N95, updates, maps and going online

Hi
Updated my trusty N95 to V 35.0.002.  Have managed to update maps using latest Ovi suite.  See below for hints)    Have just installed UK maps and English voice and now have 30 days only free navigation. (Just what does happen to my old licence that I paid for 3 yrs?)  'Old' maps was set to go online via WiFi at start up using one of several wifi access points and always worked perfectly.  Now, maps starts and after a few seconds a message comes up saying that there is 'no internet connection, go to Tools" etc. I then go round in a loop where I tell the phone to go online and it tells me that it can't connect.  (This can be during a time when I am connected via a browser to WiFi - ie I have wifi internet access. It also won't connect if I am not already connected via wifi.) My N96 is set up to do exactly the same ( log on via wifi) and manages to log on to wifi by itself.
Any ideas on how to make my N95 connect to the outside world with Maps?
Hints for updating maps.
As can be seen from the forums, Ovi maps are a pain.  I too found this.  My recommendations are:
Uninstall any previous versions of Ovi - it doesn't seem to update properly.
Use something like CCleaner to uninstall anything with Nokia in the title.
Download the latest version of Ovi suite and install.
 This seemed to work for me.
Note:  If you have PC Suite installed and Maploader 3:  This worked for my N96 on my work PC running XP SP3 and is recommended because you can select lots of maps and queue for auto  download and installation.   It doesn't work on my laptop running Vista.  I had to use Ovi and install one map at a time on the Vista system
PC Suite and Maploader 3 running on XP refuses to recognise my N95.
Also, it is possible to download a maps package for both the N95 (nokia_maps_3.01_09wk44_b01_s60_3.1_lm_rom.sis)
and N96
(nokia_maps_3.01_09wk44_b01_s60_3.2_lm_rom.SIS)
from Nokia.  If you try to install using PC Suite to either a N95 or N95, both packages say that they are not supported by either the phone or PC Suite.   So why are they there and how can you install them???

Hi,
If you come out of the Maps application and go to Options > Settings > Connectivity > Destinations > Internet/ WAP Services.
you can then select which access point is used for the various network destinations.
Search for existing Access points and see if you can set your O2 Prepay WAP access point as priority 1 Access Point.
Then within Maps ensure that Internet/WAP Services is the method selected to go online in Options > Tools > Settings > Internet >  Network Destinations.
Cheers
Although i work for Nokia, my opinions are my own!
Got a Maps query? Check our Maps FAQ's

Similar Messages

  • Nokia N8, I updated maps and blocked, does not sta...

    I updated maps and blocked, does not start
    Solved!
    Go to Solution.

    as I can see the problem is caused by the update 2 / 2 anna
    must do a hard reset update 1 / 2 and 2 / 2 anna, then go to nokia store and download "ovi maps" and install
    reappears update 2 / 2 anna, do not update, otherwise the problem will return.

  • Automatic software update stuck and going nowhere

    Had 10.5 on a PPC Macmini, running smoothly, no problems. Ran Software update today and it's stuck on a progress bar now for over an hour installing 10.5. The progress seems stuck 'installing one item' at app 10%. I am tempted to shut down but thought I might get a quick answer here first.
    Peter

    peter stephen wrote:
    Had 10.5 on a PPC Macmini, running smoothly, no problems. Ran Software update today and it's stuck on a progress bar now for over an hour installing 10.5. The progress seems stuck 'installing one item' at app 10%. I am tempted to shut down but thought I might get a quick answer here first.
    Peter
    Was it just one update, or many? Which one is it stuck at?
    Since you are running 10.5.0 there are many updates available, and installing them all at once might be problematical. Nothing should take an hour to install, but if you are installing a dozen or so updates, it's possible to take a long time.
    You might run your activity monitor and see if anything is really happening.

  • N95 Update Maps

    Just updated my N95 with the latest software due to a problem with current software. Noe I can't access the maps on the phone, the GPS appears to be working but the UK map seems to have disappeared.
    Any suggestions?

