N95 Multimediamenu problems, help please :)
Hello! I have a minor problem with my N95-1. You see, when I push the "screen" to the side its said that you will access the multimediamenu by default. Well... Mine doesn't! Anyone got a solution for this one? (No im not pushing it to the wrong side)
Hi forkz
I expect you have seen this post by "mjkass" although it may not be relevant to you:
/discussions/board/message?board.id=smartphones&message.id=68838#M68838
Happy to have helped forum in a small way with a Support Ratio = 37.0
Similar Messages
-
N95 8GB problems, HELP PLEASE!
MY n95 8gb turns off by it self sometimes or ends calls within good range of an antena or most of all says the following message when trying to make a call: Connection error (no ring tones or nothing, i tried calling the provider company, switched the sim into another phone, and its not the providers error, because the sim card works fine with a different phone.
I have my n95 for 1 month and i never had such a problem.
another question: HOW DO YOU PERFORM MASS MEMORY FORMAT SO, after doing that my phone will be 100% functional but clean! ???To format the mass memory goto Tools=>Utilities=>Memory=>Options=>Format Mass Memory
Also you can use these codes
*#7780# Factory Reset
or
*#7370# Format phone -
VIRUS PROBLEMS, HELP PLEASE???
I continue to have messages popping up saying my computer is infected. It wants me to cleanup and I have to register with Mac Shield 2.6. Pronograhic websites keep popping up. Anyone having this problem? Did not have this problem yesterday, but it's here today! There is also a Red Sheild on the top of the toolbar where it shows the time, battery life, etc. Right clicking on the sheild drops down Scan Now, Cleanup, Control Center, Scan, System Info, Settings, About, and Register. A pron site just popped up again! Need help Please!!
Fuony wrote:
The Mac Shield malware can come through Firefox too if you allow it to and you click on it!
Your exactly right, it is possible that if you visit a site and need the scripts to run for something that the malware that uses Javascript is on that site, then your going to be presented with it.
The thing is with the Firefox + NoScript combination defeats alot of the web side trickery the malware authors are using to get the malware to appear in the first place.
Also this "MacDefender" isn't the only malware making the rounds. There are some serious Flash vulnerabilities being hosted on hostile/adult websites that are running scripts for no apparent reason other than to try to infect your machine.
By running all scripts all the time, your computer is in a state as if you tried running across a busy highway blindfolded.
As a lifelong "MacHead" I can understand Apple loyalty, but if Apple isn't cutting the mustard on their browser security, rather place their users security at serious risk for the sake of convenience, then I have to think about using and recommending to others something else that is more secure.
As a example, I surf thousands of web pages a day, some on really nasty sites, yet I haven't seen this "MacDefender" appear on my computer. Even when I purposely visited links that people have submitted that had the malware. (I maintain a couple of bootable clones of my boot drive just in case) -
I have an iPhone 6 and during the setup I must have did something wrong and now I have my old iCloud account on it that I no longer remember the password, security questions, and no longer have the email address to that account. I think I was hacked and my password and security questions changed. I want to log out of iCloud and start using my current iCloud account. I know these are security measures, but how can I get logged out??? My iPhone is having problems since the latest update and now I can't make a call or text. I can't call apple support without a working number HELP Please.
Hello shelbyrecords,
Oh no! That sounds really frustrating. Unfortunately, if iCloud Find my iPhone Activation Lock is enabled on the device we’ll need to gain access to your previous Apple ID account to disable it. Based on the information you have provided, it sounds like you may need a personalized support experience to recover your previous Apple ID:
If you forgot your Apple ID password - Apple Support
http://support.apple.com/en-us/HT201487
Make sure that you’re entering the correct Apple ID. In most cases, your Apple ID is also the primary email address of your Apple ID account. If these steps didn't help you change your password, contact Apple Support.
Thanks,
Matt M. -
Soundtrack problems - help please
Help please. I tried doing a send to multi-track project from FCP with the base layer video option and kept getting the 'error sending selection to Soundtrack Pro' message. I did a search and the suggestion is that I have no disk space but I have over 600GB!
Then I tried a send with the full video and the file saved okay. However when I try to open the .stmp file, Soundtrack Pro starts and then freezes. I've tried opening in various ways.
