N95 updating problem - cannot identify device

Please can somebody help?
Nokia software can detect it but my N95 cannot be identified
And is updating with NSU tha same?

Ok so I´ve got good news Today I´ve phoned to Nokia and they told me that they have some problems and becasuse of this we cannot update So we should just wait and try in 2 days or so

Similar Messages

Cannot install driver, cannot update driver, cannot uninstall device

Dcannot install driver, cannot update driver, cannot uninstall device7 SB Audigy4 24 bit
Hi,
I have read the faq & tried numerous time all suggested steps, to no avail
In device mgr, I am unable to uninstall the device, services.exe goes to 50-80% cpu usage for hours & hours, without ever uninstalling my SB
If on the other hand, I try to install with one of the recommended driver, it invariably tells that it need to uninstall a previous driver, then it stays at the uninstall full sreen for hours. Oddly enough, device mgr gives me a code 8 (no driver installed)
I need to nuke whatever's left of the driver, something ctzapxx.exe has not been able to help me do so far
I have spent the better part of the last 3 days trying to get this fixed, you guys are my last hope before I reformat
Tks in advance

Thank you for the information, Harry. If you are installing from the HP CD which came with you then let us check with downloading the All-in-One software from the hp website and then check for the result.
First of all you need to uninstall the software which was already installed on your Vista computer , then we need to download the software and install the All-in-One software.
Here are the uninstallation steps to uninstall the software from the computer:
To completely uninstall the software, run the uninstaller at level three using these steps:
1. Turn the All-in-One off and disconnect any USB/Ethernet cable from All-in-One to computer.
2. Insert the all-in-one CD-ROM into the computer. Cancel any installation windows that appear.
3. Click Start on the taskbar and then click Run.
4. In the command box type the following command and press Enter key:
X:\Util\CCC\Uninstall_L3.bat
(X: is the CD-ROM drive letter of that the all-in-one CD-ROM is in)
Follow the above steps to uninstall the All-in-One software and then restart the computer .
Then download the software from the below web link:
full feature software in vista
Click on the above link and open the web page,after you open the above link click on download only button and save the file onto your desktop.
Here are the instructions to install the All-in-One software:
1) Unplug the USB cable from the back of the computer
2) Install HP Software using downloaded file => Double click on downloaded file => Choose Run and follow the onscreen instructions
3) Before starting the installation disable the antivirus and firewall and then proceed with the installation.
4) Plug in the USB cable when it prompts to connect in the midway of installation
Note : It is important that you connect the USB cable only when the software prompts you while you are installing the software.
Once you install the All-in-One software check for the result and let us know.

Media Encoder Update problem - cannot export video

Hi, I just obtained a student license of Premiere Pro CS4, and I have a critical problem, I cannot export any videos.
Every time I go to export a sequence, Premiere reminds me to update the media encoder.
http://img172.imageshack.us/img172/7047/mediaencoderjz6.png
I have done both as instructed, and successfully installed the latest update to media encoder, but Premiere still fails to export any video, or even open Media Encoder. I do not have this problem on my laptop, only on my home computer.
I'm running Windows Vista, I have not installed any previous versions of premiere, my system spec is dual core 3ghz, 4gb ram, nvidia 8600gt.

See:
Support:kb407106 Error: "Encoding Failed. Could not read from the source"
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

N95 updating problem(GPS)

Hi to all.After updating my new Nokia N95 i cannot use the GPS Any solution for this poblem?Thanks...

Hi megadeth_8
In what respect can't you use application, can't open, can't find satellites or can't find maps?
Happy to have helped forum in a small way with a Support Ratio = 37.0

N95 update problems

Hello, I'm from Lithuania, but my phone is from england. So I want to update it.
[img]http://img249.imageshack.us/img249/6578/nokiacn9.jpg[/img]
Nokia software updater show this and don't do anything, and I waiting about three hours for finish
My phone show only NOKIA. What's the problem? Sorry for very bad english language

I had the same problem when trying to upgrade software on my Nokia N95.
Part way through the SoftwareUpdate upgrading my software on the N95 (using Software update 1.4.98en running on Windows XP Pro SP3) it prompted for the "BB5 ADL Loader"driver to be installed.
I eventually found out the problem was caused by "Spybot Search and Destroy" stopping either PC Suite or the Nokia Software Updater installing properly when they were initially installed. To fix this I did the following:
1) Uninstall Spybot Search and Destroy (or at least disable it's services)
2) Uninstall Nokia PC Suite and any associated USB cable drivers
3) Make sure you phone is not connected
4) Reboot the PC
5) Re-install the latest PC Suite for your phone
6) Connect your phone by USB cable (or bluetooth) - and allow drivers to install
7) Run Nokia Software update
This time the drivers should be recognised and auto-install.
Good luck!

