N95 - Problem after flashing F/W No 12.0.013

Hello,
After flashing F/W 12 to my N95 / (RM-159 07.01) through Nokia Software Updater, I found that the phone was loaded with a different set of available languages. As a result, Greek language was no more available.
Before the update, the phone was operating with 'Automatic' menu language (resulting to Greek) and English writing language. It's an unbranded model.
Note: A month ago, I had upgraded another (unbranded) N95 with no problem (Greek language was existing also after the ugrade). However it had different settings: Menu in English and Writing in English.
Can anybody help to recover the lost set of languages in the last N95?
Thank you

Very strange.
I would suggest that you contact your network and tell them that your sim isn't working properly but don't tell them what caused it (so they can't blame it on you).
They should replace your sim free of charge as it's not your fault.

Similar Messages

  • Sound Problems after Flash 11.3 Update

    This reply is to the post by Ortho_Fan, number 28, which references a Firefox forum and "Firefox Hates New Update." This thread is specifically about problems that Flash 11.3 is causing with Firefox but the problem isn't with Firefox, it is with Flash Player 11.3. 
    I have no sound with Firefox, Chrome or Safari.  I do have sound with IE9 but some people do not.
    See these and probably other threads:
    No sound in flash
    http://forums.adobe.com/message/4483563?tstart=0
    Problem with sound after update
    http://forums.adobe.com/message/4483038

    I've branched this discussion into it's own thread, because the issue you're describing is different than the issue from the previous thread, which was related to a specific crash instance.  We'd like to keep the threads focused on particular issues to help both investigate and collate the information coming in, and to aid in discovery for people that are experiencing similar issues.  A single thread with a dozen issues is far less useful in either regard.
    For the sound issue you're experiencing, I would recommend that you follow the advice in the threads you've referenced above.
    Flash Player 11.3 included new sound enhancments to facilitate support for low-latency audio, to facilitate more repsonsive sound in complex Flash games.  While we try to test a wide array of hardware, and conduct months of beta testing, it's impossible to hit every device, OS, browser and driver combination.
    Please ensure that you have the lastet drivers installed for your sound card/chipset.  If the problem persists, please post details of your configuration to that forum thread so that we can track down that hardware/driver combo and investigate the problem. 
    As a workaround, you may wish to roll back to Flash Player 10.3, until a new version is available.  Flash Player 10.3 contains up-to-date security patches (we maintain one major version back for Enterprise), and will revert the sound change that is causing problems for you.
    http://www.adobe.com/support/flashplayer/downloads.html
    Thanks!

  • K7N2 Delta problem after flashing from 5.0 to 5.3

    I was using my K7N2 Delta nicely but after flashing the BIOS from 5.0 to 5.3 in LiveUpdate3 (all OK) and then when LiveUpdate ask to reboot... GOOD BYE!
    When bootin the D-lights show that I have a processor damaged or not intalled properly (two red light up, and two green down...).
    My processor is an Old Tbird 1.2 Ghz with 100FSB.
    The question is: Why the mother stops recognicing the processor if before flashing BIOS worked nicely?.
    J10 and J11 jumpers:
    When I opened case to check out, I had the green J10 and J11 jumpers closed in the mother. The J10 was in safe mode, and the J11 jumper was closed...(133FSB-166FSB??).
    I only have another athlon 1.1 ghz FSB100 processor to test the mobo, but I don´t want to take the risk of burn that one two (if is that the problem, of course).
    So... I want to know how can I reflash the bios back (I have the old BIOS in a backup floppy disk, of course)... or if anyone else have the same problem as me....
    Thanx a lot guys, and please help me... I´m very sad by now... because I don´t know how to get my computer to work.
    Jose.
    (from Argentina)

    Garry,
    Just add
    group.Administrators=system
    in your filerealm.properties file to login into console.
    Hope it helps,
    -satya
    garry payten wrote:
    I am migrating from 5.1 to 7.0 on Solaris. I was able to run the conversion of the weblogic.properties file to config.xml, I was also able to start the new admin server, but I was not able to log in to the console. I get the following error:
    Authentication Denied
    The username or password has been refused by WebLogic Server. Please try again.
    I verified that the WL_USER and WL_PW were correctly set in the startscript and that the system password was set in the config.xml. Any hints? Thanks

