N95 update, disconected during update and now dead...

HI, just thought i would update phone, connected charger before i started as directed, i was 47 seconds away from it finishing the update and an icon said n95 diconected, so now the computer does not reconise the phone and the phone is black screen. as it wiped the phone to reinstall the new update.
Help, what should i do now

Hi aquaticeye
Unfortunately a visit to a Nokia Care Point is now inevitable.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

IPhone 4 - tried updating with new software and now it's asking me to plug it to iTunes. The problem is that my laptop is dead. Is there anything I can do now? Thank you for help!

iPhone 4 - tried updating with new software and now it's asking me to plug it to iTunes. The problem is that my laptop is dead. Is there anything I can do now?
I Don't know if I can turn it of or do I just leave it and take it to service?
I'd appreciate some advice!

Same thing happened here ~ tech guy at a local authorized Apple repair store said it had something to do with improper backup from which the restore would be made. Still have a phone that asks to be connected to Itunes but won't do anything else . . . frustrated.

I update my iTunes to update my ipad and my computer died during this and now my ipad won't connect it has an iTunes sigh on the screen

I update my iTunes to update my ipad and my computer died during this and now my ipad won't connect it has an iTunes sigh on the screen

Hello Macahoy18,
Thank you for using Apple Support Communities.
For more information, take a look at:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Have a nice day,
Mario

Today i updated my i phone 4 to new update IOS 5.1 and now when incoming calls are coming in my phone is not ringing and i have no click noises on my keypad.

Today i updated my i phone 4 to new update IOS 5.1 and now when incoming calls are coming in my phone is not ringing and i have no click noises on my keypad.Even though i have been into my settings to check if on. can anyone help?

Have you checked your sound prefs after you updated the OS? It's possible they got changed during the update.

I downloaded the latest update for my ipad and now it won't open. the screen shows the itunes icon and a pic of the usb cable

I downloaded the latest update for my ipad and now it won't open. the screen shows the itunes icon and a pic of the usb cable

That message means that you have to restore the iOS software because something went wrong. Follow the instructions here. I hope that you have a backup.
iTunes: Restoring iOS software - Support - Apple

I updated my iTunes Software and now I cant burn CD's anymore.

I need help. I updated my iTunes Software and now I get this:
"The Registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes"
Disc Burner: No Disc Recording software found.
I just reinstalled iTunes when they changed the entire format about a month ago. And I have had Nero for my burning CDs/DVDs for years.
Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
Dell Inc. Inspiron 1525
iTunes 11.0.1.12
QuickTime 7.7.3
FairPlay 2.2.32
Apple Application Support 2.3.2
iPod Updater Library 10.0d2
VoiceOver Kit 1.4.2 (222093/222742)
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.1.3
Apple Mobile Device Driver 1.63.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 002ABA4808C3E488
Current user is not an administrator.
The current local date and time is 2012-12-26 21:12:26.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.1.12 is currently running.
iTunesHelper 11.0.1.12 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: PxHelp20 (2.0.0.0),
No drivers in UpperFilters.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive E: PBDS DVD+-RW DS-8W1P on CDR media at speed 16X.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive E: PBDS DVD+-RW DS-8W1P on CDR media at speed 16X.

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

I updated my iphone tonight and now my texting is crazy. When i text my daughter, it goes to my phone

I updated my iphone tonight and now my texting is crazy. When I text my daughter, the text comes to my iphone.

Hi sigrun from mo,
If you are having a button issue on your iPhone that prevents you from doing further troubleshooting, you may need to have the phone serviced. You may find the following page helpful:
Service Answer Center - iPhone
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Regards,
- Brenden

I updated to 7.1 and now when I plug my phone into the computer, it says there are no pictures??????

I updated to 7.1 and now when I plug my phone into the computer, it says there are no pictures?????? When I have 500 pictures on it!!!!! Im soooooo mad I did the update! Worst decision ever!!!!!!!!!! I am SOOOO ready to leave the IPHONE alone- maybe throw it in the river or lay it on the train tracks. Its been NOTHING BUT TROUBLE since the update!

Just to be clear: Tap on the Photos app to start the app. Then tap on Albums at the bottom of the screen. You might have several albums but only one is named "Camera Roll." Are there photos in that album?
If there are NO photos in the Camera Roll album there are no pictures to import. The remaining albums might have come from a sync with your computer or they might be your PhotoStream.
If there ARE photos in the Camera Roll album, connect your iPhone to your computer and start your camera application on the computer. Your phone should be recognized as a camera.

HT4623 I updated to 7.0 and now my ipod wont play in my car stero. I have reset, bought an itunes song and reset again but nothing is working. Pandora wont play. I can hear it on my phone when I unplug but not anything thru the stero except static. Help!

I updated to 7.0 and now my ipod wont play in my car stero. I have reset, bought an itunes song and reset again but nothing is working. Pandora wont play. I can hear it very slightly in my speakers if I turn up the speakers but it is so faint. It plays thru its own speakers and my radio plays thru my speakers in my car so my its not my speakers.Help! Thank you!

