N95 software updater download problems

Hi.
With the N95 Nokia Software Update, the phone is recognized and the downloading starts (about 111MB), once the download reach more than 20%, it fails and the connection is lost.. Do you have the firmware downloadable or something easier?
Regards

/discussions/board/message?board.id=topfaq&thread.id=112
 /discussions/board/message?board.id=topfaq&thread.id=23
read these perhaps this will help you  
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Similar Messages

  • X2-00 software update download problem.

    On my phone i'm unable to download the latest software for my x2-00 phone and the latest software is out. Pls, help me on this dn't knw what to do to it.
    Solved!
    Go to Solution.

    Is your phone showing availability of the Update ? If not check thru' the Nokia Suite . If the Nokia Suite also do not show then the reason is ..availability of update depends on Product Code / Region. Also, for Network locked devices, update is possible only after an approval from the Operator. Hence, even if Nokia has released an update, it need not be for your particular device. Under such scenario, only thing you can do is wait and keep checking ...

  • What are the problems in N95 software update V20?...

    what are the problems in N95 software update V20?
    and is the mean of UPnP and USB Mass Storage and what are thier uses?
    THANKS EVERYBODY FOR YOUR ANSWERS..

    19-Dec-2007 11:15 PM
    tito_6646 wrote:
    what are the problems in N95 software update V20?
    and is the mean of UPnP and USB Mass Storage and what are thier uses?
    THANKS EVERYBODY FOR YOUR ANSWERS..
    Read this topic its about them: /discussions/board/message?board.id=swupdate&message.id=24327#M24327
    USB Mass Storage is the possibility to use your phone as a simple flash memory without the need of any additional drivers and apps, just plug it to you PC and write/read/copy the data.
    UPnP is a something like a Wi-Fi protocol which allows u to view you images or listen to music on a compatible devices (PC, TV, music centers etc) over the air.

  • HT4623 i was doing a software update downloading ios 6.1 and the phone froze half way through the download i tried to restart the phone by pressing the power button and the home button but its just a apple on the screen. what can i do to fix this??

    i was doing a software update downloading ios 6.1 and the phone froze half way through the download i tried to restart the phone by pressing the power button and the home button but its just a apple on the screen. what can i do to fix this??

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps..
    But... if the Device has been Modified... this will Not necessarily work.

  • Tried to buy Aperture 3 and got an error message Aperture can't be installed on "Macintosh HD" because Mac OS X version 10.7.2 or later is required. You can update Mac OS X using Software Update.  Problem is, I had already updated my IMac to Lion OS

    Tried to buy Aperture 3 and got an error message Aperture can’t be installed on “Macintosh HD” because Mac OS X version 10.7.2 or later is required. You can update Mac OS X using Software Update.  Problem is, I had already updated my IMac to Lion OS

    iPhoto 9.3 requires OS X 10.7.4 now. You can use your actual version of iPhoto or upgrade to Lion (or wait to Mountain Lion)

  • When does Software Update download in the background?

    I work at a school with about 150 Macs. About 50 of them are new imacs with Leopard installed. The default setting is to have software updates download in the background. We have turned that off as 50 machines downloading a 100 meg file at the same time could cause some traffic jams, correct? We download the updates once and install using ARD. My question is, if we forget to turn one off, when does it download? As soon as it is connected to the internet? We have our computers turning on in the morning at 8 and shutting of at 6 pm. When would the software update automatically download in the background? Thanks in advance.
    Message was edited by: Jeff Peach

    I have always noticed that when I boot my machine, software update checks and if anything is available it will download. I have it set to check daily, and I shut my machine down nightly.
    Also it tells you the last time it checked in the preferences.
    Software Update > Preferences
    That should tell you your answer for sure.

  • N95 software update in windows XP Pro 64 Bit will ...

    N95 software update in windows XP Pro 64 Bit will not work
    says O/S not suported
    any walk around or other way to update
    Thanks john

    /discussions/board/message?board.id=swupdate&message.id=23383

  • I cannot download software update, download & install key is grayed out. I have more than enough storage.

