N95 - no suitable profile for in car use

Hi. Just got a Sony Car stereo BT2500 with bluetooth. It accepts music streamed from my N95, which works really well - until the power save cuts in. Then the music stops, until I open the slider again. The only way I can stop it is to activate the visualizer, but that is distracting and also I can't see the buttons. What I would like is to be able to set up a 'Car' profile that disables all the power save features (cos it is on charge anyway). Alternatively, just some way of disabling the power save at will would be a workaround. Any ideas anyone?

This is odd. Are you saying that the power save mode doesn't come on when you are streaming music to the headphones, or that it does come on but doesn't interrupt the music?
It seems odd that I can't find a way of having an 'in car' profile that allows me to have the screen permanently lit since the phone is on charge, which would also get round the problem I seem to have of the power save mode interrupting the music streaming. Ideally, I would like to be able to see the phone's screen while in the car anyway, so I don't want it to go dark.

Similar Messages

Can anyone recommend a good bluetooth speaker phone for in car use.

There are so many. most or in between not very good and afwul
can anyone recommend a decent bluetooth speaker phone for the car.
i have a iphone4. Thanks for any advice

Hello, G.E,
Not exactly lighted, but easy to read & glows in the dark, I'm thinking of trying these...
https://www.buyezeyeskeyboard.com/?refcode=ez3

What USB cable for in car use?

I have just received my brand new car & it has a USB dock to plug your Iphone 4 in to use through the Stereo/Screen but have been told it needs to be a particular USB cable for it to work?
Can anyone inform me what USB cable i am actually looking for as a standard USB charging one does not work?
Thanks

What kind of car? I use a stock Apple in my 10' Acura TL and it charges and connects fine.

PD Profile for ESS when using contextual authorizations

Hi all,
We are using contextual authorizations, we have MSS working nicely, and now we are implementing ESS. Does anyone know what the PD profile would look like for the basic generic ESS implementation? The pre-delivered roles have P_ORGIN objects (disabled) so if we change to P_ORGINCON we need a PD profile to populate all the fields. There does not seem to be any pre-delivered PD profile.
Thanks

Hi Teresa,
You are either using structural authorizations or not.
Depending on this decision you have to activate parameters in table T77S0.
When Yes
AUTSW     DFCON     0     HR: Default Position (Context)
AUTSW     INCON     1     HR: Master Data (Context)
AUTSW     NNCON     0     HR:Customer-Specific Authorization Check (Context)
AUTSW     NNNNN     0     HR: Customer-Specific Authorization Check
AUTSW     ORGIN     0     HR: Master Data
AUTSW     ORGPD     1     HR: Structural Authorization Check
AUTSW     ORGXX     0     HR: Master Data - Extended Check
AUTSW     PERNR     1     HR: Master Data - Personnel Number Check
When No
AUTSW     DFCON     0     HR: Default Position (Context)
AUTSW     INCON     0     HR: Master Data (Context)
AUTSW     NNCON     0     HR:Customer-Specific Authorization Check (Context)
AUTSW     NNNNN     0     HR: Customer-Specific Authorization Check
AUTSW     ORGIN     1     HR: Master Data
AUTSW     ORGPD     0     HR: Structural Authorization Check
AUTSW     ORGXX     0     HR: Master Data - Extended Check
AUTSW     PERNR     1     HR: Master Data - Personnel Number Check
If you want to use extended check (check against PA administrator, Time administrator) then you have to mark
AUTSW     ORGXX     1     HR: Master Data - Extended Check
Cheers

Ipod nano settings for in-car use

Hi,
I bought an ipod nano 6 which will permanently plugged into a car.
The connection to the car's radio is by analog aux-in. so interaction with the ipod is minimal
The ipod wakes/powers on together with the car's ignition.
Is there a setting to make the ipod automatically start playing a playlist at power-on?
Conversely, can the ipod be made to shutdown once the power source shuts down = car's ignition turned off.
best regards
glenn

Thank you for your reply.
Hope it counts as a suggestion for a next iteration

Camera RAW v7.3:Lens Profile for Nikkor DX 17-55mm

Hi,
LR v4.3 correctly reads from NEF the lens Metadata like: Nikon AF-S DX Zoom-Nikkor 17-55mm f/2.8G IF-ED. This lens profile is properly assigned to the corresponding NEF file.
Still in LR when converting the same image (via export dialog) to TIF, again this lens profile is used and reflected in the TIF-output (including metadata). So far so good.
When converting the same image in Nikon Capture NX2 of course the lens profile (as set in LR) is NOT reflected in the TIF-output. This (should) can be taken care of by enabling a lens profile correction in LR (after import TIF into LR).
The thing is that LR suggests to apply a profile for lens: Nikon AF-S DX Zoom-Nikkor 14-24mm f/2.8G IF-ED. This profile is probably not the same as for the 17-55mm lens.
Unfortunately a profile for the Nikon AF-S DX Zoom-Nikkor 17-55mm f/2.8G IF-ED is not listed in the selection options.
Question is:
How can I best obtain a proper profile for the lens: Nikon AF-S DX Zoom-Nikkor 17-55mm f/2.8G IF-ED ?
I find it strange that Camera RAW v7.3 has the proper lens profile for the NEF but suggest another profile for the TIF version of the same file. Apparently the profile is available for NEF but not for the TIF.
How comes?
Would appreciate to receive some reasoning and possible solutions.
Thanks, Hans.

