N95 Wifi WPA connection problem

I recently bought the Nokia N95 and everything is working except the wifi WPA part. I DL the latest firmware (v20.0.015) but that didn't help.
Everytime i connect with my home wifi lan it asks for a password. It doesn't matter what password i try it says "invalid pre-shared wpa key" So even simple passwords like "12345678" or "merryxmas" don't work. If i change from WPA-PSK to WEP 128 bit WEP key then it works ???
This must be a N95 error ? I also tried tkip and aes but that didn't help. My Phone AP settings r:
Network - public
WPA/WPA-2
Pre-shared key
WPA-2 only - off
Does anybody has a working WPA wifi N95 ???

If I connect to the PC as "Mass Storage" I can see the phone as a removable disk and go into the file structure, just as I could in PC Suite mode. However, if try to drag and drop a file from my N95 to the desktop the phone bleeps intermittently every 2-10 seconds, the USB connection icon on the phone display will blink in time to the phone bleep. The "Copying" bar on the PC shows the file transfer occurring but extremely slowly. E.g. A 4Mb MP4 showed 3 minutes on the progress bar but after 10 minutes was barely a sixth of the way through.
It appears that the connection betweeen the phone and PC is only active when the phone bleeps, in the periods of silence there is seemingly no activity. I think this because if I look at the file structure on the phone, while the trasfer is taking place, the window will freeze until the next bleep of the phone.
Maybe someone can recommend a brand and model USB2.0 PCI card (preferably also with firewire) so that I can buy one that I know works?

Similar Messages

WiFi Internet connectivity problems after upgrade to 10.8.4

After upgrading to MacOS 10.8.4 I am facing regular interruptions to my WiFi internet connectivity. Periodically the internet connectivity is lost and the only way to fix the problem is to turn WiFi off and on again. This happens frequently when I am downloading files at using big bandwidth (more than 1.5-2 MB/s). If I use assist me on the Network preferences tab, it displays an ISP error when the connectivity is down, however I am certain that I do nota have any kind of ISP or router issue since at the same time I have WiFi internet connectivity from my iPad mini, iPhone 4S and Samsung Galaxy S3. Therefore it should be a 10.8.4 issue

Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)

N95 8gb BT Connection Problem With BMW 5 series

Hello everyone,
I hope someone could help me with this. I just got my N95 8 gb & I have tried to connect my phone to my BMW58610 BT but it seems like it constanly drop ny itself & then coneecting again & drop & connect. I do not know how to get this problem fix. 20.2.005 30-04-08 RM-421.
And then sometimes one folder will be missing by itself for example the n-gage folder will disappear & then it will come back within seconds or maps folder will disappear & will appears back.
I would really appreciate any suggestions or help!

I had a situation whereby my N95 8gb will connect to my iDrive and sometimes after a while, when I make a call, I can hear the person I am calling but they can't hear me. This is what I have learnt from trial and error since.
I tried everything to resolve this so I am not sure which actually fixed it so I'll tell you all I did. I updated firmware on both phone (V20) and car. Deleted all pairings on both phone and car. Repaired. I must have deleted pairings and repaired at least half a dozen times before the problem mysteriously disappeared.
Another thing I have noticed is, it is better to leave the phone for a few minutes after it has connected, to allow it to download all the contacts before using it. I have had the bluetooth disconnect or the HUD malfunction when I use the phone straight away.
I had to do the same with my N96 before it would work satisfactorily. My N80, however had no such problems. Strange.

Ipad2 with wifi WEP connectivity problems

Please anybody could help me to get connected my ipad2 to a wifi wep. The ipad recognizes the wifi but not able to connect... Thanks

This is from the Apple WiFi trouble-shooting document: http://support.apple.com/kb/TS1398
- If you are using WEP security and have multiple WEP keys on your Wi-Fi router, try configuring your Wi-Fi router to use only a single WEP key in key index 1.
- Consider using WPA or WPA2 instead. WPA and WPA2 encryption protocols are newer, more effective security options for wireless networks than the older WEP protocol.
WEP security should really not be used. It has been deprecated by the WiFi Alliance as insecure since 2004 (it can be cracked in seconds by hackers).

[Solved] WPA connection problems - network was WEP encrypted.

