N95 software update in windows XP Pro 64 Bit will ...

N95 software update in windows XP Pro 64 Bit will not work
says O/S not suported
any walk around or other way to update
Thanks john

/discussions/board/message?board.id=swupdate&message.id=23383

Similar Messages

  • I was installing the new EFI software update on my macbook pro and I became stuck on the grey screen with the window that said "installing 2 items", its been on the same screen for 2 1/2 hours. does anyone know what I can do?

    As the title says.
    I was installing the new EFI software update on my macbook pro and I became stuck on the grey screen with the window that said "installing 2 items", its been on the same screen for 2 1/2 hours. does anyone know what I can do?
    I don't want to restart it because im scared that something might go wrong.
    operating lion

    LimitLess- wrote:
    Hi,
    I had the power supply connected when I attempted it previously but even so my problem occurred. My rom is different and so I still need to update it.
    Thanks
    I wanted to mark your answer helpful too but I didn't know that I could only put it for 2 answers. Sorry
    That was good advice by G-N and s/he is correct about it. Unfortunately, ASC allows only 2 "helpful" and 1 "correct" marks per thread.

  • I have clicked the Apple  Software Update,a window pops up with Failed to check for updates.The operation couldn t be completed. Operation not permitted.This only occurring now did not happen previously.I am using 10.7.4,on a Mbp Pro.

    I have clicked the Apple > Software Update,a window pops up with >Failed to check for updates.
    The operation could not completed. >Operation not permitted. This is only occuring now.It did not happen
    before.The Apple store in Sydney NSW Australia only reinstalled 10.7.4 Lion yesterday.I have downloaded my
    Itunes song and reinstalled Intego antivirus.Will somebody please advise me what to do.It is 4:03 PM Saturday
    here in Koolewong.
                        richard.

    Uninstall Intego...you don't need it.

  • I installed an software Update on my MacBook Pro and after that my laptop wont reboot passed the gray screen?

    After installing a software update on my Macbook Pro, it would not reboot passed the gray screen and then would shut down.

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
         a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
    Step 6
    Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 7
    Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
    Step 8
    This step applies only to a Mac Pro tower, not to any other model. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
    Step 9
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

  • I have update to windows 8 pro

    I have already windows 7 home premium, and I update to windows 8 pro,
    I have one problem with my DVD BLue Ray disc; my machine does t works with the new software windows 8 pro
    Some one can Help me to find the correct software for my computer, to works the dvd blue ray?
    My data computer is:
    Qosmio
    X505 SP80 17M
    Series number
    XXXXXXXXX
    I need a software for update the dvd blue ray to windows 8
    [Moderator edit to remove serial number.]

    Windows 8 isn't supported on that model unfortunately.
    Toshiba Windows 8 Upgrade Information Document ID: 98083978 Posted Date: 2012-08-31 Last Updated: 20...
    - Peter

  • Software Updater on windows 7

    I own an N97 and did the ovi suite installation on my toshiba Q0smo X505-Q850 64 bit system. but when I try to update the software on my phone or even just the software, I  get a message that says that my operating system is not supported. Please what should I do.    SUNNY.

    confirmed it´s also not working on my P-B 32bit ultimate win7 es ver. the NSU is not support this machine only u have left one option just go to ur mobile menu->control panle->telephone->and use built-in software updater. or try it on xp,vista machine.
    Nokia Software Updater
    Requires: Windows Vista or XP, USB cable to connect your device to your PC.
    Message Edited by imx2 on 28-Dec-2009 02:44 PM
    Message Edited by imx2 on 28-Dec-2009 02:44 PM
    Message Edited by imx2 on 28-Dec-2009 02:45 PM
    ¨Arm yourself because no one else here will save you¨

  • Trying to do a software update, but my macbook pro does nothing after it prompts me to restart

    I am trying to do a software update on my Macbook Pro so I can update the new iTunes so I can start using my new iPod. Every time I go through the process of the computer searching for updates and confirming there are software updates, then being prompted to restart my computer, it does nothing. After my Macbook Pro turns on again, nothing pops up and I go into my information and it says I still have the old software. Nothing is prompting me to do the update after I restart my computer, or beforehand for that matter. HELP.

