N95 rebooting problem.

I have discovered that when some, but not all of my friends call me, I am just able to see that someone is calling and than the N95 reboots by itself. I miss the call and the call is not even stated in the incoming box.
It happens only with certain other phones,but every time, independent of providers.
I have the the newest firmware etc.
Greetings Oscar

I have the same problem with phone rebooting when somebody is calling. It happens always when the Music player application is running but paused.
The firmware is the latest one (11.0.026).
Nokia=>Nokia=>Nokia=>N95(RM-159)

Similar Messages

HTC Incredible Reboot Problem - Must All Be In My Mind

Took my malfunctioning HTC Incredible to V-Experience Store for return. It had previously been declared DOA by Verizon Customer Service and identified as part of a bad batch of HTC I's on the market.....
Store Rep tried his hardest to (1) tell me that my malfunction / constant rebooting is all due to the apps I downloaded from the Market (2) the Verizon Customer Service reps don't really know what they are talking about and are too quick to declare a phone DOA (3) there are no bad Incredibles out there - just bad apps and users that don't manage them correctly.
Wow! Never thought that the 5-8 reboots a day which then locks out my touch screen was ultimately my fault. Also didn't realize that the HTC Incredible has no reboot problem that couldn't be solved by resetting it and (based on the Rep's logic), never loading another app on the phone.
A couple of points - Verizon needs to figure out the message regarding the well documented HTC I reboot problem and stay on it. Second - Every time I step into a Verizon Experience store my opinion of Verizon drops.

I hear you man I am on my FOURTH Incredible. The onyl positive is that I have not had a reboot in 3 days which is a record for me.

Envy phoenix 810-209 rebooting problem

I've got a rebooting problem.
everytime unplug my computer and plug in,turn it on,then exactly 10 minuites after,my computer has rebooting automatically once.
and i keep using,then no more rebooting happened.
But i turn it off,unplug it,plug in,turn it on,then it happen again exactly 10 minuite after.
Please help me.....

Hi,
That is a tough one to diagnose.
Do you have your PC set to display bluescreen error messages?
Open Control Panel, System, Advanced System Settings.
Open Startup and Recovery.
Uncheck Automatically Restart.
Click OK.
You should be able to see any error codes when this happens again if the computer is blue screening.
That should not happen under any circumstance. But if I am following what is happening, and your PC only does this after you turn it off and remove/restore AC current, why are you repeating this action?
Does your PC work correctly, including rebooting and cold boots, if you don't unplug from the household power supply?
Jaco
Errare humanum est.

9810 rebooting problem

Blackberry 8910 kept on rebooting after i completed the update for app world , anyone have a solution to this ?

It has to do with the software. If you're getting that message, then you were able to connect to BlackBerry Desktop Software? If so, this is very good.
If you connected to BDS, click Device at the top of the software then Update. You'll be told your phone is already up to date, which you already stated, so then you'll click View Other Versions and click the version with Currently Installed beside it. This will reload the OS that is currently on your phone and that should smooth out the rebooting problem.
Give it a try and post back with your results.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Nokia N95 USB Problem

