N95 repeatedly loses consciousness during the upda...

What is the problem as my N95 repeatedly (already 5 times) loses consciousness during the update. There is plenty of power in the battery and I have charger cable connected.
The PC update software always asks me to resurrect the phone ("elvytä" in Finnish) by removing the battery and charger for a moment and reconnecting, pressing the power on button for a few seconds and then pressing some type of "try to resurrect" button on the update sw's user interface.
I have tried to
* not have the charger plugged in (no effect)
* not to give pin (does not resurrect)
* to give pin (seems the way to go but dies again)
After so many times of having to resurrect the phone I have now canceled the sw update, but now the phone seems to die on its own.
What to do?

It's happened to me twice in the last 11 days, and it's happened twice to another user as well. See this thread for more:
https://discussions.apple.com/thread/4408720?start=0&tstart=0
Not too pleased about this, because it takes about 30 hours to sync my 64 GB Touch due to converting to 128 Kbps AAC. This never happened to me with any version of iOS prior to 6. It's just music that goes missing, and it is not due to wireless sync, which I disabled long ago.

Similar Messages

  • N95 alarm not functioning during the phone is turi...

    After i upgrade my N95 to V20.0.015, i find that my alarm is not functioning during the phone is off. May i know what cause this problem occur?

    07-Dec-2007 07:38 AM
    calixteid wrote:
    Sorry, no answer to this but tried to get the new software download from Nokia but only gives the V12 0 013 update.
    has the download helped other problem?
    That is because the code on your phone has not been authorised to get the latest FW update. Either an operator is not passing it yet or its country specific.
    The best way to get a quick response is to use the boards. Please do not be offended if I don't answer emails immediately.

  • Can anyone help me write a script that would click "get info" and then "enter" on each movie in my itunes library? I am asking because my itunes 11 repeatedly loses the artwork to my movies in my itunes library.

    Can anyone help me write a script that would click "get info" and then "enter" on each movie in my itunes library? I am asking because my itunes 11 repeatedly loses the artwork to my movies in my itunes library. I can restore the artwork (and make my apple tv see the movie exists as well) by going into the movie library and clicking on each movie by hand, slecting get info, and then selecting enter. Now doing this 10 times in 20 days was fun and all BUT I would really like to automate the process so everytime itunes screws it up I can fix it easier.
    I saw this example of an itunes script that restores artwork for music
    tell application "iTunes" set theSelection to selection repeat with i from 1 to count of theSelection tell (item i of theSelection) set artworkCount to count of artwork repeat artworkCount times set theArtwork to data of artwork 1 delete artwork 1 set data of artwork artworkCount to theArtwork end repeat end tell end repeat end tell
    but I need to tweak this to fit my needs for simply clicking the "get info" button and "enter" in the movie library rather than all the stuff this guy has listed. Any ideas or help on writing this? Thanks.

    Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

  • I repeatedly receive an error when my IPad is trying to restore during the IOS 5 update. The error is (-50).  How do I fix this?

    I repeatedly receive an error when my IPad is trying to restore during the IOS 5 update. The error is (-50).  How do I fix this?

    Try restarting everything and then try to sync or reactivate. Quit iTunes, reboot your computer, reboot your iPad and then try again.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • I have an iMac (Mid 2010) and am running 0sx 10.8.5 and the WiFi always loses connection during sleep mode. I have seen numerous different solutions none of which seem to work. Can anyone help?

    I have an iMac (Mid 2010) and am running 0sx 10.8.5 and the WiFi always loses connection during sleep mode. I have seen numerous different solutions none of which seem to work. Can anyone help?

    Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
    1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
              Remember networks this computer has joined
    is checked.
    2. Follow the instructions in this support article under the heading
              Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
    3. Reset the PRAM.
    4. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
    5. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
    6. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
    7. Repair permissions on the startup volume.
    8. Turn off Bluetooth and test.
    9. Reset the System Management Controller.
    10. This step shouldn't be necessary, but has been advised by Apple Support in some cases, apparently as a workaround for a bug. Open the Energy Saver pane in System Preferences. If applicable, click the padlock icon in the lower left corner to unlock the settings. Enter your administrator login password when prompted.
    Select the Power Adapter tab and uncheck the boxes marked
              Wake for Wi-Fi network access
    and
              Enable Power Nap...
    if present. Then, if the computer is a MacBook, select the Battery tab and uncheck
              Enable Power Nap...
    11. Reinstall OS X.

  • Error during the upgrade phase "start_shdi_first"

    Hello,
    We are having issue with upgrading r/3 4.7 enterprise extension set to ECC 6.0
    Here the error message goes....
    starting system failed rc=0
    to analyse the error during start of shadow instance
    view files 'Startsfi.log' and 'devtrace.log'
    in directory usr\..put
    repeat phase until shadow instance is started
    and u can logon instance no '01'"
    We have changed the DDIC password during upgrade.after that we ran the initphase to update the password.
    I think sapup is referring the old password which was entered initially during the upgrade and we dont remember the old password also.
    Appreciate your response
    Startsfi.log
    1 ETQ201XEntering upgrade-phase "START_SHDI_FIRST" ("20080218175653")
    2 ETQ366 Connect variables are set for shadow instance access
    4 ETQ399 System-nr = '01', GwService = 'sapgw01'
    4 ETQ399 Environment variables:
    4 ETQ399   dbs_mss_schema=de4
    4 ETQ399   auth_shadow_upgrade=1
    4 ETQ399 Set environment for shadow connect:
    4 ETQ399 ENV: dbs_mss_schema=de4
    4 ETQ399 ENV: auth_shadow_upgrade=1
    4 ETQ399 Set RFC variables for shadow connect:
    4 ETQ399 System-nr = '01', GwService = 'sapgw01'
    4 ETQ399 Set tool parameters for shadow connect:
    4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
    4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
    4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
    4 ETQ383 translates to path "exe"
    4 ETQ383 translates to path "exe"
    4 ETQ399   default TPPARAM: SHADOW.TPP
    4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
    4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SWITCH"
    4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
    4 ETQ383 translates to path "exe"
    4 ETQ383 translates to path "exe"
    2 ETQ399 Starting shadow instance
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2 ETQ353 Starting system
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2WETQ372 test RFC failed, rc="-3"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2WETQ372 test RFC failed, rc="-3"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2WETQ372 test RFC failed, rc="-3"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2WETQ372 test RFC failed, rc="-3"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2WETQ372 test RFC failed, rc="-3"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2WETQ372 test RFC failed, rc="-3"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2WETQ372 test RFC failed, rc="-3"
    2EETQ399 Starting shadow instance failed
    2EETQ399 Test RFC failed finally
    2EETQ399 Dialogue: ERROR
    2EETQ399 Starting system failed, rc=0
    DEVTRACE:
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      01
    sid        DE4
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    111
    intno      20050900
    make:      multithreaded, ASCII, optimized
    pid        2272
    Mon Feb 18 16:08:40 2008
    kernel runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
    length of sys_adm_ext is 364 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (01 2272) [dpxxdisp.c   1239]
         shared lib "dw_xml.dll" version 111 successfully loaded
         shared lib "dw_xtc.dll" version 111 successfully loaded
         shared lib "dw_stl.dll" version 111 successfully loaded
         shared lib "dw_gui.dll" version 111 successfully loaded
         shared lib "dw_mdm.dll" version 111 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    Mon Feb 18 16:08:52 2008
    WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0065.qqq.nxst) took 12 seconds
