N95 v20.0.015 hidden menu descovered

i get hidden menu in new firmware by downloading Nstarter
like live tv and others
no_profile_today

no just download this app Nstarter and u will see
its very niceMessage Edited by ahmed25 on 27-Nov-200711:00 PM
no_profile_today

Similar Messages

  • Lockup/reboot problem with N95 v20.0.015

    Hi
    I installed v20.0.015 on a N95 and now the phone regularly locks up completely or restarts for no reason. It's made the phone pretty useless. Has anyone else had this problem?

    I had the very same problem and I have fixed it!
    The problem isn't the phone at all, but a corrupt download of the firmware! NSU will only download firmware if it hasn't already, which is why reflashing your phone doesn't solve the problem! So to fix the problem you have to delete the corrupt files and run NSU again!
    Trouble is, the files are hidden away as system files so you have to unhide them first!
    Here's how to do it all...
    Click "Start", "My Computer", "Tools" then "Folder Options"
    A Folder Options Window will open.
    Click on the "View" Tab, Then under "Advanced settings"
    Check the "Show hidden files and folders" radio and
    uncheck "Hide protected operating system file (Recommended)" box.
    A warning will appear when you uncheck it, don't worry, the files you will be deleting are not system files, but have been marked as such by NSU, so click on "Yes" and then "OK"
    Now navigate to the following location on your Windows hard drive (Usually C: on most PCs)
    Documents and Settings
    All Users
    Application Data
    Nokia
    Nokia Service Layer
    A
    nsl_service_module_00001
    www.dsut.online.nokia.com.oti.caresuite
    Products
    rm-159
    OR copy and paste the following without the quotes into the address bar and press enter!
    "C:\Documents and Settings\All Users\Application Data\Nokia\Nokia Service Layer\A\nsl_service_module_00001\www.dsut.online.nokia.com.oti.caresuite\Products\rm-159"
    Now select all the files shown and delete them!
    That's that, now to re-hide the system files,
    click "Tools" "Folder Options", Click on "View" tab.
    Check the "Do not show hidden files and folders" radio and
    check "Hide protected operating system file (Recommended)" box. Click OK!
    Now run NSU just as you did before! New firmware will download!
    I hope this solves your problem!Message Edited by pjaysnowden on 03-Dec-200712:46 AM
    Message Edited by pjaysnowden on 03-Dec-200712:46 AM
    Message Edited by pjaysnowden on 03-Dec-200712:50 AM

  • N95 V20.0.015 Good but few problems

    I upgraded to the new version V20.0.015 everything is fine but my multimedia menu won't appear like it used to when I slide to reveal the multimedia keys Please help

    i think..but not too sure but it has been left out on this firmware ..you need to check the change log of the update its on here somewhere kind regards akanic

  • N95 v20.0.015 available!!

    It's a available for my product code.
    check here if it's available for yours also.
    Demand paging in the house you'all!!

    04-Dec-200703:59 PM
    cjlawlor wrote:
    Just to let you know v20.0.015 is now available for 0548364 via nokia software updater
    (although the page at http://europe.nokia.com/A4577224 hasn't been updated to reflect this yet).
    Thanks mate.
    Just downloading now - solved an earlier issue with a friends not playing ball.
    Gonna see what this v20 salvation is all about
    Shunts...
    I will mostly be communicating with a Nokia E72 Zodium Black
    Nokia E72-1 with Vr 051.018.207.04 Software
    If this post helped... Add some kudos!!

  • N95, V20.0.015, phone trying to reset itself

    Hi,
    I upgraded my N95 to new version which is V20.0.15. Sometimes while using GPS, or trying to use games it resets itself. But cant open the phone. When its desktop appears, it resets again. To stop this, Im removing the battary, waiting a bit then opening the phone again. Is there anybody facing with this problem? Is there any way to avoid this?
    Regards.

    Hi gyucel
    With reference to GPS do you mean Nokia maps application crashes whilst trying to "calculate route"?
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • New N95 v20.0.015 firmware vs v12.0.013..

    its a battle one more big boom..
    just look at this: http://www.gersbo.dk/2007/11/new-n95-v200015-firmware-actually-lowers-image-quality.html
    comments always welcome.. vaidas
    Nokia N95 v.20.0.15 + 2 Gb microS + RotateMe beta7 + Nokmote beta1+ ShutUp beta1

    i think..but not too sure but it has been left out on this firmware ..you need to check the change log of the update its on here somewhere kind regards akanic

  • Nokia N95 - Software update v20.0.015 for Phone CO...