I have a problem with my Nokia N95-1 considering the USB transfer to my Memory Card.
I have a 1GB Kingston MicroSD, the latest software (V 20.0.015, 13-11-07, RM-159, Balkans Pack, updated from V13); PC Suite v6.85.14.1 on Windows XP Professional.
While I was transfering some 300MB of music to the MicroSD, Explorer crashed and reported that data might have
been lost during the transfer. I checked my phone and noticed "ghost" files on the memory card (free memory was reduced by 300MB, but the phone couldn't register new files). I retransfered the files, disconnected the phone and started the Music Player.
Music Player said "Repairing corrupted database", hanged for a while and then added newly transfered files to the track list. But, when I tried to play a file, it refused to do it and said "Generalystem error". Phone became slow and impossible to operate, so I had to restart it. Same problem occured again, and similar things happened in File Explorer (shows nothing on the card), LCG Jukebox and LCG Xplore (get stucked when they access it or refuse to start files).
After this, I removed the MicroSD - after this, everything on my N95 returned to normal.
Since then, I've tried to change the USB Cable, USB Port, USB Transfer mode; tried to reformat my MicroSD many times with many formatting tools - Phone Memory Card Manager, Windows Formatter, KillDisk, Panasonic SDFormatter - but the result always remained the same: after I retransfer the files to the card, it becomes useless until I reformat it again.
These programs didn't register any corruptions, but Windows Formatter and Panasonic SDFormatter would sometimes report that they were unable to reformat the card.
I tried to insert the MicroSD into my MSI Mega538 MP3 player, reformat, and then transfer files to it. Again,
transfer itself worked okay, but when I inserted the card into my N95, same problem occured. I tried to transfer
some files to the Phone Memory via PC Suite - it worked great.
I tried to insert my friend's 1GB Kingston MicroSD into the phone. It registered it perfectly - Music Player has
refreshed the database, registered new files and played them without any problem. Same goes for the Gallery - some
400 images and videos were recognized right away, and the phone itself worked fast and stable.
When I bought my phone, I had no problems at all - files could be transfered normally, Music Player would simply
refresh the database, and I could use the files easily - no problems, system errors, system hangs or restarts. But after that Explorer crash, I simply can't use the memory card any more.
Sorry for long post, but I really need your help. Is the memory card corrupted, is it a hardware or software problem
with my N95, or is it a Windows glitch?

Hi ivanik,
I strongly believe this is an issue with the card. Seeing that the phone works fine without it and works with a different card perfectly...
Perhaps it is an issue with the data that your transfering to the card. It may not be compatible to the phone. Thus the phone lags and doesnt play the files.
Try loading different data... perhaps one from a source...
Try this once you have formatted your card...

I m having ipad 4 and after upgrading to ios7 I m facing continuously rebooting problem while switching between apps can any buddy help or facing same problem

I m having ipad 4 and after upgrading to ios7 I m facing continuously rebooting problem while switching between apps can any buddy help or facing same problem

Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use..

WinXP reboot problem

Hey... when I've installed Windows XP and choose to run it in the os meny, the computer just reboots. I've tried different versions of XP still same problem. Safe mode or command prompt doesn't work either.
The thing is, I have tried to install XP many times now and I've had different error messages but I have always been able to boot XP. Now, without a reason, the computer just reboots! Very strange.

Hardware:
Athlon 64 3000+
MSI K8T NEO-FIS2R
TwinMOS PC3200 DDR-DIMM 512 MB m/Winbond (400 MHz)
Maxtor DiamondMax Plus 9 160GB S-ATA - S-ATA/150 8MB cache
PowerColor Radeon 9660 256 MB DDR
CNet PCI Fast Ethernet Adapter (didn't know the motherboard had integrated network card :s)
I'm pretty sure it's my HD that messes up the system.
Drivers:
VIA Serial ATA RAID Controller
VIA ATA/ATAPI Host Controller
Promise FastTrak 376/378 (tm) Controller
Promise SATA-150 TX Series (tm) Controller
Okey... first I had a problem with a bluescreen when trying to install XP. This was fixed by disabling the external cache and shadowing in BIOS. I'm running ME as my primary and active partition, having XP to test on the other partition as logical. Tried to set it to active but the meny where you would choose OS didn't appear. But I'm still saying that I've been able to run XP before on that partition...
1. I started with loading all the drivers with F6. Then when the installation run there were 2 pop-up error messages about something that the VIA SATA drivers didn't support XP... not sure what it stood but I clicked continue. So when I run XP and installed the drivers and tried to update with Windows Update, a message appeared on the screen telling me to shut down all work because the computer is going to restart in 60 seconds. I guess it has something to do with the error messages earlier when I installed. So the message kept coming up every time I booted up XP and there was no way of canceling it. I realised I shouldn't load both drivers (stupid me), I thought both were needed to get rid of the "can't find HD screen", but then I read on this forum that you should load either VIA or Promise...
2. I tried to load the VIA drivers, but then a bluescreen appeared so the VIA drivers were not an option.
3. Then I tried the Promise drivers, and it worked. No error messages during installation either. But then after the installation, all of a sudden, when I choosed to boot XP, the computer just rebooted!
4. I tried to install another time loading all the drivers. Now, the error messages didn't appear (they should had!) BUT the computer reboots when I choose XP... and now I can't even get XP to boot I don't know what the h*ll happened!
I'm sure if I could get rid of the reboot problem I could try install Promise drivers again and check if it would work correctly. Running BIOS 1.20 update. And I have tried to get XP to work in 2 weeks now and reinstalled XP over and over again, deleeting the partition and then creating new NTFS with quickformat. I'm getting tired of this as my ME partition can't run any games because the latest graphic card drivers doesn't support ME... If I just had choosen to have the OS installed (like an 120$ extra) when I ordered the computer I wouldn't have all those problems... but then I know it is POSSIBLE to get XP to work or else they wouldn't have the installation option when ordering!!
This is as much info as I can give you... hope it helps.