    27-Mar-2008 01:37 PM
    melch wrote:
    Tried that and I still can't see the map of England
    In Cities folder > diskcache > subfolders of 0-9 and a-g and each of these with subfolders, some have content but most are empty. There is no map of England like in Tomtom just referenced squares.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Listening To Music and Going Online

    Hi,
    Got my ipod touch yesterday and all is working well except one thing. Browsing the web works fine and so does listening to music but only when done separately. If i do them together it will work for a minute or maybe 10 before the music either simply stops playing or the web browser closes and returns to main menu.
    Anyone else noted this problem and is there anyway to make it go away as i like the idea of listening to music whilst surfing the web.

    a known and very disturbing bug, most likely caused by memory overflow.
    send a feedback to apple:
    www.apple.com/feedback/
    and tell them about it to get it fixed as soon as possible.
    it's a firmware issue and as far as I know there's nothing you can do about it right now.

  • Auto-updating files and images online

    Is there a way in Dreamweaver to have the files you are
    working on overwrite your files uploaded on your site, besides
    having to ftp them and overwrite them? Can't seem to find any info
    on it. Thanks.

    how else would you upload your files without ftp?
    I suggest using Dw ftp capabilities and define a site and
    setup the the ftp under remote server then chose your items in your
    local site and click the put button "green up arrow".

  • Non-printing of maps and other website document printing.

    Since an update of Firefox (I don't know which one) I am unable to print maps and other online website documents. The maps comes up onscreen with no difficulty but when I choose "print map" the "print preview" and the actual print is blank. In the past the system printed everything with no difficulty. If I access the Internet with Explorer I can print with no problems.

    Try the '''''reset''''' described here:
    http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer

  • Since the last Firefox update my computer automatically goes online at start up and I do NOT want to do this, so how can I discontinue?

    I've searched through my system preferences and Firefox preferences and both helps and cannot figure out how to prevent the computer from automatically going online (using Firefox) when I start it up. I do not want this to happen because the computer will be online when I am not using it; this poses security problems. In addition, this happened after the latest automatic update of Firefox and makes me wonder if someone is invading my privacy. I only want to go online when I open Firefox.

    Uncheck Edit > Preferences > Store > Show iTunes in the cloud purchases
    The correct way to move iTunes from one computer to another is to copy the ENTIRE iTunes folder from the old computer (or backup of the old computer) to the new computer.  This will make everything in iTunes on the new computer exactly as it was on the old computer.

  • After recent upgrade to IOS 7 i an seeing systems rebooting very frequently. it just goes offline and comeback online after some time. IS this hardware issue or others also facing the same

    After recent upgrade to IOS 7 i an seeing systems rebooting very frequently. it just goes offline and comeback online after some time. IS this hardware issue or others also facing the same

    Hello there, Kishoresaraogi.
    The following Knowledge Base article provides some great steps to troubleshoot your issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Particularly:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Installed the update tonight and now my phone (Lumia 928) won't power up.  I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen.  What's wrong and how do I fix it?  Help!

    Installed the update tonight and now my phone (Lumia 928) won't power up.  I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen.  Tried it 10 times with the same result.  What's wrong and how do I fix it?  Help!

        Oh no Mr.Ected!
    I can see if we can get your phone back on! I understand how important it is to have a phone. Have you tried this to see if we can get it back on? http://vz.to/1DZhteH . If it is still goes to a red Verizon screen and then to black we might need to do a master reset. While the phone is off try this:http://vz.to/1DZhXkU Be mindful this is the last resort because it will erase everything on the phone. If you have done back up assistant in the past you will be able to get you contacts back. Please let me know if you need any more help.
    AmberF_VZW
    Follow us on Twitter @VZWSupport

  • How can I fix my App Store on my iPod. When I go to the App Store and click on updates then click on purchased it won't load up the purchased apps. It says its loading then it flashes black and goes to my home screen. How can I fix it

    My iPod has a glitch in the App Store. When I go to the App Store and click on updates then click on purchased it won't load up my purchased apps it says it is loading then it flashes black and goes to my home screen. How can I fix it??

    Have you udated to iOS 6.0.1?
    Otherwise
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.

