N95 with v20 firmware freezes when connecting USB

Does anybody have this problem?
USB ussually works fine, but *sometimes* (I believe it has something to do with pairing different bluetooth headsets during a lapse of time, but I haven't really checked it) when I plug the USB to the phone it just freezes and I have to take the battery out in order for it to work again.
Same problem anyone?
Regards,
Jorge

Here is the fix:
1. If frozen iTunes is open and iPhone is connected, right-click the task bar and select Start Task Manager.
2. Click on the Processes tab.
3. Look for the process distnoted.exe *32 entry.
4. Right-click and select End Process.
5. iTunes will now unfreeze.
6. Close iTunes and disconnect iPhone. Wait 15 seconds.
7. Reconnect iPhone. iTunes will launch automaticallly like it should and your iPhone will begin to sync like it should.
There appears to be an incompatibility issue with Apple's distnoted.exe process and maybe 64-bit OS's. All I know is that this works everytime although there doesn't appear to be a permanent fix to this issue. You may have to repeat these steps everytime you reboot your computer or update iTunes.

Similar Messages

My iPhone 5 is freezing when connected to the charger. This is not happinning if it is connected to the computer USB. How to solve this problem?

My iPhone 5 is freezing when connected to the charger. This is not happinning if it is connected to the computer USB. How to solve this problem?

Possibly faulty charger. The supplied Apple Charger is covered by the iPhone Warranty. Make Genius reservation or set up service and take or send iPhone and Charger to Apple for resolution.

BLACK SCREEN startup with 3 beeps, FREEZES when unplugged, Splash screen freeze, HEAT-UP TO BOOT

BLACK SCREEN startup with 3 beeps, FREEZES when power unplugged, IF IT BOOTS splash screen freezes, OVERHEATING REQUIRED TO BOOT - 0x7B, Event 41 kernel-powe
Issue: One day I unplug the power, the screen freezes and I get frozen music sound. I shut down, start up, I get 3 beeps (1 short 2 long), which indicates a Video failure according to the Thinkpad Laptop beep code list.
How I solve the issue day-to-day: I turn the heat up - I disconnect the battery and hard drive and plug in the power then turn it on. I will wait until the underneath is searing hot with a blanket blocking the fan's flow of air, I mean way hot because any cooler and it won't start. Plug stuff back in, Hard drive first, Battery second, turn off with power button hold, unplug power, replug power.
I turn it on, no beeps, it goes past the first Lenovo screen, then gives me a prompt because it "didn't shut down properly" and continue regular startup. What happens next is the Windows logo appears, and just as the animated windows logo starts to move (you see 2 small colored dots on the screen), it freezes. I see this every time, I know naturally that it means that the laptop is still too hot to go past that point, so I shut it down and try again. After about 5 - 10 tries it will go past the splash screen and into the login area, then it's all fine.
Sometimes when I unplug the power from the back by accident it will freeze. By accident I mean that the connector wiggles it's self out easily. This unplug freezing thing started happening about 1 week before the 3 beep black screen problem started rolling, so I'm putting 2 together.
Errors:
I got a Blue Screen of Death the first time I started it up with the overheating ritual, but I never got it since. It was 0X7B. I ended up changing a setting in BIOS from AHCI to Compatibility Mode, and I passed everything without the BSOD again. I have always had it on AHCI.
I got another Blue Screen of Death about a week ago, but came as it was on already and I had been using it, and said something about disabling Cache or Shadowing in BIOS. I never got it since.
BIOS:
Also, the time was set to 1988 or something in the BIOS.
Event Viewer events found:
1. Kernel-Power, Summary page.
There are critical events for a few things like Kernel-Power, Event ID 41, Task Category (63). There are 19 of them, each day 1 or 2 of them but mostly 1, so this maybe corresponds to my daily ritual.
"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
2. Kernel-Processor-Power - Event ID 37, task category (7)
"The speed of processor 1 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report."
3. LMS - HCMI - Event ID 2, Task Category: none
"LMS Service cannot connect to HECI driver".
I came across a very sluggish performing control panel for Nvidia before and after this problem, and I tried installing a newer version, which I had to jump through a few hoops to do, like uninstalling first, not just updating. At first it said that the driver wasnt made for the system, or that it wasnt compatible or something, which was wrong. I made it work somehow, but it was still sluggish after install. I rolled it back to an earlier driver, and now it works fine oddly. No sluggish performance / slight freeze window thing going on. No problem at all.
MSCONFIG.exe, Boot Advanced Options: I have tried twice to change this 1 setting, check box "Number of processors" and change to 2 processors, because I do have 2 processors. I have been able to change this in the past, but it does not save the setting now, and I believe this option was selected before I started having problems, and settings did not disappear then.
What could this be. The small round BIOS battery? The video card like everyone presumes? (I.E. the entire motherboard replacement), Software? The wiggly power input area? (Not enough power getting in?), Firmware of some sort? The BIOS software being wrong?
SYSTEM INFO:
Thinkpad T61p 6457-A24, Intel core 2 duo (T7700) 2.4GHz, Intel 120GB SSD 6Gb/s, NVIDIA Quadro FX 570M (256 MB),
Windows 7 64 bit Home Premium (6.1, Build 7601), BIOS Ver 1.00PARTTBLx
Display: 1680 x 1050 (32 bit 60 Hz), Integrated RAMDAC, Main driver: nvd3dumx.dll,nvwgf2umx,nvwgf2,
Version 8.17.12.9688, Date 5/31/2012, DDI version 10, Driver model WDDM 1.1