Reboot problem with MSI K8N Neo2 Platinum and 250 GB SATA HDD

I'm having a "reboot" problem with my MSI K8N Neo2 Platinum. After turning my system on it will run without any problems, until I reboot. After a reboot it will always hang after the initial windows-bootscreen. The HDD-light will remain on. If, instead of going into Windows XP SP2, I try to enter the BIOS after a reboot (DEL) the system will also hang (blank screen with blinking cursor).
It started doing this after I installed the Maxtor 250 GB SATA disk. Before, I didn't have problems rebooting. If I disconnect the Maxtor drive I can reboot and enter BIOS and Windows each and every time. Reconnecting the Maxtor 250 GB SATA drive will return the reboot problem. I always have to use the power swith to get a working system again. It's not enough to do a hard reset (this has the same effect as rebooting).
Here are the details of my system:
MSI K8N Neo2 Platinum (BIOS 1.B)
Athlon 64 3200+ (Winchester, 2 Ghz, 512 KB cache, stepping DH-D0)
2 x Kingston KVR400X64C25/512, 512 MB, DDR, PC3200 (2,5-3-3-8 T1)
Asus Radeon AX800 Pro (256 MB)
PSU Antec Sonata 380W
HDD Maxtor 80Gb ATA (6Y080P0, Pri Master)
HDD Seagate 250Gb SATA (ST3200822AS)
HDD Maxtor 250Gb SATA (6V250F0 - jumpered in SATA150 mode, the mobo wouldn't work with the drive in SATA300-mode)
Aopen COM5232/AAH Pro CD-Writer ATA (Sec Master)
BenQ DW1640 DVD-Writer ATA (Sec Slave)
P.S. The NVidia IDE-drivers are NOT installed. System is not overclocked.

Thank you for all the replies. Upgrading to the latest Nvidia IDE-drivers did not fix my problem. Moving to other SATA-ports did not help either. Upgrading the mobo's BIOS is not really an option (I'm using one version before the most recent and there isn't anything in the fixlist of the latest BIOS).
Now I've contacted Maxtor for (hopefully) a new firmware.
Quote from: rogueUK on 31-July-06, 16:55:42
insego please use the SEARCH BUTTON
I did use the search function to find other people with similar problems. The reason I started a topic of my own was because of the text you get while joining:
Quote
Do not hijack another persons topic. If you have a similar problem, start your own thread anyway.
Maybe in retrospect I should first have tried the solutions in other topics.

KT4 Ultra crashing/rebooting problems

Hi all, I've been having computer crashing/rebooting problems when I play 3d games since I got this board. It can happen between 1-40 minutes during a game session and when the computer crashes, the screen would garble up and reboot along with the garbled screen until I cold boot it. I thought it was a heat problem at first but the cpu heat displays at between 34C-39C. Also, when I tried switching out the video card with an older one, the computer works fine during gameplay, and my newer video card ran fine on a friend's computer. Does anyone know of a way to fix this?
System specs are:
Motherboard: MSI KT4 Ultra
CPU: AMD AthlonXP 2400
Power: 300watt
Ram: PC 2700 333mhz DDR 256MB
Video: Gainward Geforce4 Ti4200 Power Pack Plus! Ultra 650 64MB
Sound: Onboard
Thanks

by the sound of it try a bigger psu,antec enermax over 400 watts
make sure fan on cards not loose

