N95 maps Route Not Found

Hi All
well I purchased a 30 day licence on the mapping software and I must say the whole thing seems very buggy when compared to "other" products available.
My Problem is this, I have downloaded the maps via map loader (2 hours for uk!!) but when I go to plan a route I keep getting route not found!!!! any ideas???

hell yea! stop buying **bleep**py **bleep** !
just kiddin`
contact the nokia support and see what`s their opinion about this problem. find the support on www.nseries.com ... i`ve heard that they solve most of the problems

Similar Messages

Route not found on nokia maps

Hi can anybody help.
I updated my firmware on my N95 recently and now when I try to plan a route a keep getting 'route not found' message.
I can see the local area map when I get a gps connection but if I type in an address , which is not in surrounding area I get the message above. If I move the map pointer in maps around I can move to an area where roads etc disappear.
For example I have my home address in landmarks and my work (approx 10 miles apart) and even though I'm able to see surrounding maps when I'm at either place it will not calculate a route from one to the other.
Help

We found that the N95 needed to be "on line" before it would calcualte a route.

Error in jbosscmp-jdbc.xml : datasource-mapping Pointbase not found

Hi I'm having problems deploying my EJBs using the Pointbase Database.
This is what I'm working with:
standardjbosscmp-jdbc.xml:
<jbosscmp-jdbc>
   <defaults>
      <datasource>java:/PointbaseDS</datasource>
      <datasource-mapping>Pointbase</datasource-mapping>pointbase-ds.xml:
<datasources>
     <local-tx-datasource>
          <jndi-name>PointbaseDS</jndi-name>
<connection-url>jdbc:pointbase:server://localhost:19092/sample</connection-url>
          <driver-class>com.pointbase.jdbc.jdbcUniversalDriver</driver-class>
          <user-name>jboss</user-name>
          <password>password</password>
     </local-tx-datasource>
</datasources>jbosscmp-jdbc.xml:
<jbosscmp-jdbc>
     <defaults>
          <datasource>java:/PointbaseDS</datasource>
          <datasource-mapping>Pointbase</datasource-mapping>
     </defaults>I keep getting the error message:
org.jboss.deployment.DeploymentException: Error in jbosscmp-jdbc.xml : datasource-mapping Pointbase not found
Any ideas why?
Thanks.

By the way I'm using JBoss server.

E71 GPS 'route not found' when using device only s...

Hi, earlier today I was getting help to not get AT&T network data charges. I have set everything up per direction but now when I try to search for something and navigate to it I get 'Route not found'. Any ideas how to fix this?
Solved!
Go to Solution.

Start with a simple and obvious search string. If you give us an example of a search string that did not work we could have a look at it for you.

WRT54G3G – "Router not found" when trying to configure broadband cable network

Hi,
I have a WRT54G3G, v.1.1 router. I have used it successfully for ~3 years with mobile Internet (Huawei E800 card). Recently I installed broadband cable network in my place, tried to configure WRT54G3G to work with it and failed…
I tried manual configuration, and I was not able to set it up. I downloaded „Setup Wizard”, and tried all three options:
a) 3G/UMTS or GPRS
b) Broadband WAN Only
c) Broadband WAN and 3G/UMTS or GPRS
Only option a) can be completed successfully. When I try b) or c), I get following message from „Setup Wizard”: „Router not found, Please make sure the router is properly connected and try again.” I am sure I connected all cables as instructed.
When I plug cable network directly to my PC’s Ethernet slot, it is automatically configured, and all is working fine.
Can anyone advise please what to do? Thank you!
Best regards,
Jakub
Solved!
Go to Solution.

What is the ip address of your router? It seems like the WRT54G3G is already talking to your modem and is getting the connection properly. Make sure that the WRT is not on the 192.168.1.x segment.

Routing not found

Hi friends,
i have created routing for finish product .in MTO senario i went for MRP RUN after sales order is entered. .the corresponding planned order is created . but when itry to convert the planned order to production order a message is coming like <b>routing not found</b>.
so please syuggest what to do?its urgent
feasible answer will be awarded
THANKS & REGARDS
OM

OM,
Check whether the routing is having valid status and Usage 1 or 3 - Status - 2 or 4. This you can check in the routing header.
Also check the validity based on Lotsize , whether the sale order quantity is within lotsize mentioned in the header of the routing.
Also check the Validity start date of the routing in the header, the Plannned order start date should be latter than the routing valid start date.
Regards,
Prasobh

