N95 V.20 Firmware Not Available (Singapore)

Seen all the forums,all those with product codes that has 054xxxx are unable to update for the time being.
Today i had asked staff from Nokia Care at Singapore,they told me that the latest firmware for N95 is v.12.
Plus,hxxp://www.nokia-asia.com/A4707379,this Nokia-Asia web page doesn't has any N95 latest firmware news.
Any one from Singapore can update their N95?

Why all this meaningless question. I have product code xxxxxx and why isn't the update available for me, and does anyonw know when it's gona be available.
I'm pretty sure no one here has the answer. You just have to wait and se and use the NSU to check when it becomes available.
Look at the thread and several topics. All the same question:
"I have... why isn't it available..."
Stop asking this meaningless question on this forum. You will to 99.999% chans not get answer. Use the NSU and check regulary.
Just my 5 cent...
Use the SEARCH Luke!

Similar Messages

  • N97 firmware not available to everyone

    Hello,
    If there are some nokia officials around .... please forward this to your decision makers!
    Nokia announced the v12 firmware availability:
    <http://europe.nokia.com/get-support-and-software/d​ownload-software/device-software-update/news>
    I own a nokia n97 - RM505 model and I was a long time nokia phone user. The n97 was my last phone that I ever bought from nokia! The way Nokia makes their firmware available is unacceptable. The n97 is unstable with the v11 firmware and I, as an n97 user think I should be able to update the firmware whenever a new firmware is available. 
    I encourage every disatified Nokia to do the same and not buy their products anymore. I'm 1 user, but the sum of the one users make the difference! This firmware policy is simply unacceptable for me!
    One lost customer!
    Didier Wiroth from Luxembourg

    Branding means when someone (a telco typically) does some customization so that the phone software is "special" to them. E.g. it could be that some special logo is displayed as the phone starts up, or shuts down, or there are some extra programs, extra features. Sometimes, features are removed, so that customers cannot use the phone for something that could be detrimental to the telco's revenue (e.g. to disallow VOIP features from working over the GPRS/HSDPA network). These branded phones are bought through telcos, possibly subsidized, possibly tied to a phone contract, etc. But it might also be possible that you could buy an unbranded phone from telcos.
    Note that this is not the same as SIM-locked phones. Phones that are SIM locked means that you can only use the phone with that telco's SIM card. Phones that are not SIM-locked (i.e. SIM free) can still be branded. 

  • Why latest firmware not available for my region?.....

    I have nokia N70 music edition and my firmware version is 5.0705.3.0.1 RM84. This is the latest vesion available for my region. But for europe the firmware version is 5.0737.3.0.1. My google search result, it is possible to instal the 5.0735 version in mobile also, then why nokia is not ready to give the OS for online upgradation......
    I found another mobile which is brought from asia region with europe firmware.... Its working great speed.

    Hi Chiste,
    I don't think Creative Cloud Membership is available at all in Peru based on the Creative Cloud Membership FAQ.
    http://www.adobe.com/products/creativecloud/faq.html
    See the question
    In what countries can I buy a membership to Creative Cloud?
    Also
    Creative Cloud isn’t available where I live. When will it become available?
    We intend to make Creative Cloud as widely available as possible. Adobe will share more details about country availability over time.
    -Dave

  • N95 8GB - Devicescape: Hotspot Framework Not Avail...

    Hi
    I was cleaning some applications including Demo games, etc., on my new N95 8GB.  By mistake I deleted Hotspot Framework. Now, when I restart a phone I am getting message: "Devicescape: Hotspot Framework Not Available"
    How to reinstall it?

    hey, the only way you can install a new language pack is by going to nokia care or talking to your provider about your issue. nokia care will change the language pack for a fee as your phone was not inteneded for the particular region that you want the language from namely poland. it will cost you a fee as this is not generally done, now every time you will update your phone and or reformat it you will lose your langague pack and it will default to the original language pack that the phone came with for your region. make sure that you have receit of purchase if you go to nokia care to get that done but first talk to rogers about your issue. 
    about the other issue i still have no clue. ..did you try to take the battery out for a few mintues and putting it back in and turning on the phone ? see if something changed?  
    Message Edited by radical24 on 08-Feb-2009 01:36 PM
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

  • WRT54GS V6 - Firmware upgrade needed (2.07.1) not available?