Help please, I just cannot figure this out! What am I doing wrong?Not sure how much help this is, but since you're having problems with the layout, did you try deleting the layout file? MacintoshHD/users/username/Library/Application Support/Soundtrack Pro/Layouts
BTW, I found a BKiLifeConfiguration.plist in the following path:
MacintoshHD > Library > Application Support > ProApps > Internal Plug-ins > BrowserKit > iLife.bkplugin > Contents > Resources
Do you find it there? -
SQL INSERT problem - help please
Hello,
I'm having a problem with INSERT statement.
There is a "ShowFinal.jsp" page, which is a list of candidates who selected from the second
interview. The user picked some candidates from the list and conduct the 3rd interview. After
he check suitable candidates(who are selected from the 3rd interview) from the list , enter
basic salary for every selected candidate, enter date of interview and finally submit the form.
These data should be save into these tables.
FinalSelect(nicNo,date)
EmpSalary(nicNo,basicSal)
In this "ShowFinal.jsp" page, it validates the following conditions using JavaScript.
1) If the user submit the form without checking at least one checkbox, then the system should be
display an alert message ("Please select at least one candidate").
2) If the user submit the form without entering the basic salary of that candidate which was
checked, then the system should be display an alert message ("Please enter basic salary").
These are working well. But my problem is how to wrote the "AddNewFinal.jsp" page to save these
data into the db.
Here is my code which I have wrote. But it points an error.
"AddNewFinal.jsp"
String interviewDate = request.getParameter("date");
String[] value = request.getParameterValues("ChkNicno");
String[] bs = request.getParameterValues("basicSal");
String sql ="INSERT INTO finalselect (nicNo,date) VALUES(?,?)";
String sql2 ="INSERT INTO EmpSalary (nicNo,basicSal) VALUES(?,?)";
for(int i=0; i < value.length; i++){
String temp = value;
for(int x=0; x < bs.length; x++){
String basic = bs[x];
pstmt2 = connection.prepareStatement(sql2);
pstmt2.setString(1, temp);
pstmt2.setString(2, basic);
int RowCount1= pstmt2.executeUpdate();
pstmt1 = connection.prepareStatement(sql);
pstmt1.setString(1, temp);
pstmt1.setString(2, interviewDate);
int RowCount= pstmt1.executeUpdate();
Here is the code for "ShowFinal.jsp".
<form name="ShowFinal" method="POST" action="AddNewFinal.jsp" onsubmit="return checkEmpty() &&
ValidateDate();">
<%-- Loop through the list and print each item --%>
<%
int iCounter = 0; //counter for incremental value
while (igroups.hasNext()) {
Selection s = (Selection) igroups.next();
iCounter+=1; //increment
%>
<tr>
<td style="background-color:ivory" noWrap width="20">
<input type="checkbox" name="<%= "ChkNicno" + iCounter %>"
value="<%=s.getNicno()%>"></td>
<td style="background-color:ivory" noWrap width="39">
<%= s.getNicno() %> </td>
<td style="background-color:ivory" noWrap width="174">
<input type="text" name="<%= "basicSal" + iCounter %>" size="10"> </td>
</tr>
<%
%>
Date of interview<input type="text" name="date" size="17"></td>
<input type="submit" value="APPROVE CANDIDATE" name="B1" style="border: 1px solid #0000FF">
</form>........................................................
Here is the error generated by TOMCAT.
root cause
java.lang.NullPointerException
at org.apache.jsp.AddNewFinal_jsp._jspService(AddNewFinal_jsp.java:70)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:137)
I have goto the file "AddNewFinal_jsp.java". The line 70 points to the following line.
for(int i=0; i < value.length; i++){ [/b]
Please can someone help me to solve this problem? Please help me to do this task.
Thanks.Hi Casabianca ,
It is clearly that your problem is not on the database end, more like a servlet/jsp issue.
I will not comment on the javascript portion, but rather the 2 jsps.
a simple way to trace what's go wrong is to check the final result (the html code) of the first jsp (showFinal.jsp), and compare against what is expected by the 2nd jsp (AddNewFinal.jsp). Most browser do provide "view source" on the page visited.
the following code
<input type="checkbox" name="<%= "ChkNicno" + iCounter %>" value="<%=s.getNicno() %>">
<input type="text" name="<%= "basicSal" + iCounter %>"
would likely to be "translated" to html code something as follow:
<input type="checkbox" name=""ChkNicno0" value="nicNo>">
<input type="text" name="basicSal0">
the original code in "AddNewFinal.jsp" using
request.getParameterValues("ChkNicno");
which looking for a none exist http request parameter (sent as "ChkNicno0",etc but look for "ChkNicno"), which has explained before.
the second attempt to use String[] value = request.getParameterValues("ChkNicno" + iCounter); give Cannot resolove symbol :iCounter. because iCounter never defined in the 2nd jsp!
