N95 V12 upgrade

Does anybody know if Nokia discontinued the V12 upgrade pending improvements to all the "bugs" that have surfaced for so many people that have upgraded?

According to SteveL from AAS, N95 wait for firmware V13, here: http://www.allaboutsymbian.com/news/item/5579_The_Nokia_N95_and_ultra_conver.phpMessage Edited by nj7_ on 14-Jul-200709:53 AM

Similar Messages

N95 v12 and Nokia Maps.

Hi.
I made a "mistake" just after I got my N95 and updated the Maps program. Not the entire firmware since it's not avaliable for my phone yet, just the maps program.
Now I've understood that I used to have the tracking feature before I updated, I don't have that now.
If I run the 12.0.013 update again, will I get the original version of Maps with tracking back?

22-Nov-2007 08:26 AM
lambosam wrote:
Hi pple...
i'm using n95 v12.0.013 ... and i've installed nokia maps ROM upgrade 1.0
&i've downloaded Iran map into my phone using Maploader 1.0(while the newer versions lacks Iran maps!!!)
it took me an hour to download 6.4mb of maps into my n95 ... but when i start using Maps on my device it goes blank when i zoom on iran ... i mean nothing changed after downloading maps ( i tried to do it again to be sure i didn't do any mistakes ... but after completing map download nothing changed again )
what should i do???
my free space on Memory card decreased from 287mb to 233mb after dl,but nothing ...
Thank you...
pleas send me free iran maps for nokia n95 v 10.0.018 15-3-07 ram-159(c7.01)

Possible Problem for US N95 User Upgrading to Firm...

On July 19, 2007 the new firmware version 12.0.013 for Nokia N95 became available through Nokia Software Updater for US product coded N95s. I installed it and only within 1-2 hours my phone messed up. It is now almost unusable. I am trying to figure out whether this problem stems from the new firmware or from another source that occurred by chance immediately after the installation of the firmware. I posted 2 videos on youtube showing the issues.
http://www.youtube.com/watch?v=Kl5NK4aTpy0&;mode=related&search=
http://www.youtube.com/watch?v=-ZEEjyow7bQ
I would like to hear what you think, especially whether you have ever seen or heard the same problem in any firmware version.
Thanks!
mg428

Hi Please read this link as I had exactly the same problem and this is the way i went about solving it. The phone became totally useless and i even got an error code when starting it up. This does work. Tried to link but couldn't get it to work.
Hi All.
On two different N95 when i upgraded the phones these are the problems i experienced and how i solved it. Just to inform you the two phone were set up totally different with totally different software on it but both were upgraded from v10
First of all i made backups onto the memory cards as suggested by Nokia. Don't do this!!!! backup to PC and restore from there.
I then ran the update with no Problems and restored from the memory card. Big problems started. First of all the main screen lost all it's functions and there where no standby shortcuts on the phones. I could get into the menus by pressing the menu keys but even trying to setup the phone from here gave me no results. The standby shortcuts could not be restored at all and i think the problem has to do with the Active standby apps. or Standby mode. Even the two shortcut keys at the bottom of the phone were gone. After which i rebooted the phone. Even worse things happened then the phone then said "Failed to load or Phone load failure. Contact your Phone Retailer"
The way to fix this is to press and hold the ( 3 * and the green answer key ) and then switch the phone on hold these three key until it asks for the country you live in. This formats the phone. Enter all the data asked for that is country, time and date.
Then restore from your memory card and straight away go into your phone settings using the menu key. Go to General setting and load the Factory Settings. After this re-customize your phone and everything works like a charm.
I have had no more problems from then on. Oh and the phone is a lot quicker.
The only problem i've had with the phone from v10 and still in v12 is that i can't choose a ring tone from the memory card. The card holds about 900 songs (2 gig card). The only choice i have is to select no ring tone or to download on. The way i get to choose my ring tone is to copy the song or ring tone to the phones memory remove the mem card select the tune from the phone once i've done this i re insert the mem card and carry on from there.
Hope this is helpful.
Best to you all.
The N95 is a great phone though.Message Edited by hotcat4 on 20-Jul-200706:11 PM

Nokia N95 firmware upgrades

I've got an N95-1 on Vodafone with the product code 0547869 and it's v11.0.026. I've checked on the software updater and it says that there's no updates for it. However Vodafone are absolutely adamant that I should be able to update to either V12 or V20 via the software updater.
As it doesn't seem to be available via the software updater what should I do to get the firmware updated?