    I cannot download software update, download & install key is grayed out. I have more than enough storage.

    Hi,
    Are you connected to a Wi-Fi network? If not this may be the reason why.
    Regards,
    Steve

  • N95 Software Update and Nokia Harrassment

    Hi There,
    I have think Nokia is getting more creative in finding various ways of making money from poor people.
    But the question is will this make them rich or lose customers.
    Look at this story.
    I purchase a Nokia N95 - 8GB from Delhi, India on 29th Feb 2008 and then moved to Sydney last month. I have an HP laptop with Vista Ultimate 64-bit and the latest PC Suite (6.86).
    Initially, I had a problem with connecting N95 to the PC Suite on my laptop. Windows crashed on installing PC Suite and gave a blue screen with the error on WUDFRD.sys. I called the Nokia Careline and they didn't the issue (though the issue is all over internet). They advised me to speak to Microsoft for the same.
    However, the issue got resolved when i installed Vista SP1.
    Which means that Nokia PC Suite does not work with Windows Vista Ultimate 64-bit but works with Vista SP1.
    Day before yesterday, I found out that Nokia has released a new firmware for N95 - 8GB (version 20) so I tried to update it using the Nokia Software Updater. After downloading the latest software and the firmware from the internet, the Nokia Software Updater crashed saying: "Nokia Service Layer Host Process Has Stopped Working" and the update never happened. I looked up the internet and there are many instances of this problem.
    I called the Nokia Careline at 1300 366 733 and to my surprise they said that my internet connection has a problem, though I clearly mentioned that both the firmware and the software update is downloaded from the internet, but he insisted that the server is busy and so I cannot download the update. Really laughable.
    He also diagnosed that because I am using Vista SP1, the software is crashing, I should call Microsoft to downgrade to Vista without SP1. Question is… If I downgrade to Vista Ultimate from SP1, I will not be able to connect to the PC Suite. I upgraded to SP1 because of Nokia PC Suite.
    However, he advised me to go to the Nokia service center and they will be able to update the software.
    Now, this is classic. I reach the Nokia service center and show my mobile and the receipt of purchase. He says it is not covered under warranty because I purchased it India and so I will have to pay $49.50 for the upgrade and he cannot guarantee whether the phone will work after that.
    Firstly, the Nokia Software Updater doesn't work from the Nokia site and then they ask us to pay for it. It is a Nokia Phone which is released less than a year and they do not recognise the phone manufactured by them.
    This raises a few questions on Nokia's work ethics:
    1. Do they test the applications they make available to the public.
    2. Do they want us to pay for even their errors which we test as faulty? They should be paying us for testing for them and the inconvenience caused.
    3. A phone is only to be used in the county of purchase. If you go abroad, buy a new phone.
    If you have faced any similar problems, please share with all of us. I do not think Nokia is listening but we can create our own community to fight against this wrong-doing of Nokia. We buy expensive phones which then are money-minting and money laundering option for Nokia.
    Thanks a ton for listening.
    Shailendra
    Sydney
    edited by Moderator: *Email Removed*
    Message Edited by kladiron on 21-Apr-2008 11:07 AM

