manual way of locking exposure.
    Any video people here? I know how you lock exposure for still photography. I'd think the answer to this would be out there and not something that even stumped my local camera store.

    http://www.dvinfo.net/forum/canon-eos-crop-sensor-hd/498717-manual-exposure-settings-video-mode.html
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • N95 v12 and Nokia Maps.

    Hi.
    I made a "mistake" just after I got my N95 and updated the Maps program. Not the entire firmware since it's not avaliable for my phone yet, just the maps program.
    Now I've understood that I used to have the tracking feature before I updated, I don't have that now.
    If I run the 12.0.013 update again, will I get the original version of Maps with tracking back?

    22-Nov-2007 08:26 AM
    lambosam wrote:
    Hi pple...
    i'm using n95 v12.0.013 ... and i've installed nokia maps ROM upgrade 1.0
    &i've downloaded Iran map into my phone using Maploader 1.0(while the newer versions lacks Iran maps!!!)
    it took me an hour to download 6.4mb of maps into my n95 ... but when i start using Maps on my device it goes blank when i zoom on iran ... i mean nothing changed after downloading maps ( i tried to do it again to be sure i didn't do any mistakes ... but after completing map download nothing changed again )
    what should i do???
    my free space on Memory card decreased from 287mb to 233mb after dl,but nothing ...
    Thank you...
    pleas send me free iran maps for nokia n95 v 10.0.018 15-3-07 ram-159(c7.01)

  • Droid X locking up in sleep mode

    Has anyone else experienced their Droid X locking up in sleep mode?  Mine did that twice yesterday to the point I had to remove the battery to reset.  It would not even turn off.

    {please keep your posts courteous} i cant even get mine to boot back up. my screen went to sleep right? then when i went to turn it back on cause i got a text it wouldnt go light. it lit up, but it lit up black instead of being in sleep mode. i can still hear my texts and whatnot being delivered but i cant see them to reply. got my phone like 4 days ago and its already trying to kill my social life... awesome.

  • N95 profile for reading Map

    I would like to create a N95 profile that does not dim the screen and does not lock the phone/keys after a certain time so that I can read the map and navigate (I have security phone/key lock on my General profile).
    I thought this was possible but any security and lock changes and display settings affect all profiles not just the profile you are in, is there a way to do this ?

    You did not say which version of Nokia Maps you are using. You can certainly set the backlight to stay on all the time from the settings within Nokia Maps. I cannot give you the key strokes without knowing which version you are using.
    Unfortunately the keypad lock is not as simple. You can either disable it completely or do as I used to when I had an N95 which was to unslide and reslide the phone to unlock the keypad. Remember the gps anttena in under the # key on the N95 so you should have the slide open to optimise signal reception.

Maybe you are looking for