N95 - won't store call log for more than 24 hours

My N95, locked to orange, has all of a sudden lost the ability to show me the last 30 days of my calls. I have tried to reset the phone, changed the log setting from 1 day to 30 several times, but all to no avail.
I have tried restoring my phone, again no joy.
Does anyone have any ideas ?
Thanks
Colin.

I followed the tip of Linc Davis (recovery mode, then disk utility, then turn off incryption) and it worked perfectly.
Great help
Constance

Similar Messages

Nokia X6 stores call log for only 3 days

My new Nokia x6 stores call log for only 3 days even though i set up it for 30 days? Any one facing this issue? How to overcome this? PLs help. Thanx in advance...

Have read on this forum.. suggesting to first change the Call Log duration to say 1 day.. Re-boot the phone .. then change it back to 30 days.. and re-boot the phone..
..also in some cases the no. of entries also caused the problem.. though the setting is for 30 days if there is a lot more no. of entries under the log.. it is getting erased automatically.. Some users pointed out that it was happening in their case when there are few applications that required periodic connection to the network for updates (like e-mail, weather applications, etc..) and frequent logs were getting created...
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

My macbook pro won't hold a charge for more than a day...do I need a new battery?

my macbook pro won't hold a charge for more than a day...do I need a new battery? I have a 13" early 2011 model.

A: did you leave most of the time or always plugged in?
B: did you often drain the battery very low?
If so, then thats the issue
From Apple on batteries:
http://support.apple.com/kb/HT1446
http://www.apple.com/batteries/
Storing your MacBook
If you are going to store your MacBook away for an extended period of time, keep it in a cool location (room temperature roughly 22° C or about 72° F). Make certain you have at least a 50% charge on the internal battery of your Macbook if you plan on storing it away for a few months; recharge your battery to 50% or so every six months roughly if being stored away. If you live in a humid environment, keep your Macbook stored in its zippered case to prevent infiltration of humidity on the internals of your Macbook which could lead to corrosion.
Considerations:
Your battery is subject to chemical aging even if not in use. A Lithium battery is aging as soon as its made, regardless.
In a perfect (although impractical) situation, your lithium battery is best idealized swinging back and forth between 20 and 85% SOC (state of charge) roughly.
Further still how you discharge the battery is far more important than how it is either charged or stored short term, and more important long term that cycle counts.
Ultimately counting charge cycles is of little importance. Abuse in discharging (foremost), charging, and storing the battery and how it affects battery chemistry is important and not the ‘odometer’ reading, or cycle counts on the battery.
Everything boils down to battery chemistry long term, and not an arbitrary number, or cycle count.
Keep your macbook plugged in when near a socket since in the near end of long-term life, this is beneficial to the battery.
Peace

Itunes store does not open in my computer. I need help...I have worked on this issue for more than 10 hours. I am about to return my new ipod touch.

I do not have access to itunes store. I tunes store was working well with my old ipod with 30GB wich i had for about 6 years. I went to the store to have the battery replaced. However, I was told that my ipod was ready to be recycle. I received 10% discount to buy an ipod touch with 60GB +. When I connected the ipod touch to my computer, i did not have access to itunes store. Also, none of my music was synced. In addition, the icon for my ipod showed that the battery was not charged even though I charged the ipod touch for more than 8 hours prior to conneting it to the computer.
I have installed the latest version for itunes 10.6.1. Still I do not have access to itunes store. I have put more than 10 hours trying to solve this issue. I have become frustrated and ready to return my purchase.
Please help

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

My iPhone 5s won't turn on. Its battery was drained for more than a month. I tried charging it for more than an hour then pressed reset but it still won't turn on. What could be the problem?, My iPhone 5s won't turn on. Its battery was drained for mo

My iPhone 5s won't turn on. Its battery was drained for more than a month. I tried charging it for more than an hour then pressed reset but it still won't turn on. What could be the problem?, My iPhone 5s won't turn on. Its battery was drained for more than a month. I tried charging it for more than an hour then pressed reset but it still won't turn on. What could be the problem?

You said "reset," so Meg assumed that's what you did. But "reset" is not a button; to reset the phone you must hold the HOME and SLEEP buttons at the same time until an Apple logo appears. You may have to hold for up to 30 seconds, and if the battery was completely drained, you will have to restore iOS using iTunes on your computer.

