N95 with Fido Caller ringback trax
Hi, every one my service provider is Fido with my own N95. This morning I subscribe with there caller ringback trax service then I setup everything on there website but now its not working. They said N95 is not there company phone they don't no how to configure it beside Rogers have N95. They called I have to set up WAP in my phone, the helll I dont find anything like that in my phone. Please is there some one can help me about this.
I found something on the Nokia site that might solve your problem:
Point your browser to http://www.nokia.co.uk/get-support-and-software/learn-how/get-settings
Click on the "Download Standard Settings" button
After accepting the disclaimer and clicking on "start" choose your phone from the dropdown menu
Click on "WAP/GPRS"
Choose "Canada" from the dropdown menu
Choose "Fido" from the dropdown menu
Follow the instructions
I hope this is detailed enough for you to set it up yourself, if it isn´t we´ll assist you further.
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good.
Similar Messages
-
Passport not working with Fido SIM
I received yesterday my new BB Passport (directly from BlacBerry). I was excited, however it is frustrating now. My passport is not detecting Fido mobile network. I did lots of troubleshooting with Fido on the phone but nothing worked. I tried the SIM on an IPhone 5 and it worked. Clearly, the problem is the Blackberry device. Now since I bought it directly from BB; only BB can fix the problem. However, no phone support is available from BB. I have to ship back to them. It is frustrating. The WiFi interface is working fine
ASSo, I just got off a long call with blackberry at this phone number: 877-644-8405.
I was also provided another phone number by that agent which is more specific to the passport: 877-255-2377
They have confirmed for me that this issue is the fault of blackberry, not fido.
They have confirmed that they are currently 'working on it' with 'no estimated time of completion'
So, that isn't really a good deal. Its to the point where I have to look at porting my number to a different provider whose sim card is actually recognized without issues by the bb passport. Needless to say, this is a huge hassle for me on a phone that I purchased outright for $700.
The good news is that when the issue is resolved, blackberry withh use a push notification to send the updated firmware for the device, and this will resolve the issue. So, if you can live without your phone until the fix is completed, then you're golden. -
Problem with SPA232D + SPA302D ringback tones??
I recently installed a new SPA232D ATA and SPA302D DECT handset onto our office network, which already uses a trusty SPA525G2 desk phone. Both the SPA525 and the SPA232 register with a hosted SIP provider on separate lines. I don't have any other phones (analgoue or otherwise) connected to the SPA232. After configuring the device and entering a bunch of regional settings, most things with the new phone work as expected.
However, when I use the SPA302 handset (via the SPA232) to call the SPA525, I hear an odd ringback tone that sounds only once followed by silence until the call is picked up or goes to VM. The destination phone continues to ring and can be picked up as normal to initiate the call. Also, the tone is different from the ringback tones entered into the regional settings of either device. Calling other phones and other numbers (outside my SIP account) result in ringback tones that are correct for our region. I did a very quick syslog capture with wireshark and I see a 100->183->200 SIP sequence on these calls, whereas other calls seem to show a 100->180->200 sequence. I didn't see any 182s. Not sure if that is important.
Any idea what might cause this?
Also, a couple of other minor problems reagrding the SPA232D + SPA302D combo:
- The SPA232 will not automatically register to the SIP service after a reset or power cycle, and makes no attempt to reconnect after the intial failure. It will register immediately, however, if the voice component is restarted after a config change in the http GUI. I have set network delay to 0, but noticed no difference.
- The SPA232 (or SPA302) seems to ignore most regional settings. Changes to tone frrequencies and cadences in the config make no difference to the tones heard through the SPA302. Do these need to somehow be resynced with the handset?
Any thoughts greatly appreciated.
With thanks,
Nickthe ringback tones entered into the regional settings of either device. Calling other phones and other numbers (outside my SIP account) result in ringback tones that are correct for our region. I did a very quick syslog capture with wireshark and I see a 100->183->200 SIP sequence on these calls, whereas other calls seem to show a 100->180->200 sequence. I didn't see any 182s. Not sure if that is important.
It IS important. The 180 code is "generate ringback tone locally" command. The callers phone will create ringback tone according it's (regional) configuration. The 183 code is "I will sent you ringback tone as audio" - so local phone generate no tone, just play what it come via audio channel from called device or target exchange to it.