    Are you really still running 10.6.2? If Software Update isn't working for you, you may want to try using the 10.6.8 combo update found here -->> http://support.apple.com/kb/DL1399.
    If that doesn't work, call back...
    Clinton

  • I interrupted a software update and my macbook pro will not boot. I have tried to reboot using the startup disc, I have tried to verify the disc, and repair the disc. It tells me I need to erase and reformat the hard drive then reinstall the operating sys

    I interrupted a software update and my macbook pro will not boot. I have tried to reboot using the startup disc, I have tried to verify the disc, and repair the disc. It tells me I need to erase and reformat the hard drive then reinstall the operating system. I do not have a back up of all my applications, my garageband music and other things. I also do not have time capsule set up on this machine, but I do have a 2 TB time capsule.
    Is there anyway to back up this corrupted drive so I can restore my applications later?

    There's an old saying.  If you don't have a backup disc, then there must be nothing important to backup.  That's just lesson #1.  Lesson #2 is to never interrupt a software update.  Not a good thing.
    OK, I'm sure you know this.  It just upsets me to read your story, knowing you have a lot of important stuff on your hard drive, and didn't use time machine.
    You're pretty much in a bad place.  My only hope for you is to boot to your Installation Disc, then using disk utility see if you can save the internal hard drive (by fixing what can be fixed).  You might be able to see your user folder and some of your apps.  I wouldn't even consider copying the library, because who knows what's been corrupted in there.
    Good luck.

  • HT1338 Why every time I get an Apple software update for my MacBook Pro click on it but at never opens up it always error

    Why when I get a software update for my MacBook Pro i click on it for some reason it never connects to the server I can never get my software update is anyone else having this problem? if so what do I do? i have the 2007 macbook pro Mountain lion 10.8.2

    Start up from that Mac OS X 10.4 disc you have.  Insert disc in optical drive and start up with the C key held down.  On the first Installer screen, from the menu bar, under Utilities, select to run Disk Utility.
    In Disk Utility, select your startup volume (usually "Macintosh HD") in the sidebar and go to the First Aid tab.  Run Verify Disk.  If it reports a problem, that may be the reason for your long-term difficulties. You hard drive volume has data corruption. 
    You can try Repair Disk in Disk Utility.  However, it would be a very good idea to have a backup of the data on that disk, in case the attempt to repair makes the problem worse.

  • Thunderbird can't sendmail on yahoo email server after updating to Windows 7 Pro on an ASUS BP1AD PC. Tried Thunderbird 31.2 & 24.6 configured as IMAP.

    After recently updating to Windows 7 Pro on an ASUS BP1AD PC, I can receive email but NOT send using yahoo mail server. I am configure to use IMAP. Other email servers/accounts do not have this problem. The exact error message I get is an alert which states: "An error occurred while sending mail. The mail server responded: From address not verified - see http://help.yahoo.com/I/us/yahoo/mail/manage/sendfrom-07.html. Please verify that your email address is correct in your Mail preferences and try again" If my email address in Thunderbird is good enough to receive messages iwhat's up with sending. Is there something obvious I am missing?

    When you send mail the field you mention is used to populate the "ReplyTo: fild in the mail header. Otherwise it has no purpose and setting it to nothing will also work.
    Yahoo are obviously checking that field as you send mail. that is points to a valid address, and I have a sneaking suspicion that is might be required to point to your yahoo mail account.
    Historically the"Nigerian" type scam emails used a replyto address completely different from the one used to send the mail. So even if the sending account was closed down they still got the replies. The mail quite commonly originated in Yahoo and replied to Hotmail accounts. So I guess they have a check to try and discourage that legitimate, but undesirable from their perspective, use.

  • What are the problems in N95 software update V20?...

    what are the problems in N95 software update V20?
    and is the mean of UPnP and USB Mass Storage and what are thier uses?
    THANKS EVERYBODY FOR YOUR ANSWERS..

