N95, low screen resolution /light screen problems

Hi people!
Can someone help, ive not done anything to my phone bar take it out from my pocket and notice the screen display had changed.
The screen seems to be really light and pale all of a sudden, no change in brightness, but it just seems brighter.
the resolution seems diminshed too-when i go on the net any pictures are in less detail as if the resolutions been lowered.
ive tried turnin the phone off and removing the battery.when it starts up agtain the NOKIA symbol come on in its normal strong blue but while its booting the NOKIA turns to the lighter shade of blue and the display again just loads at a lighter version of what its normally like.
HELP!

You need to check it's not a hardware issue.
One thing you can try is to reset the phone using the instructions you can find in this post :
/discussions/board/message?board.id=smartphones&message.id=4007
However please be aware that doing so will wipe ALL the data from your phone such as information in your calendar, contacts and so on.
In order to save your data you can use the PC Suite application to save and restore the data from your phone - this software can be found here :
http://www.nokia.com/pcsuite
One thing to note is that as part of these diagnostics, you should NOT restore any backup or install any software on the phone as you could be putting the problem back onto the phone.
If this doesn't work then it's likely you have a hardware fault and you should approach your local Nokia Service Centre to get your phone fixed.
Hope this helps.
Please let me know how you get on.
Regards,
Edward

Similar Messages

  • Does Screen Resolution Cause Display Problems?

    I just picked up my new 15 inch Retina Macbook Pro with 750m and I changed the screen resolution to the second option,the one with the bigger text but i am noticing that when i close a window, a white horizontal line comes up around where the window was. Is this a screen problem or software related problems? Thank you.

    I agree with Mende1. It sounds like it might be ghosting.
    I have a competely different tip for you: a better way of increasing the size of the text is to use screen zoom. Check here for more info: https://www.apple.com/accessibility/osx/#vision

  • Satellite M40: Graphic Errors when changing screen resolution

    Hi,
    I have a Satellite M40 and a big problem.
    in windows xp pro sp2:
    when a program changes the screen resolution, the screen gets messed up,
    I see only stripes and only a restart can get it back working (or suspend to disk).
    [edit]
    I plugged an external monitor to the laptop and it works,
    the laptop screen is full of lines and the 2nd monitor shows what the laptop screen should normally also show
    [/edit]
    in linux:
    this can be also seen when changing from the xwindow mode in linux back to tty(1-6)
    Here are some pictures of this strange behavior:
    http://www.ronnylindner.de/extern/images/toshiba/screen1.jpg
    http://www.ronnylindner.de/extern/images/toshiba/screen2.jpg
    http://www.ronnylindner.de/extern/images/toshiba/screen3.jpg
    It looks like a hardware problem, but could it be just a wrong bios setting?
    What can I do?
    Bye and thanks in advance, Ronny
    Message was edited by: [email protected]_DE

    I will try it with the Toshiba graphics driver, at the moment I use the newest Omega driver
    I use 1280x800 as normal resolution
    programs giving this error:
    world of warcraft (1024x768) -> working with 1280x800
    age of empires 2 (800x600)
    as I said before, I get this problem also using Suse Linux when I switch from KDE to tty
    thanks you too, hope we can get it working together :-)
    [edit]
    strange, using the Toshiba display driver I got the problem at the first try (aoe2), but now it is not reproducable :-(
    [/edit]
    Message was edited by: [email protected]_DE

  • My IPAD2, which I bought in late March, has two patches of yellowish light on the lower frame of the screen, near the home button. These  spots can be seen especially when dark backgorund application is running. It's a hardware problem?

    My IPAD2, which I bought in late March, is affected by two patches of yellowish light on the lower frame of the screen, near the home button. These  spots can be seen especially when dark backgorund application is running.
    It's a hardware problem?

    Have you looked here:
    fix for Home button
    Fix a broken, unresponsive or sticky iPhone Home Button
    You can use the Accessibility Assistive Touch feature for almost all of the Home button functions.

  • Problems with 3 mobile broadband on lenovo S10e - screen resolution to low ???

    Hello
    This nice new Lenovo Ideapad should be on the mobile internet, but I have run into deep trouble with it.
    3 mobile is installed with a Huawei  E220 usb-modem - when trying to start mobile connection the error message says that it cannot run on less than 600 times 800 screenresolution. The non-adjustabable screen resolution on the S10 is 1024  times 576.
    the "3" support does not want to deal with this problem - any suggestion will be appreciated. Really a pity to have a brand new Net-book that cannot use the modem !!!
    Solved!
    Go to Solution.

    first i changed from original-screenmode to higher screenmode (higher than  ...x600) then the included huawei software will work and i went online, then.....
    ....download the new software from huawei.com!!
    it´s called "partner-software", some networks in europe use it already, download newest client-software for winxp.....(sept.2008) and update the hardware
    http://www.huawei.com/mobileweb/en/doc/list.do?typ​e=-1&id=66
    also for expresscard (e800) or other huawei hardware.
    it´s different as the included hardware - works without this 800x600 screensize question
    most of the european networks already included after installing goto: tools/options/profile managment and then import) or get the dates from your network in internet or hotline....
    have fun
    tiroler
    Message Edited by tiroler on 01-17-2009 12:58 AM

  • Screen resolution in all the programs is really low.