So you need to check configuration of exchange that connect call from SPA232D to SPA525 (e.g. call with broken ringback tone). -
I'm interesting on buying a Firefox Smart Phone, but
I would like to know if are any app to install on Firefox OS smart phone in order to work with cisco call manager 10.5.
Something like Cisco Jabber for Android o iOS.
Thanks,Hi Itech,
If Cisco Jabber has a webapp, or mobile version of their website available, you should technically be able to access it through Firefox OS.
You may also search Firefox Marketplace for an alternative solution:
* [https://marketplace.firefox.com/]
- Ralph -
I am having weird problem intermittently with adding calls or merging them or swapping them. The issue happens 8 out of 10 times whenever I try to do a conference call. This issue came up after I upgraded to 8,1.2. Never experienced this in 8.1.1 or previous version.
Some of the scenarios that I have experienced is:
1. While on the call, when I try to add a new contact, it just doesn't dial the second number.
2. Sometimes the second number gets dialed, cannot merge the calls.
3. After talking to the second person, cannot go back to the first call.
I am very sure that this is not a carrier issue as it worked flawlessly before upgrade.
Anyone experienced this before? Any suggestions?Thanks for the above infromation. I did a complete restore of my iphone through iTunes connecting it to my computer via cable. iOS8.1.3 was re-installed. I then added back my settings and data which were backed up prior to restoring the phone. I still have the same issue with conferencing and adding a third caller. When I hit the [+] box, the existing caller is not put on hold. The phone appears to be making a call but it is not dialing to the 3rd party. Shortly thereafter, the Merge icon appears but there is no active call to merge with. I have tried this several times using my wife's iPhone and our home phone to set up a 3-way call. I know it is not working because the 3rd phone (our home phone) does not ring. Is this a hardware problem? My wife's iPhone 6 works with no problem and was purchased the same time I purchased my iPhone 6. Probably time for a visit to the Apple Store unless there is another solution.
iPhone 6; iOS 8.1.3; Carrier: Verizon -
RFC hangs with a call to function module SSFC_PARSE_CERTIFICATE
Hello ,
We are working on BI 7.0 SP9 .
When we try to test the RFC connection from the WAS Abap to the portal ( WAS JAVA ) using SM59 , the test is hanging but we can read in the bottom of the screen 'Connexion bcv51sf2... OK' !!!
The test connection works sometimes .
But when its not working , with the debug mode , I can see that the program SAPLSSFG/LSSFGU19 is hanging in the function module SSF_GET_PARAMETER with a call to the function SSFC_PARSE_CERTIFICATE
CALL FUNCTION 'SSFC_PARSE_CERTIFICATE'
EXPORTING
CERTIFICATE = PABCERT
IMPORTING
SUBJECT = STR_PROFILEID
EXCEPTIONS
SSF_KRN_ERROR = 1
SSF_KRN_NOMEMORY = 2
SSF_KRN_NOSSFLIB = 3
SSF_KRN_INVALID_PAR = 4
OTHERS = 5.
ENDIF.
ENDIF.
ENDFUNCTION.
The variable STR_PROFILEID has the value of the field ID of the table SSF_PSE_H
STR_PROFILEID =CN=QWO, OU=XXXXX, O=YYYY, C=FR
Due to this error , we cant transport BI Web templates because at the end of the import in the method execution of the transport there is a call to the portal with the RFC. And the transport is hanging
Thanks in advance for you help .
Happy new year. Milan.Hi Frank ,
See below the result of the test :
Test for function group SSFG
Function module SSF_GET_PARAMETER
Export parameters
Value
APPFOUND
<SYST>
SSFTOOLKIT
SAPSECULIB
STR_FORMAT
PKCS7
STR_PAB
/usr/sap/QWO/DVEBMGS01/sec/SAPSYS.pse
STR_PAB_PASSWORD
STR_PROFILEID
CN=QWO, OU=XXXX, O=YYYY, C=FR
STR_PROFILE
/usr/sap/QWO/DVEBMGS01/sec/SAPSYS.pse
STR_PROFILEPW
STR_HASHALG
SHA1
STR_ENCRALG
DES-CBC
B_INCCERTS
X
B_DETACHED
B_DISTRIB
X
But my problem now , it's that 1 of the 2 RFC is working fine and the other one after 1 good rfc test , is hanging now at the end of the function 'CONVERSION_EXIT_ISOLA_OUTPUT' line 14 !!!