Hi all, and thanks in advance for reading.
Tl;dr for the below: My card seems to work, but won't associate with the router using either netcfg or wpa_supplicant and I have no idea why. I have no graphical system to work from as yet.
Basically, I've just installed my Arch system, and I'm trying to get the wireless working. I have two wireless cards, one internal (Atheros) and one USB (preferred - it's a Belkin F5D9050, v3). My router - a BT HomeHub - uses WPA-PSK encryption.
For the moment, I'm trying to get the Belkin card - wlan1 - working as it gives better reception at home, so I'll use that in the examples, but I've had the same results with both so far.
Running
iwlist wlan1 scan
shows my network, so I think the card itself is working ok.
My netcfg profile reads:
CONNECTION='wireless'
INTERFACE='wlan1'
SECURITY='wpa'
ESSID='BTHomeHub2-2J6S'
KEY='...'
IP='dhcp'
TIMEOUT=120 // Large timeout I know, but apparently it can make a difference.
When attempting to connect with netcfg, I get the message 'WPA Authentication/Association failed'.
Trying with wpa_supplicant.conf as below:
network={
ssid="BTHomeHub2-2J6S"
proto=RSN // I've also tried WPA2
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP
psk=[my passphrase as converted to hex by wpa_passphrase]
Running
wpa_supplicant -dd -B -Dwext -iwlan1 -c/etc/wpa_supplicant.conf
produces output similar to this.
I'm stuck. Any thoughts? Any and all help is appreciated!
Thanks in advance!
(Edited for stupid title)
Last edited by Owen Tuz (2010-09-19 23:17:16)

If you inspect
iwlist $interface scan
output you can see which ones are WEP or WPA(2):
WEP:
Cell 04 - Address: xx:xx:xx:xx:xx:xx
Channel:6
Frequency:2.437 GHz (Channel 6)
Quality=21/70 Signal level=-89 dBm
Encryption key:on
ESSID:"WiFi 13"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s
Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=0000013713e511a8
Extra: Last beacon: 2493ms ago
WPA2 Personal:
Cell 03 - Address: xx:xx:xx:xx:xx:xx
Channel:48
Frequency:5.24 GHz (Channel 48)
Quality=65/70 Signal level=-45 dBm
Encryption key:on
ESSID:"Zeus 802.11n"
Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=0000011fcd6018a8
Extra: Last beacon: 60ms ago
IE: Unknown: 000C5A657573203830322E31316E
IE: Unknown: 01088C129824B048606C
IE: Unknown: 030130
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK

IPhone 6 keeps getting kicked off wifi - No connection problems though

So I've been having this problem with my iPhone 6 wifi ..
I'm currently going to Texas Tech University for college, and they have campus-wide free wifi for students (after supplying login information). Now when I connect to their wifi network, I connect with no problem. However, if I wait 4-5 minutes, I'm kicked back to LTE. I have no connection issues though, as I can go back into settings and reconnect to the TTU network with no problems.
I asked some IT guys at the school, and they said they "weren't sure" exactly why it was happening, though they guessed saying, "Your phone bumps you off wifi automatically in order to save battery life." -- Is this true? Is there some way I can change this so I stay on wifi when I'm on campus?
I've tried turning my phone on & off, same thing happens. Likewise, this same issue happens when I'm home at my apartment trying to connect to my own wireless server.
Any ideas / suggestions?
Thanks!

Yes, that would be it. It has to do with the way the IT department has the Wi-Fi setup. This prevents people from coming by the school, parking the car and using their Wi-Fi. You have go log in to use it. There is a way for them to set up the Wi-Fi to be what is called persistent, so when you disconnect when the phone goes to sleep, it will connect again when it wakes up, but they may not want to do that. We have that at our college, but that is only for certain users and has a different network SSID. Unfortunately, you are going to have to live with the way they have it set up and log in as requested. Take care.

N95 Car Kit connectivity problems

I have a Parrot LS 3200 carkit. My phone connects ok but when I make or receive a call the LS3200 crashes, screen goes blank then reboots and reconnects to phone. I have been informed that it is a problem with N series phones. Can any one offer a solution?

Hi,
My N95 makes and receives calls perfectly. What it doesn't do is access my contacts on my phones automatically.
Perhaps try deleting the existing pairing and create a new pairing???

Wifi re-connection problems on our iPad

Hi folks can anyone help us - we were connected wirelessly to our iPad using a linskys router but then a friend came to stay; she also connected successfully wirelessly, but since then we have been unable to reconnect the iPad wirelessly. thanks!

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

Wifi / browser connection problem with IOS 6

With IOS 6 and iPad 3 or Iphone 4, I can't connect to my enterprise wifi anymore.
I connect to the network without any problem. But afterward, within Safari where I'm have to put login and password (trapeze networks btw), it blocks on "submitted" and don't proceed further.
While with IOS 5.1.1 it worked perfectly and with my Blackberry, I don't have any problem today. I suppose a IOS 6 bug...
I tried to put the proxy http on auto.
I tried to reboot the idevices.
Both without any improvement.
Any idea?