    While this is frustrating and as the previous poster has mentioned it is a common problem.
    However, both my desktop machine and my laptop are running Microsoft Windows Vista Ultimate Service Pack one, I am though running the 32-Bit version of Vista becuase it is less hassle with drivers.
    Previously I was running the "gold" version of Vista.
    Other than a small installation problem on my Laptop, I have had no problem updating a large number of handsets with either computer.
    Lets have a look to see if we can resolve the problem or at least get some way forward.
    You are not the only one that has had problems, and I'm not the only one that hasn't had problems. Unfortunately this problem could probably occour under any operating system including windows XP.
    It could be that there is some software conflict on your machine that is causing the services that the updater is using to fail. Sometimes it helps to create a new windows user profile, and use as little background applications as possible, as windows PCs can use millions of hardware combinations, it could be your USB chipset thats causing a problem or some other kind of internal hardware incompatibility - if you have access to another machine perhaps try installing the NSU application on that and trying with a different machine? I know that with Vista x64 - all your drivers have to be signed, do you have any hardware thats showing as in error?
    As for warranty issues, well I'm not able to comment on the Local warranty issues, I know that if you buy a Nikon Camera, with a "Nikon Worldwide Warranty" in Japan, and then return to the UK for example, then Nikon UK wont touch your camera at all if it goes wrong. So Nokia are not the only company that enforce a country rule - its quite possibly because manufacturers do not like grey imports of their products. (even though yours is not a grey import) Just checking the warranty terms on a SonyEricsson handset and a similar clause is listed, but it cites that the internal parts may not be similar to one sold in the country that it was not purchased in, and hence unrepairable in your new country.
    With a Nokia Phone, in the European Union it is EU wide warranty. The terms of the Austrailian Warranty are here: http://www.nokia.com.au/A4521194 however it does say: "This Limited Warranty is only valid and enforceable in the country where you have purchased the Product provided that it is intended for sale in that country."
    A similar line is detailed in the Indian Warraty terms here: http://www.nokia.co.in/A4536240
    I'm not 100% sure but you may be able to get service from an agent in India, if you are willing to mail your handset to an Indian service centre should you not wish to pay for it (although postage may be more than the price you were quoted)
    Previous expierence of Nokia Care Telephone assistance tells me that they will tell you pretty much anything - and like most companies its too easy to blame someone elses product, though its perhaps reassuring that its the same on the other side of the world
    Hope I have been able to help you in some way.
    Shunts...
    I will mostly be communicating with a Nokia E72 Zodium Black
    Nokia E72-1 with Vr 051.018.207.04 Software
    If this post helped... Add some kudos!!

  • Telstra Nokia N95 software update?

    Hi all,
    I recently purchased an N95 from a Telstra shop on 15/05/08, tried to update my firmware, have the latest version of PC suite 6.86.93, the N series PC suite, and the software updater. I've been reading the news on the N95 and Nokia states it's at version 21++ for firmware, doing the *#0000# check my Telstra N95 us coming up with firmware 10.02.006
    Ok so I'm thinking sure, newly bought phone, I just need to update my firmware but that apparently seems to be impossible, everytime I try a firmware update my N95 it's telling me it's on the latest software for that phone.
    Browsing around forum posts it would appear that not all N95's were created equal, I'm thinking Telstra is selling the N95-3, what I would like to know, and emailing Nokia customer service has proven to be quite useless on this matter:
    ie stock standard cut and paste answers without them investigating this particular N95 variant's lack of firmware support, or being proactive in their solutions.
    The response I had from them is you have an N95, the N95 is on version 21 for the firmware, phone companies that sell those phones sometimes have to verify the firmware before it can be put on, here's a link to the software updater, that's all fine, that's all information I could find out on my own too, what i would have liked them to tell me is, what version of firmware has Telstra allowed this phone to be updated to or is this a generic N95-3 lack of firmware love problem and if it is Telstra then do they have a liaison who can tap on the shoulder and say, "hey you know we are way ahead with the updates on firmware, you might want to update things on your end and let our customers keep up with the latest firmware other N95 users out there have access to because this really isn't representing our product at it's best..."
    Or if it's a lack of N95-3 support, then what's being done about it?
    Any other Telstra N95 users out there with this problem?

    13-Jun-2008 11:33 AM
    klink wrote:
    im thinking about going to the local nokia store and requesting a upgrade in firmware for free to try and bypass telstra's lack of progress.
    They won't do it. That would involve removing the network-approved firmware and replacing it with generic firmware.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Software updates download is very  slow

    Today I downloaded 2 software updates; OSX 10.9.5 and Safari 7.1.  The download speed was very slow and erratic.  The activity monitor showed that the process "softwareipdated" was receiving data at anywhere from 1 to 25 kbs.  My DSL connection is never very fast but typically receives 130 to 150 kbs.  Other downloading such as streaming music or video has been normal.  Any ideas why this happened and could this be a symptom of some more fundamental problem?

