N95 - no text appears in web browser

When I connect to the Internet through my N95 WiFi connection, I get the images but not the text on the web pages. Even when I write something (like user name and password) I cannot see what I am writing.
Will be thankful if someone would give me a solution. Thanks.
Solved!
Go to Solution.

i have contacted the developer of Ramadan applications.
The problem is in fonts used in Quran and it was fixed.
Please see the solution below:
Dear Customer,
Thank you for contacting ASGATech support,
After investigation to the browser problem We found that Quran font conflicts with this browser font, so we updated the Quran version and it's available at:
http://mea.nokia.com/english/ramadan
1-Restart your mobile.
2-Uninstall the old version.
3-install the new version.
Thanks and best regards,
ASGATech support team/ Noha

Similar Messages

CR 8.0 pie chart/graph doesn't appear in web browser

Post Author: kevind
CA Forum: Charts and Graphs
Hi,
I am using a CR 8.0 report (containing data in tabular format and Pie/Bar graph) with Web component Server.
In design mode (by entering the parameters) when i view my report through the CR IDE then i can view my report perfectly with the pie and bar graphs.
However,once i call the same report through the web component server, by my JSP page, the report appears with the data but the page containing the piechart/Bar graph doesn't appear. (i am using the ActiveXViewer)
When i remove the chart/graph, then all the pages are displayed in my browser (IE) properly, but if i add back the pie chart then the page on which this should appear - doesnt display.
Has anyone faced a similar issue? In design it displays with data but once called through webcomponent server it fails?
Thanks,
Kevin D

Hello Subramaya,
currently I am working on a small article in the Wiki area of the ITS (Wiki, ITS HowTos): <a href="https://wiki.sdn.sap.com/wiki/display/HOME/UsingSAPGUIforHTMLinsteadofanIAC">Using SAP GUI for HTML instead of an IAC or EWT service</a>.
Also see notes 1010519, "SAP GUI for HTML: Simplified Title Area Without Menu and OK Code" and 959417, "Integrated ITS, Closing Session When Transaction Ends". I am pretty sure that this is exactly what you are looking for.
With best regards,
TJ

Displaying text in local web browser

Hi,
Been looking at a web forwarding program that accepts a GET request from a browser and goes off and gets the page from the remote server and then needs to feed that page back to the browser. I've got as far as getting the page back from the remote site but was wondering how to post it back on the web page.
import java.io.*;
import java.net.*;
public class WebFwd{
    private int fwdPort;
    private ServerSocket listener = null;
    private Socket socket;
    private String remoteURL;
    private int browserPort;
     public WebFwd(int i){ //Constructor to create an instance
          fwdPort = i;
          listenSocket();
     public void listenSocket(){
          try{
                listener = new ServerSocket(fwdPort);
                System.out.println("Server socket up and running on port " + fwdPort);
           catch (IOException e){
                System.out.println("Could not listen on port "+ fwdPort + ".");
                System.exit(-1);
          while(true){
               try{
                    //listener.accept returns a client connection.
                    socket = listener.accept();
                    browserPort = socket.getPort();
                    DataInputStream dis = new DataInputStream(socket.getInputStream());
                    byte [] data = new byte[1024];
                    dis.read(data, 0, data.length); //read in the data from the browser to the socket
                    String byteStr = new String(data); //convert the byte array to a string
                    System.out.println(byteStr.trim()); //print out the contents of the GET request trimming the whitespace
                    parseString(byteStr); //cut up the GET request to obtain destination
               catch (IOException e){
                    System.out.println("Accept failed: "+ fwdPort + ".");
                    System.exit(-1);
      * Get the remote location of web page
     private void parseString(String get){
          String [] getArr = get.split("/");
          String [] getArr2 = getArr[1].split(" ");
          remoteURL = "http://" + getArr2[0];
          forwardRequest();
      * Forwards request to the remote location
     private void forwardRequest(){
          try{
               URL u = new URL(remoteURL); //create a new URL to remote location
               InputStream is = u.openStream(); //open a stream on that url
               //create new dis to read the data from the remote server
               DataInputStream di = new DataInputStream(new BufferedInputStream(is));
               String s;
               //while there is stil something to read, read it
               while ((s = di.readLine()) != null){
                      System.out.println(s); //prints contents of remote URL here
                      //Need to find way of redirecting it to the browser
                       // Send data
                  URL url = new URL("http://localhost:" + browserPort);
                  URLConnection conn = url.openConnection();
                  conn.setDoOutput(true);
                  OutputStreamWriter wr = new OutputStreamWriter(conn.getOutputStream());
                  wr.write(s);
                  wr.flush();
        catch(MalformedURLException mue){
             mue.printStackTrace();
        catch(IOException ioe){
             ioe.printStackTrace();
     public static void main (String args[]){
          WebFwd wbfwd = new WebFwd(30280);
}I keep getting a connection refused exception in the while loop of forwardRequest(). There is obviously a "correct" way to do it but before I start mucking around with my firewall I thought I would check that I'm in the right ballpark.
Kind regards,
Chris