T61-Elwood wrote:
Laptops of all Brands using Nvidia GPUsmade from 2007-2008 are faulty.
You wont get good Nvidia ones on Ebay/forumes anywhere.
I'd beg to differ on both accounts.
*61 series nVidia-based ThinkPads from late January through July of 2008 are a 50/50 shot, since the old chips were mixed with the new ones. Any machine built in August and later can be deemed "safe".
As for the forums (I don't do feebay) there are people who sell genuine, properly-tested planars. However, these do not come at bargain basement prices, and with a good reason if I may add.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

IPod Classic 80 GB Freezes when connecting to Computer

Hi.
My iPod Classic 80 GB Freezes when connecting to my computer (Vista... yes... I know). I've got my iPod for over a year now and I've never had real trouble with it.
When I plug it in (iTunes already running) my computer gives me the 'thumbthumb' noise because an USB thingamajib is connected to the computer. At this moment my iPod freezes and stays on. iTunes doesn't seem to find my pod. When I disconnect my iPod, it'll stay on (doesn't go energy safe mode) and stays frozen until the battery is empty. But by then, I've already lost my playing info (Which I really value).
Pllllllease help me out her.

Someone has finally found a solution to this problem and i decided that i would spread the word around ... so here are the steps:
1) Quit iTunes.
2) Delete iTunes from your Applications folder.
3) Go to your ~/Music/iTunes folder. Delete or rename the "iTunes Library" file.
4) Open the "Previous iTunes Libraries" folder and look for the backup of your old pre-9 library; it should be dated at about the time you first ran iTunes 9. Copy it back out to the ~/Music/iTunes folder, and rename it to "iTunes Library".
6) Go to <http://support.apple.com/downloads/iTunes8_21> and download iTunes 8.2.1. The page says it's for G3, but the Read Me file says it'll run on G4, G5, and Intel too. Open the diskimage and run the installer.
You should now be able to run iTunes 8.2.1 again.
And your iTunes will restore to before you upgraded and you won't lose anything.
*If you download the iTunes file from the "support.apple" link, and you can't open it, go to http://www.mydigitallife.info/2009/06/28/apple-itunes-8-2-and-quicktime-7-6-2-di rect-download-links/ and download "iTunes 8.2 for Windows: iTunesSetup.exe
WhittWhitt

MBP freezes when connected to VGA projector

My MacBook Pro (15" 2.4Ghz SR, 4Gb) freezes when connected to a VGA projector, doesn't matter whether the DVI-VGA adapter is connected to cable first or last. Boot time while connected to the projector is also inordinately long. I have seen this happen a number of times specifically with other Santa Rosa MBPs.
I haven't called Apple yet on this and I suspect it will require a firmware update to fix; is this a known issue (and is it known to apple?)
thanks
--p

Just to update this thread with what I've posted elsewhere:
On my machine this problem only happens if the computer has been put to sleep before being connected to a projector. That is, put to sleep after being booted but before connection to the computer. It can be connected after booting without sleep. Once it has been successfully connected to a projector, it can be disconnected, put to sleep, awakened and reconnected with no problem.
I think that this "first sleep after boot" issue is what makes the occurrence of this problem so variable.
Some people just leave their computer on for long periods, only putting it to sleep when not using it. If they connected to a projector before putting it to sleep the first time they wouldn't see this problem.
Jim

Grrrrrr.... ipod Mini freezes when connecting to mac

when i connect to synch with itunes -
itunes does not recognize ipod
ipod freezes with regular screen (not the "do not disconnect" screen)
itunes recognizes my 40GB ipod and synchs fine; just not the mini
i have done the following with no success -
reset the mini (over and over)
put it in disk mode
reinstalled latest updater (ipod still freezes when connecting)
what could be the matter? please help ...
iBookG4 Mac OS X (10.3.9)

See these.
iPod doesn't appear in iTunes or on the Mac desktop.
iPod does not appear in iPod Updater or iTunes in Mac OS X.
iPod appears on the Mac OS X desktop but not in iTunes.