    I recently bought CS6 and the screen resolution in all the programs is extremely low.  The tools and the content of the documents.  I have checked the preferences and I don't see a problem or an option to increase the quality.
    Can anyone help me?
    Thanks

    If this is a retina Mac there is nothing you can do about it. CS6 is not optimized for retina.
    If that’s not what you’re talking about we’ll need some real details.

  • My AT&T Yahoo email gives me an error message saying that my screen resolution is too low, but it is at 1600 x 900. This only happens in Firefox, not in IE.

    When I try to use Firefox to access my ATT.NET account I get an error message about my screen resolution being to low to support the site.My resolution is not low its at the highest available. I also use IE9 and do not have this problem. I am running Windows 7 and Firefox 15.0.1. This has been an ongoing problem. I am using a Toshiba laptop 15.6 screen with 4GB RAM. I see other complaints about this specific problem but have yet to find a solution. Thanks for your help.

    Please see added comments on the question. Its not a zoom issue its all about the new ATT design email and Firefox, I agree with Noah there a bug between the old and the new and firefox only.
    UPDATE:
    I stand corrected. I went back in again and did the reset zoom and it appears to eliminate the error. Problem solved but I am not sure why I never set up zoom and didn't have the problem on any other site. Will it need to be done each and every time I go into that page or is it now corrected?

  • Screen resolution problem - HP computer and LED Cinema Display

    I just purchased an HP Envy Phoenix H9-1330 with Windows 8, and I connected it to my 27" Mac LED Cinema Display, but the resolution is horrible. The highest option in the screen resolution menu is 1280 x 720, and I'm getting the error message "Your resolution is lower than 1024 x 768. Some items might not fit and apps might not open". How do I fix this? What kind of issue is this (Windows 8? Graphics card? HP can't support my monitor? etc...)?
    I just bought another brand new computer, but not an HP, with Windows 8 and I have no problems with the resolution - it looks absolutely beautiful. I want to use my monitor with my HP desktop though.
    Thanks for any help

    Still haven't figured it out....
    BUT I did notice that, on the back of the computer, there are 2 additional DVI connections that are covered with a black cover and screwed in (and they say 'please do not remove'.... I'm asuming it's because they aren't connected to anything? Or maybe they aren't connected to the graphics card?). Is it possible that just my DVI connection is wrong, and I'll need to connect to one of these covered-up DVI inputs instead? But why are they covered up? Do I need to take it in so they can be connected to the graphics card?? Help! I don't want to return this computer, but I will have to if I can't get the resolution fixed.

  • Macbook Pro late 2013 - problem with login screen resolution

    Hi,
    I've got problem with login screen resolution, after upgrade to Yosemite. I use the 4rd resolution (last one) on my Mac Pro (late 2013), and after restart login screen is always on optimum mode... But it's only about the login screen.
    Do you know how can I fix it? I would like to have the same resolution on every screen.
    thx in advance

    I  Reformatted the CF card  on the new computer   it works fine now on the new Mac Pro
    Interesting point about  the low power  of the usb ports   I had to deal with all devices ejecting them selves  when the mac pro  was idle or slept  Drobo needed a Firmware update and another drives  needed  me  to change the sleep setting  or the Mac Pro   to never and  i also  had to deploy a  script to write to each device  ever minute,   this  kind  of sold the problem  with external Hard drives.   I wonder if the lowering  power  to a CF card   can eject  it  in a manor  which would make the  computer  think it is corrupt.
    I have looked at  buying a power usb Hub    but seems only one or two  of the ports are powered. 
    Seems to be a bit problem with the mac pro especially  as everything has to be connected externally  
    Will assume the Firewire Connector does not work.

  • Help please? problems with screen resolution & external monitor

    had a look around this forum and seen many questions about screen resolution when connecting to an external monitor but unfortunately, non that help me answer my problem.
    got a brand new macbook a few months ago and today bought a HP v220 22" external monitor.
    I am new to the idea of external monitors and am unsure what i am doing wrong settings-wise. it seems that no matter what resolution i set either my macbook display, or the external monitor display to. the external monitor is still not sharp.
    Im not sure how to explain what i need but basically i need it to be so that things appear on the external the same size as they do on my macbook screen, so that i will have more space to work in on my external monitor (i am a graphics student) but at the moment what appears on the monitor is lieterally just a magnified version of my macbook screen, hence it lacks clarity.
    the highest resolution offered in the menu for my macbook screen is 1280x800 and my external is recommended to be set at 1680x1050.
    what settings should i have to get the resolution right?
    i will be so so grateful if you can help. i think ive tried every single display setting but to no avail. so please help me!