Nokia n95 updating problems

i have problems updating my phone to the newest version as it dowloads it ses updating failed then it ses connect you phone straight ti the usb hub behind the p.c after doing it 5 times its still has the same problem what can i do how cam this be solved

Hi,
Thanks for the answers.
At the end, the only option had been to take the mobile to a Nokia Center. So I'm without GPS...
One thing that i don't understand is how Nokia don't change the way of updating the phone firmware, as the actual way don't seem secure...
The technician in the Nokia Center recommended me that the next time it's better that I don't try to update the phone because it fails a lot of times. (Also said that there are no benefits in updating it... I don't agree much with him :-P). But as i have seen on the net, that kind of error happens a lot, leaving the mobile "dead" and the only way to repair it, is sending the mobile to Nokia...
At least the warranty covers it and the repair is for free...
Kind regards,

N95 update problem

Hi i hav just bought N95 with software version (10.0.018) but when i connect it with software updater it shows that there is no software available.however in news the software version 21.... something has been released.so what should i do.

The answer is here:
http://linux.sgms-centre.com/nokiafaq/branded-phones/
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

My iPhone 4 Bluetooth, using ios7, cannot identify any other bluetooth device (even other apple products). Says device not supported. How to solve this problem?

My iPhone 4 Bluetooth, using ios7, cannot identify any other bluetooth device (even other apple products). Says device not supported. How to solve this problem?

Supported Bluetooth Profiles
It is not supposed to detect other Apple products via Bluetooth.

Zen 8G This device cannot start code 10 and firmware update problem

I have read the threads in the forums on the same problem that I am having. It seems that there are few solutions for this and the ones that have been posted I have tried. Basically the problem is this, I made the silly mistake of trying to update the firmware on my Zen 8G since it was listed as a critical update. I downloaded the firmware but it failed and took me to the recovery screen. Instead of working with this, again silly me, I tried to use the Creative recovery tool. This downloaded the firmwary and started rebooting the player. At this point it just hung. I left it on for about 3 hours and nothing happened and it wouldn't turn off so I hit the reset button on the player. Now when I connect it to the computer it recognizes it as a creative zen but if I try to download the firmware the software says the player is not connected when it is. When I check the device driver, even though it shows it as a creative zen it says "This device cannot start code 0"? I have the latest Microsoft device driver loaded and it still doesn't work.
I have tried this on two different computers, one using XP and the other using Vista. I get the same problem with each. It appears to me that the problem is not really with the device driver but somehow with the firmware. However, I am not an expert at this stuff.
If anyone could please help I would appreciate it. This was a gift for my wife for the Christmas of 2007 so it is just out of warranty and the service people won't help.

GRe: Zen 8G This device cannot start code 0 and firmware update problem?Hello Tbg99,
Welcome to Creative forums!
Try booting the player in the recovery mode.
. While the ZEN is off, press and hold down the play/pause button.
2. While holding down the play/push button, push the reset button slowly using a paper clip/pin. You should feel the "click" sound when press it.
3. Slide the On/Off switch towards the power button and hold it down until the recovery boot screen appears.
Choose Clean Up then Reboot. If problem still persists, you may need to format the ZEN but take note that formatting will delete the contents of the device. To format the ZEN, boot the ZEN in the recovery mode again and choose Format this time.

