N95 WLAN makes my Linksys hang

Really with my N95, but...
When I use my home network's WLAN to browse the web for about five minutes, the connection is lost
Worse, it is actually the wireless Linksys router that hangs up. My laptop cannot find it either. The only way to get the WLAN back is to power off/on the router. N95 finds the WLAN after that without having to power it down first.
Am I the only one with this problem or is this a known firmware issue?

To follow up this post:
With *#0000# I got:
V 12.0.013
19-06-07
RM-159
Nokia N95 (D5.01)
I purchased a Netgear WPN824 RangeMax router and I still got problems with the hanging WiFi connection on my Nokia N95. Only that this time it was the N95 that got frozen and not the router. I found the following remedy with the search engine:
Menu -> Tools -> Settings -> Connection -> Wireless LAN -> Options -> Advanced Settings -> (Warning..) Yes -> Automatic Configuration (Disabled) -> Power Saving (Disabled).
After I disabled the power saving feature the connection remained stable even if the signal level was medium or low. Previously in these cases I got quickly stuck both with Netgear and Linksys ADSL routers.
To be noticed that I have never had problems with N95 in our corporate WiFi network where the signal level is high everywhere. Clearly this is a compatibility issue in the handshaking between the router and N95 in the case the latter decides that it is time to cut off for a while in the sake of the battery life.

Similar Messages

  • N95 WLAN powersave, too agressive!!

    N95 WLAN powersave is so agressive that it cannot even be used for a decent VOIP call. Trying do download a 20meg podcast is close to impossible. After deactivating the WLAN powersave, all works OK. Everything but my battery life that is.....
    H

    N95 WLAN powersave is so agressive that it cannot even be used for a decent VOIP call. Trying do download a 20meg podcast is close to impossible. After deactivating the WLAN powersave, all works OK. Everything but my battery life that is.....
    H

  • N95 WLAN Connection problems - Orange Livebox (UK)

    I am trying to get the N95 to connect to the internet wirelessly through Orange Livebox (UK). I have run the WLAN wizard and the phone has identified it. I have input the WEP key and thats worked fine.......except everytime I try to connect to the net via this method I get a connection error. Has anybody else had WLAN connection problems? Can anybody help?

    hi,
    did you press "1" button at the back of the Livebox before pairing ?
    what kind of error message do you get on the N95 ?
    does it fail the same way when you go through the homescreen "WiFi scanning / Start Web Browsing" or through Tools / WLAN Wizard ?
    Cheers,

  • N95 WLAN Browsing Costs and Packet Data

    I have recently purchased an N95 and am accessing the Internet via my home Wireless Network provided by Virgin Media instead of using the standard Access Point provided by the Mobile Operator i.e. Orange Internet - by doing this, I assume I would incurr no charges from Orange when surfing the Internet as I am using my own Broadband connection?
    A seperate question, but related, how does the Packet Data transfer work? My default Access Point for this is Orange Internet, is this a different thing to the WLAN Access Point i.e. my Home Network or is is related? Does the Packet Data work when I'm connected to the Internet or is it mainly for messaging etc? Should I change the default Access Point for this to my Home Network or leave it as it is i.e. Orange Internet?

    Hi sj219706
    In answer to your first question, there are no further costs incurred using WLAN with your Virgin Media Broadband connection.
    With regards your second question it depends a little upon how generous your GPRS = General Packet Radio Service data allowance with Orange is.
    Can I use Nokia Maps application as an example? Unless disabled an active network connection is needed, this may either be through GPRS(Orange) or WLAN(Virgin Media). If you are within range of your WLAN this is your preferred access point.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • WLAN 4402 Access points hang or reboot

    We are seeing a very strange issue in our WLAN setup. Our access points hang or reboot randomly. We have WLAN controller 4402 with 25 Cisco 1020 Access points. Our syslog server shows for some access points rebooted. While others just hang and then come back online after 10-15 minutes. We have similar code 3.2.78.0 running at other sites and everything seems to be stable, therefore we do not want to upgrade or install a new code. Any suggestions, or help will be highly appreciated by the experts.
    Thank you
    Ismail

    The errors we saw were "[ERROR] spam_lrad.c 1840: AP 00:0b:85:66:77:88 associated. Last AP failure was due to Configuration changes, reason: did not get join response"
    We called Cisco TAC, got the case escalated to the highest level possible, till we got hold of the actual developers of the code. Gave Cisco engineers the Sniffer packet information of the wlan controller and AP.
    Finally Cisco engineer found a bug in the code 4.0.179.8 The bug will be fixed in the next release.
    Thank you
    regards,
    Ismail

  • Lauching firefox with -chrome option in Mac machine make it to hang. We are calling ./firefox - chrome chrome:// URL