My findings:
The lens profile in ACR is for RAW files.
For converted files (TIF, JPG, etc.) a different lens profile applies.
Reason(s): The metadata of the TIF-file is not specific enough about lens profiles. (Lens profiles would need to be embedded - they are not).
For example: Has the TIF-file been converted from RAW using a profile or not? If so, the specific name of the lens profile and it's physical location would be needed.
Meanwhile it makes sense for me that this part is left to the user.
The Adobe LensProfile Creator allows to produce a suitable profile for specific needs.
For many popular lenses there is a non-RAW lensprofile (for TIF, JPG etc.) available that might be applied by the user.
Thanks 'Geoff the kiwi' you lead me onto the right path to find the answers to my questions.

How to alter the default profile for multiple users

I am trying to alter the default profile assigned to users during user creation to a new profile. I know to change the profile for one user using the syntax
alter user abc profile profileabc
The issue I have is that there are 100's of users under default profile and changing for each of them manually would be difficult. The approach that I see is to write a shell script where I connect to the db and get a list of all the users with default profile. Then I loop through the file making connection to the db each time and executing the alter statement.
Please help if you think that there can be a more efficient approach to this.
Thanks

alter user abc profile profileabcspool newsql.sql
select 'ALTER USER '|| USERNAME || ' PROFILE NEWPROFILE;' FROM DBA_USERS;
SPOOL OFF
@newsql.sql

How to fix Workflow failed to get user profile for user:

hi All,
How to fix Workflow failed to get user profile for user when using Lookup function in sharepoint designer?

Try to use “As string” instead of “Login Name” for the “Return field as”.
Regards,
Jayant
jayant prabhakar

Accurate colour profile for Canon 40D?

Hi all,
I have an Canon 40D but unfortunately my colour checker is not compatible with the new DNG Profile Editor (it's a PerfectPix Natural).
Has anyone here made a profile for the 40D using the Gretag colour checker that they'd be happy to share with me? I realise that your 40D may not replicate colours in exactly the same way as my camera, however it's got to be closer than any of my other profile options at the moment.
Thanks in advance,
James
PS... I hope this request isn't inappopriate, the user to user forum for Camera Raw seemed like the best place.

Hi David/Eric,
I understand what you mean about the contrast, however I am comfortable that my images are exposed correctly on the whole. I guess it's just very hard to quantify, and very hard to prove, where my images are not "right" colour wise.
I also realise that white balance plays a major role in this type of subjective comparison... The issue I'm finding is that when I am flicking between profiles for an image there are times I just can't find anything that's right.
Maybe the biggest issue, at least in part, is perception. When analyzing an example image I've seen the following behaviour for each profile:
- Camera Standard is probably best, but while on this example it's okay, in some images it's over-saturated.
- Adobe Standard is close, probably slightly too green.
- ACR 4.4 is up there too, best in some cases but can have issues with skin tones.
- Camera Faithful is next on the list but tends to look flat and lifeless (even though no change other than profile).
- Camera Portrait makes faces too pink and skies too blue. In general it seems to over-saturate.
- Camera Landscape makes faces look pretty good, but skies and landscapes are WAY over saturated.
- Camera Neutral looks relatively good colour wise but has no contrast and looks under saturated.
The problem is, in this one example they've behaved in a certain way. In another example (even one where I've manually white balanced) they'll behave differently... suddenly Camera Standard will look terrible and ACR4.4 will look the best... or Adobe Standard.
I guess the issue is I'm just not confident that LR is reproducing the colours that the camera saw... but only because I don't think the profile is right. Once I know that the profile is right (and whether I'm being silly or not, I would be satisfied that Joe Blog's 40D is going to be almost identical to my 40D) then I'll know that the faces look a little red because I've got my white balance wrong. Right now there are three that are "close" to what I saw, but I'm not confident that any of them are spot on.
I hope this makes sense. I'm not attempting to be difficult, to be honest I figured that the creation of the Profile Editor would lead to a proliferation of downloadable camera profiles that were supposedly "colourmetrically accurate" for each camera... maybe I'm just a little quick on the bandwagon.
Cheers,
James
PS. I realise that colour gamut of the monitor plays into this also, but I am assuming that if I can SEE that the colours are too saturated then I'm not exceeding the gamut... I guess it's possible that my "washed out" profile Camera Faithful is exceeding the gamut and subsequently doesn't look very good?