ADAggregationManager::GetNestedParents() -- Mapped group not found in graph

Hi,
I am new to Crystal Reoprts.
We are getting errors in the same package. Users are getting authenticated OK, but we are unable to retrieve their privileges, Crystal Reports (V2.5) should be displayed based on AD groups they belong to.
CMS logs show,
[Wed May 28 15:20:45 2014]
2288
5256
assert failure: (Y:\authentication\WindowsADAuthen\ADAggregationManager.cpp:1143). (0 : WINAD: ADAggregationManager::GetNestedParents() -- Mapped group not found in graph!).
[Wed May 28 15:20:45 2014]
2288
5216
assert failure: (Y:\authentication\WindowsADAuthen\ADAggregationManager.cpp:1143). (0 : WINAD: ADAggregationManager::GetNestedParents() -- Mapped group not found in graph!).
[Wed May 28 15:20:45 2014]
2288
5256
assert failure: (Y:\authentication\WindowsADAuthen\ADAggregationManager.cpp:1143). (0 : WINAD: ADAggregationManager::GetNestedParents() -- Mapped group not found in graph!).
Any help really appreciated.

That helps a bit more. CE 10 is end of life a long time ago.
You can get the SDK help files for current versions from here:
help.sap.com
I don't believe the API's have changed for this part so use the SDK helpfile for more info.
You may be able to find examples here:
Crystal Reports for .NET SDK Samples - Business Intelligence (BusinessObjects) - SCN Wiki
Don

310n router not found

I have read the posts to see if I can find help but everything that has been said I tried.
We have a static ip address 192.168.1--.1-- dashes are actual #'s i left out. I also have mask, gateway, dns servers info. When I run CD say router not found. I also have no connection to internet when all wires are set up properly. "this prevents me form accessing 192.168.1.1 on the internet to change anything. can I take router home and make changes through my home optonline connection and bring back to work. Would that work? Any other ideas.
thanks in advance

If you are using cable connection in Office also .... then you can take the router at home & configure the wireless router according to Optimum Online .... then again bring it here & connect it ...
Make sure that you should do power cycle .....after connecting the Router here with Modem .....

SAP PI 7.1 Mapping resource not found

Hello Gururs,
We have been experiencing the issue on our QA SAP PI system after upgrade to 7.1 eHP1.
We just imported new set of components under new SWCV and namespace. While trying to process the message, getting below error. I already checked all system accounts and every thing looks Good. Performed full SXI_ CACHE and CPACACHE. Also performed the steps given in note 764176. Any suggestions would be appreciated
Runtime error
Unable to find resource 46c20a71-248e-11dc-c4be-dd500a115642 in the following software component versions: http://sap.com/xi/SNC/GlobalZ_OrdersOrders05_ReplenishmentOrderNotification_0~-1
Unable to find resource Z_OrdersOrders05_ReplenishmentOrderNotification_02.xsl in the following software component versions: 46c20a71-248e-11dc-c4be-dd500a115642 Thrown:

I tried this option still same error.
I think this is what happening from error message.
1. ABAP runtime is able to identify and locate Operations mapping.
2. ABAP determined it as xsl mapping so made call to Java runtime for execution.
3. Java runtime is not able to locate the xsl map in runtime cache.
4. I can see this map in SXI_CACHE
5. These set of newly deployed maps are not there in cache monitoring from RWB which shows java runtime doesn't have these objects in cache.
Again appreciate if you have any other ideas.

Interface test fails during mapping - Resource not found

Just upgraded from 7.1 SP8 to EHP1 SP3. Testing of the existing interfaces has been successful. I have created a very simple HTTP -> RFC Sync interface to complete the testing. When testing it in the integration builder I get the following message.
+Unable to find resource 5e0ce8a0-b99a-11de-9eb4-c576ac120353 in the following software component versions: urn:xxxxx.com:PI71com/sap/xi/tf/_MM_ONE_.class-1+
I've checked cache status overview in the ID and ESB and the updates were successful. I've checked the cache (SXI_CACHE) and the objects are there - correct object ID's. I;ve also performed a full cache refresh and that works. I then recreated the objects under a new SWCV and Namespace and get the same problem. It looks like the mapping object cannot be found. Checks of SDN and SAP help have mentioned a cache problem but we've ruled that out.
Any help you can offer would be appreciated.

I've just noticed something unusual about the entry in SXI_CACHE. Under mapping the type of mapping appears as 'JAVA_JDK'. When you click on the drop down box next to the entry the possible types of mappings are...
R3_ABAP
JAVA
Xi_TRAFO
XSLT
RS_XSLT
I'm not sure if this is an issue or not. I've checked SDN and SAP SUPPORT and I can't find anything.

