N95 Packet Data log duration won't clear

I would like to know if anyone else has experienced a fault that I have with my N95 8G running the latest version of software.
The fault is around the Packet Data log.
I want to be able to keep tabs on my daily data usage, so have set the log duration to 1 day. When I check the packet data counters the following day, they have not reset. I have left the counter running for 7 days now and they still haven't reset.
Maybe I don't understand this feature, but I was expecting the counters to reset after 1 day.
Nokia support have sent out their standard 'we have no idea wants wrong' email requesting me to return the phone back to factory setting and loose all my data, which I'm reluctant to do.
Cheers,
Paul

The "keep logs for" feature does not affect the counters.
All it does is keep individual events for the specified duration.
Enter the "logs" application and then scroll right. You'll see a list of logged events (calls, messages in/out, packet data usage etc). THESE are the entries kept for one day with your settings.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

Belle: No WLAN and Packet Data log.Filter options ...

In Nokia N8, with Symbian Anna, WLAN and Packet Data logging wasn't possible, even though there were options in the log filtering settings.
See below:
http://i44.tinypic.com/9kxbfa.png
After updating to Belle, log isn't still working, and both WLAN and Packet Data options were removed from filter options.
http://tinypic.com/r/6dxwgg/5
Will it be implemented in a further time?
Best Regards

Hi,
quick update on this one as we now have a FAQ online.
Q: How can I get a WLAN/Wifi and packet data filter with Nokia Belle?
A: There is no data filter included in Nokia Belle by default, but you can download specific apps from Nokia Store.
BR,
yvonne

Clarification on packet data log

I understand the Packet Data logs can remember upto last 30 days. What I don't
understand is are they rotating logs or do they reset to zero every 30 days. To take
an example: if I use exactly 1MB every day and my log setting is set to 30 days. After
40 days ...
- with rotating logs, I'll see 30 MB usage
- with reset-to-zero logs, I'll see 10 MB usage
So which one is it ? I'm using C5-00 on 032.010 if that matters. Thanks.

k

N95:Packet Data connection active???

For heavens sake! how do you turn off Packet Data Connection? so I can clear the log counter.. Or is there a way to turn off your access point so you can edit? Or can I just disable internet access? Or do I need to use the dark side of the force, and risk enternal damnation in the afterlife? Message Edited by bigbad on 18-Sep-200709:59 PM

Phew! Cracked it at last. Many thanks to you and others for your efforts in trying to solve the problem with the N95 handset.
In my particular case, the problem was the 'Orange' Camera Application which is easily disabled via the appropriate setting if you can locate that. It seems to log onto a packet data connection every 15 mins or so. Presumably, this is in order to check whether there are any image files to upload/download from/to the handset from an Orange Photo Album etc. The handset camera works perfectly well without this application which merely provides a short cut to other Orange services connected with photography which I and no doubt others could manage without.
This is not an obvious solution although it is indeed caused by non Nokia application software as has been suggested - but presumable approved by Nokia in conjunction with Orange. They seemed to be unaware of this causing a problem, no doubt because many other applications might do likewise and many contracts include these auto connection charges. I hope this information is useful to you. Thank you for your efforts in trying to establish the cause of the problem. This is not entirely all my own work since somewhere on the web the camera was mentioned but I couldn't see the relevance at the time nor what to do with it.
So, if you still have this problem and have disabled all the likely applications that might be going on line every 15 mins or so ... then the answer is to disable the Orange Camera Application. The camera itself will work just fine but if you wish to upload to an Orange photo album etc, you might have to reconnect/enable the Camera Application as and when required.

N95 packet data

having recently accuired the n95,advertised as what computers have become,i browsed the net and had a quick look at the maps , off the memory card an 02 feature preinstalled maps uk only, bearing in mind i have only had the phone 7 days when i looked at the packet data recieved i was shocked to see the figure 24 mb (02 charge £3 a mb) so with browsing only i am set to pay a wopping £75 , extortion is to kind , its more like **bleep**, or am i barking up the wrong tree?

the maps on my n95 are included with the phone .The problem is ,everytime this phone connects to the internet it has to down load the data which costs £3/mb billed by the information the site your viewing not how long you look,so a site with a lot of pictures costs a lot to browse, i have found this very misleading ,anyone thinking of getting this phone beware of this ,because nobody tells you , don`t know if the maps work the same way yet , i got a 1mb card with uk maps free but it still connects to gprs when you select maps from menu so have i got a open connection that i`m getting billed for whilst using the maps? if so i think i`ll get a taxi ,might be cheaper.