See below the ABAP stack just before the hanging .
1 FUNCTION CONVERSION_EXIT_ISOLA_OUTPUT.
2 *"----
3 ""Lokale Schnittstelle:
4 *" IMPORTING
5 *" VALUE(INPUT)
6 *" EXPORTING
7 *" VALUE(OUTPUT)
8 *"----
9 OUTPUT = SAVE_INPUT(1) = INPUT.
10 CHECK SAVE_INPUT(1) NA ' *'.
11 SELECT SINGLE * FROM T002 WHERE SPRAS = INPUT.
12 CHECK SY-SUBRC = 0.
13 OUTPUT = T002-LAISO.
14 ENDFUNCTION.
Stack Dep Event type Event Program Include Line
10 FUNCTION CONVERSION_EXIT_ISOLA_OUTPUT SAPLLANG LLANGU04 14
9 FORM CONVERSION_EXIT SAPCNVE SAPCNVE 107
8 EVENT SYSTEM-EXIT SAPLDSYA <SYSINI> 20
7 FUNCTION DOKU_OBJECT_EXIST SAPLDSYA LDSYAU09 43
6 FORM FILL_EXCL_TAB RSDBRUNT RSDBRUNT 5.664
5 FORM %_INIT_PBO_LAST RSDBRUNT RSDBRUNT 4.061
4 FORM INIT_PBO RSDBRUNT RSDBRUNT 3.666
3 FORM %_INIT_PBO_NEW RSRFCPIN RSRFCPIN 496
2 MODULE (PBO) %_INIT_PBO RSRFCPIN RSRFCPIN 496
1 EVENT SYSTEM-EXIT RSRFCPIN <SYSINI> 20
As i said in the first post , the RFC test is hanging sometimes but now it seems that it's not hanging everytime at the same line of the abap code , if i can trust the debugger !
...and after another RFC test , now all the RFC to the portal are working ...
It seems that when it's hanging , it's at the end of the functions ( SYSTEM_CALLSTACK
or CONVERSION_EXIT_ISOLA_OUTPUT or SSF_GET_PARAMETER ) .
A memory or OS problem ?
Best Regards. Milan. -
Problems with a call transaction
Hi, I'm having some problems with a call transaction and I cannot understand why. I put A in the mode, and I am seeing the dynpros and I am pressing enter it works perfectly but when I use mode N it tells me that there is not information for one of the dynpros and it doesn't work. Does anybody know the problem and how to solve it??
Thanks in advanceHi,
First of all thank you very much for your time.
I am using FB05 and the problem is in dynpro SAPLKACB 0002, and it says that batch input data doesn't exist. Here is the code, maybe you can see what is happening
LOOP AT t_resumen WHERE belnr = t_batch-belnr AND
( contador = 3 OR contador = 4 or CONTADOR = 5 ).
READ TABLE t_clave WITH KEY belnr = t_resumen-belnr.
d_clave = t_clave-bschl.
i = i + 1.
CASE i.
WHEN 1.
PERFORM bdc_dynpro USING 'SAPMF05A' '0700'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
PERFORM bdc_field USING 'RF05A-NEWBS' t_resumen-bschl.
PERFORM bdc_field USING 'RF05A-NEWKO' t_resumen-hkont.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
j_wrbtr = t_resumen-wrbtr.
REPLACE '.' WITH ',' INTO j_wrbtr.
PERFORM bdc_field USING 'BSEG-WRBTR' j_wrbtr.
PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
WHEN t.
PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
PERFORM bdc_field USING 'RF05A-NEWBS' t_resumen-bschl.
PERFORM bdc_field USING 'RF05A-NEWKO' t_resumen-hkont.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
j_hkont = t_resumen-hkont.
j_clave = t_resumen-bschl.
PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE' '=BU'.
j_wrbtr = t_resumen-wrbtr.
REPLACE '.' WITH ',' INTO j_wrbtr.
PERFORM bdc_field USING 'BSEG-WRBTR' j_wrbtr.
PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
WHEN OTHERS.
PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
PERFORM bdc_field USING 'RF05A-NEWBS' t_resumen-bschl.
PERFORM bdc_field USING 'RF05A-NEWKO' t_resumen-hkont.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
j_hkont = t_resumen-hkont.
j_clave = t_resumen-bschl.
PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
j_wrbtr = t_resumen-wrbtr.
REPLACE '.' WITH ',' INTO j_wrbtr.
