N95 time and data loss after shutdown

Hi! I own an unlocked N95 mobile phone with firmware version 12.0.013. The problem is that after shutdown and restarts the time and date is lost. I have disabled the option to get the time from the network operator. I have read on other forums that many other users have this problem too. Is this hardware or a firmware problem? If it's a firmware problem, when can I expect a firmware update that will fix it? My second question: are there different firmware versions for each language, because the T9 dictionary is very unusefull in the Romanian language. Many frequent words are not recognized, other are misspell. Does a firmware include an updated dictionary too? In advance, thank you very match.

Hi,
I have the same problem. Am also on firmware V12.0.0.13 (what ever it is).
I dont know exactly when my problem with lossing the date and time started but I dont think it was after i changed firmware.
I think the problem started when I had to formated my phone. It was running slow and getting temprimental. In fact am sure the date and time loss thing all started after I formated the phone.
The date and time is the only info I loss when I remove the battery every thing else is ok.

Similar Messages

Unable to reset time and date after a software upgrade

unable to reset the time and date after a software upgrade on the TV

hello
I'm having a similar problem with my macbook. I just did a software update and now I can't get onto my internet. I checked the network diagnostics and the connection is fine, except when i click on the safari icon nothing happens.
Can anyone help with this?
Thanks!

HT4623 After updated to iOS 7.1.1, my iPad went wrong with time and date. How can I solve this?

I have updated my iPad mini to iOS 7.1.1 recently. After updated, it went wrong with time and date even I tried to restart it or set manual time/date or set auto time/date. How can I solve this problem?

Hello Phirum OL,
Here is an article that will help you adjust the date and time settings on your iPad:
iOS: Troubleshooting issues with date and time
http://support.apple.com/kb/ts3920
Learn the steps to take if your device has any of the following issues with the date and time.
Incorrect date or time
Wrong time zone being set automatically
Issues related to automatically switching with daylight savings time
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Why my atv can't set time and date after restoring it using itunes ?

when my atv restarting after I restored it using iTunes, it can't set the time and date.
the atv is connected to the net by wi - fi.
when I try to sign in using my apple id, I get a massage that the password is incorrect.
I have apple tv with ios 7.

The network and signal test on device won't give the full picture, for that you need a network report. Go to istumbler, netstumbler or similar, that will show true signal strength as well as any nose detected. You can also try Ethernet to help rule out WiFi issues.

Nokia 6230i forgetting time and date after 1sec ba...

Im used to that my 6230i and other nokia phones remember time and date after a sim card switch. The 6230i has now however started to forget time and date after sim card switch or just 1 sec battery removal.
What is the problem and how can it be fixed?
Thanks

Hi heraldo
There is I think a capacitor used to hold sufficient charge and this may now have failed. Entry level Nokia phones no longer retain time and date at all if battery removed.
Is your phone still under warranty?
Happy to have helped forum in a small way with a Support Ratio = 37.0

Iphone 3 loss of correct time and date

I have lost the correct time and date on my iphone 3 os 4.2.1 Cant reset by reloading world clock. Cant afford to lose data. Wont synch with computer or itunes because incorrect time. Icloud not available on this model. So how do I reset date and time? Any ideas please?

Hi J.Walsh1,
Welcome to the Apple Support Communities!
I understand that you would like help setting the correct date and time on your iPhone 3 running iOS 4. Please refer to the Date and Time section of the attached iOS 4 User Guide (page 198) for assistance.
manuals.info.apple.com/MANUALS/1000/MA1539/en_US/iPhone_iOS4_User_Guide.pdf
Best regards,
Joe

When changing appointment on outlook after time they back on original time and date

I have user that when makes a change to a meeting and sends the update to the recipients, they get the new meeting request and it updates on their calendar with the correct time and date. Then for
a brief time or past day the senders calendar will show the change then disappear and the original time and date pop back up again on all users get the meeting.
Time zone on all pc's same, date/hour correctly.
All with windows 7 + Outlook 2010 (+ sp1, full update).
I have Exchange 2013
any help and tips will be appreciate
Thank's

