N95 wont write text in letters only symbols when u...

my n95 stopped writing in text only symbols ie on pressing "a" on key pad i get a open bracket and so on through alphabet differing symbol for each letter. also on keying in a phone number the same thing happens . this problem started last night on getting up this morn on switching phone alarm off it went back to normal able to text in letters then half way through morn reverted to only typing symbols. had this phone 3 years never had this problem before. also went on nokia site and re installed fimware this did not help . think i might be missing somethig here any ideas thanks brian
Solved!
Go to Solution.

If a firmware update didn't help you then it's quite possible that the hardware needs to be inspected. Better take it to a Nokia Care Point. The keypad might need servicing. 3 years of continuous use will mean a lot of dust under the keys.
Cheers,
DeepestBlue
5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

Similar Messages

N95 wont send texts

my n95 wont send messages, it jst comes up wit an info box
"general: memory full, close some applications and try again" so ive deleted some texts and i have no applications running. any ideas
ash x

16-Jul-2008 11:25 AM
npearson1983 wrote:
the issue is more than likely the sim card rather than the handset due to its massive memory.
contact your network provider for a replacement simcard, this should resolve your issue. older sims have a much smaller internal memory built in and only support something like 10 texts.
goodluck
Text messages aren't stored in the SIM on an N95.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Only symbols when converting

When converting, all my text is converted into symbols and not in text. I tried to switch the text recognition off, but conversion still did not work. Please advise

Hi f1984,
Let's see what we can figure out. Disabling OCR often does the trick, so I'm sorry that it did not in your case.
I'll need a bit more information about what's going on, before we can get to the bottom of the problem.
Does this issue occur with a specific file only?
How was the PDF created (you can tell by choosing File > Properties in Adobe Reader.)
What OS/browser are you using? Try a different browser, or clearing the browser cache)
Are you converting from within Adobe Reader, or directly via the ExportPDF website?
Please get back to me with those details, and we will take it from there.
Best,
Sara

When using photo mail with PS12 I cannot write text on the mail page above the picture.

can not write text on top of picture when I use photo mail with PS12 after entering the email address

Why did you post this in a forum for Acrobat?

N95 Wont Send Email

My N95 wont allow me to send emails. When i do, i get the usual which access point would i like to use, then it asks me the usernam & password even tho they are already filled in, i accept and then it goes back to access point chooser, then back to password, and so on in a loop. What do i do?
The Details are correct, because i can recieve emails, just not send.
Nokia Addict: 5110, 6210, 8310, 3510, 3300, 3220, 5100, 6280, N80, N95

I also had this problem. Although my settings were correct i could recieve but not send email. To solve it I had to enter my mobile provider (O2) settings in the SMTP section, not my email provider settings.

My Macbook Pro(2010) only writes in capitol letters, can´t write numbers and only starts up in safe mode once a week!

Hey guys!
So my Macbook started acting weird a couple of months ago. All of a sudden i could only write in capitol letters and i couldnt write any numbers. Every time i tried to write a number, i would only get the symbols instead such as " "#¤%&/ " etc. I tried restarting it and the computer booted in safe mode and still had the same problem as before. I decided to read around some forums and someone suggested " zapping the PRAM" which i did and it fixed the problem for about 1-2 days and then it was back to the normal.
I decided to turn in my computer to an authorized Apple technician to take a look at it and after a few days i got a phonecall saying that he had run tests for 6 hours but couldnt figure out what was wrong with the computer, he just knew that something was wrong. When i got the computer back it was working perfectly but the weird thing is that every now and then the same thing would happen with the keyboard and the weirdest part is that it usually stopped working on fridays, once a week.. Anyways i have done all i can, now im turning to you guys for some much appriciated help.
Any suggestion on how to fix this problem of mine?

Actually it sometimes gets a little further, the display will dim and the pointer will appear and then whoop it will turn off. if i do a verbose start up, it will finish all the steps, the white screen will appear and dim and then it will turn off.