22-Mar-2008 06:49 PM
imaginarykitten wrote:
Not based in London so I'm going to have to nmake a 2 hour trek to my closest Care Point.
How much do they charge to do the upgrade?
22-Mar-2008 06:49 PM
imaginarykitten wrote:
Not based in London so I'm going to have to nmake a 2 hour trek to my closest Care Point.
If your phone is under warranty then it should be free.
If my post has helped you please click the white star on the right

N95 firmware upgrade

would anyone happen to know when nokia will release there next firmware upgrade for the n95 i am currently running 12.0.013....just curious, and whats APAC how do u know if your n95 is APAC>.
NOKIA N96 rocks

I thought APAC was the acronym of Asia-Pacific.
* Australia
* Brunei
* Cambodia
* People's Republic of China
(including Hong Kong and Macau)
* Taiwan (Republic of China)
* Fiji
* Guam (U.S. territory)
* Indonesia
* Japan
* Kiribati
* North Korea
* South Korea
* Laos
* Malaysia
* New Zealand
* Northern Marianas (U.S. territory)
* Palau
* Papua New Guinea
* Philippines
* Samoa
* Singapore
* Thailand
* Timor-Leste
* Tonga
* Tuvalu
* Vanuatu
* Vietnam
Ericssson EH 237, Ericsson EH 337, Ericsson GH 388, Siemens S25, Nokia 6210, Nokia 7250, Nokia 6230, Nokia 6280 & O2 Atom , Nokia N95, Nokia 5800 XpressMusic

MAJOR BUG Nokia N95 v12.0.013

After upgrading fm v11, I can't download any ringtones anymore ! :cry:
Vodafone Live -> Ringtones -> NO SUPPORTED RINGTONES FOR YOUR PHONE MODEL
I tried to download from other ringtone-sites: same result!
Greeeetzzz, Henk.
RM-159 / Nokia N95-1 (8Gb)
V 21.0.016 (02.01) / 14-02-08

09-Jul-200701:14 PM
perfectionist wrote:
Please add this one from my side (copied from another thread topic):
Contact Names Not Shown Properly:
1) If You Recieve A Call.. And Lets Say You Live In The UK.. Only A Number Will Be Shown If You Have Saved The Contacts Number As +44778.. Etc - No Contact Name is shown!
But If You've Saved The Number As 0778.. Etc only then the Name will show!!!
2) Now you get a message, it's received in the +44778..Etc format, so if you have stored in the 0778... format, then no contact name is shown!!!
I saw, you posted this also on "Symbian Freak"; don't you've double numbers in your phone, because I don't have this problem.
The only problem with the log I've, is that all the numbers are shown as a mobile number!
Greeeetzzz, Henk.
RM-159 / Nokia N95-1 (8Gb)
V 21.0.016 (02.01) / 14-02-08

N95 V12 firmware withdrawn?

Has V12 firmware been removed from the Nokia update site. Tried updating my N95 this evening and was only offered the same V11 that I already have to reinstall.

It probably hasn't been approved by your network operator yet.
Some networks are much quicker than others at approving new firmware versions.

V11 to V12 Upgrade

Last week I finally shifted my databases from Web/Business up to the new Standard / Premium tiers in preparation for an upgrade to V12 database.
I upgraded on Tuesday and it was ready for the next day - I ran SELECT @@version to confirm I was on V12. I shifted some databases to the much needed S3s (I think I still need an S4!) and just monitored things and all was ok.
This morning, my databases appeared to go offline one by one for a few minutes - so firstly, is that just part of the upgrade process or should I be worried?
The significant thing that I saw is that my Premium 3 server is now logging monitoring stats as it had stopped during and after the upgrade, but worst now it's running at 95%! Is this as expected to do some sort of catch up process?
Edit:
I presumed that this was the final switch over to the new database as most of the databases have had their monitoring stats reset. The P3 also returned back to normal CPU levels - so I presume it was transferring the missing data from the old website to
the new one.
The new concern is that the DB went offline briefly again and the stats are back to 0% again...

Hi,
It is unfortunate that the issue happened again. However, as you have opened a Support Ticket, I am sure that the support engineer will get the issue sorted for you.
I am closing this particular thread, If you have any issues in the future please feel free to open a new thread.
Also, if you could share the support ticket number, I can try and speed up the process.
Regards,
Mekh.

N95 firmware upgrade- camera blur

Hi - I have just upgraded the firmware on my N95, the sat nav now locates faster, however I have a very poor camera, it willnot focus. I have half depressed button to get it to auto focus however it will not focus properly and all photos are exceptionally blurred, so much so that they are wosethan useless - any ideas, if not can I reload the old firmware. PS I have cleaned the lens and it made no difference.

Ever thought or reloading the current firmware (reinstall)?
Ericssson EH 237, Ericsson EH 337, Ericsson GH 388, Siemens S25, Nokia 6210, Nokia 7250, Nokia 6230, Nokia 6280 & O2 Atom , Nokia N95, Nokia 5800 XpressMusic

Azure SQL server v12 upgrade remaining time.

I'm upgrading SQL server to v12 to be able to utilize S3 performance level. Upgrade is running for 28 hours and still not completed. Actually, info in the portal said that it takes up to 24 hours.
Is there any way to determine how much time is needed to complete an upgrade and/or speed up the process? I'm in pretty urgent need of scaling up, but it's locked while server is upgraded.