    Mon Feb 18 16:09:10 2008
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 18 seconds
    ***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5361]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >MTW02SDEC01_DE4_01                      <
    DpShMCreate: sizeof(wp_adm)          19976     (908)
    DpShMCreate: sizeof(tm_adm)          3605136     (17936)
    DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    DpShMCreate: sizeof(comm_adm)          528048     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1296)
    DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 065C0040, size: 4241064)
    DpShMCreate: allocated sys_adm at 065C0040
    DpShMCreate: allocated wp_adm at 065C1B30
    DpShMCreate: allocated tm_adm_list at 065C6938
    DpShMCreate: allocated tm_adm at 065C6968
    DpShMCreate: allocated wp_ca_adm at 06936BF8
    DpShMCreate: allocated appc_ca_adm at 0693B248
    DpShMCreate: allocated comm_adm at 0693C9B8
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 069BD868
    DpShMCreate: allocated gw_adm at 069BD8A8
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 069BD8D8
    DpShMCreate: allocated wall_adm at 069BD8E0
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 2046 blocks reserved for free list.
    ES initialized.
    WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c   12437]
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG Q0K=> DpMsAttach, mscon ( MTW02SDEC01) [dpxxdisp.c   11753]
    DpStartStopMsg: send start message (myname is >MTW02SDEC01_DE4_01                      <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 111
    Release check o.K.
    Mon Feb 18 16:09:13 2008
    MBUF state ACTIVE
    DpModState: change server state from STARTING to ACTIVE
    trc file: "dev_ms", trc level: 1, release: "700"
    [Thr 4724] Mon Feb 18 16:08:40 2008
    [Thr 4724] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    110
    intno      20050900
    make:      multithreaded, ASCII, optimized
    pid        5420
    [Thr 4724] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 5420) [msxxserv.c   1824]
    [Thr 4724] MsInitAclInfo: acl file D:\usr\sap\put\DE4\SYS\global\ms_acl_info.DAT not found, unrestricted access
    [Thr 4724] MsGetOwnIpAddr: my host addresses are :
    [Thr 4724]   1 : [172.20.28.159] MTW02SDEC01.mindsap.com (HOSTNAME)
    [Thr 4724]   2 : [127.0.0.1] MTW02SDEC01.mindsap.com (LOCALHOST)
    [Thr 4724] MsHttpInit: full qualified hostname = MTW02SDEC01.mindsap.com
    [Thr 4724] HTTP logging is switch off
    [Thr 4724] MsHttpOwnDomain: own domain[1] = mindsap.com
    [Thr 4724] ms/icf_info_server : deleted
    [Thr 4724] *** I listen to port sapmsSHDDE4 (3601) ***
    [Thr 4724] CUSTOMER KEY: >J1537289841<
    trc file: "dev_rd", trc level: 1, release: "700"
    Mon Feb 18 16:09:10 2008
    ***LOG S00=> GwInitReader, gateway started ( 2344) [gwxxrd.c     1694]
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    110
    intno      20050900
    make:      multithreaded, ASCII, optimized
    pid        2344
    gateway runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
    gw/local_addr : 0.0.0.0
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
    Bind service sapgw01 (socket) to port 3301
    GwPrintMyHostAddr: my host addresses are :
      1 : [172.20.28.159] MTW02SDEC01.mindsap.com (HOSTNAME)
      2 : [127.0.0.1] MTW02SDEC01.mindsap.com (LOCALHOST)
    DpSysAdmExtCreate: ABAP is active
    DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    DpShMCreate: sizeof(wp_adm)          19976     (908)
    DpShMCreate: sizeof(tm_adm)          3605136     (17936)
    DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    DpShMCreate: sizeof(comm_adm)          528048     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1296)
    DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 06110040, size: 4241064)
    DpShMCreate: allocated sys_adm at 06110040
    DpShMCreate: allocated wp_adm at 06111B30
    DpShMCreate: allocated tm_adm_list at 06116938
    DpShMCreate: allocated tm_adm at 06116968
    DpShMCreate: allocated appc_ca_adm at 0648B248
    DpShMCreate: allocated comm_adm at 0648C9B8
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 0650D868
    DpShMCreate: allocated gw_adm at 0650D8A8
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 0650D8D8
    MtxInit: -2 0 0
    Mon Feb 18 16:09:14 2008
    GwDpInit: attached to gw_adm at 0650D8A8
    Thanks,
    Vadi

    Dear All,
    The issue has been resolved by changing the DDIC password to what it was when we have started the upgrade.The password was "welcome" when we have started with upgrade after that it has been changed to
    "basis05" during upgrade.we changed it back to welcome and it started working fine.
    Here it took long time to find out what was the password when we have starte upgrade.Resetting to standard ddic password also ddint help out in our case.
    Thanks for all your replies.