PERFORM bdc_field USING 'BSEG-WRBTR' j_wrbtr.
PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
ENDCASE.
READ TABLE t_porcentajes WITH KEY gjahr = t_resumen-zzbad
zzbtd = t_resumen-zzbtd.
IF j_hkont = t_porcentajes-cfacpr.
PERFORM bdc_field USING 'COBL-PRCTR' t_porcentajes-prctrfac.
PERFORM bdc_field USING 'COBL-ZZBTD' t_resumen-zzbtd.
PERFORM bdc_field USING 'COBL-ZZBAD' t_resumen-zzbad.
ELSEIF t_resumen-hkont = t_porcentajes-cadmin.
PERFORM bdc_field USING 'COBL-KOSTL' '20801'.
ELSEIF t_resumen-hkont = t_porcentajes-creca.
PERFORM bdc_field USING 'COBL-KOSTL' '20401'.
ELSE.
IF d_clave = 01 OR d_clave = 04 OR d_clave = 40 OR d_clave = 09.
IF j_hkont >= 424001 AND j_hkont <= 424005.
PERFORM bdc_field USING 'COBL-PRCTR' 'DUMMY'.
ELSEIF j_hkont >= 424601 AND j_hkont <= 424605.
IF j_clave = 40.
PERFORM bdc_field USING 'COBL-PRCTR' 'DUMMY'.
ENDIF.
ENDIF.
ELSEIF d_clave = 11 OR d_clave = 12 OR d_clave = 14 OR d_clave = 50.
IF j_hkont >= 424001 AND j_hkont <= 424005.
PERFORM bdc_field USING 'COBL-PRCTR' 'DUMMY'.
ELSEIF j_hkont >= 424601 AND j_hkont <= 424605.
IF j_clave = 50.
PERFORM bdc_field USING 'COBL-PRCTR' 'DUMMY'.
ENDIF.
ENDIF.
ENDIF.
*Fin modificacion marzo 2007.----
PERFORM bdc_field USING 'COBL-ZZBTD' t_resumen-zzbtd.
PERFORM bdc_field USING 'COBL-ZZBAD' t_resumen-zzbad.
PERFORM bdc_field USING 'COBL-ZZBTT' t_resumen-zzbtt.
PERFORM bdc_field USING 'COBL-ZZBTU' t_resumen-zzbtu.
PERFORM bdc_field USING 'COBL-ZZBTS' t_resumen-zzbts.
PERFORM bdc_field USING 'COBL-ZZBAG' t_resumen-zzbag.
PERFORM bdc_field USING 'COBL-ZZBRE' t_resumen-zzbre.
PERFORM bdc_field USING 'COBL-ZZBC8' t_resumen-zzbc8.
PERFORM bdc_field USING 'COBL-ZZBC9' t_resumen-zzbc9.
ENDIF.
ENDLOOP. -
HT4528 my ringer will not sound with incoming calls, please help
my iphone 4s will not ring with incoming calls. any ideas on how i can fix it?
Try sliding the button that is above the volume up and down buttons to see if you have it muted.
-
Iphone 4 contact pictures do not display with incoming calls
iphone 4 contact pictures do not display with incoming calls. they did before the ios 6 upgrade
I am assuming that you have associated a picture with the contact in the information for the contact
-
HT201401 My iphone would not ring with incoming calls, despite ring tone was set up?
My iphone would not ring with incoming call despite ring tone was set up using sound setting. In the beginning, it did ring. After a while it stops working. Any idea to make it work again?
Is the silent switch on the side of the iphone on?
-
Contact names not showing with incoming calls!!!
Hi all,
I just got my E71-1 yesterday and upgraded from a very effiecient E61i....everything was going smooth until all of a sudden, contact names stopped appearing with incoming calls and SMS's.
I went through the forums searching for a solutions and apparently alot of people experienced the same thing.....except in my case, I do not have any duplicate names or numbers!!!!
Any ideas what could solve this???There is a fix for it but you won't like it. I have tried it a few times and it always works but it involves a lot of work. This is what you do.