    The 13.3" screen on the MacBook running at 1280 x 800 will have a ppi (pixels per inch) of around 113. A 22" monitor running 1680 x 1050 will have a ppi of around 90. So it is natural that it will look magnified compared with the MacBook. The two displays have different a pixel pitch.
    Since there are no monitors with ~113 ppi out there in the market, what you want to do with having the same size and sharpness between the MB and a monitor will not be possible.
    If you ran the MB's screen at 1024 x 640 (not even sure if that is an available choice), then the two screens would match in terms of "magnification." But the MB isn't going to look very sharp running such a low, non-native format.

  • Fuzzy text characters on Tecra 9100 with low screen resolution

    When using the standard Toshiba S3 video drivers for Windows XP I seem to be experiencing problems with the display when the resolution is set to 1024 x 768 or lower.
    Any text on the screen is fuzzy / weird quality.
    If I select a higher resolution the screen is fine with crisp / sharp text.
    Does anyone know how to resolve this problem?
    Thanks in advance.

    Hi Simon
    Dont panic! This is not a malfunction or a problem
    The native resolution of your internal screen should be higher as 1024x768 therefore you should leave the notebook running with the highest possible resolution.
    This issue was discussed already in this forum. You should check this:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=20874&messageID=77722
    Hope it helps to clarify everything

  • Low screen resolution?

    Hi,
    I recently had to run diskwarrior to do some rebuilding on my machine but ever since the screen resolution seems to be lower than previously. This is particularly noticeable on photos.
    I've been into preferences to check the screen is set to the highest setting, which it is, so I'm not sure why it has changed.
    Can anyone help?
    Thanks

    Have you tried setting the resolution to the lowest setting in System Preferences, and then switch it back to the lowest resolution?
    If that doesn't work, try creating a new Colorsync profile and see if the problem lies there.
    If none of these solutions work, I would say that you may have to do an erase and install of Mac OS X or at least look for a corrupted file.

  • SAP Offline Player - Screen Resolution is too low

    I have a customer that has the SAP offline player 6.02_5 and is working from two monitors.  He appears to have his monitors configured identical from my dual monitor setup in which I have no issues but he is getting a pop-up that reads:
    This computer does NOT meet the minimum requirements (Current 1024x640/ Required 1024x768+)  Your screen resolution is too low.
    Could this possibly be a video card issue?  Everytime that he tried to launch the SAP Offline Player the message above pops up on the users pc.  Any ideas?
    Your response is greatly appreciated.
    Regards,
    Matt
    Edited by: Matt Marion on Aug 14, 2009 4:29 PM

    One person reported he found an app with a simular problem. Unfortunatly there is no real fix. Yell at the maker of the app for not supporting something as basic and trivial as 720p. 

  • Visibility of the font in tabs, search window and tool bars is too low for me. (My vision is declining). Can I make these larger? Screen resolution is 1280X1024

    I find the font size used in the tabs, headers, etc too small. Maybe I'm missing something, but I can't find a way to increase it. Also the icons for accessing Bookmarks and Home page is small and hard for me to deal with.
    I do resize web pages, using Ctrl and +, that's not my problem.

    This is related more to Operating System settings, ie Windows 7 in your case, as the interface is using your OS. You could change the OS settings , or even the screen resolution. A lower resolution will actually give you bigger text.
    Changing one of the Firefox preferences also has that effect, I will turn on my other machine and look for the answer as to which one it is.

  • EHP1 Upgarde Monitor screen resolution problem in a support message

    Hi Experts,
    We have recently upgraded our Solution manager to EHP1, iam facing a screen resolution problem with 15 inch monitors.
    Our key users have 15 inch monitors to their system and when they try to reply a support message under transaction data-> Overview tab -> reply it is showing only one line for them , due to which they are unable to enter the complete data in it.
    How ever We have found that this does not occur with 17 inc monitors as the required screen resoution 1280* 1024 is possible due to bigger size of the monitor.
    can any one suggest how to make the overview tab visible completely with small resolution monitors.
    Thanks
    Nanda

    >
    Nanda Kishore wrote:
    > Hi
    >
    > There is an note from sap on this issue i couldnt remember the note number which talks about updating your package levell
    >
    > Kindly check this note it was released in SEP 09 a very recent one. this will resolve your probelm.
    SAP Note 1351673      Size of containers not changed for support messages       
    Best regards,
    Ruediger

Maybe you are looking for