Uh, when your proxy (as a web forwarding program is called) receives a GET request, it should reply with the contents of the URL requested.
So
1) read request from socket
2) obtain URL stream
3) write stream contents back to socket
Catfish?

Which (Text|Terminal)-based Web Browser to use?

So after seeing phrakture's post about w3m + w3mimgdisplay? or something like that, I was wondering what terminal browsers people preferred and why.

I used elinks for a while because it renders html decently. Then I realized "it's a text mode browser, I want it to render how it looks best in text", and that seems to be w3m.
What I like most about w3m is the sane navigation. elinks key navigation used to piss me off. Sure, you could change it, but that's alot to change.
w3m seems to have more "sane defaults" - it's the same reason I like weechat over irssi.
That said, the w3mimgdisplay thing just furthers the "OMG" factor of w3m.
It *does* work within screen too, but not over ssh (yet?). The only problem is that w3m images are positioned with absolute values, and it can't interpret where screen splits are at, so renders on top of other crap.

Copy&paste formatted text from the web

Hello,
I'm from IT department. Employees graphic gave me a difficult task. They need to copy text from the web browser which is underlined, into Illustrator. The problem is that while pasting the text loses it's formatting. I found the solution about pasting the text into MS Word and then import it AI. Unfortunatly they not accept that way, the said "we need something more easy, it's possible, someone told us". Is there any other way to copy text from the web browser to illustrator with keeping format? Maybe plugins? I'm googling about 2 days about it and didn't find any other solution. Please help me.

thank you
unfortunately it's not good solution because:
1.) "omg, too much clicking, we need ctrl+c ctrl+v"
2.) They change the text, change size, color, background etc in AI. When AI imports pdf all letters looks like seperate objects (it's hard to explain for me, because I'm not familiar with AI and my english is not good enough)

N95 web browser problem

Hi,
when i use the web browser there is No text visible in the web browser and numbers in opened pages only i can see lins and pics any sone text icons but no text itself.
pls i need help....tank you
Solved!
Go to Solution.

Hi Cjlim, i was reading about this problem with the N95 default browser and i have a problem when i try to open the next link http://maps.google.com/maps?f=q&ie=UTF8&om=1&q=-25.28637,-57.64720166666667
With the default N95 8G broser i this site does't exist, but if i use Opera Mini it works fine. The problem is that that link i received in a SMS and when i try to open it ALWAYS de default N95 broser runs........
The firmaware version of N95 8G is v 1.2.011
Do you have some idea??
Thanks in advance

Web browser zoom and text size

Has anyone figured out how to respect requests by the user from the web browser to zoom or change text size? I tried it on Adobe's home page and it seems to work for the most part, so I know it's possible, but I don't know a not too painful way of implementing this in Flex. You'd have to use the ExternalInterface to register some Javascript functions that captured the correct events and passed in the zoom or text size then change that in your Flex app as appropriate, which would take a bit of work. I'm always looking for the shortcut on everything. So if anyone knows of a widget or settings, etc. that would help in this respect, I'd appreciate it. Thanks.

See [[Toolbars and page content appear too large after upgrading to Firefox 3]]
*Try to adjust the DPI setting, see http://kb.mozillazine.org/layout.css.dpi
*Try to set the pref layout.css.devPixelsPerPx to 2 on the about:config page.
To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
If you see a warning then you can confirm that you want to access that page.
If you need to increase (or decrease) the font size on websites then look at:
Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
NoSquint - https://addons.mozilla.org/firefox/addon/2592

Browser text/appearance stretched

I just ran the most recent wireless upgrade, and now any text in the BlackBerry browser appears elongated or stretched vertically...it's a subtle difference but enough to throw me off. I've tried changing the font and size, as well as alternating between page and column views, but no difference. Any ideas how I can get it looking normal again? Please? Thank you!!