1. Make a backup of nothing else but your contacts only.
2. Delete all your contacts from both phone and sim card.
3. Start by entering the troublesome contacts from scratch making sure not to duplicate any numbers.
4. Now get those people to ring you to make sure that your CLI is working fine.
5. If it works then start entering the rest of the numbers, once again making sure there is no duplication whatsoever.
6. If it doesn't work, just restore the backup you made of your contacts.
I am fairly sure it will work, but just in case it doesn't you can always restore your backup and you are back to square one. -
Function Module to create Delivery with JIT Calls
Hi SAP Guru's,
We are working on SAP 4.6C version.
I am looking for a function module to create delivery with JIT Calls.
We are currently using the SAP standard function module "SHP_VL10_DELIVERY_CREATE" to create Delivery with JIT Calls. Each JIT Calls has apx 60-80 materials in it and each material refers to a unique Scheduling Agreement. This function module is taking very long time in production server to create delivery, it does not take much time in dev or quality server.
We have JITV setting profile (For Sold To Party and Partner Description Profile) set as RELACE (to summarize the line items in JIT Call).
Is there another function module that we can use to create delivery with JIT Calls?
Thanks in Advance,
AmitHi there,
There is no such function module.
Regards
Sanju -
Skype with Video Calling for nokia c5-00-2
I have nokia c5-00-2 with 5MP camera. I'm looking for a skype version with video call option.. As one of my friend had it when he was in Suadi Arabia and used to call me video chat from his c5. Unfortunately he need that software but could not find it??? Does any body knows where we can download it??? Waiting for you replies.............
Skype for Symbian has been discontinued and stopped working. Since the Nokia C5 works with Symbian S60 you won't be able to use Skype any longer. Please read this:
https://support.skype.com/en/faq/FA10389/has-skype-for-symbian-been-discontinued -
when i call someone who already connected with another call it doesn't show any wating notification. why? it is very important. all other mobiles have this option. Please give me some solution.
Your iPhone can take multiple calls. If you answer your phone from one person or call someone and another call comes into you, you will hear a beep and if you pull your phone away from your ear, you will see that you can hang up the call with the 1st person or answer the 2nd call and then swap between the two.
I have no idea what you mean by you calling someone who is already talking to someone. I've never been able to see on my iPhone that someone I'm calling is already talking to someone else. -
PC Sync to N95 with Outlook very slow
Hey There
I'm using the latest PC Sync on Windows XP Pro to sync with my N95 with the company Exchange/Outlook 2007.
It seems as though PC Sync is synching the whole calendar and contacts every time (2000+ items). We're talking so long that, if I'm working over a VPN from home, the phone times out after 15-20 minutes. The whole process is taking some 30 mins to complete this way!
Things are faster when docked at work or off-line, but waiting even 5 minutes with a few calendar changes in a day is crazy.
Any ideas what to do? Surely it doesn't need to re-read Exchange every time?
Thanks
--mcoUnfortunately there is a need to re-read calendar data from Exchange every time due to the fact that it is the only way to find out if something is deleted from the calendar.
But I think you can make the process faster if your Outlook settings are such that you use the cached exchange mode so you have full items locally in our Outlook always. Then you are not so dependant on the connection speed.
At least this is my experience or then my connection speed off work is fast enough and since I have autosync over bluetooth everytime I connect phone to pc, the sync is so seemless that I hardly ever even think of it, I am just synced.
Maybe you are looking for
-
I am trying to read font files on a server to create fonts. here is the url of the font file. http://localhost/myapp/fonts/arial.ttf I am using Font.createFont(Font.TRUETYPE_FONT, XXX ); method but I can't get a proper File or InputStream from this u
-
Hello everyone, as the title says, I am trying to use a motor called "MP285" by Sutter Instruments via LabView. The control unit of this motor only has a RS232-output, but I use a Serial-to-Usb-Adapter to connect the device to the PC. My problem is t
-
So today I update my iTunes on the laptop to iTunes 11. But, now all of my music is GONE. It's still saved in the laptop but now I have no idea how to import it all? Plus, all of my old music that I had previously deleted, reappeared.. So I deleted a
-
Foreign Languages on a MacBook
Hi, I'm from the small country Denmark, and I'm going to the states here in a little while. I noticed the prices on MacBooks are much cheaper over there, so I'm thinking of buying one while visiting. I have a few questions though. - Can I buy it with
-
Showing Zero values in OLAP Pivot Table for Excel 2007
Hello, I needed a help to a problem. Is it possible to show the values with No sales in an Olap Pivot Table ?? I have a sales Cube, and brwsing it via excel i wanted to filter on a Product Category and see how many products in this category had made