Most of the error message do give clue to cause of error... : )
not too sure on your intension, assume you wish to update only those selected (checked) row to db.
some suggestions:
1) <input type="text" name="ChkNicno" size="10"> </td>...
<input type="text" name="basicSal" size="10"> instead.
then use javascript to based on checked element index (refer to javascript spec for more details), for those index not checked, clear off the correspond index "basicSal" field value.
e.g. ChkNicno[1] is not checked, empty basicSal[1] value before submission.
This will give us only selected rows values.
2) retain the code
String[] value = request.getParameterValues("ChkNicno");
String[] bs = request.getParameterValues("basicSal");at 2nd jsp, as now the http request will pass parameters using "ChkNicno" and "basicSal".
3) some change to the code for optimization
for(int i=0; i < value.length; i++){
String temp = value;
for(int x=0; x < bs.length; x++){
String basic = bs[x];
pstmt2 = connection.prepareStatement(sql2);
pstmt2.setString(1, temp);
pstmt2.setString(2, basic);
int RowCount1= pstmt2.executeUpdate();
pstmt1 = connection.prepareStatement(sql);
pstmt1.setString(1, temp);
pstmt1.setString(2, interviewDate);
int RowCount= pstmt1.executeUpdate();
to
pstmt1 = connection.prepareStatement(sql);
pstmt2 = connection.prepareStatement(sql2);
for(int i=0; i < value.length; i++){
String temp = value;
for(int x=0; x < bs.length; x++){
String basic = bs[x];
pstmt2.setString(1, temp);
pstmt2.setString(2, basic);
int RowCount1= pstmt2.executeUpdate();
pstmt1.setString(1, temp);
pstmt1.setString(2, interviewDate);
int RowCount= pstmt1.executeUpdate();
preparestatement created once should be sufficient as we do not change the sql statement throughout the loop.
there are better solutions out there, this just some ideas and suggestions.Do try out if you wish.
Hope it helps. : ) -
Multiselect problem Help please!!
Hi all,
I am currently using Application Express 3.1.2.00.02 I have developed an online questionnaire with a multiselect list for one of the questions. The problem i am having is that i need each choice to be totaled up separately on the report generated.
My table of answers looks like this:
Column name e.g. (Question 9)
Answer "Dog" "Cat" "Mouse" "Snake" (underneath column name Question 9 depending on what is selected).
The reporting page would look like below:
*(Column Question 9)* Count
Dog 1
Mouse 1
Snake 1
and for the question you could have another respondent who chooses similar of items on the multiselect, so their answer looks like this:
Answer
"Question 9" Dog
"Question 9" Snake
This would then start a new row on the reporting page like below which is not what i want:
*(Column Question 9)* Count
Dog 1
Mouse 1
Snake 1
Dog: Snake 1
But the report should look like this:
*(Column Question 9)* Count
Dog 2
Mouse 1
Snake 2
The current SQLquery i am using is below:
select "QUESTION 9",
count(*) c
from "P1 DQUESTIONNAIRE"
group by "QUESTION 9"
Thanks for your help and suggestions,
'S'How to make sure your forum post will never be answered:
1) Make sure your subject line is completely meaningless (i.e. HELP PLEASE!) and describes no part of your actual problem
2) State that you are having "a few problems" but make sure to offer no details whatsoever what those problems are or what the symptoms are.
3) Post large volumes of code instead of distilling the problem down to a compact snippet
4) For extra points, make the code hard to read by refusing to make use of the "code" tag. -
K8N Neo2-fx Ram problem Help please
I have three ram(2x512MB single sided , 1x1GB double sided). Is there any way I can put them all on the motherboard? When I place them all the computer is not starting and it`s making a "beep" every 2-3 seconds. If i connect the 1GB double sided on the Dimm1(green) and the one 512MB single sided on the Dimm3(green) it`s working properly. Is there any way I can use all my ram at the same time. I`m desperate. Help please... thank you
Quote from: wodahS on 09-November-06, 05:55:17
How can I put my computer facts under any post I am posting? I should make it my signature?