Hi Ashley,
Just for clarification, you are upgrading a database (logical server) in Azure from V11 to V12?
How long the upgrade takes is depending on the size of your database(s). The larger the database the longer it will take. If it seems the operation is stuck you should file a support ticked through the portal to have the issue being investigated.
Thanks,
Jan

Cable driver fail N95 after upgrade

Hello!
After I upgraded the software I cannot longer connect my phone through cable.
In Device Manager the phone appears as "Wireless communication devices", and the phone as a computer icon with an exclamation mark in it. Removing and reinstalling it gives "Nokia N95 USB Phone Parent" and then "This hardware cannot be installed - An error occurred when installing the driver" (or somnething like that) - "A serious error occurred during installation".
Please advice?

Uninstall all nokia's software from pc, then reinstall again. Try to download nokia's connectivity cable driver from nokia's website.
N8,N97,N96,N86,N95 8GB,N85,5800,N79,N918GB,N82, N81, N93, N80, N73ME, N70, 6680, 6600,5320,5130,7610,7650,,SIE SX1...................

N95 FW upgrade using phone as modem.

Hi!
I have 2MB data plan, and i'm using my n95 to connect my laptop to Internet. Now, if i want to upgrade my phones firmware, is it possible/safe to do it with this connection?
I think the update reboots the phone etc. which will ofcourse kill the connection. Is this a problem?

Be safe, use a cabled network connection to do the ugrade if you have access to one.
As far as I know, the NSU downloads the firmware to the PC, and then installs it to the phone without any network connection being required.
The problem may be that the mode that the phone and PC are connected in, i.e. as a modem, may confuse the installation process.
I know it aint heavy, but you don't want to turn it into a paper weight!!
Some things in life are guaranteed, but can you claim on them?

N95 v30 upgrade: blue message box bug?

I recently upgraded to the latest firmware for my N95.
Now, whenever I copy text (pencil, then left select), the moment the text has copied a message pops up in the top right corner of the screen saying "Copied" inside a box with a blue background.
The same kind of messages pop up when I'm using Nokia Maps, with techy-looking speak inside e.g. GetSatNavPos=1 (I can't remember them exactly but as a programmer they look like internal variables for the Maps program).
As it looks so ugly compared to the rest of the theme (and as the Maps messages are of no help or interest to the user whatsoever) I can't help but wonder if this is a bug - it seems to only have occurred since I installed the BetaLabs Nokia Email client.
My guess is that internal comments in the programs are getting outputted to the screen - anyone else seen this? It makes my 21st century phone look decidedly dodgy!
If this is actually some kind of feature to assure new users their phone is actually doing what it's supposed to be doing, could Nokia perhaps come up with a way of displaying messages that isn't so out-of-keeping with the application/theme?

Yep. Was indeed a "feature" of Nokia Email
Thanks for the heads up.
Definitely a bug as well - tried changing the clock to an impossible time (eg 25:35) and an error message popped up that was wider than the screen!
Uninstalled and whoomp. No more blue boxes.

N95 - v12 firmware, buzz gone

Just updated the firmware on my n95 to the newly released v12 and i have to say that the annoying high-pitched buzz/whine in-call has gone for me.
It was the first thing i noticed when i made a call shortly after.
GPS lock-on from a cold boot (not having had the in-built gps on for a good week or so) was around 70 seconds
The augmented GPS seems to work (my phone knows where i am in a building)
Overall ... the annoying things that have bugged me from day one are gone.
Have to say ... and not many people do this anymore. THANK YOU NOKIA
Seems like you did a decent job in polishing the phone os ... keep it up

10-Jul-200709:22 AM
kevineu wrote:
Me Too!

"Database on server is not currently available" after v12 Upgrade

I have two databases on a database server, for which I initiated the v12 update preview from the Preview Portal. I had access to both databases last night, but now I'm receiving the following error (actual object names removed):
Database '[database]' on server '[server]' is not currently available. Please retry the connection later. If the problem persists, contact customer support, and provide them the session tracing ID of '{401C6B54-173C-43CB-A16F-2AD76D44ABEA}'.
(Microsoft Server Server, Error: 40316).
I tried going through the support purchase plan, but received an error. I'm reluctant to pay for support, as I'm just testing and it seems to be a technical problem on Azure's side.
I am a Bizspark member. It's unclear to me whether this entitles me to a support plan outside of this forum.

Hi Makh,
This is still an issue. Here's the latest tracing ID:
4E50EE26-4260-43CB-9759-6787E31CD45E
I created a second server and was able to create a database on that server that I'm able to connect to, but the server associated with this error is still unavailable. I've tried specifying each of my two databases in the connection string, with no
luck (same error).
Thanks,
Travis

N95 V12 upgrade

Similar Messages

Maybe you are looking for