    We have written a firefox extension to launch a web site from the applicaiton. We are launching the firefox using the command
    ./firefox -chrome chrome://iolaunch/content/temp.xul.
    till 3.6 it used to work fine. but in 4.0 the above command make the firefox to hang.
    the content of the xul file look like below.
    <?xml version="1.0"?>
    <overlay id="iolaunch-overlay"
    xmlns="http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul">
    <script>
    var Cc = Components.classes;
    var Ci = Components.interfaces;
    cookie_manager = Cc["@mozilla.org/cookieService;1"].createInstance(Ci.nsICookieService);
    uri = Cc["@mozilla.org/network/io-service;1"].getService(Ci.nsIIOService).newURI('#URL#', 'ISO-8859-1', null);
    cookie_manager.setCookieString(uri, null, 'X-Login'+ '='+ '#Info1#' , null);
    cookie_manager.setCookieString(uri, null, 'X-Token'+ '='+ '#Info2#' , null);
    cookie_manager.setCookieString(uri, null, 'X-Go'+ '='+ '#Info3#' , null);
    </script>
    </overlay>
    can you tell me why this does not work. Infact none of the chrome URL is getting loaded in firefox 4.0.

    You need to use file:// as the protocol instead of C:/. The latter may never work (C:\ might).
    Where is the main HTML located ?
    Easiest if to store the images in a sub folder of the location because you can't go back via ../ beyond that root location for security reasons.
    See:
    *http://kb.mozillazine.org/Links_to_local_pages_do_not_work

  • Zen Micro (While Charging) makes my computer hang when opening/browsing My Compu

    quick question that I can't seem to find an answer for.
    everytime I open my computer to browse my hard dri'ves, it hangs for a few seconds, starts up the Zen Micro, and then shows the icons and lets me browse.
    of course this is only while charging but it is still very annyoing. I also use a quick bar that links to My Computer, and it also hangs when I access that.
    I am guessing its some sort of auto start function, but is there anyway to disable it so that the Zen doesn't turn on and slow down my computer habits?
    thanks for the replys. I can give more indepth information if needed.
    thanks
    -=kaitou=-

    lol. I figured it out in the Windows Registry.
    If anyone else is interested in cleaning up My Computer so it doesnt show Removable Zen Micro Dri've and Zen Micro, go to:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Explorer\MyComputer\Namespace\Delage Folders\
    and delete the key for Zen Micro and Removable Dri've.
    this makes it so that your Zen won't boot up everytime you go to My Computer.
    ;0 hooray!

  • N95 WLAN Problems

    I am having problems connecting to the internet using my WLAN at the office. The connection allows me to connect ot the local intranet in the office but when i try to connect to the internet error message appears as "Gateway No Reply". I have checked all the IP's and Login including the WEP key everything seems fine. Can anyone Help Me?

    One thing to check would be to ensure your DNS IP is set. From previous experience the N95 returns the same message if it is unable to resolve hostnames to IPs.
    Alternatively your work environment may have a policy of only allowing certain IP addresses out on the internet.Message Edited by edwardquan on 07-Aug-200708:54 AM
    Regards,
    Edward

  • N95 - WLAN Question

    Is it possible to connect my phone to my PC using WLAN, but without a router??
    I don't have access to the internet at home, but would like to transfer images and music without having to connect using a data cable or taking my memory card out every 5 minutes
    V12.0.013 19/06/07 RM159 Nokia N95 (66.01)

    I'd recommend Bluetooth as a better option...
    Never thought about going wireless without the internet...
    You could get an Wireless Access Point...
    I guess it'd be possible in theory, I'm not sure how much connectivity you'd get though, it wouldn't connect to PC suite... and you'd have to enable File Sharing in the Home Network settings...
    Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
    Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

  • InDesign CS5 v7.0.4 won't make a package - hangs at very end of progress bar.

    Using InDesign CS5 v7.0.4 trying to simply make a package. The progress bar (moving very slowly) hangs at the last percentage and doesn't complete the process.
    Any ideas of how to fix this??

    Every file or one particular file?
    If one particular file, try exporting it as IDML and reopen in InDesign. If all files, try restoring your preferences.
    http://forums.adobe.com/thread/526990

  • N95 WLAN share for PC browsing

    How can I share N95's WLAN connection via USB cable to PC and browse internet?
    With other words:
    Dial-up connection but using WiFi (not GPRS/EDGE/UMTS/HSDPA access point)?
    With other words:
    Using my N95 as Wireless card to share its WiFi on the PC?
    Smile is Health. Keep your Smile

    No can do. Buy an USB WLAN dongle, instead.

  • N95 wlan web no gate way reply

    hi. i have a nokia n95 and i get this message web: no gate way reply with most of the wlan connections i connect to. before i upgraded to version 21 of the FW, it was ok but after some wlan hotspots worked and some didnt. At my college where i used it the most it stopped working. i decided to reinstall the firmware but it still didnt work and the ones which did work dont seem to be working either. i read all the other suggestions but nothing helped.(disabling the power saving option) so please help me out. Thanx. Maz.