That's the rule mate which you need to gives all your component in details including your PSU and Bios revision so that others can help you! Like what BOSSKILLER say it won't works with 3 DIMMS unless you purhased another 1 GB of RAM then it can solve your problem with 4 DIMMS or else with 2*512MB RAM. Make sure that you've lowered your HT to <=800Mhz as default is 1000Mhz. GD luck. -
I have an N95 RM 1, and it wont power on properly. It just sits on the nokia start up screen and vibrates, continuously in one long "brrrrrrr ". I have tried the hold 3 * and green key but to no avail, but am I doing it wrong? I just hold the keys, then switch it on and hold for about a minute before giving up. Its not recognised by windows cause it wont start. Any suggesstions?
The 3 finger deep reset can be difficult to execute properly. Have a read of the instructions below and see if you are doing it correctly.
Always remember to backup your phone before performing resets as your data may be lost.
Before you reset, remove the battery for at least 5 minutes and then replace and see if that makes any difference. Also try removing the memory card.
Then try the "3 finger deep reset". With the phone powered off, depress and hold these three keys simultaneously "*" "3" "green phone" and then power on phone using the on/off button whilst keeping the three keys depressed until you hear start-up tone. -
Shockwave Player 11 - Problem HELP PLEASE!!
I have upgraded to Shockwave Player 11 but I am having big
problems. I have installed it but when going on a Shockwave
supported sites ie; iSketch, it comes up in a white-box with a
message ''Adobe Shockwave Player is now installing.'' ''Installing
compatibility components.'' with a white bar below which is
supposed to fill up but doesnt. Screenshot on Link below. I have
been trying it both on IE7 & Firefox, tried both semi and full
installer but no luck. Please help?
http://i7.photobucket.com/albums/y295/ldndude/others/ShockwaveFlash11Problem.jpgquote:
This worked for me. It will actually let me access the game,
but it is unplayable. The drawings are all just random lines. When
I draw people see this problem, it looks like I am just drawing
random lines on the canvas.
I'm glad 4 helping u.4 me all the games r playable.But the
new ones like....
http://www.miniclip.com/games/power-boat/en/
or
http://www.miniclip.com/games/rally-championship/en/
r very slow. -
Please help I am un able to get my I Tunes back on my Windows 7 -64 after a Virus clean out, How can I solve a problem with the followin ITunes error of -42404 I have tried the usual uninstall and reinstal, as well as the repair all at no success, do any of you have any solution Ideas that have solved this in the past? Please Help, Thank you...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2 -
Possible line problems - Help Please?
Good Morning,
Been having a lot of problems with slow speeds and the Hub disconnecting recently. I suspect this is to do with the phone line as my setup has not changed since previous issues I had with internal wiring which I fixed with help from people on here...
Anyway, my Hub is connected directly into the test socket and my stats are as below. This doesn't seem right. My noise margin seems very low and the number of errors and events seem rather high. My IP profile has been higher in the past and stable until a few weeks ago.
I realise the connection is not 'stable' as it's been less than three to five days - I'm struggling to keep a connection for 24 to 48 hours at the moment without a reset so this is good for now!
Any help from Mods or others much appreciated. Not much I can do at this end.
Thanks,
Dan.
ADSL Line Status
Connection Information
Line state: Connectedppp0_0
Connection time: 2 days, 08:27:20
Downstream: 2.188 Mbps
Upstream: 448 Kbps
ADSL Settings
VPI/VCI: 0/38
Type: PPPoA
Modulation: G.992.1 Annex A
Latency type: Interleaved
Noise margin (Down/Up): 2.5 dB / 20.0 dB
Line attenuation (Down/Up): 61.8 dB / 31.5 dB
Output power (Down/Up): 17.7 dBm / 12.3 dBm
FEC Events (Down/Up): 178731265 / 1208
CRC Events (Down/Up): 288943 / 1108
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
HEC Events (Down/Up): 418976 / 3497
Error Seconds (Local/Remote): 38442 / 1298
Download speed achieved during the test was - 1.6 Mbps
For your connection, the acceptable range of speeds is 0.4 Mbps-2 Mbps.