    I purchased my Nokia N95 in the New York Flagship store in July. The phone hasn't really lived up to it's expectations and has been quite disappointing.
    I have however been given hope with the v20.0.015 software update. I have just gone to update the phone however it is saying that the latest firmware is v12. This phone is unbranded, unlocked and purchased from your flagship store. I would like to know when the new software will be available for the phone CODE:0548763 so I can make my original investment of $812 work like it should have out of the box.

    11-Dec-200711:54 AM
    smoketoomuch wrote:
    I have the same problem...
    My Swedish, unbranded phone 0546674 also only have v.13 available but the other swedish unbranded product codes (0534847, 0536068) have v.20 avalible.
    What´s the thing with my code?
    Yep, the same code as mine and no update.
    Have mailed Nokia about it but no answer, absolutely nothing at all from them.

  • Help!!!Cannot update firmware N95 v20 to v21

    Could anyone help me with this problem
    i've installed NSU and nokia pc suite(all latest..)
    i've plug the my n95(v20), detected by PC suite...
    i run NSU,, detected,,, and downloaded v21 firmware for n95 (112mb)..
    after it finished downloading, when it try to install it.. it says
    "Downloading update failed"
    "internal module error"
    maybe i didnt read the instruction about change profile to general..
    i changed it to general, the problem still the same...
    okay maybe after i didnt change profile there is some file left in my phone.. so i decided to soft n hard reset.... and i connect again... still showing the same problem, after it finished download...
    so i used my other computer(maybe there is some problem with my vista), so i used my XP...
    and it still showing the same problem..
    i've used that msxml4 solution, but it still didnt work...
    Please help me....

    28-Mar-2008 01:07 PM
    blue_panther9_9 wrote:
    Could anyone help me with this problem
    i've installed NSU and nokia pc suite(all latest..)
    i've plug the my n95(v20), detected by PC suite...
    i run NSU,, detected,,, and downloaded v21 firmware for n95 (112mb)..
    after it finished downloading, when it try to install it.. it says
    "Downloading update failed"
    "internal module error"
    maybe i didnt read the instruction about change profile to general..
    i changed it to general, the problem still the same...
    okay maybe after i didnt change profile there is some file left in my phone.. so i decided to soft n hard reset.... and i connect again... still showing the same problem, after it finished download...
    so i used my other computer(maybe there is some problem with my vista), so i used my XP...
    and it still showing the same problem..
    i've used that msxml4 solution, but it still didnt work...
    Please help me....
    28-Mar-2008 01:07 PM
    blue_panther9_9 wrote:
    Could anyone help me with this problem
    i've installed NSU and nokia pc suite(all latest..)
    i've plug the my n95(v20), detected by PC suite...
    i run NSU,, detected,,, and downloaded v21 firmware for n95 (112mb)..
    after it finished downloading, when it try to install it.. it says
    "Downloading update failed"
    "internal module error"
    maybe i didnt read the instruction about change profile to general..
    i changed it to general, the problem still the same...
    okay maybe after i didnt change profile there is some file left in my phone.. so i decided to soft n hard reset.... and i connect again... still showing the same problem, after it finished download...
    so i used my other computer(maybe there is some problem with my vista), so i used my XP...
    and it still showing the same problem..
    i've used that msxml4 solution, but it still didnt work...
    Please help me....

