N95 Wifi, home network and hidden access points

Hello-
Just picked up a N95 and having some problems. First, my home network doesn't broadcast a SSID. I stumbled across the home network option and was able to configure it. However, it's never an option when I need an internet connection; e.g., it never shows up in the wlan list.
So, how do I congigure a hidden access point so I can use it? The user guide says you should be able to do it manually, but doesn't go into any details.
Secondly, exactly what is the home network setting for and why is it separate from the other wlan settings?
Thanks,
Jay

Jay,
I too have a hidden network (SSID not broadcast), the N95 seems to have a problem with this. It may or may not show up on the active standby screen (on my Voda N95, it shows up when I take my sim out!).
To configure your accesss point :-
Tools / Settings / Connection / Access Points
then Options / New access point
Connection name
(enter a name, whatever you want to call it)
Data bearer
=wireless LAN
WLAN network name
(enter your SSID here)
Network Status
(public or hidden)
WLAN network mode
(Infrastructure or ad-hoc. If you're using a router, infracstructure should be the one you want)
WLAN security mode
(Open, WEP, 802.1x or WPA2. Check your router)
WLAN security settings
WPA/WPA2
EAP or Pre-shared key (consult your router)
EAP plug-in settings or Pre-shared key
(which one you get depends on what you set above)
WPA2 only mode
(leave alone)
Having done all this it still won't show on the active-standy screen (at least it doesn't on mine) in the WLAN section BUT if you know try and surf the web it should ask which access point you want to use - assuming you've got it set to 'always ask'. What this seems to do is only list the connections that it can find (i.e if you've got a 'Starbucks' and a 'home' connection defined, it'll only show 'home' at home and 'Starbucks' when you're getting your latte. The standby screen may show, how to decribe it, a four leaf clover near to the battery level indicator, this is the indication that it's either found or connected to your wireless lan.
I think the 'Home netw.' option is for use with the Home Media Server application supplied on the CD. I haven't tried it so can't confirm for sure.
Hope this helps,
Simon
E&OE
Sony CMD-Z1, Nokia 8110, Nokia 6210, Nokia 6610 (returned within a week), Nokia 6600 (twice), N95, 3109c & N97.

Similar Messages

  • I have ipad2, using wifi home network and ios7. Why I cannot play youtube...help!

    I have ipad2, using wifi home network and ios7. Why I cannot play youtube...help!

    You don't download anything at all. The feature is built into the iPhone 4 already. Your carrier has to support the feature and there might be an extra charge to use it.
    You can read about how it works here.
    iOS: Understanding Personal Hotspot - Support - Apple

  • Connecting two routers to create a home network and have access to the net "wired"

    How do i set up a network between two linksys routers that can access the internet and computers set up on both routers. I noticed I cannot browse our home network computers that are behind the other router. currently i have a net connection going to router 1 and a cable from that router going to the wan port on router two. I cannont access router 1 computers from router 2. thank you for your help!

    See here.

  • Suggestions for NAS for home network and remote access to clients

    I have a photo studio in my home and will need to get the digital files to my clients roughly once a week. i am currently using dropbox, but was thinking of purchasing a NAS that I could use for this purpose,as well as for my home network needs, mainly itunes and photos of the kid...
    any suggestions for a mac friendly NAS , and how it can be accesed by my client over the internet?
    can a NAS be accessed like a FTP site, using fetch or another FTP client?
    thank for any help.
    -thomas

    Hi Thomas,
    I have had similar considerations and finally chose QNAP 439 Pro II over the many other ones out there (LinkSys, NetGear, Bufallo, etc.). Without going into technical details, the main reason for my choice were easy-of-use, functionalities and scalability:
    http://www.qnap.com/prodetail_feature.asp?pid=148
    It's not the cheapest solution out there, but works great with the Mac, even acts as storage solution for TimeMachine (with latest firm ware). And implementing client access is easy.
    Hope this helps.
    Kind regards,
    Mark

  • I found a wifi network called linksys and it let me connect to the network for a while but now it wont let me. it says that the ipad 2 is unable to connect and we have tried to connect to the home network and it didnt pick up the signal.

    but my laptop will. so my grandson restarted the home network and the ipad 2 still wont pick it up. but my laptop will pick the home network.

    Start here.
    http://www.apple.com/support/ipad/assistant/wifi/
    http://support.apple.com/kb/TS1398

  • How to setup once an Airport home network and keep it alive?