  • [msi k8t neo]problem after flashing to 2.20

    hello
    i have a MS-6702 (K8T Neo-FIS2R) motherboard and after flashing my bios it shows my ddr400 ram as ddr 333
    here is my system config:
    athlon 64 2800+
    2x256 ddr 400
    1x80gb and 1x120gb sata seagate hdd
    ati radeon 9600xt
    win xp sp1
    also please could you tell me if i could use the ddr 533 sticks with my config....
    thank you

    thanks...
    but i think its because the ddrs were made by  2 diff manuf. and the new bios reports the cas lwrong for both both are actually 2.5 but it shows 2.5 for one and 3 for the other....dont know why thuis happened...and cpu-z shows one clocked at 166.7 and the other at 200......
    also the ddr 533s would not be able to give their full potential in my config?...
    as i am planning to get new ddrs as i have to give these to my bro...

  • Problems after flashing msi845pe bios version 3.8

    hi
    i am difficulty after flashing the version 3.8 of the latest bios for msi
    845pe max
    i was not able to detect my Creative 5.1 sound card , a pci card
    pls help

    Problems here with verson 3.8 also.
    Flashed to version 3.8 and lost both sound and modem (both PCI cards).
    Sound card is Creative SoundBlaster 5.1.  On-board sound already disabled.
    Flashed back to version 3.7 and everything works again.

  • Firefox and Adobe problems after Flash update last night

    OK, this is a non-Apple question, but I haven't found any solution yet.
    Everyone knows that to run the "Adobe Acrobat NPAPI Plug-in, Version 10.1.3" in Firefox, you had to open in 32-bit mode. I did and that plug-in, plus the "Adobe Acrobat Create PDF 1.2" extension worked just fine running Firefox 12. Tonight I got notification that I needed to update Adobe Flash Player. I did (quitting and restarting Firefox after the installation).
    THEN up popped a warning - Firefox suggesting that I disable the NPAPI plug-in and finding out here that Firefox was disabling the plug-in. So I disabled it, restarted, etc. Then I found that the Create PDF plug-in would crash if I tried to save a web page as PDF within Firefox.
    Is there any way to go BACK to the older Flash plug-in? That seems to be at the root of my problem. I can use PDF Browser plug-in in Firefox to display PDF files but what I really need is the Create PDF extension back (it's strangely absent from Safari - at least I've not been able to find it).
    Any help out there?
    Thanks,
    Clinton

    clintonfrombirmingham wrote:
    petermac87 wrote:
    clintonfrombirmingham wrote:
    but what I really need is the Create PDF extension back (it's strangely absent from Safari - at least I've not been able to find it).
    Create PDF or save as PDF?
    Pete
    Pete,
    I can always use the PDF creator "Save as Adobe PDF" that is available from the Print menu and added by Acrobat Pro X, but it does not always save the hyperlinks correctly, etc., where the Adobe Create PDF does a fantastic job... I'd just like to have it back. It does not show up in the Safari extensions/add-ons for some reason.
    Thanks for getting back so quickly!
    Clinton
    Then you may well have to go to the Mozilla Forums on this one. As I say, I steer clear of Firefox because of all it's bulky extentions.
    Good Luck
    Pete

  • IPod problems after Flashing with 1.1.1

    I downloaded and flashed my iPod with the 1.1.1 updater and went as far as to completey wipe the iPod and reload everything. I did this and the iPod has been working fine. Well I got some new songs the other day and went to plug the iPod into the USB port. The computer proceded to ding several times as if I had plugged in then uplugged the device several times. While this was happening the iPod would go from "Do Not Dissconect" to the main menu and back, until finally it stops at "Do Not Disconnect". The computer never recognizes the iPod and finally I have to disonnect the iPod, I know that's bad.
    After that the iPod will either be stuck in "Do Not Disconnect" until it dies or will "seem" fine for a while but freeze doing something until it dies. I also noticed in one instance it seemed fine, but I noticed that the Play/Stop/Pause icon in the top left of the screen was not there. It finally froze playing a video and I had to wait until it died.
    Incidentaly, if I do wait untill it dies, it really does reset and works fine, I can even charge it with the car charger. Also, this happens no matter which of my 4 computers I try to use.
    I would just re-flash it with the origional firmware, but I won't be able to do that untill I can get a computer to recognize the iPod.