  • [SOLVED] Can't get grub2 hidden menu

    Since the upgrade to grub2 1.99~rc1, I'm not able to get hidden menu anymore. Here's my /etc/default/grub:
    GRUB_DEFAULT=0
    #GRUB_TIMEOUT=5
    GRUB_DISTRIBUTOR="Arch Linux"
    GRUB_CMDLINE_LINUX_DEFAULT="quiet"
    GRUB_CMDLINE_LINUX="elevator=noop acpi_osi=Linux fastboot logo.nologo ipv6.disable=1"
    # Uncomment to enable Hidden Menu, and optionally hide the timeout count
    GRUB_HIDDEN_TIMEOUT=3
    GRUB_HIDDEN_TIMEOUT_QUIET=true
    # Uncomment to disable graphical terminal
    #GRUB_TERMINAL=console
    # The resolution used on graphical terminal
    # note that you can use only modes which your graphic card supports via VBE
    # you can see them in real GRUB with the command `vbeinfo'
    #GRUB_GFXMODE=1024x768x32
    # Uncomment to allow the kernel use the same resolution used by grub
    #GRUB_GFXPAYLOAD_LINUX=keep
    # Uncomment if you want GRUB to pass to the Linux kernel the old parameter
    # format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
    #GRUB_DISABLE_LINUX_UUID=true
    # Uncomment to disable generation of recovery mode menu entries
    #GRUB_DISABLE_LINUX_RECOVERY="true"
    I updated grub following archwiki directions and regenerated grub.cfg with grub-mkconfig -o /boot/grub/grub.cfg, but still no luck, grub menu comes out at every boot...
    Am I missing something?
    Thanks!
    Last edited by hermes (2011-02-16 15:03:23)

    What about if you uncomment
    #GRUB_TIMEOUT=5
    and set the value to match the hidden timeout?
    rebuild the config and try again, hope it helps

  • HP Photosmart D7160 printer hidden menu

    How do I find the hidden menu on the HP Photosmart D7160 printer?

    Hello,
    Please click  here to access the steps that should resolve the issue.
    If issue still persists, then call HP Tech Support for further assistance.
    If you are in US , the toll free # is 1-800-474-6836 .
    If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the white star under my name.
    Click "Accept as Solution" if it solved your problem, so others can find it.
    I work for HP
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Lenovo L220x hidden menu ?

    How do i get to hidden menu ?
    Solved!
    Go to Solution.

    Turn off display by power button. Press and hold  <-- and --> buttons then turn on display holding this keys. Service  menu is now shown as "F" in main menu. Enjoy..

  • Update to V20.0.015 and Maps on N95..

    I updated to the v20 software and my maps were not visible anymore. version of map software before was Ver3.0 now looks like Ver1.2
    I reloaded the maps but still no show.
    I removed the sim card and reloaded the maps and yes the maps are visible ( i found this info on a thread here)..
    Just one thing some maps are offset... land and sea do not match... anyone can help with this?
    I restored my old data..no problems...
    The rest is great.. better gps position locking..faster..
    better and faster handling of pics in gallery..
    better battery consumption....
    I think its ok if i find a solution to this...
    BTW I am from MALTA an island in the Med and its important to have this feature working....
    Also can someone add Malta to the list of countries to input into the Phone in initilisation..
    Thanks
    Joe

    As grschinon says, they almost certainly will be able to tell from the IMEI number.
    I always take the reciept along when I have taken handsets in very much so if you are taking it into a Carphone Warehouse somehow the local one to me insists on it, others I know will barcode the handset and then it comes up on the internal Nokia System that they are logged into, (which the CPW should also be able to access they always say that its broken! ) and it comes up with lots of details about the handset.
    As I mentioned before, all is not lost if 25 miles is too far away then you can also use the Nokia Freepost service to send it to Nokia UK central service centre.
    Whereas the local service centre should be able to use their boot loader to reflash it in an hour or two, the send away service will be a few days.
    http://www.nokia.co.uk/A4767799#
    and the form and address to send it to are in PDF here:
    http://tinyurl.com/5dmq4e
    For UK.
    Using the Nokia updater on a handset that you are updating the official firmware on does not invalidate the warranty. If like I said previously done anything silly, which I will not go into here! then you should be fine.
    Hope this helps, let us know how you get on.
    Shunts...
    Message Edited by shuntfield on 13-Jun-2008 11:46 PM
    Message Edited by shuntfield on 13-Jun-2008 11:48 PM
    I will mostly be communicating with a Nokia E72 Zodium Black
    Nokia E72-1 with Vr 051.018.207.04 Software
    If this post helped... Add some kudos!!