  • An error ocurred during the installation of assembly 'Microsoft. VC80.crt,type="win32", version="8.0.50727.4053".publickKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="amd64".Please refer to help and support for more information. HRESULT: 0x80071A30

    An error ocurred during the installation of assembly 'Microsoft. VC80.crt,type="win32", version="8.0.50727.4053".publickKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="amd64".Please refer to help and support for more information. HRESULT: 0x80071A30
    Instale iTunes perfectamente, conecte mi iPone y me dijo que necesitaba otra version que borrase la actual y instalase la nueva, borre la que tenia, y al instalar la nueva me salia esto y no tengo forma de instalarla. Ya hice los tutoriales de la pagina, y nada.

    OK.  If both of you are Windows 7.  Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
    After that see if you still get this error message.
    The last resort would be to unistall and reinstall the whole thing.
    Follow the steps below:
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
    3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

  • BBP_PO_SEND_XML - Not triggered during the creation of PO

    Hi All,
    We are using SRM 7.0, configuration for sending PO in the form of XML is done as suggested with the method BBP_PO_SEND_XML. The problem is, this BADI is not triggered when we save (even after order) the PO with XML option and the status is displayed as Incorrectly processed. But, when I select the Incorrectly processed output type and click on Repeat Output, the BADI is called and is processed succesfully.
    Any reasons, why the BADI is not triggered during the creation or change of PO and is getting triggered only when we select the option Repeat Output? Please help me in correcting this issue.
    Thanks,
    Phani.

    Logic inside META_PO_SEND was written in user name check. Whereas the method BBP_PO_SEND_XML is triggered with batch user. Due to this reason, custom logic is not triggered.

  • Errors in PHASE DIFFEX phase during the CRM 6.0 upg from CRM 5.0

    Hello,
    I am in the process of upgading our CRM systems from CRM 5.0 version to
    CRM 6.0 and having issues at the PHASE DIFFEXPADDE during the upgrade
    right after the DB_ACTION_LOWQ1 phase and ADJUSTCHK being the previous
    phase.
    We are currently at CRM 5.0 dual stack system on Linux X86_64 SLES9 and
    DB - Oracle 10.2.0.2.
    I was able to finish the PREPARE phases on both ABAP & JAVA stacks
    successfully.
    The phase DIFFEXPADDE is failing with a error message in the
    DIFFEXPA.ELG which I have mentioned below. I am also attching few other
    related logs for your reference in the attached zip file
    (DIFFEXPA_logs.rar)
    DIFFEXPA.LOG
    UpgDialog.log
    SAPECCI700.C15
    TP00.ECO
    SAPup.log
    "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ADD ON OBJECTS (DATA)-Export ERRORS and RETURN CODE in SAPECCI700.<SID>
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    2EETW190 "INDX" "WFMFC_INDTOR_GRP 01 " has no active
    version.
    Long text:
    Cause
    You have tried to export a Dictionary object that has no active
    version. The reason for this probably is that the author of the DD object has forgotten to activate it.
    System Response
    The transport request is not released.
    What to do
    Activate the Dictionary object and repeat the export.
    2EETP200 Export with errors, request will not be imported
    Long text:
    Cause
    The export was finished with errors or terminated (return code >=
    8).
    System Response
    The request is not imported. Instead it is set back to "can be
    changed"
    in the source system.
    What to do
    The export log contains remarks concerning the reason for the
    incorrect
    export. Correct the error and repeat the export.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ADD ON OBJECTS (DATA)-Export ERRORS and RETURN CODE in SAPECCI701.C15
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ADD ON OBJECTS (DATA)-Export ERRORS and RETURN CODE in SAPECCI702.C15
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    I am stuck at this step and unable to move forward until I get past
    this error. Please let me know how do I proceed and if you have any
    more questions.
    Would appreciate your early help!
    Thanks in advance!