My 5th generation 30gb ipod won't play for more than an hour...

my 5th generation 30gb video ipod will not play for more than an hour or two.. can you help??please??

Keep iPhone on Wall Charger and Reset, hold both Home and Power buttons until the iPhone begins to start. This can take 20 seconds of holding both buttons while on charger.

Error message that no virtual memory pops up & crashes when application is run for more than 1 hour

My application uses VISA serial operations. It has arrays to store data collected from various devices. I reinitialise the arrays each time the index reaches 50.
Data acquisitions is carried out in separate threads by invoking the runVI method.
When i run the application on Win XP continuaously for more than 1 hour it gives an error message that no more virtual memory to complete the task and the system hangs up.
I open the serial port only once and close it when the application is terminated. But serial read/write operations are done continuaously
Is the error caused due to memory leakage? How can i solve the problem. It's very urgent and i shall be thankful if i ge
t the help.

Yes, it sounds like a memory leakage (either that or you're trying to run an advanced app on an old computer w/ little memory and a small hard drive).
Things to try:
1. Ensure it's only labview, and not say labview and another application interacting. This isn't a likely case, but you never know what people have on their boxes and I've seen some weird things with virus scanners. Hit Ctrl-Shift-Esc to get the task manager. Go to processes and watch the memory consumption (click Memory twice to sort in descending order) of the various processes. If labview keeps rising, you've got a leak.
2. If only a reasonable amount of memory is being used, double check your page file settings (read virtual memory).
From the Control Panel
Select System
Select
Advanced Tab
Under Performance, select the Settings button
Select Advanced Tab
Under Virtual Memory, let windows dynamically adjust the page file (and any XP speed tweakers out there can now chime in about how wrong this is. This essentially allows windows to keep upping the virtual memory as needed by various processes.
3. Find the leak. In LV Tools->Advanced->Profile VIs. Turn on memory stats. Start the profiler. Start your vi. If the vi crashes labview totally, you'll have to keep hitting snapshot to find the leaky vi (the one that's memory keeps growing).
4. Upload the vi to the forum so we can give it a looksee.
G'luck
2006 Ultimate LabVIEW G-eek.

Kindly refer to Case Id No. 525700065 in India.I have talked to various people on my case for more than 5 hours ( Total talk time) The people give various different answers and aim really fed up now. What do i do? Many apple phone users are especially fed

Kindly refer to Case Id No. 525700065 in India.I have talked to various people on my case for more than 5 hours ( Total talk time) The people give various different answers and aim really fed up now. What do i do?
Many apple phone users are especially fed up with RSGI Communication , Erandwana, Pune, Maharashtra, India.
Their service report No. 36679.
Allthough Mr Punit ( Technical Dept. Apple.) had requested RSGI to chance the device, still RSGI said they do not have the device ( I phone 5, white ,16GB) in stock.
Today when we contacted them they said they won't be able to replace OR order to Apple unless and until we do not keep the device with them for 3 days.
Mr Deepak of Technical Dept Apple was contacted who's telephonic Transript as proof is available with us.

Who exactly are you addressing your screed to
There are no Apple Staff on this forum ,it is User to User

Change Capture For Siebel OLTP task in DAC running for more than 10 hours

whole etl load used to complete in 2 hours (as on now siebel data having sample data). since last Friday Change Capture For Siebel OLTP task in DAC execution plan running for more than 10 hours. I am not able to trouble shoot the problem because no log for this task
what could be the reason for this problem? how can I fix that problem?
Appreciate your help
Thanks
Jay.

Which ETL is it that is taking the longest (is it an SDE, SIL, PLP?). I have seen someOracle vanilla ETLs coded in a way that is very ineffective. Check the DAC and Informatica logs and find out which mapping it is and where the delay is (e.g. SQL, write to DB..etc).