  • N95 Firmware v20.0.015 Taking a long time

    Hi,
    Can anyone tell me how long the firmware update should take?
    I have had the Nokia Software Updater "Downloading Updates" for about an hour.
    I have a fairly fast internet connection if that helps?
    Thanks
    Bill

    Something has gone wrong with the update or you tried to update using a dial-up internet connection.
    You could try a hard reset:
    1. Switch off the phone.
    2. Hold down the following three buttons: Green (call answer button), * button, and '3' button.
    3. While holding these buttons, press the power button and switch on the phone.
    4. When the message 'Formatting' appears on the screen, release all of the buttons.
    If this fails then your only option is a repair which will be covered under warranty.
    Care points:
    UK
    http://www.nokia.co.uk/A4228006
    Europe:
    http://europe.nokia.com/A4388379
    Elsewhere:
    http://www.nokia.com and select your country.
    .Message Edited by psychomania on 29-Nov-200712:52 PM

  • Extra White Space from Hidden Menu Bar

    This seems to be a problem introduced by LV 2013. I have a VI that runs with the menu bar hidden. When I hit ctrl-m to see how it looks in run mode, it looks fine. When I run the VI, instead of fully hiding the menu bar, it leaves white space. This only seems to be a problem when the VI is the top level. When the VI is opened from another VI, it looks fine. I've attached screenshots when the VI is running as a top level, ctrl-m is used and running when launched from another VI. This was not an issue in LV 2012. It's only been a problem since switching to 2013.
    Solved!
    Go to Solution.
    Attachments:
    Settings Screen Running Dev.png ‏86 KB
    Settings Screen CTRL-m.png ‏84 KB
    Setting Screen - Launch as SubVI.PNG ‏107 KB

    Greetings thutch79,
    I replicated the settings shown at Window Appearance Dialog.png on a new VI, ran it, and did not reproduce the problem.
    I wonder if you experience the same behavior with a new VI? If not, you can copy paste the code to a new VI to fix a potential corruption issue.
    Regards,
    Alejandro | Academic Program Engineer | National Instruments
    Attachments:
    Window Appearance.JPG ‏119 KB
    Running VI.JPG ‏21 KB

  • N95 V20 Welcome Note/Logo BUG!

    Hello Everyone
    After I upgraded to V20 from V11, I have this bug. Welcome Note /Logo does not work properly anymore.
    Forexample; If I write a text to show up when the phone boots, some times (one in 10) it does not show up, the blue NOKIA logo appears then goes right in to the standby screen!
    Similarly, sometimes even my default "HandShake" screen is skipped by the phone, and the phone goes right in to the standby screen...
    Anyone else is experiencing this? Should I be concerned? I re-installed the firmware twice and it is still doing this.
    Thanx.

    It's nothing to do with the year, it's just a bug that appeared in recent firmwares.
    The N96 had the bug in v10 and v11 but it was fixed in v12.
    The N95, N95 8GB and N82 all have this bug in v31. I believe the 6110n also has this bug.  There have been many posts about it already this year.
    The issue is caused by the alarm clock and only effects users that set the alarm before midnight and switch their phones off.
    Can you provide any links to any posts on this forum that shows a 5800xm with this issue?  Some 5800xm's have an issue with losing a few minutes every now and then but it's not the same bug as the other models.
    Message Edited by psychomania on 13-Mar-2009 03:28 PM

Maybe you are looking for

  • I have just upgraded to Lion and have lost front row. How do you get it back. This is a critical app for me

    Having updated to Lion I have lost front row. Apple have taken out a critical app. What is the use of a computer with out the abilitl to play a dvd. How do I get it back

  • Getting Started with FDS

    Hello all, I want to create a simple application in FDS & Flex Message Service. From where i have to start? Is there any simple app existing so i can refer and go through it? From where i have to start developing app in FDS and FMS? Thanks, Nirav

  • Fsresource - runmode config stored in crx via xml

    Hi, i'm using the fsresource sling extension to access the filesystem when working on JSP, JS, CSS and so on. When just yanking the bundle into the crx and configuring it via the OSGi console, everything works as expected. But when i try to add a new

  • Bit off the topic!

    Yo all Its the first time i've ever seen this, can any of you help me please! I have an apache http server running, and i've copied an applet accross to the server with its html file(obviously!), i can connect to the java server through the applet 10

  • Unable to empty trash after upgrading to Lion

    I recently updated to 10.7 Lion and now cannot empty my trash either by right-clicking and selecting empty trash and also accessing the Finder menu and selecting empty trash or secure empty trash. I can hear the standard empty trash sound clip but al