    Trying to Install WRE54G V3 to existing WRT54GS V6.
    According to the WRE help screens, I understand that I need at least 2.07.1 firmware in the router (mine is currently @ 1.50.6)
    However, when I go to download the firmware, the latest version available is 1.52.0
    What am I not understanding/missing?  Thanks, George
    P.S> Even though I did download firmware V 1.52, I was not able to 'expand' it as my trial version of Stuffit claimed it could not recognize the file...)

    gasnyder3 wrote:
    Trying to Install WRE54G V3 to existing WRT54GS V6.
    According to the WRE help screens, I understand that I need at least 2.07.1 firmware in the router (mine is currently @ 1.50.6)
    However, when I go to download the firmware, the latest version available is 1.52.0
    What am I not understanding/missing? Thanks, George
    P.S> Even though I did download firmware V 1.52, I was not able to 'expand' it as my trial version of Stuffit claimed it could not recognize the file...)
    What is the model number plus version of your router?
    In your heading you say you have GS ...in your message you say you have a
    G router You also say in your message you are upgrading from G V3 to GS
    v6
    If you have a G router you have to update to the latest G firmware not GS and vis versa

  • Reposting: Ctrl+H option not available after x3650 M4 firmware update

    This post was originally posted on IBM’s developerWorks public forum (https://www.ibm.com/developerworks/community/forums/html/topic?id=77777777-0000-0000-0000-0000149306...) The following is a summary of the post issue and the response.
    Issue:
    After a firmware upgrade (included IMM, HDD and ServerRAID) to my x3650 M5 (Windows 2008 R2 Server) system, the “Ctrl+H” option to enter the WebBIOS Configuration Utility was not available anymore for RAID reconfiguration. The system boots directly into Windows.
    Response:
    The “Ctrl+H” option is only available in the Legacy mode so your system must have the UEFI mode enabled. There are 2 options,
    A – Use the uEFI F1 System Configuration Utility for configuring RAID
    B – Enable back Legacy mode by adding "Legacy Only" at boot order on the 1st step.
    Also, if you have a working Windows installation you could also install the MegaRAID Storage Manager application to manage your array controller via the OS. It is normal behavior to skip the legacy BIOS menus of adapter cards if a UEFI-aware OS is installed.
    The MegaRAID Storage Management (MSM) Application v12.05.03.00 is available at,
    http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5077712
    You may also use the UpdateXpress Installer to perform future driver/firmware upgrades from within the OS as well (or manually download the packages from the FixCentral page for your system type).
    The UpdateXpress is available at,
    http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=serv-xpress

    Hi, 
    You said:
    "D. Lights Effect is a very good feature of 6303 and in my opinion it would be updated as another possibility to select it as Breather Light Effect such as Nokia 5800 XM, due to Silent Profile activated Handset Location assistance facility. User can find the set easily rather making a miss call to find out where the set is?"
    Isn't this the same as setting "light Effects=On" in the settings? Mine "breathes" away happily after a missed call.
    You said
    "J. SMS alert tone selection plays the tone in Level one Sound volume though the selected level is Five bar. it should be corrected in Future update."
    Where are you adjusting this? I can only adjust ringtone volume not SMS alert tones....
    Cheers
    ------ N78 -------

  • N95 - connection not available help!

    can anyone help??
    i have updated to the new firmware and if i try to connect via wireless network or mobile internet i get the message "connection not available"
    i tried to download the settings from nokia and when the text arrives it says unknown message format - cannot open
    any ideas anyone?
    im on o2 contract

    Use the settings wizard located in the tools folder and it will setup your O2 GPRS connections for you amongst other things.
    Useful links: Phone firmware update | Nokia support site

  • 5800 firmware update v60 slide to unlock not avail...

    I updated my 5800 to v60 yesterday and I saw in several fourm that slide to unlock feature is available with this new firmware update. But for me when i press the menu button earlier i used to see the screen get lit for sometime. But after the update I am not seeing it and even the slide to unlock feature is not available. Is there any way to enable this new feature??
    Solved!
    Go to Solution.

    Hi
    I tried updating to v60 through Nokia suite, but just as about the installation is about to start, it says "Cheking if you already have the installation files on your computer" and then i get an error saying something went wrong (with code 12017)
    I tried NSU, PC Suite, Nokia Suite (reinstallation as well), a soft  and a hard reset but im still unable to update to v60, although it is available in the OTA(update via pc) and also in the Nokia Suite.

  • Why 212.12.11 Firmware for E75 not available?