Date Scrolling Info won't clear

I just installed iPhoto 7.02 on my Macbook. When I scroll through thumbnails a black overlay with the date appears. I assume this is the "scrolling information." However, it refuses to go away. It remains over the center of the photo in all the modes I tried, editing, full screen viewing, even slide shows.
Once it appears it seems to get stuck.
Is there a way to make it go away?
If I choose to not show scrolling info in my preferences, then relaunch iPhoto, it does not appear. Is that the only alternative? It would be useful to have it there, but not if it always blocks the image.
I did try trashing iphoto prefs, but that didn't help.

Will:
Delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder. Then launch iPhoto and reset the preferences.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

N95 WLAN Browsing Costs and Packet Data

I have recently purchased an N95 and am accessing the Internet via my home Wireless Network provided by Virgin Media instead of using the standard Access Point provided by the Mobile Operator i.e. Orange Internet - by doing this, I assume I would incurr no charges from Orange when surfing the Internet as I am using my own Broadband connection?
A seperate question, but related, how does the Packet Data transfer work? My default Access Point for this is Orange Internet, is this a different thing to the WLAN Access Point i.e. my Home Network or is is related? Does the Packet Data work when I'm connected to the Internet or is it mainly for messaging etc? Should I change the default Access Point for this to my Home Network or leave it as it is i.e. Orange Internet?

Hi sj219706
In answer to your first question, there are no further costs incurred using WLAN with your Virgin Media Broadband connection.
With regards your second question it depends a little upon how generous your GPRS = General Packet Radio Service data allowance with Orange is.
Can I use Nokia Maps application as an example? Unless disabled an active network connection is needed, this may either be through GPRS(Orange) or WLAN(Virgin Media). If you are within range of your WLAN this is your preferred access point.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Capture packet / ip logging

What is the best way to capture packets as well as display them for signatures.
I need to see the packets that cuase the ICMP hard DoS sig 2157 to fire. From the Cisco IDS Install and Configuration guide version 4.x it talks about enabling packet capture to true as well as Event action, but no clear instructions on which to use or if both need to be configured.

If you want to capture the packets that caused the signature to fire, then you must enable the "log" option as the EventAction in the signature. When the IDS detects an attack based on this signature, it creates an IP log.
There is also an "IP logging" feature in the IDS that is used to capture the packets for a duration of time. This capture is time or size (bytes) based and is not based on signature.

N80 & Orange packet data

I wonder if anyone else has had the same experience as I've had, I was just playing with my Orange N80 and when I looked in the log file I found the data counter had registered all sent data as 3.05MB and all received data as 4.72MB and all I'd done was look on Orange world a few times and checked out the sport on BBC mobile - which I know is very economical on data, however when I first got the phone I was trying out the camera and didn't realise that my pictures were being uploaded to Orange until I turned off the album feature but there weren't many photo's anyway but at £1. or so a MB this could get very expensive! I called Orange who, whilst being very polite, couldn't help very much other than to advise me to check my next bill and reset the data counter and compare the following bill! Anyway, I've since turned off just about everything as Orange seem to set all connections to a default setting of always on and I now get prompted for any connection other than for calls and sms which has the added bonus of increased battery life - not much mind but still better. Now call me cynical if you will but how many people will run up huge data bills before they realise they need to change the default settings to off which,imho, should the case anyway. Since turning off the packet data, online album etc though, I experience less problems with the handset too!