Text in capital letters only

Hi all
When I try to add text to a picture in my photoshop elements, then it only writes with capital letters.
I guess I might have pushed some botton somewhere, but I can't find it.
Anyone knows how to solve this?
And before you think my caps is locked.. then no ;-)
greetings from Sweden
Christina

As I have never used PSE, I am not sure if it has something like the Character Palette (probably similar, as the Options Bar above, seems similar), but in PS, there is a setting for All Caps in the Character Palette. That is where one could easily change things to Initial Caps, if that is what is desired.
What happens is that one Opens an image, where All Caps was used, and then does some editing of Text. A good, and common, example of this is with many DVD Menus. The All Caps is a "sticky," and if used for that first Image, will "hang around," when the next Image is Opened. Often, the user is totally unaware that this change has been made - until they start typing and they are not getting what they desire. A simple reset takes care of it.
Here's a look at PS CS2's Character Palette, w/ the All Caps icon active.
I'm surprised that the PSE forum sent you here, as Barb_O and the rest are usually very quick to help with PSE issues.
Good luck, and sorry that I cannot point you directly to a Character Palette in PSE, but I think that you have your answer above.
Hunt

I purchased Elements 13 and everything downloaded great. When I go to license the software before use the code wont accept letters, only numbers. My serial number has both.

I can't use the software before a license it. I am on the page to type in the serial number and it won't take letters only numbers. This is very frustrating.

Hi John,
It seems you have got a redemption code. Try to follow the link mentioned below.
Redemption Code Help
https://helpx.adobe.com/x-productkb/global/find-serial-number-student-teacher.html
https://helpx.adobe.com/x-productkb/global/find-serial-number.html
Thanks,
Atul Saini

I just got a macbook air for xmas- now i wont get texts on my iPhone. they go right to my laptop. how can i get the texts to go to BOTH devices?

My hubby just got me a macbook air for Xmas which is awesome. Set it up to be able to ichat on it as well as on my iphone. Only now i wont get texts on my iphone- ONLY on my laptop. How can i configure so that I can get texts on my computer AND my phone. NOT just one or the other? Please help!

Hi,
The Mac version will use your Apple ID as the first and only choice...
... Until you add the same Apple ID to Messages on the iPhone.
Once this is done it is best to Restart the app on the Mac.
This will then get at least one, possibly two pop up saying the iPhone in using the Apple ID and the iPhone Number.
Accepting these Pop ups will enable the iPhone as an ID to be used in the Receive At List.
It will also appear in the drop down at the bottom for "Start New Conversations from"
If you did not set iyt up like this then remove the apple ID from the iPhone in the Settings > Messages.
Place the iPhone in Airplane mode to break with the server.
Take it out of Airplane Mode and re-add the Apple ID in the Messages settings.
Then Restart the app on the Mac as above.
Having done this you can still turn Off the Apple ID on the iPhone (receive as the iPhone number only) or disable the iPhone Number on the Mac (receive Apple ID stuff only)
The Start New Conversations option on the Mac version means you could use the iPhone number so people don't get your email.
8:26 pm Thursday; December 26, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Is there a way to Auto-Correct Spelling of text as I write text in Dreamweaver CS6 ?

While I write text on the html pages using Dreamweaver CS6 (Adobe Cloud downloaded version 2014), there is only an option to Spell Check the page.
But I am asking if there is a way to set preferences to auto-correct suggestions such as how Word Docs offer solutions to mis-spelled words?

Thank you for your replies.
I am using Adobe, Creative Cloud / Dreamweaver Software Program iMac Downloads, updated to current.
I believe there not to be the feature present in Dreamweaver on "Page View" to Spell Correct Automatically by giving word options, etc.
I know to spell check the entire page before posting the page(s) live.
I am not only writing in code view, designing HTML 5 pages, but I am the Author and Editor of all content as well.
I can see how the coders would hate having text auto correct.
But, on the editor side, as a writer, from the page view, ... it would rock as an option.
:-) Sharon S.

I have an iPod Touch 4th Generation and it's acting weird. It looks to be something like a calibration error but i don't exactly know. It won't let me tap letters and symbols such as ' ; R and D'. Help?

So my iPod Touch forth gen is acting up. When i try to slide the button to unlock the lock screen, it slides back. It takes several tries for me to do that. I'm able to tap the numbers for the code, but when i try to send messages to my friends or write one of my fanfictions, it goes haywire. It'll enter in letters and words that i didn't even tap on. When i try to tap on a couple of things in particular, it ignores it. '; R D and ~' are some of the letters and symbols that I'm having issues with. Can someone please tell me what's going on? I've restarted it dozens of times, re-entered my passcode, deleted data, and even re-downloaded the keyboards a couple of times. Help!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Keyboard problem typing random letters and symbols

I'm having a keyboard problem, the g key, t key, and 5 key type random letters and symbols. i just spent $700 a few monoths ago to a genius [at getting my money] for a logic board after spillin somethin on it. didnt spill anyqthing time. shoot. is this goin to be another major expenditure? downloaded os x 9.4, hoping that might somehow cure it. yeah right