Try doing a spotlight search for all files that start with AdobeFnt. They will be named AdobefntXX.lst, with the XX being some number. They will be scattered across the drive... After making sure that all Adobe applications are closed, trash all the adobefntxx.lst files, those with the 3 letter extension .lst.
Then, restart the system, and open the files in Acrobat again.
Otherwise, what happens in Safe boot? (Remember, Safe boot loads only a default set of fonts.) If they display fine there, the problem most likely is a font issue, one of the fonts that Adobe installed.
Check Adobe's web support page for troubleshooting Fonts.
- or -
Contact Adobe about the whole issue, it is after all, Adobe Acrobat... Adobe's contact number is 800 833 6687.

I turn on my computer, click on the Firefox icon on my desktop, the web browser appears but the same screen always appears and says, "Well this is embarrassing" and says the problem is due to a previously opened tab.

I am online everyday. I turn on my computer and click on the Firefox icon. A web browser appears but not with my Yahoo! homepage. Instead of seeing my Yahoo! homepage I see a screen that says, "Well this is embarrassing." I read that the problem is due to a recently opened tab. It gives me the options of either restoring all previously used tabs from the last time of use or starting a new session. If I choose to restore previous tabs, I am further given the option to select which tabs I want restored and which ones I don't want to restore. I always choose to start a new session because all previous tabs consist of work that I have completed in the past (whether it be yesterday or the day before). I, therefore, have no interest in restoring a tab that contained an article about our current economic situation for example. As previously stated, I choose to start a new session every time I receive the "Well this is embarrassing" error message. When I choose this option, I am brought to a fresh tab with no information regarding work, articles, or entertainment from yesterday or some time in the past. I wish to have an explanation as to why this happens. I do not go on any malicious web sites or anything of the sort. This happens every single day. The automatic error message that appears is "Well this is embarrassing." For Firefox to say "Well this is embarrassing" is not close to the response it should give.

This can be a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
See:
* http://kb.mozillazine.org/Session_Restore
See also:
* http://kb.mozillazine.org/Firefox_crashes
* [[Firefox crashes]]

Emails sent through Mail 7.0 on Mac won't appear in the Sent folder in the Yahoo web browser or the Mail app for iPad.

It seems that emails I send via Mail on my mac are stored only in Mail's Sent folder. These emails don't appear in the sent folder of Yahoo web browser, iPad Mail app, or the Y! Mail android app..
I've tested to see whether my emails are actually sending properly, and they are. I just want to know why the Sent messages on my mac aren't appearing anywhere else. I've read similar issues to this but haven't yet found a reason or solution.
Thanks in advance

[edit] I dragged the email I sent through the MBP Mail app (under MAILBOXES > Sent > Yahoo!) to the highlighted Sent folder (YAHOO! > Sent), and now it shows up on all Yahoo Sent folders (iPad app, web browser, phone app). Not entirely solved the issue but will use web browser to sent future emails to keep everything in sync.

Dynamic text not loading properly in web browser

Please help - I have a dynamic text field in a movieclip
inside a main movieclip - Loading works well within Flash and
GoLive but once I load the file to the web browser the dynamic text
no longer display - It loads undefined in the text box. However
when I remove the movieclip from main movieclip text display no
problem in browser.

make sure to 'embed' the font, into the textField instance.
select the instance on the Stage, look in the properties panel, and
click the 'embed' button, skipping 'all' select the next four
listings, and hit enter.

Text shifting out of alignment when previewed in Muse or in web browser

Hi,
I am having issues with some title text not staying where I want it to. Here are some images: http://imgur.com/a/ZX6z9
The first image shows how I have the page set up in the planner. The text in question is the title "Art Portfolio". If you look at the other two images, the second one being Muse's preview function and the third being in Safari, you will see that the title has shifted down a little in relation to the rest of the site. It is easily noticed because it throws the title out of alignment with the menu.
Anyone have any idea how to resolve this issue? I can compensate by moving it a bit higher in the planner, but I would very much prefer that the software worked as intended rather than me having to intervene.
Thanks for any help!
Andrew Bennett