"There is a problem with your device,We're sorry the device you connected may be damaged and cannot be activated for service. "

My problem is after i did a restore on my 32gb ipod touch i now get a error on itunes that says "There is a problem with your device,We're sorry the device you connected may be damaged and cannot be activated for service. " Please help

In the ipad discussion forums there apparently is a HUGE problem with people not being able to update to ios 4.3.3, it apparently locks up their devices and they are also getting the error "there is a problem with your device".... some are reporting the same problem with their ipod touch as well... it looks like it's a global issue
The forum is in the ipad section under the title of "There is a problem with your device".
I have dodged a bullet on this one since i have not updated my ipod's or ipad in the last couple of days.... i will hold off syncing to itunes until this issue is fixed... good luck, and spread the word if you can to get apple to listen

Correct the 2 problems before updating this airport wireless device

Hi, guys.
I want to access my Time Capsule from the internet.
But i already have a router establishing my internet connnection, so i've set it to connect using Ethernet and wireless mode is off.
This setting doesn't show the "share disc over WAN" and i need that. (As far as i can tell). Therefor i have to switch the connection mode from Off (Bridge Mode) to share a public IP - this enables the "share disc over WAN" option.
But TC returns this message to me when updating the device. "Correct the 2 problems before updating this airport wireless device".
I'm confused? Cuz i thought they should mirror my Routers local IP's?
What do i do? Please help, any advice is much appreciated.

The Asus model that you mentioned is definitely a router, so it is handling DHCP services for your network.
If you have the Time Capsule set up in Bridge Mode, I cannot understand why you are getting a message about DHCP address conflicts....since DHCP is turned off when the Time Capsule in Bridge Mode.
Unless....you have tried to change some settings around manually.
It would probably be best to start over and perform a factory default reset on the Time Capsule, then configure it again. The last setting to check before you click Update would be to make sure that the setting for Connection Sharing is set to "Off (Bridge Mode)".
As far as connecting from the Internet....that's another question since everything that I've seen assumes that the Time Capsule is configured as the main router on the network. I cannot recall seeing a setup when the Time Capsule was not the main router on the network, but will check around.

When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

Did you install BC drivers on the Windows side?

HT4972 How to update I phone 4( iOS 4) to the latest version .not only that but updating my old software to a new in a iPhone 4 will it make any problem to the device or loose it's data completely .

How to update I phone 4( iOS 4) to the latest version .not only that but updating my old software to a new in a iPhone 4 will it make any problem to the device or loose it's data completely .

chrissaji1998 wrote:
How to update I phone 4( iOS 4) to the latest version ...
All the Information you need is in the Support Article you posted from.
iOS 4: Updating your device to iOS 5 or later

Software Update cannot identify my Epson Scanner

Update software cannot locate software from the App Store for my Epson Scanner when connected to my MacBook Pro. I updated my mid 2010 MacBook Pro from Snow Leopard to Mountain Lion (Ver.10.8.1 latest). I follow instructions using software update of connecting my Epson Scanner to the computer and selecting update software from the menu. The response is "no updates available". Tried it many times. Following the same procedure with my MacBook Air that I upgraded from Lion to Mt Lion, the store provided a new driver for the Epson Perfection 1650 on the first try so the scanner works. I am also having issues with Office 2011 of not opening certain docs and parts of applicaitons on my MacBook Pro, do not know if the 2 issues are related.

I had the same problem. I ran permissions repair and restarted. No more bogus notifications.
Then...
Sorry, the problem came back. I then went to Apple support and downloaded the Epson Update from there. For some reason the update was not available fron the usual software update but was downloadable from the Apple Support. http://support.apple.com/kb/DL1398
For the last week -- no more annoying pop-ups asking me to update and then not doing anything. Hope this works for you, too.

Mac connects to wifi, but internet doesn't work. Network diagnostics shows problem starts at ISP. All software is updated and all other devices are able to effectively use the wifi source.

Mac connects to wifi, but internet doesn't work. Network diagnostics shows problem starts at ISP. All software is updated and all other devices are able to effectively use the wifi source.

Hi, KK93.
Sometimes a simple power cycle of the router and Mac can resolve the issue. However, try the steps in the article below to troubleshoot the Wi-Fi issue with your MacBook.
Troubleshooting Wi-Fi issues in OS X
http://support.apple.com/kb/HT4628
Also, see the article below to make sure the router setting have been optimized for performance.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Cheers,
Jason

N95 updating problem - cannot identify device

Similar Messages

Maybe you are looking for