Phase MAIN_SHDRUN/ACT_UPG is running for more than 24 hours

Hi All,
we are upgrading our ECC 6.0 system to EHP04 SPS6. and the phase "MAIN_SHDRUN/ACT_UPG" in pre-processing phase is running for more than 32 hours. I am wondering how much time it will go. below are the details of our system:
1. total DB size : 600 GB (used)
2. CPUs: 4 (AIX p5 processors)
3. RAM : 18 GB
4. R3trans/Batch processes selected: 5 (each)
I am able to see the latest entries in log fille under EHPI\abap\tmp.
1 EDO533X*** Activate objects at level "309"
3 EDO635 Not enough work processes (total of "2", "1" can be used)
3 EDO634 * Synchronous execution, no parallel processing *
3 EDO680XSynchronous processing: "0" sec., "11" objects, "12.180" costs
1 EDO533X*** Activate objects at level "310"
3 EDO635 Not enough work processes (total of "2", "1" can be used)
3 EDO634 * Synchronous execution, no parallel processing *
3 EDO680XSynchronous processing: "1" sec., "35" objects, "23.660" costs
some processes are running. I am able to see from topas. it seems to be some I/O issue.
still wondering. how much time it will run. this is the production system.
Thanks,
Mohan

Hi,
> 1 EDO533X*** Activate objects at level "309"
> 3 EDO635 Not enough work processes (total of "2", "1" can be used)
> 3 EDO634 * Synchronous execution, no parallel processing *
> 3 EDO680XSynchronous processing: "0" sec., "11" objects, "12.180" costs
> 1 EDO533X*** Activate objects at level "310"
> 3 EDO635 Not enough work processes (total of "2", "1" can be used)
> 3 EDO634 * Synchronous execution, no parallel processing *
> 3 EDO680XSynchronous processing: "1" sec., "35" objects, "23.660" costs
>
As you can see in the logs system does not have enough work processes to do parallel processing. So, it will take time.
Also how much background work processes your system have ?
Thanks
Sunny

HT4463 I purchased Aperture then it installed and the download bar has been about halfway for more than 8 hours. What's the problem? How can i fix?

I purchased Aperture then it installed and the download bar has been about halfway for more than 8 hours. What's the problem? How can i fix?

Mac App Store: How to resume interrupted downloads
http://support.apple.com/kb/HT4485

G5 idle for more than one hour

when i leave my G5 idle for more than one hour, when i enter my password, the system locks. i have to shut off the computer and turn it on again...

Try restoring the iPod to factory settings/new iPod.
If still problem then I would make an appointment at the Genius Bar of an Apple store and hear what they have to say.
If a bad battery:
Apple will replace it for $79
A third-party place is less expensive. Here is one:
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace it yourself.
iPod Touch Repair – iFixit

I am trying to copy more or less 30G from my MacbookPro to an external hard drive and it is stuck in the "preparing to copy" step. But that for more than one hour. What should I do to make it faster? Thanks a lot in advance!

I am trying to copy more or less 30G from my MacbookPro to an external hard drive and it is stuck in the "preparing to copy" step. But that for more than one hour. What should I do to make it faster? Thanks a lot in advance!

Thanks Shootist007, by blockd files I mean files that I have changed to blocked and when I tried to move then for the first time, I had to unblock again. I am trying to backup my pictures, my songs and other files like word documents and excel tables. First I put all of them as blocked, what caused the first problems on trying to move them. Then, I've unchecked the block option and if I try to move one by one, there is no problem. The issue is to move all together, because it gets stuck in the preparing to copy files step. Anyway, if I cannot do all by once, I'll do it one by one, event though that was not suposed to happen if we are talking about technology, right? Anyway, I thank you again for trying to help me!

Am in the process of installing ios 7.0.4 for my ipad 2 however, all I see on the screen is the USB cable and an arrow which point to iTunes icon. It has remained so for more than 1 hour. When I put it off and switch it on again, I see the same thing

Am in the process of installing ios 7.0.4 for my ipad 2 however, all I see on the screen is the USB cable and an arrow pointing to iTunes icon. It has remained so for more than 1 hour. When I put it off and switch it on again, I see the same thing appearing again. what sholud I do?

This is the solution to your issue.
I wish you the best of luck.
http://support.apple.com/kb/ht1808?locale=en_AU&viewlocale=en_AU

I am trying to upgrade my macbook pro to os x mavericks, but it has been on the reboot process for more than 2 hours. There is only the apple logo with the spinning ball thing. What should I do?

I am trying to upgrade my macbook pro to os x mavericks， but it has been on the reboot process for more than 2 hours. There is only the apple logo with the spinning ball thing. What should I do?

Hi there Candyleehoiman,
I would recommend taking a look at the troubleshooting steps found in the article below.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
-Griff W.

N95 - won't store call log for more than 24 hours

Similar Messages

Maybe you are looking for