    Why does Latest firmware 212.12.11 not available for users in India? Is there a way to avail the upgrade? I tried through Ovi, Firmware Updater - both of which reported there is no updates available.  
    Why does Latest firmware 212.12.11 not available for users in India? Is there a way to avail the upgrade? I tried through Ovi, Firmware Updater - both of which reported there is no updates available.
    Siva.
    Solved!
    Go to Solution.

    Well, the latest version is 211.12.01, which may explain why 212.12.11 is not available anywhere in the world

  • Lumia 800: Firmware update 12070 not available on ...

    Hi,
    I own a Nokia Lumia 800 on Telus in Canada and yesterday I just discovered the following:
    The update page states that the “Update not available,” with it currently saying that version 12070 “will not be launched for this product code and/or country.”
    I was expecting to get this update like everyone else, this is a big update and every owner of a Lumia 800 should get it. I'm very dissapointed by this.
    Why don't we get the update? wIll we get it? and when?
    Thank you
    Sébastien

    weak_response wrote:
    re:mkr10001. this is your response to the question? why does this forum even exist? even if the update is up to carriers to implement, your answer should be at a minimum respectful. what an arrogant and dismissive remark. it would have been better of you not to respond at all. what a joke. 
    Don't worry, even in Finland, where you would think the update would be quickly available and spread the good news around the world - we wait and wait.... who cares!
    I can not understand that a know fix can take about a month already to be rolled out! 
    Poor! Very poor!

  • N95-1 v21 Firmware review

    I was just wondering what Nokia should include in the next firmware-release after v21 for the nokia n95-1. After I upgraded from v20 to v21 I had many expectations concerning the changelog ([URL="http://www.allaboutsymbian.com/forum/showthread.ph​p?t=58226"]http://www.allaboutsymbian.com/forum/showthread.ph​p?t=58226[/URL]): Flashlite3, faster menu, rotation improvements...
    however, here's a BIG, FAT buglist:
    - Flashlite works fairly good with youtube although quality is worse than with mobitubia or emtube BUT other flashsites as myvideo.de or google video are terribly slow (50% speed, sound not properly synched) AND when resizing the page (to 75 or 50%) only the left quarter of a video is displayed
    - opening menu folders hasn't become faster; only if folders have already been opened and therefore loaded into the RAM the menu seems faster
    - rotation improvements are only noticeable when rotating the screen while displaying pictures or when having zoomed in. in all other situations screen rotation has become even slower (e.g. in the menu, or when having a full active standy with calendar and to do entries) AND when rotating the screen counterclockwise (e.g. with rotateme) there are loads of localization errors (e.g. OPTIONS and BACK are interchanged) and the camera viewfinder mirrors everything; in general, rotation is not very responsive
    - and that's another annoying bug: the device has become less responsive (is this the revenge of the keypress bug??:tongue
    - i'm getting the feeling that the e3 demo has a reduced framerate compared to v20
    - "GPS position acquisition is *much* faster than in V20." - this is simply not true, it still takes around 2 or 3 minutes without A-GPS to lock my position
    - if light sensor is set to minimum, the backlight sometimes is switched off even if I'm in a quite dark ambience (-> I can't see anything for approx. 10 seconds)
    - sometimes WLAN-scanning just goes off involuntarily and, even if I switched it off, the phone displays all available networks
    - standby-time improvements? i didn't realize any. I checked v20 with Nokias energy profiler (switched off everything possible, offline mode, no memory card inserted -> 0.06W) and then v21 (same process, again 0.06W)
    - WLAN wizard has remained the same; if I want to choose e.g. my home wlan "ConnectionPoint" (secure) it is not always displayed in the access point list. then I choose "search for wlan" to find it; everything's alright, "ConnectionPoint" is found but when I choose it, I have to enter the WEP key - extremely annoying!!!
    - a couple of bugs can be found in the music player. the responsibility of the media keys is considerably slow, it takes half a second to e.g. pause - I want it to pause immediately! And, if you push the keys several times in a row it stops the music only after your last push.
    - the volume keys are not switched when changing to landscape mode; it means that when playing back a video you have to press the LEFT volume key while the volume bars rise in the RIGHT direction
    - the browser is not fully developed; when rendering a website, the browser gives you a "first glance" at some parts of the page, but then there's a couple of seconds a white screen after which the browser renders the rest of the page. I don't get it, does the browser get the desktop resolution at first and then tries to allocate every object to the phones' resolution? Tell me.
    - layer ads cannot be closed as they are wandering together with the mouse
    - and lastly, when trying to watch flash vids not on youtube in landscape mode, the browser often crashes.
    I don't think these bugs are related to my device only as there would be no logical reason for this (I mean NSU distributes the same firmware to everyone with n95-1 and I definitely don't have hardware-related issues)
    Okay, enough about bugs. I would like to give my thoughts about what should be included in the next firmware-release:
    - ASR (as seen on n95 8gb v20)
    - everything should be supported by the 3d accelerator, esp. Flashlite 3 (it uses the CPU only), then video playback would work way better
    - page file (no more memory leaks); I'd rather have a temporary slow reaction of the phone while it does memory-eating procedures like videoediting than "out-of-memory" popups
    - there should be an expert's view option in the settings app to have access to more specific settings
    - GPS data should be queried at least each half a second from the chip to have a smoother position tracking. it would also be more accurate, since there wouldn't be such large jumps from one position to another when driving really fast
    - one should be able to switch WLAN completely off, not just the scanning; correct me if I'm wrong, but how can it be possible that even if WLAN is supposedly switched off, the scanning starts so incredibly fast? shouldn't there be a warmup phase of the antenna??
    I hope you guys read it and provide me with answers and opinions!!!