Reboot problem when OC the 975X Power Up

I don't want to break any OC record, only want to reach 3 Ghz, but without rebooting problems. Is there a BIOS version that fixed this problem ???. I am currently using the latest (7.3A), and despite now I can set the memory in 1:1 mode (with 7.2 I can't), when I set the FSB to 333 the reboot problem arise. In fact the reboot problem occurs when I set the FSB higher than 310-315 mhz. At 3 Ghz the board is rock solid and run all test, and even the memory at 667 mhz perform equal than 777 mhz (310 * 2 * 1.25). I have to note that the voltages are all stock, and C1E and speedstep are enabled (at 2.8 Ghz works great), do you have any suggestion with this items ??

Quote from: DragonFury on 06-January-07, 22:50:44
memory compatability . i tried 3 different sets of memory ranging from 533 - 800 mhz ( what the board supports ) the samsung 533 5,5,5,15 reboot issues , Ocz 667 5,5,5,15 no reboot issues up to 400 fsb ( its when i break 400 + is when i need to safe mode the bios ) but this is memory getting pushed to hard . and crucial 800 4,4,4,12 reboot issue but the mb remembers my fsb beyond 400 + fsb ( no safe moding the bios on a shut down ) but because of the compatability issue with the crucial i cant break 400 fsb because it wont hold it . the ocz i can do 430 easily . again here we are . is it mb manu , chip set manu , or mem ? me i am goin towards Memory manufacturers because it is there job to make sure there chips work on multiple platforms and keep up with the times . the only thing we can do too help is contact the memory manufacturers tell them our problems rma our current memory and hope they listen to us .... again ITS NOT MSI fault that memory wasnt cut for a peticular chipset they use .
After reading at many forums it seems to me that the memory problems with 975x/965 chipsets are widespread across all motherboard makers. I don't know if the AMD platform is having many problems with high perfomance DDR2 memory, but at the intel side is a nightmare, and I believe is worst with the 975x than 965.
What model is your OCZ memory ??, Value Pro or Gold ??, if Value Pro, has the copper heatspreader or XTC heatspreader ?? (as mine and not even OCZ support can identify...). I am very curious because with it you don't have the reboot problem, and I do have >:(

Multiple cold dtart reboot problem may be linked to Audio drivers!

All-
I received my RMAed board (975x PUE) back 2 weeks ago as there was a problem with my board. Re-installed everything...after afinally figuring out that no other drives but the SATA raid volume need to be in for install or raid volume will not be C: Everything was working fine until I loaded my Audigy Gamer sound card drivers, then windows could not start-up normally. I ripped out the card and restored windows to before the indtall. Everything back to working. So then I decided to install the on-board audio driver and bango! Lot's of cold boot and reboot problems. It usually takes 2-3 tried before windows will come up properly. I have downloaded the latest drivers for both MSI and Realtek...problem still remains.
Any ideas?

I have not flashed the bios and it is the on-board sound! Any idea why cold boot and re-start take multiple tries?
Mark

Lockup/reboot problem with N95 v20.0.015

Hi
I installed v20.0.015 on a N95 and now the phone regularly locks up completely or restarts for no reason. It's made the phone pretty useless. Has anyone else had this problem?

I had the very same problem and I have fixed it!
The problem isn't the phone at all, but a corrupt download of the firmware! NSU will only download firmware if it hasn't already, which is why reflashing your phone doesn't solve the problem! So to fix the problem you have to delete the corrupt files and run NSU again!
Trouble is, the files are hidden away as system files so you have to unhide them first!
Here's how to do it all...
Click "Start", "My Computer", "Tools" then "Folder Options"
A Folder Options Window will open.
Click on the "View" Tab, Then under "Advanced settings"
Check the "Show hidden files and folders" radio and
uncheck "Hide protected operating system file (Recommended)" box.
A warning will appear when you uncheck it, don't worry, the files you will be deleting are not system files, but have been marked as such by NSU, so click on "Yes" and then "OK"
Now navigate to the following location on your Windows hard drive (Usually C: on most PCs)
Documents and Settings
All Users
Application Data
Nokia
Nokia Service Layer
A
nsl_service_module_00001
www.dsut.online.nokia.com.oti.caresuite
Products
rm-159
OR copy and paste the following without the quotes into the address bar and press enter!
"C:\Documents and Settings\All Users\Application Data\Nokia\Nokia Service Layer\A\nsl_service_module_00001\www.dsut.online.nokia.com.oti.caresuite\Products\rm-159"
Now select all the files shown and delete them!
That's that, now to re-hide the system files,
click "Tools" "Folder Options", Click on "View" tab.
Check the "Do not show hidden files and folders" radio and
check "Hide protected operating system file (Recommended)" box. Click OK!
Now run NSU just as you did before! New firmware will download!
I hope this solves your problem!Message Edited by pjaysnowden on 03-Dec-200712:46 AM
Message Edited by pjaysnowden on 03-Dec-200712:46 AM
Message Edited by pjaysnowden on 03-Dec-200712:50 AM