Hi Novagurl2369!
I have an article for you that can provide some helpful troubleshooting steps to address your issue:
No sound through stereo headset1
Inspect the headset jack for debris and clean if necessary.
Connect the headset and make sure the connector is pushed in all the way.
Check the volume setting. Adjust the volume by pressing the volume up and down button on the left side of the iPhone.
If you are trying to listen to music and cannot hear any audio, make sure that the music on iPhone is not paused. Try squeezing the headset microphone to resume playback. Additionally, from the Home screen you can choose iPod > Now Playing, then tap Play.
Make sure the latest version of iTunes is installed on the computer that you are syncing the iPhone with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
Try another Apple headset (some third-party headsets require an adapter to be used with original iPhone).
Try a different song or video.
Check to see if the iPhone alert sounds or other iPhone sound effects exhibit the same audio issues.
Disconnect the headset from the iPhone and see if sound comes from the built-in speaker.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Take care, and thanks for visiting the Apple Support Communities.
-Braden

I updated to new ios and now it is not syncing properly. How can i revert back to the previous installed version?

I updated to new ios and now it is not syncing properly. New songs are not showing up on the ipod display but when I view the device on my computer, they are in the playlist but there is a dashed circle beside the missing songs. It previously synced perfectly before the IOS update. How can i revert back to the previous installed version?

Downgrading the iOS is not supported by Apple.
Try:
Re: What does the gray dotted circle in iTunes mean?
https://discussions.apple.com/thread/4676111?tstart=0\\
Dotted circles next to songs, won't sync, red circle with square?

TS3694 hey everyone.. i have a problem with my 3Gs iphone.. i updated to the ios5 and now when i open it says that i have to connect it with the itunes. when i connect it says that has an error 28 something like that.. can anyone help me to fix it?? Regar

hey everyone.. i have a problem with my 3Gs iphone.. i updated to the ios5 and now when i open it says that i have to connect it with the itunes. when i connect it says that has an error 28 something like that.. can anyone help me to fix it?? Regards

Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors.

Have a macbook pro running 10.8.5. Safari updated a day ago and now it is corrupt and will not open

I have a macbook pro running 10.8.5. Safari updated a day ago and now it is corrupt and will not open. It upgraded to 6.1. What is the best proceedure to get Safari working again?
Thanks

This is the most common problem :
How do I uninstall Glims?
If not that, please include a crash report & test in a new or Guest user account.

Firefox did an automatic update to 6.01, and now my middle mouse button is not working in the browser. It doesn't close tabs, it doesn't open new tabs by middle clicking a link, it doesn't allow me to middle click to scroll the page...

Firefox did an automatic update to 6.01, and now my middle mouse button is not working in the browser. It doesn't close tabs, it doesn't open new tabs by middle clicking a link, it doesn't allow me to middle click to scroll the page..

[BUG FIXED, see "EDIT 2" at the end of my post]
I'm on Firefox 3.6.21, and I got this problem today after a Greasemonkey update (To version 0.9.10, apparently).
Disabling Greasemonkey solved the problem, and re-enabling it reproduced the problem (middle-clicking links to open in new tab did not work, merely highlighted the link).
I should also note that while Greasemonkey was enabled and the bug was affecting me, Ctrl+Click to open links in new tabs was also broken.
I hope this helps!
EDIT: It appears this is a known incompatibility/conflict bug between current versions of Greasemonkey and Tab Mix Plus. Read more here:
https://github.com/greasemonkey/greasemonkey/issues/1406
EDIT 2: GREASEMONKEY HAS NOW BEEN UPDATED with a workaround to fix the problem. Go to https://addons.mozilla.org/en-US/firefox/addon/greasemonkey/versions/ to install the update manually. It hasn't been reviewed by Mozilla yet, so it won't be an automatic update for another day or two. All credit to "cannonfodder" below for noticing this; please mark his post as helpful!

I recently did an update for my iTunes and now when I try to open it, I get an error that says that my data execution prevention is not allowing it to open. How do I fix this issue?

I recently did an update for my iTunes and now when I try to open it, I get an error that says that my data execution prevention is not allowing it to open. How do I fix this issue?

Try updating your QuickTime to the most recent version. Does that clear up the DEP errors in iTunes?

I updated to Firefox 4 and now I get a Firefox has stopped working message whenever I try to load any websites.

I updated to Firefox 4 and now I get a Firefox has stopped working mesage whenever I try to load any websites. I updated my video driver and cleared my history to see if that would help. I looked for a crash ID on the homepage, but the last registered crash is from February. I also tried to open in Firefox safe mode, but the problem continued to occur. I'm not sure what to do next, please help!

Try to (re)install the latest version of FireFTP.
*FireFTP: https://addons.mozilla.org/firefox/addon/fireftp/
* http://kb.mozillazine.org/Profile_backup

N95 update, disconected during update and now dead...

Similar Messages

Maybe you are looking for