    Try backdating to iPod Updater 2006-01-10 (1.1 for Nano) and restoring with that updater. If you're having problems getting the iPod to be recognized by the updater, put it into disk mode first.
    http://www.apple.com/support/downloads/ipodupdater20060110.html
    http://docs.info.apple.com/article.html?artnum=93651
    The next iPod Updater should be coming out soon, which will fix all of the problems everyone seems to be having with their nano's and 1.1.1.
    CG

  • Problems after Flash Player update

    Hi,
    i am writing because i have some strange sensations in my
    application after i updated my flash player to version 9,0,115,0.
    this is the problem:
    i have a dynamic textfield with htmlt text, in this html text
    i have some img-tags which i use to add Sprites into the htmltext
    that have some kind of user interactivity (rollover, click...).
    until now everything worked fine, just with the update i have
    the problem that i lost the interactivity to this objects.
    just some sprites which have embedded assets from a swf have
    the interactivity (rollover, click...) but also jsut on the
    embedded symbols and not on the whole sprite.
    example: if i put the event on the sprite:
    this.addEventListener(MouseEvent.CLICK, doSomething)
    the event will be just dispatched if i click on the embedded
    symbols.
    i tried Security.allowDomain('*') but this didnt solved my
    problem
    its like i am getting no focus on the sprite.
    like i said before... it was working before the update :-(
    greetings and thankful for every help!
    Pixelista77

    Hi Alex, It could be that with the Upgrade to SP2(a major upgrade) it upset Flash Player:-) I've had various glitches when making system changes as well. Then with the 10.1 version of Flash Player being released at the same time, you may have just got caught in the cross fire:-)
    It sounds like you did everything correctly, but I just want to touch base on the ActiveX Control not being registered.
    When this message is received it can mean the Administrator Account was not used, giving the permissions needed for that. It could also mean that your Anti-Virus/Firewall could have blocked it. Some A/V's even when disabled prior to Uninstalling/Installing, will re-enable upon the first Reboot after the Uninstall.
    Let me know on these.
    Thanks,
    eidnolb

  • Problems after flash player update with firefox

    I have problems with video streaming on firefox after the flash player updated to 11.7. The video plays but the audio suddenly stops while the video continues to play but will also  stop after a few seconds. Does anyone know what may cause this problem?

    Hello,
    Flash Player installs to the Windows directory that standard user accounts do not have access to, therefore, Admin access is required for installation.
    Maria

  • N95 problem after problem after problem

    I decided to get the N95 last december as a little xmas treat for myself little did i know that this phone has been the baine of my life ever since then its broke once already, apperantly i broke the solder points on the board, surley if there weak then there not fit for purpose, i took this up with my provider in the end i paid to get this repaired only for it to go again, i've not bothered getting it done since then, then to put the cherry on the top of my love affair with this phone it kept powering down and then staying off, i bought a new battery, a new charger but it never stopped it then it switched itself off and wouldnt switch on i took it to my local care centre to be told it has to be sent off but you'll get it repaired for free or a replacement as it happens all the time with these i waited for two weeks, called today and was procedded to be told that nokia will not repair it under warranty as its something to do with the board being warped and fualty and thats my fault.Plus the fact i have to pay £20 to get my phone back how crazy :-(
    After choosing the N95 i wished i had not and i can say that i shall never get another nokia in my life ever, I've spent three hours on line triyng to find contact details and email address of customer care and complaint people but all i find is a generic contact us email form.
    I hold no hope for this situation to be sorted and have the possiblity now of a lengthly and costly legal battle over a N95 repair, which i believe should of been done as i believe all parties concerned have broken the
    The Sale and Supply of Goods to Consumers Regulations 2002
    anyway enough of my rant.