Just mention my findings on this
I too myself have seen a high amount of data being classed as transmitted via orangeinternet even though I have my accesspoint set to my home network, set the connection to only when needed and also changed the softkey menu so now says camera instead of home.
I rang orange about this and advised I was not happy the phone stated I had transfered 3mb of data in less than 2 days of using the phone, and that I don't use their webpages and if checked previous bills they would know this. I have been told that so far no data is being shown as being used, and when get my bill it will be looked into then if I am charged for anything.
Incase you may not know if you dont have the internet package you will be charged £10 per mb from orange.
I think I have now found out what the problem is, if you connect the data cable to the pc it will go into offline mode and you can transfer whatever you want. The minute you unplug the cable you go back into online mode and the orangeinternet automatically connects and whatever you have transfered by cable gets added to the orangeinternet connection.
Hopefully when get bill I should be able to dispute any charges for this, especially as I've phoned them about it.
regards
walkerx

Which is the best structure for start/stop data logging?

Hi everybody,
hope I can explain my problem good enough that anyone can help me:
I have a VI which continuely shows on a graph the voltage of a Analog Input of a DAQ device. Now I want to allow the user to start/stop with a click on a button data logging. Means that a second loop writes to a selected path every ms the data to a spreadsheet file.
At the moment my VI works like this:
You run the VI and Labview asks you one time for the file path, then you can start and stop the data logging. But you can do it only one time. If you want to log a certain time later another file, you have to close and open the whole VI again which is not very professional...
My target is:
It is onlyl necessary to start the VI one time. Then you can select a new file path, log data, select another file path, logging data again....and so on...
Which programm structure is necessary, can anyone help me as a labview beginner with that issue? I attached the VI if someone just wants to edit that...
Thank you for your help!! Markus
Attachments:
Logging voltage.vi ‏93 KB
screenshot.JPG ‏98 KB

@NaruF1 and GerdW
you are right, there is a mistake, both loop rates should be the same (10 ms) :-)
@NaruF1
yes you understood correctly that the file dialog should appear every time the user wants to start writing a new log-file. The voltage we measure is a analog signal, so there will be several interesting periods we want to save for a later analysis in Excel.
To your 2nd point: if it works with a array it will be fine. But it must be possible to log data for lets say 5 minutes, so the array won´t be too large? (5 min @ 10 ms loop rate will be 30000 rows..
attached is the VI, saved as LV2009..
Thanx a lot!
@GerdW
..you ask why I didn´t create a structure like you recommended with notifiers or queues? The simple answer would be that I am not familiar with all this.. just began to write my first Labview programm. I will have al look to the LV help with all that stuff... Thank you a lot
Attachments:
Logging voltage.vi ‏80 KB

The packet data and wlan connection runs automatia...

guys guys guys i'm having a wiered problem with this rubish E72
well every time i check my log i find that my phone has used packet data connections and wlan connections for small time intervals and small periods while i haven't used the internet for a long time btw i always make sure to exit all app and also make sure to disconnect my email before exiting so packet data signals and wlan signal are not (on)
so that means that the phone just uses internet by it's own self also notice that the time that the phone used the internet was during my sleep time
but it's so weired it has used the packet data for 30 seconds and the wlan fo 1.5 mins by it self ..............is this a virus or that ugly firmware is just full of **bleep**
please check your phones (log) and reply me back
thank you
Nokia E72-1 Black
firmware : 053.001
of 26 of nov 2010

well for the ovi sync i really use that app to sync my contacts and calender and it set to manual sync so i guess it wouldn't go by it self
as for the wlan data and packet data , last night was ok withou any connection don't know how
or what happened it seems the problem is solved but i will also make sure tonight of the problem still exist or not
all i did last night i have installed 2 app (m.gaurd(netqin) and kaspersky antivirus) to scan my mobile and it did but it seems that its slowind down my already slow mobile
and removed them today because they corrupted the interface of my snaptu application which i use for facebook (the highlight color disappeared but it was still working) so i had to uninstall it and reinstall back again
Nokia E72-1 Black
firmware : 053.001
of 26 of nov 2010

Data Log File Refnum Type Def Bug??