    I've had the same problem.Try doing this:
    Menu > Tools > Settings > Connection > Access points.
    Try deleting them all except those from your operator.Those from your operator should be marked with an icon two arrows pointing in the opposite direction and the wi-fi access points with circle and four little squares in it.
    Bling_Bulgaria.If you find my answers helpful click the Kudos button. Nokia 3300 > 6681;N82,V31.0.016,RM-313

  • IOS 5.0.1 makes iphone 4s hang up?

    Hi,
    since updating IOS to 5.01. my iphone gets hang up more frequently. even at the locked screen, i couldn't type my password to unlock it. seems no place on the screen works, i tried to type again and again. also when i view photos in camera rolls, i when i view it in landscape position, and want to view back to the portrait position i changed position of my phone but the photos didn't move back to portrait position no matter how i keep the phone vertical.
    any one encounter with this problem?
    tks.

    okay,
    so, i had a 3GS, backed that up.  - thats the backup.
    then, bought a new 4S. and wanted all my apps, camera roll, texts. and so, did a restore. (not sure if thats the term to use.)
    Later, just using the phone, i did a 5.0.1 update (just updated thought the phone, the delta update)
    Thats where I am now.  From what i've read. next things to try are:
    1. Just "Reset all settings" on the phone. This sounds quick and easy, and I don;t think i'd loose much?
    2. Restore from backup. - thats where i wondered about 5.0.1 - as itunes never downloaded that, but from what you say i think.. iTunes will download that for me, so I should not worry, and just do the usual backup/restore.
    Then, i think its time to show the phone to a genius in an Apple store, and just show them how it randomly locks up for several seconds..
    Just wanted to make sure i'd done all the usual stuff before seeing the genius, incase they just say, to go home and try the restore.. etc.
    Thanks,
    Keith.

  • How to freeze or make an application hang to test a script?

    

I like to test this script
    tell application "System Events" to set theApps to name of processes whose background only is false
    repeat with oneApp in theApps
    set pState to do shell script "/bin/ps -arxo state,comm | /usr/bin/grep " & oneApp & " | /usr/bin/cut -c 1"
    if pState contains "Z" then -- if the application hangs, kill it
    tell application "System Events" to set pid to the unix id of process appname as Unicode text
    do shell script "/bin/kill " & pid
    end if
    -- delay 5 -- security delay
    try
    do shell script "open -a /Applications/Restart.app"
    end try
    end repeat
    It is supposed to run from time to time on my server checking if a programme is hanging and if so quitting it and restarting it.
    So does anybody know how one can get a programme to hang or crash? Did several experiments with Text Edit, but could not get it to crash. Interesting question though, as we are mostly concerned about crashes not happening.
    Any ideas or suggestions are welcome. 

 Thanks

    orangekay thanks
    I tried that but did not work (might be my lack of skill), or might have done it wrong though, any suggestions as to how?

  • Nokia N95 Wlan Wizard has stopped working

    Hi
    Ive had my phone since July and my wlan wizard had been working perfectly up till yesterday. I checked the wlan wizard details and it says the signal is strong 100% and my network is named etc, there does not seem to be a problem there. Everytime i try to start web browsing the browser wont load, the screen refreshes but just stays on the Wlan Wizard screen.
    Anyone have any suggestions on how to fix this??
    many thanx
    Dawn

    @ mizz71,
    Have you configured your access point prior to browsing the internet? The wizard only tells what is the available WLAN access point(SSID), you have to select which one you wanted to use be it secured or open.
    Message Edited by android on 15-Dec-2007 07:56 AM
    Knowledge not shared is knowledge wasted!
    If you find it helpfull, it's not hard to click the STAR..

Maybe you are looking for

  • How much lifespan should I expect from MBA 2013?

    Never been into Macs before, but finally going with one. My laptops usually lasted me 2-3 years. How much would a standard macbook air last? and what if I add 8GB Ram ( not money issue, but rather that I might not find it available where I live.) Use

  • Why has my iPad mini screen cracked?

    This week I put my iPad mini in the same place I usually do before I go to bed, I plugged it in and left it to charge over night.  I came back in the morning to a cracked screen, it is still in perfect working order, just cracked.  The cracking looks

  • Planned delivery cost payed before GR

    Hi all experts, We are analyzing to use transportation for planned delivery costs and freight. We will have multiple legs (steps) in a route and let's say that the end to end transport will take approximately 30 days to complete but we would like to

  • I cannot watch movie purchased on macbook pro running mavericks

    cannot view movie in itunes. purchsed and downloaded. can view images as i move the movie forward but does not play. very unhappy.

  • Can't burst by email using Document Processor API

    I am using the API's to burst a file. I can burst to teh printer and filesystem - no problem. But when I attempt to burst via email I get this error: [EXCEPTION] oracle.apps.xdo.delivery.DeliveryException: Document file [EXCEPTION] Error!! Could not