    Regardless of the outcome of this mess I hope you do understand that what you've had is just bad luck and possibly bad faith on the part of your network operator. There are many, many satisfied users of N95 handsets − I think they're about the most popular handset in the UK now − because it really is an amazing piece of kit.
    Don't let this experience dampen your enthusiasm for the brand as a whole. You could have had equally bad luck with any brand. I still think that Nokia handsets are easiest to use, feature-packed and very well-built on the whole (except when circuit boards are warped...)
    Also bear in mind that most people posting to forums like this one are, like you, people who have had problems, so don't let the fact that there are very few positive postings extolling the virtues of Nokia phones lead you to believe that nobody likes them!
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • DR8-A2 problems after flashing to 160d

    hello....
    i have a msi dr8-a2
    recently (after upgrading the firmware) it just does not read sony dvd+r discs(previously burnt)..
    it used to read them fine before....also reads any other dvd media fine
    what seems to be the problem?
    the same disc also reads fine on my msi 16x dvd drive...

    yeah well i had to update my firmware for burning fuji discs at 8x otherwise even though it would burn at 8x the disc would be unreadable...
    this was fixed with the 160d firmware...
    however the sony read problem is a major one which should be rectified...
    since the msi dr-8a /a2 family uses the same sanyo chip which is also employed in the optowrite ddo401 which also has the same problem...
    basically the 160e firmware in the optowrite page is just modified so that it would be able to flash the msi drive as the msi shows up as atapi8xmax instead of generic 8xmax

  • Core center problem after flashing

    i have
    (2)operating system in my computer (win-98se)
    and (win-2k).
    newly I have flashing my BIOS with latest version of
    liveupdate and now evrytings are running
    good.
    but whenever corecenter running in my computer in (win-98se)
    I see a blue screen with this content:
    ( A FATAL EXCEPTION 0D HAS ACCURRED AT 0028:E9742715 IN VXD RUSHTOP (01)
    +00000245.THE CURRENT APPLICATION WILL BE TERMINATED )
    and when runing in (win2k) that have result in restarting the system .  
    but i dont have this problem with previous BIOS version .  
    withal :
    i have this problem with previous version of core center and latest version
    of that after flashig !  
    can anybody help me ?
    [email protected]

    What Version of Core-Center are you running?...Sean REILLY875

  • Youtube problem after flash update - again?

    Folks,
    I have FF 27.0 and have just been "stung" with this new FLASH addon.
    I can't play youtube movies.
    I have tried the "TRUST" sites but that was to get FOX TAB working.
    Do I need to do youtube........?
    I did try "Request policy" as an "anti-tracking" but it caused more trouble than I liked, so I disabled it.
    But about that time I updated the FLASH player. Silly me.
    So I am stuck with how to get youtube working?
    I tried downloading Real Player, but that isn't a PLAYER in firefox - that I can resolve.
    All the other posts on this topic are from last year, so as much as they may be "valid", I don't see how they are applicable to THIS case.
    Thanks in advance.

    Thanks to you both.
    Couple of things which I thought were "understood":
    UNTIL the flash update FF and youtube worked fine.
    AFTER the update they didn't.
    There have been posts like this in the past but as I said, that wasn't for THIS flash update.
    (Ok just on closing: I ticked the NEEDS MORE INFORMATION below. Don't know why, but I guess I need more information. What is it really for?)

  • 990fxa gd80bios problem after flash

    i flashed bios to E7640AMS.BE5 (beta5) and after i have black screen. no usb, no video. How to recover old bios.
    Help!!1

    Quote from: xmad on 24-December-12, 02:09:22
    Have you tried clearing the cmos with the power cord removed?
    of course i have. Only HDD works

  • Problem after Flashing BIOS on my B490

    I have Lenovo IdeaPad b490 I boughted yesterday.
    I just find the latest BIOS update for my Notebook.
    I have downloaded the latest BIOS update from This Page, but it just downgrade My BIOS version to an earlier version. Before I try to update, the version is 2013. But after update, It show the UEFI version of 2012.
    Can I revert The BIOS to the version of 2013?
    It also encounter the problem with my Switchable Graphics. The Device Manager told that Geforce GT 720M as my Graphics while I know that my Graphics is Geforce 705M. I also can't use my Nvidia GPU.
    Can anyone give me the latest BIOS? Thx..

    Quote from: Blazer on 22-July-05, 22:39:17
    thats what it sounds like ! contact msi and get a RMA # to return the board,as they can reflash the bios.  good luck
    How do I do that? It looks like MSIs site is clinically clean of any way to actually contact them...

Maybe you are looking for