Additional Information:
Your DSL Connection Rate :2.24 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
IP Profile for your line is - 1.75 Mbpsas you are in the test socket already are you using a new filter? tried changing the modem rj11 cable? do you use a phone extension cable to connect to test socket?
check this post for other ideas uk sales 08007830056
http://community.bt.com/t5/BB-in-Home/Poor-Broadband-speed/m-p/14217#M8397
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
K8mm-ilsr Problems help please
i have a k8mm-ilsr when i use my 9800 np my monitor randomly shuts off nad comp wont respond thats with ram at 400mhz if i turn ram to 333 it runs longer but randomly monitor shuts off when i use my 9600 it runs flawlessly but i want to use my 9800 as thats why i went to 64 bit i hvae tried everything in the bios and still same trouble i have 450 watt psu 1 x 512 ddr 400 power color 9800 np i have tried this card in other comp with no problems please help lol thanks peeps
sorry i was reading those sticky's and im not sure if my lonely little psu is enough if anyone understands it can you tell me if mine is enough i have a amd athlon 2800+ 64 bit
9800 np
1 cdwr
1 160 maxtor hdd
iceberg fan on vid card and 1 lite case fan a one normal case fan and of course stock h/f
nothing overclocked
but i have tried overclocking and it crashes same way as if video konks out and i know card is good tried it in other system -
I have a problem, help please !
here is the first script I written by JSP:
<html>
<body>
<% String you=request.getParameter("you");
if ( you == "home" ){
out.println("home");
else
out.println("else");
out.println(you);
%>
<body>
<html>
and here is my URL: http://localhost:8080/niit/1.jsp?you=home
acording to that script, why doesn't it print "home" although you = home ? please help me, thanks.This is not a problem with JSP but with core java:
'you' is a reference to the object you created:
String you=request.getParameter("you");"home" is a reference to the another String object.
Because these references aren't the same you'll never receive 'true' when comparing:
if ( you == "home" ){The '==' operator DOESN'T compares strings' values. It just compares references.
Once again:
String a = "a text";
String b = a;
if (a==b) // this gives 'true'
But:
String a = "a text";
String b = "a text";
if (a==b) // this gives 'false' because a and b aren't the same object.
// they just have the same value and that's the difference.
Try with 'equals' method:
if (you.equals("home"))
That works !!! -
CoolEditPro 2.10 problem - help, please!
I've got a copy of Cool Edit Pro 2.10 on my PC, just loaded the software. When I hit the Record button, I get the following popup message:
Input Device Error
A device ID has been used that is out of range for your system.
I've downloaded the PDF Manual that came on the disc, but I cannot find anything in the manual regarding input device. I also cannot find anything about a device ID, or what the "range of my system" really means.
I called Adobe Audition tech support, and they told me I'd just have to upgrade to Audition, and that CEP was not supported anymore. There MUST be a simple answer for this so the software will operate and record.
Please help if you can. My email is: [email protected]
Thanks- RussAre you using windows 7 ? If yes then Cool Edit Pro is not compatible. If you are not on windows 7 then the problem might be your device settings.
Go in: Options > Device Proprieties and play with these settings. Then go in Options > Device Orders and play with these settings.
I recommand to set your soundcard input/output as the first device in Wave in / Wave out... Midi: your Midi ports if you plan to play with Midi. Also, you can't record Midi in CEP. You can open and edit Midi tho.
You can also open: Options > Windows Recording Mixer. Set your recording device.
By the way you should post here your computer specifications.
What is your operating system soundcard cpu memory etc and what do you use to record?
Maybe you are looking for
-
Back-end communication error for r/3 parameter search
Hello everyone, Have been facing this problem for sometime now.When i was clicking on <b>'binoculars/search'</b> find to check for account assignment on web gui,i was getting this error "display not possible...inconsistency in input help" error. I di
-
I have an older iMac and I am trying to get an update of iPhoto. Currently I have iPhoto 6.0.6. I thought it would automatically update to the newer versions of iPhoto when I upgraded to OS X? Do I have to purchase this as an extra? iPhoto '11 was
-
Suddenly, a month or so ago, every single time I open a new page, Mozilla opens a pop-up window. Yes, I have clicked on Tools, etc and set my settings to block ALL pop-ups. Yet, Mozilla has decided to circumvent this setting. If this situation is not
-
HI, What is the tcode we have to use to run mrp for consumables. Consumables are not maintained in bill of material but we are using manual reorder point planning vb and entered the reorder point.Whether we have to enter the requirement for each cons
-
Is is possible to open event lists from different tracks at the same time in Logic Pro 9?
Is it possible to open event lists from two difference tracks in an arrangement at the same time in Logic Pro 9? When I switch between tracks the event list swiches as well. Thanks in advance.