Computer is crashing (freeze) when connecting my iPod Nano

Hello,
my computer is crashing (freeze) when connecting my iPod Nano. I have a Pentium IV with windows XP Pro. Can anybody help me please.

This came from another thread, but worked for me. Problem is with newest iTunes 4.62. Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update). Reboot, and reinstall iTunes. It will reinstall all the other ones and you should be able to connect your nano. Good luck.

Does Mackie Control work with Final Cut 7 when using USB MIDI?

I have a Mackie Control Universal Pro connected via USB to my mac and it works GREAT with Logic and all the complimentary Logic Studio software.
The problem I am having is, when I try to use it with Final Cut, it wont work at all. I have read the post concerning this that was answered by Andy Mees but, I dont use a true MIDI connection, only USB.
Any thoughts?

Does Mackie Control work with Final Cut 7 when using USB MIDI?
No one will know until FCP 7 is released.
-DH

Issue with 2wire dsl router when connecting power pc g4 via ethernet

Issue with 2wire dsl router when connecting power pc g4 via ethernet. The 2wire will keep resetting. When I connect my macbook pro via ethernet to the 2wire all is ok, but as soon as i connect the power pc. . . .reset. I have emailed 2wire support. They recommended using a different patch cable. Tried that.. .. anyone else having this issue???? Any help would be appreciated. . .

Search the discussions for issues with 2wire dsl routers. This has come up before in a discussion I've been involved with, but probably not to do with the MDD. I do remember it being a design issue with the router, something that was done to it before dispatch.
Let us know if you can't find it and we'll have a look.
If you afford it, bin the 2wire and go buy something decent like a Netgear.

ITunes and Computer freeze when connecting 160GB iPod classic

160 GB iPod Classic
Model: MC293LL
Version: 2.0.4 PC
iTunes version: 11.1.3
computers: 1 Win8 desktop,
1 Win7 Home Premium, Service Pack 1 Notebook
since yesterday I started having trouble with my iPod. When connecting it to the Notebook it showed a message: "There's a problem with this device. Scan the drive now and fix it". After clicking on scan and trying to fix the problem the notebook froze, so I connected it to me desktop, and it worked, it said that the problem was fixed. But when trying to open the iTunes it froze and after disconnecting it I realised the music was gone. So I connected it again, the same "There's a problem with this device. Scan the drive now and fix it"-message showed, but at the end the computer said it didn't detect any problem with the drive, so I opened iTunes and restored the iPod, and it worked but after that iTunes froze, then Windows Explorer and then the whole computer. Tried to connect the iPod to the Win7 Notebook and the same thing happened, first iTunes froze and then the computer froze, they both didn't show the blue screen.
What can I do? The iPod was already restored to the factory settings.

i had the same problem. all i did was download the newest version of itunes, which i had been putting off for months because it takes so long. after i did this itunes worked fine for me
hope this helps

Mac Mini mouse freezes when connected to interactive white board

Our school district has several Mac Mini's (OS 10.4.11) connected to interactive white boards (Smart). With regularity the mouse and/or keyboards will "freeze", often in the lower left hand corner of the screen, and will only operate normally when the USB cord for the Smartboard is disconnected. Then all functions of the computer return. This effectively means that the interactive whiteboard is no longer useful. Has anyone else encountered these issues with Macminis? Could it be a software issue??
Additionally I have had constant problems with our Mac minis "freezing" in our computer lab when students are working on them. If they have several applications open this happens regularly. Are these machines prone to freezing?

Yes sounds like you already know the answer. I'd contact Smart or whomever makes this whiteboards to see if they know about compatibility with the macmini's you use.
As far as being prone to freezing no I've not seen any long or lengthy threads about freezing or other such complaints around here so I don't think so.
I've had my mini for almost a year now and push it pretty hard and find it almost impossible to make it freeze,reboot,lockup or any such thing myself.

Macbook Pro Freezes When Connected to iPod Classic!