Hi Rdanny,
Do you mean both Organizer and Participants' meeting back on original time and date?
Does the Organizer give others delegation permission?
Does this issue always occur or just once?
How about changing time in OWA? If you didn't try it, please try to change the meeting time in OWA for testing.
If in OWA, this issue disappeared, it seems an issue on the Outlook client side.
I suggest run Outlook under safe mode to avoid some AVs and add-ins.
I suggest try to re-create the Organizer's profile to refresh the caches.
Also try to check whether there is any related error message in the App Log.
Thanks
Mavis
Mavis Huang
TechNet Community Support

I have to reset time and date after booting

My mac pro cannot hold date and time.
so far, I have replaced the pram battery and done the pram reset several times.
at first i noticed that the sys pref panes were unlocked when I went in to change the time and date but I have since cured that in sys pref/security.
the governing factor seems to be wetherr or npt is a revoot or completely cold boot (mains power switched completely off)
the expected message comes up i.e. " your system clock is set to a time and date before 1.1.2008 some progs may bave erratically blah blah "
the actual time has reset to 1.1.2001 ( dont know if that is significant but mentioned it just in case).
So, if i just shut the machine down and then boot it up again, no probs
if i restart, no probs
shut down and pull the plug ?? 1dt, Jan 2001
would appreciate some advice

Click here and ask. If they tell you to call, and they probably will, accept that.
(123024)

After updating my time and date is stuck on the time it was updated and the current time is overlapping that. How do I fix this??

My time and date is stuck but the current time is overlapping the old date. I tried turning it off:(

For how long? The update process takes time.

What cause Macbook Air A1237 time and date always return from an older date when it restarts? I have tried to reset its PRAM and still it has the same issue.

So here is the story,
1. First, this Macbook Air A1237 always display the wrong date and time every time I open it after shutdown.
2. The Battery always in zero percent and not charging at all.and the magsafe always in color orange.
*also the battery displays the colored black plug that states it was plug in using the power cord.
I need help on how to fix this issues.I'm hoping for your kind assistance.
Grazie Mille!
Ciao Ciao!
Regards,
Freddierick Llarina

Hi,
Had similar issue with the same model. It works with power adapter plugged in, but not with battery alone.
You need to get the battery replaced.
Cheers,
Clarence

RE: Time and Date Changed by itself

The date and time will change to the wrong one automatically especially after the batt died. This repeated itself regardless on how many times i readjust the time and date to the right one. Someone please help me.

I had the same problem today. I also have the iPod 4g, no problems up until today. First make sure you calender is set to "Gregorian, you can do this by going to Settings --> General --> International, and you will see the calender options, mark Gregorian. Still didn't work? Try this: I experimented a little, and what i did was: First, I went to Settings --> General --> Date and Time --> Set Date & Time (before doing this make sure you're in the correct time zone) and here you can change the time and date. But, if it changes automatically, go to the date, and you may have the same problem here, but here's what i did. I couldn't change the month, or day, but i could change the year. Change the year to 2011, and then all the other options should come up. Hope this helped!

Why is my macpro reseted time and date?

Ok,eventually my macpro reseted his date and time to something about 2001... The point is,that i bought this laptop from a friend few months ago, and i even forgot to ask for a login password,and after that and didnt even consider reseting users. The problem with the time and date change,came another problem,i cant even use safari regulary,on sites such is facebook,or even apple .com,without getting a verification security verisign,without blocking the site that i am trying to get in to. Only way is to "trust" that site is manually sign it as "trusted" with your login and a password from your mac. Which i dont know,even my friend dont know the password,the one that i bought it from. Just to make some things straight,its not stolen,i bought it from an original owner,no matter how awkward this situation looks like. Thanks in advance for a any ideas.