    19-Dec-2007 11:15 PM
    tito_6646 wrote:
    what are the problems in N95 software update V20?
    and is the mean of UPnP and USB Mass Storage and what are thier uses?
    THANKS EVERYBODY FOR YOUR ANSWERS..
    Read this topic its about them: /discussions/board/message?board.id=swupdate&message.id=24327#M24327
    USB Mass Storage is the possibility to use your phone as a simple flash memory without the need of any additional drivers and apps, just plug it to you PC and write/read/copy the data.
    UPnP is a something like a Wi-Fi protocol which allows u to view you images or listen to music on a compatible devices (PC, TV, music centers etc) over the air.

  • Desktop software in my Windows Vista 64-bit OS

    i cant download the  desktop software in my Windows Vista 64-bit OS. it says its not compatible.what will i do?

    Which software did you try to download? I am pretty sure that 6.1 is compatible.

  • I tried to update the latest software update for my MacBook pro (which was on 10/12) and after it started to update it restarted like normal but when it started back up it was running painfully slow and none oft programs will open.They all quit unexpectal

    I tried to update the latest software update for my MacBook pro (which was on 10/12) and after it started to update it restarted like normal but when it started back up it was running painfully slow and none oft programs will open.They all quit unexpectedly. iTunes microsoft word all of them quit unexpectedly. Help!

    Exact same problem with my 2010 MBP 2.4ghz 4gb ram 10.6.8. iTunes said update was needed, Software Update ran with various updates including a security update, truthfully didn't pay much attention, I always install the Apple updates. After the restart it took 3-4 times longer than normal to get to the login screen, same to get to the desktop but I'm familiar with that occurring on update restarts. Unfortunately it got worse from there. Performed a full shutdown and startup. Same long boot.  After the desktop finally loads every mouse button press received a 2 minute beachball. I use menu-meters and both processors are under 10%. Waited a few minutes for disk utilities to launch, repair permissions estimates 3 hours for a typical <10 minute process. Activity monitor shows nothing over 10% CPU most of the time however ReportCrash pops to the top often. Any suggestions would be greatly appreciated. BTW zero problems until this update.

  • About Nokia Software Updater for windows 7

    i need Nokia Software Updater for windiws 7................ plz upload Nokia Software Updater for windows 7

    See /discussions/board/message?board.id=swupdate&threa​d.id=67220

  • HT2305 I need helping with re-installing Apple Software Update for Windows Vista, please. :)

    Hello,  I will get my new Ipad 2 32GB on April, so I will have enjoying with Ipad with bringing up my excitement on Ipad.   I need re-installing Apple Software Update for Windows Vista 32bit, but I did install iTunes, Safari, and Iphone configuration utility that it did not included Apple Software Update software.   Please send me download file of Apple Software Update, immediate.   Thanks
    I do not certain about Ipad configuration utility, would be working with Iphone configuration utility?
    david

    I went into checking with Apple Software Update then I clicked Control Panel  - "Repair"  It was restored to start menu,  thank you much  thumb up to b noir       Big Helping me!  David

Maybe you are looking for

  • Photos taken on iPhone are not showing up in my photo stream so not appearing on ipad

    I took photos on my iPhone yesterday and tried to view on the ipad but did not show up and also are not in my photo stream. Tried turning wifi off and on and resetting the iPhone. Did not help. Any ideas.

  • LocalStorage is not working in indesign cc extension

    Hi All, I planned to store some user preferences for my extension so I thought to use localStorage class to do this but it fails when i closed the extension and next time when open the extension and tries to get the last saved value then it returns N

  • NullPointerException in some forums

    Since the weekend maintenance started, I've been seeing some NullPointerException errors in various forums. Right now, it appears that there are still a few such exceptions coming when you visit the ODBC forum. ODBC Justin

  • Macbook air or Macbook pro with retina?

    I am a college student but do not know which macbook to get. I would be using it for typical things like writing papers and watching netflix or youtube etc. I know the air would be good to have for portability and battery life but I think id be missi

  • CS6 patch tool across layers

    Couldn't find any reference to this elsewhere in the forums. Since getting CS6 I have been puzzled to find that the patch tool in CS6 seemed not to  work across layers whilst doing photo retouching. So I reverted to the other tools to get some work d