    Hello!
    I have the following hardware setup:
    1 - A Macmini 2009, Ethernet wired to my router which allows the connection to the internet;
    2 - An HP Deskjet printer, USB connected to the Macmini;
    3 - My wife's laptop PC, WiFi connected to my Mac.
    My Macmini handles the internet connection the traditionnal way (Ethernet and PPoE) and has a static IP on it.
    (Why a Static IP? Because I run my own Webserver.)
    I set up a WiFi Home Network in order to allow my wife sharing both my Internet Connection and the Printer Connection.
    Everything run well: fast and smooth. The PC has Internet and Printer access.
    Problem is:
    After each restart, I must re-create the Airport home network.
    System Preferences-->Airport doesn't memorize the name, parameters and credentials of this network.
    How can I fix this?
    Many thanks in advance for your replies!
    Best regards
    Gerry

    If your router is wireless, you should probably use the laptop to configure it to take care of the network (i.e. have the router distribute the IP addresses). Then you can connect your computer to it via the LAN port on the router. Otherwise, you would have to set up your computer to "share its Internet connection" (via Preferences/Sharing or Preferences/Network not sure). I don't think you need to create a network for this.

  • N80 home network and WWW

    I have recently purchased an n80 and I am trying to get the home networking and internet functional through my wirless router. So far I have had little success. I have enabled upnp on my d-link router/modem . I have installed The simple center software on my laptop and uploaded files to share. I have setup an access point on my n80 and I have enabled sharing. The shared folders on the n80 have also been selected to share all files. The simple center software has been allowed to operate through xp's firewall. THe only thing I am not sure about is the port forwarding on the router. I have a trigger port and a public port in the applications gateway section of my router . I have entered the ports listed in the simple centers setting section (1900,49153,49154,49152). I have these numbers in both the trigger port and the public port on the TCP protocol.
    Occasionally I can connet to the internet. However when I close the connection down and try to start it up again sometimes it does not work , showing 'unable to perform operation'. The only way to re-establish the connection is to power the router down then backup(reset).
    The same goes for the home networking. I had no success a all on the first day of trying. Went to work. When I came back tried it again and it worked perfectlly ?? Now on the third day it is working ocassionally.
    Anyone else had simmilar problems ? If so any soultions would be appreciated ! The phone itself seems to be pretty glitcy. And battery life isnt the best either. Apart from that eh !

    Forget that - just sussed it out...
    I'm using v3.0617.0.6 (03-05-2006) RM-92, Nokia N80 (31.01)
    I can't seem to get anything using the browser - I constantly get "Out of memory" errors, even when trying to use GPRS.
    It moans something about "packet data" and then bombs out...

  • I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network.  Does anyone know where to find this?  It's a password that I set myself, not the one that came with my router.

    I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network.  Does anyone know where to find this?  It's a password that I set myself, not the one that came with my router.

    It's in your Keychain on the computer you usually use to connect to your network - the "kind" will be "AirPort Network Password".
    Your Keychain can be opened by using the Keychain Access program. It is in your Utilities Folder.
    Open Keychain Access, and type airport in the search field. You will see a number of entries. Choose the one with the name of your wireless network, open it, and check the box next to "show password". Before it reveals itself you will be asked for your login password - the one you use to log in to your MacBook.
    The network password will appear in the box.
    Quit Keychain Access.

  • Connect Fios to Cat5e home network AND Coax connections?

    My Verizon fios system was recently installed.  My home is wired for a Cat5e home network and standard Coax in all rooms.  The fios system is currently connected to the Coax connections and the TVs and Fios router all work fine.  Problem is that I would also like to use the Cat5e connections for devices that access the internet that don't have wireless capability and are not proximate to the Fios router.  Is it possible to connect the ONT to my Cat5e home network so that I can connect other devices directly to the Cat5e outlets, and keep the existing Coax set-up?
    I understand that the standard Fios set-up only allows using either an Ethernet output or the Coax output, but not both.  Any suggestions?
    One option might be to move the router to the basement (where the equipment is located that I want to connect to the Cat5e network), but then the router will likely be too far from the rest of the house to receive the wireless signal.  In that case, is it possible to connect a wireless router in another location (I have a Belkin wireless router).  Or do I need to get another router from Verizon?

    DC_Sox_Fan wrote:
    I just spoke to Verizon Fios Tech Support and they claim that it is NOT possible to use both the Coax and Cat5e connections.  So, for those that have a Cat5e home network, but still want to use th Coax for TV, Verzon says you are out of luck.
    Thats not strickly true but its not bad info either. You cant use both the coax and cat5 at the same time for INTERNET. The coax internet port (moca) is not active at the same time as the ethernet port. However, many systems use the ethernet for internet and coax for TV.
    Depending on how your house is set up this can be accomplished many different ways.
    I would assume that you have some kind of utility closet were all the ethernet cables converge, where you could place the router so that it can connect to all the rooms. Is this correct? If so, is there also a coax connection in there? Again, if so, you could place the verizon router in the closet, connect the coax to the router for the link to verizon and the TV's and then connect the ethernet to the lan for the rest of the house. This would be the simplest way assuming that you have this type of connection available to you. there are many other ways but it would all depend on what you have available to you and how your house wiring is set up
    ====================================================================================
    Error exists between keyboard and chair.