    I have recently installed v 21.0.016. A big concern is that I used to use the "GPS Data" application often, but this has now been removed!?
    1) Any idea where I can find the GPS Data app to re-install?
    2) If not available, which 3rd party apps could show me speed, elevation, coordinates etc?
    As a comment the Maps application is IMHO not as feature rich. I used to be able to plan a route and then start tracking my position on the highlighted route as I progress - this is no longer possible
    Thanks in advance for any insights

  • N95 cannot update firmware in Australia?

    Hi,
    I have a Nokia N95 purchased on 7th August 2008 from Telstra Australia on a 24 mth contract. Firmware is V10.2.006, I would like to update the firmware to the latest version to hopefully iron out a few bugs and generally speed this thing up. However, when trying to update via a PC/USB through the Nokia updater application I keep receiving the message that my firmware is already up to date. It quite obviously is not, research has indiacted it is V21 or later. Can somebody please explain why this service is not available to me?
    Thanks all,
    Smarteee.
    Solved!
    Go to Solution.

    13-Aug-2008 10:01 AM
    smarteee wrote:
    Although a 3rd option has presented itself since my original post and is becoming more attractive - Get my phone unlocked/wiped or hack the phone and change the product code.
    That particular operation cannot be discussed on these forums since it voids your warranty.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Valid device, valid country - Sorry adobe flash lite is not available

    Hi
    I am in South Africa (Vodacom) and using Nokia N95 8GB (latest nokia firmware)
    I have tried installing Flash Lite 3.1 developer edition (but all I get when installing is version 3.0.1(0) on installation. Also not showing in my application folder.
    So I download Adobe Distributable Player 1.1 (from: http://www.flashmobileblog.com/2009/06/18/distributable-player-exansion-29-countries/ and http://www.flashmobileblog.com/2009/06/11/adobe-mobile-packager-1-1/)
    Finally get it installed (SDK and perl 100%)
    So load the "unsigned" SIS file on my phone via Nokia PC Suite
    Run Application
    Needs to connect to Internet (Internet.GRPS access point) to check version
    FAIL.
    At this stage I am not happy with Adobe. I follow all the steps, know that my country is listed, have all the right software installed and NOTHING.
    Please explain to me what else I can do to get a working applicaiton on my N95 8Gb on Vodacom network in South Africa?

    Hi Mucatron
    I did download you fanbase applicaiton.
    Ok here are the messages I get
    1) Open Application:  fanbase needs Adobe Flash Lite to run. Continue?
    2) Adobe Version Checker - Internet.GRPS (default Vodacom APN)
    3) Sorry Adobe Flash Lite is not Available for this device
    I have a Nokia N95 8GB
    V31.0.015
    07-11-08
    RM-320
    I also downloaded the application from here http://download.macromedia.com/pub/labs/distributableplayer/distributableplayer_flashlite_ s60_en.sis and installed via Nokia PC Suite
    It shows version 3.0.1(0) when installing, BUT I can't find where it installed to (not under applications)
    So I can't manually load any new SWF files.
    Please give me more advice please?

  • N81 8GB Phone memory is not available !!!