N95 in-car use - what are Nokia playing at?!

I have for some time been using a Nokia 6680 in my car, using a ck-7w car kit and a cr-27 holder. This works great, I have handsfree calling, I can charge my phone whenever I get in the car by putting it in the cradle & I have tomtom 5 mobile which works great, even muting the radio to give directions etc because it all integrates nicely.
Now Nokia have brought out the N95 and I thought great, satnav and phone in one device. So I have upgraded.
Guess what? Nokia N-series devices are "consumer" devices which don't get a special in-car holder. You what?!
The N95 works fine with the ck-7w using bluetooth, but it doesn't have a pop-port so you can't use the ck7w cable. The only way to use it in the car is with a generic holder and a cigarette lighter charger. There is no custom holder for it. To be honest I would be happy even if all the holder did was charge the phone and hold it - I'm happy with bluetooth connection to the car kit.
This has to be the most brain dead thinking from Nokia I have ever seen. I have been using Nokia phones with car kits since the 2010, 2140, nk702 (6130), 6110, 6210, 6310 & 6680. Like I said, my 6680 has tomtom mobile 5 sat nav installed. But guess what, the N95, a phone with BUILT IN SAT NAV has no in-car charger cradle, so you can't use it neatly in a car?!?!

[quote]Can anyone who has this working explain the process to get a bluetooth connection from the N95 to the CK-7W? I just seem not to be able to pair the two.[/quote]
Hi, I've got this working. I have a holder for the 6680 in place using cable connection as well. Haven't tried to connect them both at the same time, but I guess that's not what you want.
To get this working. In my situation, the carkit when using my 6680 always works. I don't need to have the keys. For the bluetooth connection I do have to have the power on (turn the key until you can play your radio, onboard lights turn on, etc.). After you turn on the power, let your N95 search for a new bluetooth device. In my situation, it found the CK-7W in just a few seconds. Then pair with the device using the 0000 password.Message Edited by jarnodewit on 29-Apr-200702:30 PM
People who say it cannot be done should not interrupt those who are doing it.

How do I use the same profile for two users on the same computer

I use my laptop both at home and at work. And in each venue I use a different user log on. But I wish to have firefox use the same profile for each user log on. How can I get firefox to point to the same profile for each user?

Note that only one user (Firefox instance) can use a profile folder at the time, so if you would switch the Windows user to another account then you would first have to close Firefox.
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
* http://kb.mozillazine.org/Bypassing_the_Profile_Manager

How can I use two "Status profile" for two categories of users?

Hi friends,
I tried to configure two categories of users :
1 - First category (User1) can process the message and access to the standard Status profile (SLFC0001),
2 - The second category (User2) can process the message using another status profile (ZSLFC001).
To do this, i process like following :
1 - I created ZSLFN autorization key by copying of SLFN (Tcode :BS52).
2 - I created the Status Profile "ZSLFC001" by coping the SLFC0001(TCode : CRMBS02).
3 - I suppress some user status (ex : send to sap) and I replace SLFN autorization key by "ZSLFN"
4 - I created Transation type "ZLFN" assigned to ZSLFC001 status profile.
5 - I created a ZSAP_SUPPDESK_PROCESS rôle and I set the ZSLFN as authorization key in "B_USERST_T" and in "B_USERSTAT". This role is affected to the User2
Unfortunately, the User2 see and access to the "Send to SAP" user status. I think that the status profile ZSLFC001 is not used!!!
Tank you for your help,
Samad

Hello Xavier,
I changed the Process Type in DNO_CUST04, and I had a error message : "The system could not create the message because of an RFC connection "NONE " error Message was not created".
Furthermore, The change of process type will affect all users.
I think that there are two possibilities :
- Using process type (SLFN or ZLFN) according to the user processor,
- or using the same process type (SLFN) and according to the processor to load the appropriate "status profile".
Please find below more informations about the role:
- the Manually   Status Management: Set/Delete User Status                    B_USERSTAT
   Activity                  :    01, 06
   Authorization key   :    ZSLFN
   Object Category     :     *
   Status Profile         :    *
Thank you
Best regards
Samad

How to use the same Windows-Profile for over 700 Users?

Dear admins,
i´d like to use one (1!) shared windows profile to serv over 700 user-accounts in our school. But there is a little complication in the WGM.
I just tried to check all users and entered the path of the shared profile right in the windows tab.
For example \\Server\Profiles\oneforallprofile
Unfortunately the WGM put the user´s shortname behind this path.
For example: \\Server\Profiles\oneforallprofile\mistersmith
or \\Server\Profiles\oneforallprofile\sallymiller and so on.
By changing this preference one by one it works, but of course i need a solution to do that for all users.
Does anyone know how to set one Profile for all students?
Thanks for your help!
Rolf
XServe G5 Mac OS X (10.4.5) Educational System Administrator

Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan.