  • Wifi home network no longer showing on ipad in one room of house

    All of a sudden, ipad first gen won't recognize wifi home network or any network in one room of house while other devices work fine in same room.  I've tried to update firmware for router, reset the ipad to factory defaults and "forget network" but none have solved problem. How can I fix this? Thanks!

    Do a Google search using apple airport extreme setup and you'll get links to a User Guide and setup instructions.
     Cheers, Tom

  • Connected to home network, but cannot access internet on ipad

    I have got strong signal on home network but cannot access the internet. Tried resets, etc

    It could be a simple problem that needs a reset for the related devices. Other than that, try to control the security settings and passwords of your home network. You might be using WEP password protocol to connect your home network. Try to use WPA protocol instead of WEP. Maybe it will help to solve your problem.

  • Home Network and printer sharing with XP and Vista

       I have a home network and printer wired on my PC desktop which runs XP.  My Vista laptop has been connected to internet and printer through the home network for past 6 years flawlessly.  However, since October my Vista laptop cannot
    connect to the network printer, but internet has been working fine. 
       I've tried to uninstall/reinstall, update drivers, connect via TCP/IP but printer isn't located by add printer wizard.  When I plug printer directly into laptop via USB it works fine.  I also have tried another xp desktop in the house
    and that cannot locate the printer also.     Help!
    Thanks in advance,
    Medic

    What have you tried so far?
    Have you seen this yet...
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1770.html
    http://docs.info.apple.com/article.html?artnum=25609

  • I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server

    I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server, despite following the Systemline instructions that impy this can be done.
    Can anyone please advise what I am doing wrong?

    Hi LowLuster
    Thanks for reply. I am not an expert on these sharing protocols but I think I have turned on SMB sharing but still wont connect. I tried adding netwrik drive by using cntrl K in finder and using smb\\network address but nothing. It is driving me mad!!

  • Recently I was working on my home Network and lost my Password for my Home wireless connection. After many attempts, I remembered the password and was able to get in. Now the MacBook Pro only works at home on a Hard wire connection. I have an additional 9

    Recently I was working on my home Network and lost myPassword for my Home wireless connection. After many attempts, I remembered thepassword and was able to get in. Now the MacBook Pro only works at home on aHard wire connection. I have an additional 9 devices on the same network, allare functioning properly. The Air connection works fine at any other Networksout side the Home connection. I did a PRAM reset, deleted the Network profileand rebuilt in System Preferences. Still unable to connect wireless on Homenetwork. Any Ideas?

    I seem to have fixed it by putting <div  class="clearfloat"></div> after the navigation bar?

  • Share iTunes Library on home network and edit from all computers?

    I'd like to share my iTunes library on the 3 Macs on my home network and be able to edit the library (add songs, edit titles, add cover art, etc.) from any of the computers. Is there a way to do this? Thanks!

    We're attempting to work out the same trick on another thread.
    http://discussions.apple.com/message.jspa?messageID=6450437#6450437

Maybe you are looking for

  • Changing Lion PDF default security settings

    After I create a document in Word or Pages, I save them as a pdf.  I then want to digitally sign them in Adobe Reader.  But the default security settting when saving as a pdf does not allow adding a digital signature.  Anyway to change the default OS

  • Narrative is not showing up in Layout View

    Narrative is not showing up in layout view when I'm creating a custom report. In Step 2, Creating Layout. I am hovering over add view, then down to advanced. Narrative is not showing up. How do I get this to work??? Static text and Legend is not show

  • Closing POs

    Hi ppl,           I am working on closing all the open POs(ekpo-delivery complete indicator is blank) along with some more validations from other db tables using for all entries(select query). finally i have the open POs in an internal table. within

  • Iphone 5: contact problem

    I enter a new number into the phone and press add contact, but it does not save to the address book. however if i search the contact its on the phone somewhere but not the address book. how do the contacts add to the address book when added using the

  • TS2976 i am trying to set up two email accounts for outlook, one for me and one for my husband.  Does anyone know how to do this?

    I am trying to set up icloud emails on outlook 2010.  It only lets me add 1 email rather than two.  One is for me and one for my husband.