    I am using N81 8GB. So far I know brand new N81 8GB has 16MB of free internal memory and somewhat 8GB of free external memory (where internal memory in the phone memory and external memory is the memory card.
    Last three months it was asking me “Phone Memory” is out of space whereas I used only 2GB out of 8GB mass memory.  I installed everything in Mass memories. Recently it was asking me , Phone memory is not available. I used “OVI suite” with  cable and found 24MB already used 0(zero) space available. Then I deleted all programme, music, video and  and others from “Mass memory”  and formatted it. Even deleted everything except default program. Then I flashed the Mobile from OVI update suite. Version has changed but found 21MB is occupied out of 24MB. Now tell me what’s the solution to free the spaces?
    I can’t receive more than 3 or 4 music (small) files via Bluetooth. It asks me to free the inbox space. So far I had total 10 text message (SMS) in inbox. Why it should ask me whereas I have enough memory( 6GB) in “Mass Memory” ?
    Is there any solution?
    Solved!
    Go to Solution.

    At last my N81 8GB  Phone memory problem is solved by using the command
    First Step: Format phone (R E S 0 ?)>>>
    *#7370#        
    Second Step:    Factory Reset (R S T 0 ?)>>>
    *#7780#          
    After contact address sync from OVI.com , Now Phone memory is
    7.48MB used
    16.9MB free
    total = 24.4 MB
    Usefull help for N95 and N81 codes:
    *#06# ............ IMEI number (International Mobile Equipment Identity)
    *#0000# ......... Firmware version and date, Phone Model and Operator Variant
    *#92702689# ... Life timer (W A R 0 A N T Y) - Total time your phone has spent sending and receiving calls.
    *#62209526# ... Wireless MAC Address (M A C _ W L A N)
    *#2820# .......... Bluetooth MAC address (B T A 0?)
    *#7370# .......... Format phone (R E S 0 ?)
    *#7780# .......... Factory Reset (R S T 0 ?)
    Thanks for your help that's why I found that code form online.
    Keep Smiling

  • Importing CD's, shows as 'Not Available'

    This problem has plagued me for around a month or so now, and my mrs is driving me nuts moaning she cant upload her new cd's.
    I've tried, read all the 'fixes', performed installs etc.
    I've run a diagnositcs check and pasted it here, if anyone can see where its all gone wrong, any help would be greatly appreciated.
    Just to sumarise, i put in audio CD, iTunes asks to rip it, click ok, it rips some song normally, then just whips through em all really fast. Once it says its 'finished' i check in the music folder and the songs are there, wont play, shows not available in song length section
    Thanks in advance
    Microsoft Windows Vista x64 x64 Home Premium Edition Service Pack 1 (Build 6001)
    XFX78I XFX nForce 780i 3-Way SLI
    iTunes 10.1.1.4
    QuickTime 7.6.9
    FairPlay 1.10.14
    Apple Application Support 1.4.1
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.3.0.69
    Apple Mobile Device Driver 1.52.0.0
    Bonjour 2.0.3.0 (214.3)
    Gracenote SDK 1.8.2.457
    Gracenote MusicID 1.8.2.89
    Gracenote Submit 1.8.2.123
    Gracenote DSP 1.8.2.34
    iTunes Serial Number 1A1B4C214A39803F
    Current user is not an administrator.
    The current local date and time is 2011-01-02 15:42:11.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce GTX 280
    ** External Plug-ins Information **
    No external plug-ins installed.
    iPodService 10.1.1.4 (x64) is currently running.
    iTunesHelper 10.1.1.4 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    ** CD/DVD Drive Tests **
    LowerFilters: AnyDVD (6.7.4.1),
    UpperFilters: GEARAspiWDM (2.2.0.1),
    D: HL-DT-ST DVDRAM GH22LS50, Rev TL01
    Audio CD in drive.
    Found 13 songs on CD, playing time 50:06 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:54:45
    Track 3, start time 07:37:26
    Track 4, start time 11:22:04
    Track 5, start time 14:53:51
    Track 6, start time 19:25:57
    Track 7, start time 23:23:40
    Track 8, start time 26:42:69
    Track 9, start time 30:57:65
    Track 10, start time 34:44:63
    Track 11, start time 39:04:70
    Track 12, start time 42:47:57
    Track 13, start time 45:58:47
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 16 24 32 40 48.
    The drive CDRW speeds are: 4.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.

    XFX78I XFX nForce 780i 3-Way SLI
    Crikey ... that's a brand and model name I'd never seen before.
    Do XFX have a support site with downloads and drivers for your/her model of PC? Checking, because there's newer LG firmware available for the GH22LS50 (rev TL03), but if the PC manufacturer provides their own tweaked versions of firmware and drivers and whatnot, it's best to get that firmware rather than going to (in this case) LG and getting the firmware they supply for the drive.

Maybe you are looking for