These steps/ workarounds were defined as follows for the difficulties experienced with IOS6 clients. These have been tested using Juniper / Trapeze MSS software version 7.6.x and above
1. Set web-portal ssl-mode <none/full>
Was to set the ssl mode to none or full(both work OK for the IOS6 devices)
Since there are concerns with the security, please try if the ssl-mode turned to full brings a change.
2. Set web-portal force-html-login mode disable
This command requires users to login through a Web portal page. The current implementation of Web portal on the Juniper WLC/Trapeze MX includes specific handling of Apple's iOS devices. When a request for for this URL is sent, the WLC responds with a spoofed HTTP response including the anticipated 'Success' page contents. This was implemented as a workaround to an earlier problem with older versions of iOS. In the current iOS, if the requesting device does not get the anticipated response the iOS device. automatically opens a Web browser interface and then the web-portal login page.
Juniper engineering are anticipating the fix on the next maintenance release of the MSS.

WPA connection problems

I tried connecting to my home network, which is protected with a WPA password - however, i forgot what it was and typed in an incorrect one 3 times before checking from the keychain access what it should be.
Unfortunately, when i now go on to join the network, i can put in the password but the 'join' button is greyed out.
How can i fix this?
Oh, and it's an Airport base station (54Mbps).

Ok, I've played around with it a bit, and it does seem to have something to do with the password.
I dropped the encryption on the network to test whether that was why it didn't connect, and it connected fine to the open router. Now, when I put WPA Personal encryption back on, it still doesn't let me put a password in again! Even though I put a different one on...
I don't want to leave it open, and don't want to use WEP either (because anyone with a bit of software and 5 minutes to spare can break the encryption) - so what can I do to get it working again?

Nokia 5630 - wifi and connection problems + some s...

Hi guys,
I'm experiencing strange behavior in my Nokia 5630. When i got it i added 3 wifi points without a problem to "Internet destinations". But recently, whenever i try to add an wifi access point, it puts it into the "Uncategorised destinations". And i cannot move it to other folder (i select move, and choose Internet, but it throws me out to main menu). Because of this i cannot use new wifi on applications which check the "Internet destinations" for available wifis.
And few unrelated questions:
- has anyone had experience with NCP VPN client for symbian?
- is there a application like SmartConnect for this phone? I think SmartConnect is only for N and E series?
Thank you

It is known problem with VPN Access Point on S60 5th phones.
You may contact NCP VPN developers and see if they may offer some solution.
Alternatively you may have a look at another VPN client for S60 3rd/5th. It is not IPsec VPN like NCP, this is PPTP VPN Client - SymVPN for S60 3rd and 5th Edition phones.
This software is also placing created VPN Access Point into "Uncategorized Destinations", but you can move this Access Point to any needed Destination and therefore you can use it with another software on your phone .

HT4199 WiFi (DHCP) connection Problem

I have just bought a new iPAD 3 but could only get it to connect to my home network when I configure the IP address manually? It doesn't work when I use the DHCP setting. Everything else works on my router including my daughters iPhone.
Anyone know what's going on?
The iPAD works fine in the house but I suspect not much use if I want to go to another location - coffee shop etc.
HELP!

The reason I set up a static IP address for my home network was because the iPAD was not getting an IP address whenit was set to DHCP. I didn't want to configure it this way but didn't have any other choice.
Anyway, resetting my router to clear out all the expired IP addresses from the DHCP seems to have fixed the problem as this has allowed the DHCP server to respond faster to the iPADs requests and before it gives up and assigns the 169.254.XXX.XXX address.

3540 - wifi Direct Connecting problem

Hi ,
I am not able to connect my 3540 printed to my smart phone (GalaxyIII) neither to my Macbook Pro.
I want to do this without router . Appreciate some one guide me the setting , both in the pronter and in my phone ,Mac.
Thanks in Advance .

Hello dasprashant,
Welcome to the HP Forums!
I understand you're unable to connect your Deskjet 3546 to your Smart Phone and your Mac computer without a router. I will do my best to assist you! What is your operating system on this computer? Mac.
I would recommend following this HP document on Printing with HP Wireless Direct to setup your Galaxy phone. As an added feature, your printer does come with Wireless Direct, which allows you to print directly to your HP printer without a network. To setup your Mac computer, please follow this HP document on How to use the HP Wireless Direct Connection.
Please post your results, as I will be looking forward to hearing from you. Have a great night!
I worked on behalf of HP.