    It may not be exclusive to Verizon but considering that Apple updates are severely affected on my system, yet my next door neighbor with Comcast has no problems whatsoever, I am 100% confident that Verizon is playing a role in my woes.  In fact, I updated my wife's iPad to iOS 8 OTA on a relative's Xfinity wifi just to get it completed.  Took me about an hour to complete.  I came back home, less than a quarter mile away to my lovely FiOS and boom, 15-20 hour download estimate on my rMBP to update my iPad Mini (which I'm saving for last or at least until this issue is resolved).  Changing my DNS seemed to work briefly on my rMBP but less than a day later my speeds were back to being slow as molasses. At least I had the opportunity to update both my rMBP and iPad Air before the speed took a nosedive again.  Just wish I had updated the Mini too.  I figured the problem was resolved and I'd get a chance to update it later.
    Judging by several posts I found online (links to two examples posted below), I see I'm not alone in thinking something funny is going on between Apple and Verizon.  I won't refute your claim that it is also affecting other providers, because your experience sounds pretty close to mine, but everyone I've encountered with problems in this area has FiOS. Folks around me who subscribe to other ISP's seem fine.  The link below to the discussion on dslreports (2nd link) is particularly telling because I read it after trying various troubleshooting steps and was surprised by the number of people who posted in that thread that had identical issues and troubleshooting experiences as me.  Several people also mentioned that the problem disappeared after they connected to Apple update through a VPN.
    I assumed it was primarily on the East Coast because I have relatives in the West and Midwest with FiOS who have not had any issues.
    I called Verizon but that was about as useful as your experience.  They didn't even bother pointing fingers.  They simply said "if everything else works then I'm getting what I pay for".  I promptly replied that as an almost exclusively Apple household, I am most certainly not getting what I pay for if I can't upgrade my software, apply security patches or use my Apple streaming devices.  Unfortunately, no one seems interested in fixing the issue, so we're left to find our own solutions.
    And that's exactly what I did roughly an hour ago.  Comcast will be out to swap my equipment and service in 14 days.  Problem solved... At least I hope.
    https://discussions.apple.com/thread/6552992
    http://www.dslreports.com/forum/r29544596-FIOS-horrible-Apple-download-speeds.

  • Software update install problem

    Hello, I read about the EFI update problems and did my research on other updates as well, however I didn't find answer to my problem. After Software update checked for new updates (and there was about ten of them, because I did't do any updates for the past moth), I downloaded them and when I chose instal, the program quit uexpectedly. I tried this several times, but got the same message every time. i would be very glad if you could help me ay way. Thaks in advance.

    Anyone got any ideas?

  • Software updates downloads timing out

    I have a 17 in. MPB bought in August 2007 and Im having a problem downloading certain firmware and software updates. they time out...Do I need a faster network? or is there a setting that I can expand my download times? Im thinking about going to at least an N network anyway I have a G right now, will that help?
    Message was edited by: golfermac

    The speed of your Wi-Fi network isn't the problem - even 802.11b wireless is faster than most home internet connections, and even the fastest home internet (with premium pricing from the ISP to match) is slower than 802.11g. The only advantages with N wireless are for local file transfers (e.g. Time Machine backups) and increased range.
    The problem may still be with your ISP/internet connection (just not the one between your computer and your router). Have you tried doing the download(s) elsewhere? Have you tried applying only one update at a time?

  • Can't Restart Computer After Software Update Download.