Hi Thrfoot,
I have a similar text issue with resizing occurring in preview and live mode. I believe text boxes (unlike web pages) are responsive to browser width. Just for grins, try keeping your Orbitron font and making the text box slightly wider and see if that helps. It may not, but I had to jiggle mine about quite a bit to keep it in line with everything else.
Cheers,
Kellie

How do I get the little web browser hand to appear over my b

Hopefully this is an easy answer....
I have just uploaded my new website and noticed that when you
place the cursor over my image buttons that have "onClick - Open
Browser" behavior tags on them, the little web browser hand doesn't
show up. You know, the one that tells you something is a link? I'm
afraid people won't know that the images are buttons unless the
hand shows up. Any idea on how to make the hand appear? Any advice
would be great. Please keep in mind that I'm only a intermediate
level web designer. Here's my website:
http://vintagebycrystal.com/Pages/Holidays/Fourth%20of%20July/Main.html
Thanks!
-Crystal

Oh, heck. Sorry about that.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"E Michael Brandt" <[email protected]> wrote
in message
news:[email protected]...
> Jackeltree wrote:
>> Hmmm...I've downloaded the Divahtml web tools. But I
have no idea what
>> to do next. The help is not helpful and their
website is confusing...
>
> Jackeltree - I would love to hear from you off-group to
see how I can
> improve my site so it is clearer to you.
>
> I also need to point out that divaFreeTools will not
actually help the
> problem you have! Murray was referring to the Tool that
converts "#"
> links to the image url for you, but that is only if
there IS a link to
> start with. Since you applied the DW Open Browser Window
behavior to the
> IMAGE instead of to an <A> tag around the image,
there is NO link, hence
> the Tool can not help you.
>
> To get the hand cursor, you must move your onclick event
to an <a> tag. In
> DW versions EXCEPT CS3, you can simply select each image
in Design View,
> then click on the OpenBrWindow behavior in the Behavior
window, and then
> in the dropdown there, change the event from "onclick"
to "onclick <A>" or
> "(onclick)" depending on which DW you have.
>
> DWCS3 has a bug, so this will not work. You'll have to
remove the
> behavior by clicking the minus (-) icon in the behavior
window, then add a
> link to the image (the link itself can be "#" at this
point) using the
> Property Inspector, then select the <a> tag (on
the Tag Selector bar) that
> has been added for you and in the Behaviors Window add
the OpenBrWindow
> behavior to it.
>
> Then you can run my divaFreeTools script to convert the
link from "#" to
> the url to the fullsize image, which is a better link to
use.
>
> (<plug> An alternative is not to use the DW Open
Browser Window, which had
> to be added to each image one at a time, but instead,
after removing those
> behaviors from your images, create a link - using the
Property Inspector -
> to the fullsize image itself (rather than a link to "#"
or to
> "javascript:;". And then add my divaPOPgold (which does
cost a few $) to
> your page once. It will handle all the popup windows
automatically for
> you. </plug>)
>
> And again, please do contact me so I can improve the
help for
> divaFreeTools on my site. Contact me at michael at the
divahtml.com
> address.
>
> --
>
>
> E. Michael Brandt
>
> www.divahtml.com
>
www.divahtml.com/products/scripts_dreamweaver_extensions.php
> Standards-compliant scripts and Dreamweaver Extensions
>
> www.valleywebdesigns.com/vwd_Vdw.asp
> JustSo PictureWindow
> JustSo PhotoAlbum, et alia
>
> --

Why does my text appear small in Private Browsing?

Ever since I have d/loaded FF4 and gone into Private Browsing to read some forums the text appears really small. I'll adjust it but every time I go to a new page the text shrinks again. I didn't have this problem with the previous FF. What gives?

I too am having this same problem. I'm using the same font, same color, same size throughout my site. And for some reason a good majority of the instances appear bold after i publish. What's even stranger is that some of them look perfect.
Very, very strange.
I may just go back and redo the entire site in a different font and see if that makes things better.

N95 full screen web browsing - wide mode?

N95 web browser seems to work ok in full screen normal mode but when I rotate screen to wide mode there are information areas left to screen both to top and botton. Any idea how to get true full screen browsing in wide mode?
Nokia faitful: 6110, 3650, 7610, 6680, N95, N97, N900, ...

Seems like full-screen mode in landscape is not quite as full-screen in portrait. I suspect there's nothing you can do about it (Nokia would have to modify the browser).

N95 - no text appears in web browser

Similar Messages

Maybe you are looking for