Do I need to set AI colour profiles for use in ID?

My previous set up:
Mac
CS2 (Illustrator, Photoshop, Bridge)
Quark XPress 7
My new set up:
PC (Win 7)
CS5 (Illustrator, Photoshop, Bridge, InDesign)
My problem:
I work for a company that prints newspapers, but my dept also does work for glossy sheetfed printers (magazines leaflets etc)
All my work is exclusively CMYK.
With my previous set up - I didn’t want to have to switch my colour profiles via Bridge as I was constantly juggling two types of jobs:
Our tabloid press - Profile - ISOnewspaper26v4 (CMYK)
Sheetfed Printers - Profile - ISO Coated V2 (Fogra 39) (CMYK)
So I set my CS2 Suite colour settings to ISO Coated V2 (Fogra 39) and set an action in Photoshop to convert jpegs / eps photos to ISOnewspaper26v4.
So my CS2 working space was set for Sheetfed glossy publications and if I wanted to set a picture to the correct profile for newsprint I just had to open the picture and hit the action that applied the ISOnewspaper26v4 profile.
Regarding Quark – I set up separate templates for each type of job:
One for Profile - ISO Coated V2 (Fogra 39) and one for - Profile - ISOnewspaper26v4.
Regarding Illustrator - I found that Quark 7 didn’t differentiate between Illustrator colour profiles, or if it did, it didn’t show up in ‘Usage’.
If I went to Quark Usage and went to ‘Profiles’ it only listed the Quark profile and any Photoshop profiles, not any Illustrator profiles.
So in Illustrator I just set colour profiles to ‘do not colour manage this document’. So that I only had to worry about changing profiles for Photoshop jpegs / eps’s.
So I had a good little system going that served me well and now my company decided to move us to PC’s and CS5; and I still have the same problem – juggling newsprint jobs and glossy magazine jobs and not wanting to have to synchronise my CS suite colour settings every time I switch between jobs...
So I was hoping to stick with my little system on PC / CS5.
So basically my question is, do I need to worry about Illustrator colour profiles if I am bringing Illustrator files into InDesign? (To clarify, my Illustrator files are always pure vector, so there is no chance of some rogue RGB jpeg sneaking through on a Illustrator file)
Im open to suggestions regarding my set up, but really would prefer not to have to keep switching my colour profiles.
Any help would be greatly appreciated.

First, I wasn't suggesting that your PDFs be exported to RGB, but it is a common workflow these days to keep photos in RGB until you convert them to the correct profile during the export process. This maximizes the potential for re-purposing your documents and allows you to use the same RGB photos for different output purposes without having to do separate CMYK conversions for each destination, so long as you don't need to do any tweaking after the conversion.
And to answer your question, if the .ai files have no embedded color profile they will ALWAYS be considered to use whatever the CMYK working space is in your ID file, so the numbers will be preserved. This means that there will be slight differences in color on output on different devices (the whole point of color management, after all, is to preserve the appearance of colors by altering the numbers for the output device).
Does the vector work you get from Thinstock come with an embedded profile? Is there any color that is critical for matching, such as a corporate color (which should be spot, but that's a different discussion), or do you use the same art in both the newspaper and magazine, and does the client expect a match (which we know isn't going to happen anyway)?
If there's no embedded profile when you start, there's no way to know what the color was supposed to look like, so color management is not possible, really. You can assign a profile, but you'd be guessing. Since the correct appearance at that point is unknown continuing with out color management shouldn't present a problem. The only case where you would need to manage the vector art would be if the color APPEARANCE is critical or you need it to match across different outputs, and in that case you would need to assign a profile and allow ID to preserve the profile on import and remap the numbers, which means you would likely get rich blacks someplace. Since it's unlikely that you can get a good match going from glossy to newsprint, I probably wouldn't even try -- you wouldn't want, for example, to tag the art as newsprint, and have it print subdued on the gloss if it would look better or more correct with the other profile. Color management would be much more useful if you were going from sheetfed to web on the same stock.

How to use the selection profile and status profile for production order?

Hi expert,
I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
Please help me.
thanks in advance.
george.shi

Hi George,
There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
In this status profile,
1.We define the sequence in which user statuses can be activated,
2.We define initial statuses
3. Allow or prohibit certain business transactions.
Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
Regards,
Raja.
Edited by: Rajarao on Oct 30, 2008 6:21 AM
Edited by: Rajarao on Oct 30, 2008 6:22 AM

N95 - no suitable profile for in car use

Similar Messages

Maybe you are looking for