N95 Reboot Plz Help!

Hi!
Yesterday i installed a theme on my phone (like i allways do) no problems, the theme worked fine. But today i wanted to change back to my old theme. And when i tried to open the themes folder (on the n95) it just rebooted.
And now i cant change themes at all, every time i try to open the theme folder in the phone under the adjust menu (not sure if it is called adjust in English) the n95 just reboots. The screen turns black 4 a few seconds then the nokia loggo appears and it starts up again.
I also updated the phone to the newest version, but i still have the same problem =/
I am really thankful if someone can help. Don't want to by a new phone just because of this.
Thanks in advance!!

15-Oct-2008 04:23 PM
eaco wrote:
nope didn't work , when i tried to install the Theme Scheduler i get an certificate error.
Hi eaco
For certificate problems:
Firstly go to Application Manager > Options > Settings and set "Online Certificate check" = Off and Software Installation = All.
Secondly try resetting date on phone to January 1 2007 first and if that doesn't work try December 31 2006 as Symbian certificate may have expired; reset date after installation.
The actual date is a case of trial and error and previously quoted dates may no longer apply due to the passage of time.
Happy to have helped forum in a small way with a Support Ratio = 37.0

N95 update problems

Hello, I'm from Lithuania, but my phone is from england. So I want to update it.
[img]http://img249.imageshack.us/img249/6578/nokiacn9.jpg[/img]
Nokia software updater show this and don't do anything, and I waiting about three hours for finish
My phone show only NOKIA. What's the problem? Sorry for very bad english language

I had the same problem when trying to upgrade software on my Nokia N95.
Part way through the SoftwareUpdate upgrading my software on the N95 (using Software update 1.4.98en running on Windows XP Pro SP3) it prompted for the "BB5 ADL Loader"driver to be installed.
I eventually found out the problem was caused by "Spybot Search and Destroy" stopping either PC Suite or the Nokia Software Updater installing properly when they were initially installed. To fix this I did the following:
1) Uninstall Spybot Search and Destroy (or at least disable it's services)
2) Uninstall Nokia PC Suite and any associated USB cable drivers
3) Make sure you phone is not connected
4) Reboot the PC
5) Re-install the latest PC Suite for your phone
6) Connect your phone by USB cable (or bluetooth) - and allow drivers to install
7) Run Nokia Software update
This time the drivers should be recognised and auto-install.
Good luck!

N95 8GB: Problem on deleting video file

Hi,
Is there any body experienced this problem. When I'm trying to delete a file from Video Centre > My videos directory, I'm receiving this error... "Unable to delete. File video.mp4 is open."
Do you have resolution for this? Tnx in advance.
Br,
Pete

21-Nov-200709:06 PM
pmpinguel wrote:
posted my detailed steps in the n95 8gb main discussion thread. go see
I followed your steps but I got this message.... "USB data transfer mode activated. MASS MEMORY MAY NOT BE USED DURING THIS TIME."
Actually the video file was not there anymore in my File Mgr folder but the problem is the video file is still there in Video centre > My videos folder. When I tried to delete the file using "c" or Options > delete, the error says "Unable to delete. File video.mp4 is open."
I also tried to reset the phone to its factory settings but still video file was there.
I think this is a bug. Pls advice. Tnx in advance.
Br,
Pete

N95 rebooting problem.

Similar Messages

Maybe you are looking for