    I was able to get past this issue by logging in to the client 000 and
    activate the object WFMFC_INDTOR_GRP from transaction SE11.
    Dictionary Object --> Activate from the menu bar. Gave me few warnings
    but did not error out.
    Hence went past the phase and the upgrade is progressing as of now.
    However, can you please confirm if this is a correct fix or do you want
    me to do anything different since I have not reached the MODPROF_TRANS
    phase yet.
    Thanks

  • Mavericks 10.9.1 keeps erring during the download and will not complete.  What do I do?

    Mavircks 10.9.1 keeps erring during the download and will not complete.  What do I do?

    Get the official version of Firefox here: http://www.mozilla.com/en-US/firefox/
    As long as you '''''don't''''' select the option to '''Remove Firefox personal data and customizations''' when you un-install that "Yahoo version", you won't lose anything.

  • PLEASE HELP ! While updating My Xperia Z1 , my pc hanged during the process and .

    While updating My Xperia Z1 , my pc hanged during the process ( so , installation of update was interrupted , guess it's same as getting your USB connection disconnected )and now the phone won't turn on .
    Its shows the Sony Xperia logo , then shows a black lit screen , and that's it , nothing else happens . I can only turn it off by pressing and holding the power+up volume button , but it turns on automatically if plugged in for charging or in PC only till it gets that black screen .
    I tried to flash it with a flashtool (Emma) , but it says phone locked , but since it can't even be turned on , i can't unlock it .
    It's a store bought phone and is not of any contracts with any mobile service provider or anything like that ....
    Funny you know ... my PC had to crash at the moment i was updating it .... my luck ....
    Anyways , now please can anyone tell me what i can do ? I'm sure there is a way i can fix it using my pc and other downloadable software , so please can some one help me how i can fix this problem ? I don't care if i lose all the data on it , i just want my phone back ....
    Solved!
    Go to Solution.

    Problem Solved ,Thank you  very much !! 
    For those who might face the problem and stumble upon this thread after googling  
    Read above mentioned comments 
    Now here's what I did :
    Turned the phone off by power+volume key method , then plugged it in to the pc via USB and opened sony pc companion , entered Support zone , then entered the Update device option , then I Unplugged my device , only after doing this a window pops up with  Repair my phone/tablet in blue text , then i clicked on that and followed the simple instructions ..
    It's basically what Thommo said , only i was so freaked out at that time that i failed to follow his instructions to the letter  
    So now my phone is back to normal , and , it got the latest lolipop update !
    Problem solved i guess  but Thommo , i need to disturb you again with  just one more  question ,  since at the very beginning , the update process was interrupted , and now i got lolipop after  the repair ,without needing to update again ,  so has the lollipop been installed properly on my phone or do i need to use any other flashtool to re-install lollipop ? 
    again , Thank you ... 

  • Problems during the installation of NSU

    Hi everybody! I have Nokia N95, it's my first Nokia ) Today I downloaded NSU and tried to install it. I had an error ("Command line option syntax error. Type Command /? for Help") during the installation of Microsoft Visual C 2005 Redistributable. I skiped this error and continued installation of NSU. All was ok untill the last moment, when I wanted to upgrade the firmware on my N95: there was just white screen ( in the NSU) on my PC and noting more, so I had cancelled the process. I think, that this problem occured because of that error with Microsoft Visual C2005 Redistributable.
    What do I have to do? Thanks for all answers )

    I have the same problem with my nokia E50, but no one have helped me.