    I have a PowerBook G4 which I had upgraded back in December to Leopard. After downloading software updates a couple of days ago, I tried to restart my computer and all I got was the Apple logo and the spinning gear. I brought my computer into the local Apple Store and the tech tried to archive and install from an external drive and the computer said there wasn't enough memory to install Leopard though the tech said I had enough RAM installed but that the computer wasn't reading the memory available correctly and that I needed a new memory board at a cost of $350.
    I had a similar thing happen in December 2007 after I downloaded software updates. I brought my computer into the Apple Store. It seemed there was a "kernal panic." Everytime the tech deleted something it kept coming back "to life" and taking up too much "space" though this was different than not having enough RAM (I'm not terrifically computer saavy). I left the computer there for them to look at and a few days later due to whatever they did it was working again.
    When dealing with the current problem a few days ago the tech said it was purely coincidental that the computer stopped working immediately after I downloaded software updates on two different occasions, but I found that very difficult to believe. I put in the installation disc that came with the computer and was able to get through the first steps of installing Tiger without actually beginning to install it, and I saw that the hard drive only had 49mb free and the tech said I needed 51mb to install Leopard. I called an Apple Care tech on the phone and asked if I could reinstall Tiger so that I could at least access the internet and retrieve my emails until I could get the Leopard issue resolved. He said doing so would delete Leopard and all of the documents I had done on it.
    I mentioned I used to have my computer set up so I could access both OS9 and OSX on my computer and asked if that was now possible with Tiger and Leopard. He said I would need to go into the Apple Store and have them hook up my computer via firewire to another computer and boot up in target mode so that I could possibly delete some of the files taking up the memory and have enough room to install Leopard, or failing that could at least partition the hard drive and install Tiger until I could get the Leopard issue resolved.
    I tried the safe boot someone suggested in a previous thread on this topic, but the computer would not boot up. Does anyone have any other ideas to solve this problem without taking the computer into the Apple Store? And how can I prevent this from happening during software updates in the future? I did not have the option with this last software update to choose only one download at a time. Software Update just started downloading what seemed to be one large update.
    Thanks in advance for any help or illumination anyone can provide.

    Kristin,
    I'm having similar problem after upgrade on my imac. Hangs with white screen after logging out. Have to press/hold pwr button to shut off, then press to turn on.
    I have a LaCie porsche ext hard drive attached by usb. Should I unplug this and try reinstalling mavericks? I didn't remove ext hd during the upgrade, was I supposed too?
    Thanks,
    chris

  • Apple Software Update download is SLOW...

    Hi everyone, I've been experiencing VERY slow download speeds from Apple's Software Update throughout the weekend. I'm on a DSL line, no firewalls, and am getting normal performance at other sites/servers, but downloads from Apple are coming in at sub-dialup speeds.
    The downloads start fine, then quickly taper off from 120 Kbps or so down to 5-6 Kbps, within just a few seconds. The problem occurs whether I use Software Update or try to access a file directly from Apple's Support Downloads page. iTunes app updates seem to have the same issue.
    Any suggestions would be most welcome!

    I'm not quite sure exactly what fixed the issue, but I did a complete reset and reconfig on my Linksys router and set up the connection to my ISP/DSL provider, and it seems to have improved. Never did track down the specific issue, though. I'd be curious if anyone is able to identify the cause.
    When I was troubleshooting, I switched to a direct DSL connection via my Ethernet port, and got full speed downloads from Apple, so the wireless connection was definitely the issue for me....
    Good luck all!

Maybe you are looking for

  • Using a ommand to generate more than one row of data in utl file

    Hi Guys This might be a pretty long one. But I require help with regards to using outer and inner loops within my code. Here is the task: Each account involved with the DCA Allocation has an entry in the DCAACCOUNTALLOCATION table to track its progre

  • How to get ADF UI Component value in managed bean

    JDev version 11.1.1.1.3.0 I have written a managed bean method and calling that method on valueChangeEvent of a Select boolean Checkbox ADF Component. I want to retreive the value of some other component located in the same page as the checkbox. I ne

  • Accessing Secured Web Services fromPL/SQL  Code.

    Hi , This is an urgent requirement.We need to call a Web Sercured which is secured(That we need Authenticate using Digital Signatures).I don't how to call a Secured web service from PL/SQL code.with java it is possible. Can anyone help me in confogur

  • New vlan creating problem in FWSM Context

    Hi, We need to add a new IP range in the Network.  In my network there are lot of Context in FWSM.  Now to add a new network, I have created a new vlan and allowed to FWSM and same created in Context.  but the vlan is not getting up in FWSM and Conte

  • Menu Button from sub menu to main menu (transition movie in the way.)

    In the general tab of the disc menu I set the menu button to go to the main menu. When I click "menu" on my remote in simulation from a sub menu I expect it to return me to the the main menu. However, clicking menu from a sub menu automatically bring