Hi Rob,
Welcome to Apple Support Communities.
It sounds like your running into an issue with the keyboard on your MacBook Pro. The article linked below provides suggestions that will resolve most keyboard issues like the one you described.
OS X Mavericks: If keys on your keyboard don’t work
http://support.apple.com/kb/PH13809
If other keys don’t work
You may have accidentally set an option that changes how your keyboard operates.
Choose Apple menu > System Preferences, click Dictation & Speech, then click “Text to Speech.” If “Speak selected text when the key is pressed” is selected, deselect it or click Change Key to select another key.
Choose Apple menu > System Preferences, click Accessibility, then click Keyboard. Make sure Slow Keys is turned off. If Slow Keys is on, you must hold down a key longer than usual before it’s recognized.
Choose Apple menu > System Preferences, click Accessibility, then click Mouse & Trackpad. Make sure Mouse Keys is off. If Mouse Keys is on, pressing keys in the numeric keypad moves the pointer instead of entering numbers.
Choose Apple menu > System Preferences, click Keyboard, then click Input Sources. Select “Show Input menu in menu bar.” Open the Input menu and make sure the correct keyboard layout is selected. To see the keyboard layout, click Keyboard, then choose “Show Keyboard & Character Viewers in menu bar.”
I hope this helps.
-Jason

Unable to write text in safari

Since the last update I've been noticing that many times when I'm typing on a web page (pages that I've visited for years) safari, atomic, and chrome browsers will stop allowing me to edit or create text within boxes made to type out text. I've tried clearing all the browsers caches, etc. I've tried to see if its isolated to only one program and its not. Initially I can type, but if I navigate from the page in another tab, touch outside the text box on accident, or enter a couple paragraphs the ability to write text stops. This is not in text boxes that have a limited number of characters either. I order to say, edit a profile on a dating site or Facebook I have to open notes, type out my blurb of text, and then paste it into the text box. The only thing it will allow me to do is delete text within the box or paste in text (and i cant even do this sometimes.) the problem is getting progressively worse. It almost feels like a virus would on a windows computer.

I restored it from backup. I have lots of docs in pages and stuff I can't lose. I don't have the integration that macs have since I have the windows computer. I did everything the people on the AppleCare said to do. They can't figure it out either. I thought I'd see if anyone else is having or have had the same issue.

PDF forms have problems displaying text and only appears when the field is selected

Hello,
I created some pdf forms to distribute to the company clients. But we are having some people complaining about the text visibility. When they have work in team, the pdf that they receive from a third person often appears unfill or without text, the text is only visible when the field is selected. I need to find a solution for this because our company products are base on this forms.
If there is any addition information that I should add to understand what is happening and how to fix it, I'll be happy to write it.
In the company, we all have mac and the forms where created innitially in Adobe acrobat 9 pro, but we have now Adobe acropabt XI pro.
The users have both Mac and Windows systems.
Thank you,

This is usually caused by the form being filled-in and saved by a Mac user who is using the Preview application to view the PDF. More information is here: http://kb2.adobe.com/community/publishing/885/cpsid_88564.html
It is a good idea to inform your users that Adobe Reader (or Acrobat) should be used to work with the forms.

Keyboard typing weird letters and symbols

Hi all
I have tried to use my Macbook Pro this morning and when I type its typing the wrong letters
and symbols...................can anyone help?
Thanks
Jo

I just spent hour trying to fix tihs on my iMac and could find the answer so I wanted to post it for someone else. Mine was typing in crazy symbols (åß∂ƒ©).
Also I could not Command + Tab (shoot me), and when I clicked on a window in another app it hid the windows I was working in.
I tried new keyboards. And the system preferences stuff - system preferences - language & text - input sources. then select US. This didn't fix it.
Then I tried to change the keyboard shortcuts in the same window - spotlight (on left), unclick the show spotlight search field and the other one bellow. Then hit the com + Spacebar. This didn't fix it.
Then i did it and double check that i did it right and still didn't fix it.
So I called apple support and they gave me the magical key to fix this.
Turn off your computer. Unplug for 30 sec, and everything attached. Then power it back on and hurry and hold Command + Option + P + R. I held Command + Option + P with one hand and then after I hit power I added the R.
The computer will make one chime. Keep holding it. I will then shut down and make one more chime and you can let go.
Taa daa!!
I have a 27" iMac 2.93Ghz i7 with 10.8.2 (FYI).

N95 wont write text in letters only symbols when u...

Similar Messages

Maybe you are looking for