  • I changed my apple id and password online, next time i turned on my computer icloud pops up asking for a password with my old apple id.  i enter my password and it doesnt work, how do i change my iCloud id to my updated apple id?

    I changed my apple id and password online.  The next time I turned on my computer, iCloud popped up asking for a password, but displaying my old apple id.  I tried signing in, but I think because it is my old apple id listed it doesnt let me.  Anyone have any idea how I can update the iCloud apple id and password to reflect that of my apple id?

    If the old ID is yours, and if your current ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • How can I check my passcode I updated today and when I am going to reset all content and setting my iPhone 4S they asked me for passcode when I entered the passcode the one I just update too is doesn't want to accept it

    how can I check my passcode I updated today and when I am going to reset all content and setting my iPhone 4S they asked me for passcode when I entered the passcode the one I just update too is doesn't want to accept it

    I have had the same problem with iPad recently not too sure why it happened but if you are completing a full reset anyway the easiest way is the restore via itunes on your computer and then set up a new passcode again. Resetting via itunes doesnt require a passcode so it should go straight through.
    Hope this helps

  • Hi, I've been playing Smurf's village for a year now and just last week, i tried to get into the app but it keeps rejecting and goes back to the main page.  Is there any reason for this?  I've been updating the app everytime and now it's not letting me in

    Hi, I've been playing Smurf's village for a year now and just last week, i tried to get into the app but it keeps rejecting and goes back to the main page.  Is there any reason for this?  I've been updating the app everytime and now it's not letting me in.  Pls advise. Tq

    Reset the device, restart the device, try downloading any other app.
    All of these are basic steps that could have been found by a simple search of the forums as a resolution for the issue.

  • On its own, mac goes online and launches safari. WHY?.

    i have a powermac G5, but am using an ATT dial-up. i know.
    when we wake up the mac,
    more often than not, it immediately starts dialing out, going online and then launching safari.
    anyone else have this problem?

    First off, you might have better luck posting in the correct forum. This is the forum for eMac support. Having stated this, I'll take a stab at your problem. I think it has to do with the way you have configured your Internet access. See this page (specifically question 4) for more information:
    Frequently Asked Questions for PPP Modem Connections
    In short you must do the following:
    1. Choose System Preferences from the Apple menu.
    2. Click the Network icon.
    3. Be sure the Show pop-up menu is set to your modem (the "Configure" menu prior to Mac OS X 10.1), or other dial-up device.
    4. Click the PPP tab.
    5. Click PPP Options.
    6. Uncheck the box marked "Connect automatically when starting TCP/IP applications" option.
    7. Click OK.
    8. Click Apply Now ("Save" prior to Mac OS X 10.1).
    That should do the trick. If not, however, you ought to think about posting your question in the PowerMac forum, or better yet, the Mac OSX forum.
    Best of luck,
    Joe
    iMac Intel Core Duo 20", 2 GB RAM, OWC 300 GB FW HD   Mac OS X (10.4.5)   eMac 1.42GHz, 1 GB RAM; iPod w/ video 30 GB

Maybe you are looking for

  • ClamAV fails to scan for viruses in emails [CLAWS MAIL]

    I've recently switched from Thunderbird to Claws Mail and ran into one small, but annoying, problem. I want to use ClamAV + the clamav extension for claws mail to scan for viruses, however it does seem to have permission problems. clamd is running, u

  • Remove element from xml using dom.

    i want to remove an element from an xml file using dom. i remove the element but the whole content of the file is also deleted. how can i rewrite the file.

  • Dear All

    Hi, Is there any way to change the default margins in PDF print of web template. We can use function but in function we can olny specify footer header page layout and etc... But we can not preset margins. Do you have any idea. Thanks a lot.

  • Mac/pc relinking sucks...missing file extension on mac

    hello I have indd files with linked images, but this images is from mac, and many mac users dont write file extension to files (). I need to open this files on pc and cant relink this files with "relink to folder" function. example: "link1" from mac

  • Approval Preview when the workflow is finished

    Hello, We have implemented the BADI to get multiple level approvals in Shopping Carts. When we display the approvers via Approval Preview the system works fine if the workflow is in process, but when the workflow is finished we donu2019t display anyt