  • How do I finish updating my iPhone4 to iOS7 when it closed down during the process as I had it tethered to my computer and I assume the computer needed the internet to complete the process?

    How can I finish updating my iPhone 4 to iOS7 when I had it tethered to my computer (computer using the connection from my phone) and during the updating process, when the phone restarts itself, I lose the internet connection (silly me, not thinking of this) and now it can't finish the process. Can I use a friends computer if I log into my iTunes account...as I downloaded it ok...just cant finish the update. Any ideas?
    Thanks
    K

    If this is the third time that this has happened to you, I don't blame you for being upset. On the other hand, after the second time, you should have learned the importance of backing up your iOS devices and apparently you didn't do that or you wouldn't be in such a panic.
    You cannot downgrade the iOS, You have to restore your phone now and all of the contents will be erased. I think you know that though, and I think that you know that there is no way around it either.

  • Hi i uppdate my I phone 4 to iso6 via laptop ,during the operation the laptop restart it's self then I connect my iPhone 4 to iTunes again to finish the uppdating but its stuck to Apple log tried to restor it again via iTunes i get the same stuck to logo

    Hi i uppdate my I phone 4 to iso6 via laptop ,during the operation the laptop restart it's self then I connect my iPhone 4 to iTunes again to finish the uppdating but its stuck to Apple log tried to restore it again via iTunes i get the same problem its stuck to Apple logo i tried to restor it from another pc i get the same problem anyone can help please

    Hi, did you ever solve this problem?
    My 1 year old -- ha! one month out of warranty -- iPhone 4 has been having a nearly identical problem over the past few days.
    It started by dying completely so I had the battery replaced, thinking it was simply battery issue.
    It then worked again for a moment but started doing exactly what you describe, going through a reset cycle (longer than 30 seconds but who's counting). And it felt quite warm.
    Did hard reset, plugged into wall charger and MBP USB but the new battery wouldn't even get a full charge (a whopping 92% after nearly two days). It would even lose battery when plugged in if I opened an app. And all the while plugged in, if I left the phone on, it would cycle through these resets. So I turned it off to try to charge it.
    Now suddenly, it's dead again. Totally black, and hard reset does nothing. Up until two days ago there was nothing wrong whatsoever with this phone! And I hadn't even installed a new app that could be the root of the issue. No idea whatsoever what caused this.
    Any help would be much appreciated!!

  • I have an original Ipad, I tired to update it, but during the update it gave me an error message (1602) an now it just has a picture of itunes and a ubs cord?  Please help!!

    I have an original Ipad, I tired to update it, but during the update it gave me an error message (1602) an now it just has a picture of itunes and a ubs cord?  Please help!!

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Maybe you are looking for

  • TS1362 I bought an album, but some of the songs purchased don't play fully

    I bought an album off of the itunes store today, and while listening to a few found that some of the songs cut out mid song. The time on the top of the tunes continues, but no audio comes out. How do I go about fixing this?

  • Want a better solution for radiobutton code

    I am using radio buttons the code works but it seems very long winded any ideas how I can cut down the code? // code snippet //basicly decare some JRadioButton //set action command currentaccount = new JRadioButton("Current Account"); currentaccount.

  • Digital Signature on pdf Invoice generated by BI Publisher

    Hi, Can BI Publisher add a digital signature to a pdf invoice to certify it when viewed by e-billing ? Do you know if this has been done elsewhere. BI Publisher needs to call the local authority responsible for digital signatures to sign the pdf invo

  • Choosing the correct offer or job

    Hi DBAs, This situation may be common but still I would like to discuss,I have 2 offers in my hand.I have to choose one,so what all the criteria's we have to see while choosing the best job.I working as ORACLE DBA since 3 yrs but still I'm having a t

  • Add Shopping Cart field on POWL screen of Confirmation Tab

    We have a requirement to search confirmations by a shopping cart number.  To achieve this we need to add shopping cart field on confirmation tab (POWL).  Any ideas?  Thanks.