Hi all
I have the same problem. When I put the touch to sleep, it seams that during the sleep phase, the time stands still and after power it on again, the time & date is reseted to the default settings.
Hope someone have an idea or a solution for this problem.
Cheers, istvan72

Help - EXIF time and date not working correctly

I am a long time Lightroom user and am trying out Aperture 2.1. I like it a lot but I just found a serious problem. I'm importing some old photos into my Aperture library, by referencing the files in an existing folder. The time and date for some of the files gets messed up. When I view these files in LR the time and date is fine. When I look at the "date created" in the Finder, the time is also messed up. For a photo shoot I did in Europe, the time for some images has the right date & time when converted to US time, but for some images it has the right date & time but as if it were in the US time zone. The files are all Nikon NEFs.
Also, when I view the files in the Aperture import dialog box they are in the right order. But when they get imported and I'm looking at them in Aperture they are in the wrong order.

OK, I give up. Turns out that after one successful import where the dates were ok, subsequent imports have the dates messed up again - whether in Quick or Normal mode. I also tried importing to a new collection, and also tried importing after rebuilding the library (via command-option click in the dock). Still hving this problem.

Time and Date Wont change

Help!!! I have a Palm z22 and everything works great except the time and date will not budge...I called customer service and they had me do a hard reset but it didnt fix the problem. I am at a loss somethiing so little but so annoying...If anyone can help please do..My next step is to send it back to be repaired, unless someone knows a quick fix or mqaqybe something I havnt done..The Z22 is brand new out of the oackage only 1 week ago.
Post relates to: Palm Z22

I have gone through the Manuel and I have been through this whole website. Nothing regarding time not working and how to fix it. I have attempted to I set the time several times and it doesn't work I have been in Preferences and tried to check the time zone/daylight savings time and several other things that may affect it to no avail. I have like I said tried a hard reset deleting everything and then hotsyncing again. I am at a loss. Is there something I should download? Maybe try a hard reset again? I am not a computer wiz this is my first palm pilot so I am lost.
Post relates to: Palm Z22

Importing video help! Need Time and date to show up on screen...

SOMEBODY HAS TO HAVE AN ANSWER!
Okay, little background... I just got a new Mac book pro lab top. First time apple user. Difficult to learn, but learned fast. I am working with IMovie HD program, got the hang of it. I have a Cannon ZR50 camcorder, mini DVR tape. Camera has DV,S, USB, AV etc.. port outs. Hooked it up to lab top to import video to lab top to edit footage add sound etc... to later burn to DVD via IDVD program
BTW: I used a DV to Firewire cable to load up footage.
PROBLEM I AM HAVING. is when I'm importing my video to the computer, time and date stamp from my camcorder's screen does not show up on Mac screen. It gets lost when importing. How I view it on my camcorder (SHOWING TIME/DATE INFO ON FOOTAGE TAKEN) is how I would like to view it after importing it to lab top to later edit ad sound tracks etc... If I hook up my camcorder to a VHS or TV, to record on tape of footage taken, Time/Date stamp of footage shows up and records on tape with no problem.
I spoke with a lot of people on this issue. Everyone refers me to someone else. I can't get an answer for something in my eyes is so simple. They all said " Why would you want the time and date stamp to show up on your footage anyway" Well I would like it to be that way. Topic got down to three things that might solve problem. 1. Need better video/editing software. 2. Need Digital Analog capture device. 3. Need new camcorder. I've been working on this problem for a day or so. It's getting rough for help. Any information on this problem would be great. If you need any more info on my issue please do not hesitate to Pm me. Thanks

Hi SIZ4SK:
Welcome to discussions!
You can't do that with iMovie but you can with a bit of help from a third party...
What you really need is this free plugin from TriX Software:
DVFileDateCM
http://www.trixsoftware.com/DVFileDateCM.html
Let me know if this helps or not.
Sue

N95 time and data loss after shutdown

Similar Messages

Maybe you are looking for