Error with "Mapping Program not Found"

We exported all of our XI development from DEV and imported it to Prod. We have not changed anything at all. Now, even though I have authority I can't go into EDIT mode in Prod.
The main problem is that even though everything imported into Prod without error, when we run our program we are getting the following error:
<b>="MAPPING">NO_MAPPINGPROGRAM_FOUND </b>
What could have changed and were do I start to look?
Thanks in advance, will reward points.
Mike Curtis

Micheal,
You dont need to externally import XSD's and WSDL's. If you import the whole software component or the whole namespace then they will come automatically.
Check in message mappings whether you can see the mappings or not? I think you might have exported object by object not the whole SWCV. If it is yes then you also import the message mapping. Also check in your change list whether there are any objects. If yes please activate them.
By the way you dont see only the one message mapping you are tyring to check or all of them? Dont edit anything in production. Its not good. So dont enable the edit button as other threads reply.
---Satish

Router not found

Can somebody try and help me please?
Ok here is the problem I have 2 computers in my house. Computer A is the one that I have the Modem and wireless router on. Computer B is the one I have the wireless card in. Computer A was having problems connecting to the internet while Computer B has always been working. We called brighthouse they got the Computer A working then the Computer B will not work. I tried uninstalling the router and wireless cards then restalling then but it is saying that they can not detect a router.
Router model number is: wrt54gs
Router version number is: 6
Wireless card model number is: wmp54g
Wireless card version number is: 4.5
Thanks in advance

Hi,
brighthouse is cable connection, right? in some cases, router will just work automatically with no configuration at all, but there are some cases that u need to enable mac clone on the router for it to work.
Try to ping router...click on start then run, type cmd press ok, then type ping<space>192.168.1.1 if u can get replies good since the router in communicating to the pc...if not there's a problem with the connectivity.
How long have u had the router?
Message Edited by shally on 06-25-2007 07:19 PM

Test Configuration Tool: Sender Agreement Not Found

Hi, All:
We have new XI3.0 setup and I just want to test simple file to file scenario, but the file was picked up by sender file adapter, however, there is no message sent to Integration server.
When I use Test Configuration Tool, the sender agreement is green, however, it also mention Sender Agreement Not Found, see below:
================================================
Sender Agreement
================================================
futhermore, Interface Mapping is not found either. Actually, Interface has been created on IR. Sender Agreement also created in ID.
Anyone who has idea about these two errors ?
Thanks in advance
Liang

Hi, Raj and Srinivas:
Thanks for your reply.
First of all, all the objects are activated, secondly, when create sender agreement, I just need to input the Sender Service Name / Sender Interface / Sender Interface Namespace. Then finally select commnication channel.
For any Receiver sides, they are grey out, I am not able to input anything.
So, there is no "*" in any fields.
I doubt if there is any setup wrong, especially for adapter engine, maybe some modules that are not functional for file adapter engine, since I also see other problems, I might post them as separate thread.
In Adapter monitor page, I did not see the adapter.
In RWB, if I use IE, there is Error in the page, using Firefox, it is OK.
Thanks And Regards !
Liang

HT4623 By updating my iphone 4 by IOS 6 the map is not working when i ask for route between places it gives direction not found between places

I have updated my IOS to IOS 6 of my iphone 4.
When i ask for route between two famous places, it gives reply that direction not found between places.
I dont understand
Whats this

I had the same experience with a new iPhone 5 that I bought last week. Did not have a chance to measure battery life before the 6.0.2 upgrade installed but I set up my phone exactly like my 4S and immediately started running out of power after short periods. Went to Xmas get together with fully charged 5 and 4S. Heading home the iPhone 5 shut down for low battery and the 4S had 65% power. Both phones had two half phone calls on then and no data usage.
That night I fully charged the iPhone 5 and, without lighting it up, put it on my night table. Next morning I picked it up and looked at battery indicator and I had 42% charge with NO activity!
Tried it again next night and wound up with 37% charge. (Slept longer).
Today I called the carrier and reactivated the 4S. Took the 5 to Apple Store and they kindly gave me choice of new replacement phone or refund. I took the refund. Uniquely, the Apple Store said it was Verizon CDMA phones that were coming back.
The are other strings on this with temporary solutions, but from my experience with 7 firmware changes on an HTC 4G phone the problem will continue because the solution will be hardware caused. We are in the days where RTM means Rush to Market - not Release To Manufacturing.
I fear the only solution is to either wait for the next model (I did not notice a really major change in performance over the 4S in LTE heavy Seattle area) - or switch to another manufacturer.
It might be useful for these forums to indicate if you have a GSM or CDMA phone to see which have more problems.
Discouraged....

FILE not found error: j2ee/home/applib/applications-mapping.xml (No such fi

Hi EveryBody
i have my applications-mapping.xml file already in the applib directory, but when i try to conect to a remote ejb i had this error[b]
FILE not found error: j2ee/home/applib/applications-mapping.xml (No such file or directory)
can anyone help??

gday
Is the error on the client or server?
What role in the application does applications-mapping.xml fulfill?
How are you loading the file in?
-steve-

N95 maps Route Not Found

Similar Messages

Maybe you are looking for