Hello,
I just found some quirky behaviour (LV 7.1.1):
1. In the attached LLB, open "RefnumVI.vi"
2. Select the Data Log File Refnum control and open it for editing (Edit - Customize Control ... from the menu)
3. Close "RefnumVI.vi" but leave "Refnum.ctl" open
4. Select the enum inside the refnum container, and open it
5. Select File - Save As ... and save the enum as "RefnumEnum2.ctl"
6. Close the enum
7. Save "Refnum.ctl", and close it
8. Reopen "RefnumVI.vi" and display its hierarchy (Browse - Show VI Hierarchy from the menu)
Notice that "RefnumVI.vi" still has a link to "RefnumEnum.ctl", even though we saved this as "RefnumEnum2.ctl" earlier.
If you go back to the VI, right click on the refnum, and replace it with itself (i.e. select "Refnum.ctl"), the link disappears.
This behaviour does not happen if I use a Cluster instead of a Data Log File Refnum. I imagine the difference is that the calling VI needs to know about the structure of the data log file in ways it doesn't need to know about the structure of a cluster, but this still is very counter-intuitive behaviour. Is this really expected? Or is it a bug? Is there any other way to remove the link?
Cheers,
Jaegen
Attachments:
RefnumEnumBug.llb ‏22 KB

Nathan,
Thanks for your response - I have 8.2 and am in the process of evaluating how/when to upgrade.
Does this mean that the compiler/linker is behaving differently depending on where you open a type def from? The reason I'm asking is that I've seen similar behavior when editing a hierarchy of type defs; depending on how I open the low-level type def I'm actually editing, changes will or won't get propagated to other instances properly.
Regarding this actual problem, the issue I had is that the data log file refnum type def exists on many VIs, and thus the incorrect link now exists on many VIs, and I don't see any way of correcting the problem without manually replacing the type def with itself in every location (given there's no "Replace All" feature in LV 7.1.1 ). However, the hierarchy I'm dealing with was only created for testing, so I don't actually need to fix it . I'll just know to avoid causing this problem in the first place in the future.
Jaegen

N97 mini message "packet data: packet data connect...

hi
I got a new nokia N97 mini a couple of months ago, it's on a plan with optus, and it's been working fine until a few days ago it keeps flashing this message 'packet data: packet data connection not available' and it won't let me access the web, or even send messages I've tried resetting it but no luck please help me!

Contact you Operater to confirm that the Packet Data Plan isn't deactivated.. If its active..request them to send the settings once again.. Normally these are sent thru' SMS.. When you receive..first delete all the access points from your phone.. then open the SMS and select..'SAVE'..Now try..
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

PO release workitem won't clear - 'Check FM ends with exception'

Hi all,
I've got a workflow with multiple approval steps even after all steps in the PO complete successfully, i have one work item in the middle of the approval process that won't clear and the event log shows 'Check FM ends with exception' even though the PO is released successfully.
i've got the BUS2012 RELEASED event set as a terminating even to task TS20000166 as standard but i think the release code might not be getting received correctly. How can i debug this or fix it?
Regards
Amir

Hi Kjetil
Unfortunately it is not a customer function. ME_REL_CHECK_EVENT_PARAM is a SAP standard Check Function and has trapped me before. Basically it checks the workitem container (before image if you like) against the event container. (see Below)
Get the release code from the workitem container.
swc_get_element wi_container 'RELEASECODE' wi_release_code.
if sy-subrc ne 0.
    raise container_error.
endif.
Get the release code from the event container.
swc_get_element event_container 'RELEASECODE' evt_release_code.
if sy-subrc ne 0.
    raise container_error.
endif.
Compare the two release codes; if not equal: raise exception.
   if wi_release_code ne evt_release_code.
     raise release_codes_different.
   endif.
Weird, huh.
Regards
Gareth

How to delete Diagnostic & Usage Data logs?

Is there a way to delete the diagnostics and usage data from the iPhone 4S? If so, I don't see it. Seems to me that if these diagnostics and crash logs just continue loading without being deleted, they'd eventually eat up memory? I have it set to NOT automatically send to Apple, since that probably uses up more battery power.
Even after sync the iPhone with the iTunes, the logs are still there!
Does anyone know if Apple is trying to fix this or provide users some information about what's going on here?

just plug in the iphone to your computer that you have used to set up the iphone or ipod touch to clear the Diagnostic & user data logs. Also make sure you fix why the app crashed either by calling the app maker or email the maker of the app to tell them about it or delete the app because other wise this will eat up battery power on your Iphone.

N95 Packet Data log duration won't clear

Similar Messages

Maybe you are looking for