WIFI random connection problems when connected to Cinema monitor

This is macbook pro purchased prior to 2008. I use an external cinema monitor in my office at home. Recently when I start the laptop with monitor connected I cannot get a airport connection. If I disconnect the monitor and restart downstairs I get an automatic airport connection.
I've changed channels on airport to CH 4 since we use cordless phones which I've read are on CH 11.
If I retart laptop downstairs and bring back upstairs and connect to cinema display, i can get airport connection.
Any thoughts on this? Seems to be a system configuration issue?

Odd that in your outline of troubleshooting steps you say you "disconnect the monitor and restart downstairs"...
Can you start the macbook pro UPSTAIRS where you want to be WITHOUT the cable attached to external display and get CONNECTION?
Sounds crazy, but mabey it's your signal strength? Sometimes a wireless connection will work at the edge of it's range okay but establishing connection at the same place will not work. Does that make sense?
Ensure that you can connect to the network when "upstairs" "near the cinema monitor" like you would if it were all working okay but DONT connect it.
Eliminate the up/down part first.
Can you elaborate on your network configuration? What Modem, Router, etc are you setup with?

N95 8BG "WiFi Connection problems" and "Web: no ga...

Like many users, I could not get my new Nokia (N95 8GB) to work with my WiFi. After many attempts, using the various ideas posted, I came up with a solution that works reliably for me.
First lets deal with "WiFi Connection problems"
Menu/Tools/Settings/Connection/Wireless LAN
'Show WLAN availability' = 'Yes'
'Scan for networks' = 'Every 5 minutes'
Some users have suggested choosing 'Advanced Settings' from the 'Options' menu, changing 'Automatic configuration' to 'Disabled' and the either setting 'RTS threshold' to '2346', or setting 'Power saving' to 'Disabled'. I tried both of these but they did not make any difference in my case. However they may make a difference for you, hence their inclusion here.
Menu/Tools/Settings/Connection/Access Points
Choose 'New access point' from the 'Options' menu
'Data bearer' = 'Wireless LAN'
'WLAN network name' = If your network is set to broadcast its SSID, use 'Search for networks' then select your network from the list, otherwise use 'Enter manually' and type in the SSID.
'Connection name' = anything you like, but I use the SSID
'Network status' = not sure about this maybe someone can confirm, but I think if the SSID is broadcast then it is 'public', otherwise it is 'private'.
'WLAN network mode' = match this to your access point configuration. Mine is set to 'Infrastructure', so I do not cover the ad-hoc scenario here.
'WLAN security mode' = again I am using WEP so have not covered other scenarios.
'WLAN security settings' = these should match you access point configuration.
'Homepage' = whatever you like. I use 'http://www.google.co.uk', just so that when I start browsing I get something reliable, useful, and dependable. If Google fails to appear it usually means there is something wrong with your config.
Now lets handle the dreaded "Web: no gateway reply"
Menu/Tools/Settings/Connection/Access Points
Scroll down to highlight the new access point and choose 'Edit' from the 'Options' menu. Now choose 'Advanced settings' from the 'Options' menu.
Assuming you network used IPv4, which most do in my experience, select 'IPv4 settings'. I don't know about IPv6, and don't use a proxy so these are not covered.
The values you enter in 'IPv4 settings', depend upon your network/router settings, and whether you have a DHCP server or not.
Assume your a router IP Address, on the LAN side, is 192.168.0.1, and that it has a DHCP server set to serve addresses in the range 192.168.0.64 to 192.168.0.192, using subnet 255,255,255,0. Since the mobile does not seem able to get an IP Address from the DHCP server we give it a static address 192.168.0.55. Notice this is outside the range sereved by te DHCP server to avoid conflicts.
We end up with:
'Phone IP address = '192.168.0.55'
'Subnet mask' = '255,255,255,0'
'Default gateway' = '192.168.0.1'
'DNS address' = 'user defined'
'Primary DNS address' = '192.168.0.1'
'Secondary DNS address' = '0.0.0.0'
I used something similar and was at last able to browse the web via wifi.
I hope all of the above helps someone out there.

I have just experienced this problem having been using the WiFi network for months without problems. I tries all the suggestions on these forums including the power settings, turning off WEP, and the fixed IP suggestion and none worked. I even reinstalled the firmware and reconfigured everything. It turned out to be the router. I had rebooted it several times to no effect but the DHCP always gave the N95 the same IP address lease. So I changed the range of IP addresses the DHCP could lease and restarted the N95. It got a new IP and was back working again.
If at first you don't succeed, try again. Then quit. There's no use being a damn fool about it.
-- W.C. Fields

N95 Wifi WPA connection problem

Similar Messages

Maybe you are looking for