I have a mid 2010 Macbook Pro that is acting a little funky. Whenever I plug in my iPod Classic to add music everything works perfectly fine until I eject the iPod. My computer then basically freezes up (gives the rainbow spinwheel of death) and it will not recover. The iPod icon doesn't disappear, it just turns light grey and everytime my only option is to force quit iTunes. The problem doesn't end there, my computer is completely bogged down and I have to force shut it down. It is incredibly annoying... The iPod works perfectly fine when I plug it into my fiancee's older Macbook Pro, it ejects fine and I've run disk utility on it using that computer and there are no problems with the iPod. My mid 2010 Macbook Pro runs other USB devices just fine (iPhone, iPad, Flash Drives etc.) it's just the iPod.
Additionally, every since I upgraded to OS X 10.7 the computer will not shut down/restart. It just goes to a grey screen with a spinny wheel and won't fully shut down (I've left it over night to no success still grey screen). I have reinstalled OS X several times so I'm confused on this one as well. Any information on either of these issues would be greatly GREATLY appreciated.

I should add that I can quit iTunes with the iPod connected. When I try to eject the iPod by manually dragging the icon to the trash the funkiness begins (icon doesn't disappear just turns light grey, and the computer freezes). I have found the computer behaves if I put it to sleep with the iPod connected (the iPod will eject properly) and when I wake the computer up, everything works w/o funkiness, however the greyed out iPod icon will still be on the desktop. This is the only way I've found to be able to manage this iPod when connected to this MBP.

ITunes freezes when connecting ipod

I just recieved my 60GB iPod video and followed all the instructions exactly as supposed to...
Step 1 was loading the software, which I had no problems with
Step 2 was importing music to my computer, which I already had from my previous iPod
Step 3 was connecting the iPod, this is where I ran into problems!
I connected the iPod and the "Do not disconnect" screen was flashing on the iPod as it should, but iTunes did not open. When I tried to open iTunes myself it was frozen. I also tried to see if the iPod was appearing in windows explorer but that was frozen too. When I disconnected the iPod, iTunes and windows explorer began to run perfectly. I've spent 3 hours reseting, reloading and restarting everything but nothing has worked. Also, my laptop is very new so I'm pretty sure that's not the problem. If anyone knows what to do please let me know!

I am having the same problem of my PC freezing when I plug in my 60 Gb iPod. My PC is runnging Windows XP professional. If the iPod is plugged in to the USB port everyting but the mouse freezes. As soon as I unplug the iPod the PC works perfectly. I uninstalled iTunes and the iPod utility and I still have the same freezing problem when the iPod is plugged in. I have a feeling their is a conflict with the iPod and my USB which is USB 1.1. When I plug the iPod into my Sony Vaio laptop everthing works perfectly. I am gooing to get a USB 2.0 and try that next. .
George

Itunes freezes when connecting and ipod does not show up

When I connect my nano 3rd gen in windows vista using itunes 9 my ipod does not show up and itunes freezes. the ipod remains with the connected screen and I cannot close out of itunes. Any help would be wonderful... Thanks!!

I have (finally)solved the problem with my iTunes freezing! Here's what I did:
1.I backed up my entire music library to an external hard drive.
2.Then I completely uninstalled iTunes 9 from my computer.
3.After a re-boot I then completely deleted my entire music library. (this can be a little scary so I double checked my music library back up on the external drive)
4.I Googled iTunes 8 and found it at
http://www.mydigitallife.info/2009/06/28/apple-itunes-8-2-and-quicktime-7-6-2-di rect-download-links/
5. I downloaded it but before I installed it I copied my music library back to my computer. I did not copy everything that was in my original iTunes music folder however, I only copied the music,album art work, applications,games,Tv shoes, and podcasts folders. I placed those folders in a new folder called iTunes on my computer. I did not include any of the iTunes database files eg: .itl / .xml / or .itdb files as these were created in iTunes 9.
6. Now I opened iTunes 8.2 and added all of my music and other media content.
7. Next I attached my iPod nano to my computer. Then Windows automaticly open a window asking me if I wanted to scan for problems or continue without scanning. I had windows scan for problems and once that was done my iPod nano began to sync. Oh what joy!
I think, and this is only a guess based on what I've read here on Apple's discussion pages and my own experience, that there is a problem/conflict or bug with iTunes 9, Windows Vista and the 3rd -4th generation iPod. I will NOT be upgrading to iTunes 9 until Apple has addressed this issue. It seems to me that there are a lot of people having similar issues.

Ipod not being recognized/freezing when connected to computer

Hey all
My Photo Ipod has stopped syncing with my computer. When I plug it into the firewire cable it just freezes on whatever screen it is on and doesnt appear in Itunes, or under My Computer. I have tried resetting the Ipod while it is connected to the computer, it gets so far as the apple screen and then locks up and stays on that screen till I unplug it. I know the issue is not the dock connector, because it works just fine when I plug it into my FM Transmittor in the car. Any help would be appreciatted.
Thanks

Have a read
http://discussions.apple.com/thread.jspa?messageID=2001071#2001071

N95 with v20 firmware freezes when connecting USB

Similar Messages

Maybe you are looking for