N95restore didn't work with calendar??? any ideas?
Hi
just updated to the latest 12.0.014 firmware.... was very careful to back up my phone to the memory card before I did this, update went fine... have just restored the back up and everything's ok except the calendar details! all to-do's and other calendar entry's are gone
when i went into calendar a little message popped up to say something about the time has been changed, continue? something like that, so i ok'd to continue and went in and it was all blank.
does anybody have any ideas on how I can restore the calendar stuff... I know it's been asked before but i couldn't find a thread with a useful response!!!
Thanks in advance.
x
I also have this problem but I'm on the .13 firmware. I also noted that the calendar entries will not be saved using the PC Suite.
Been a phone user since the Ericsson 318
Similar Messages
-
iTunes recognizes my device but the device does not show up for me to work with. Any idea where I go to access to device in iTunes. Going to File/Device is greyed out.
I think this article will help you.
-
Veetle is no longer working with firefox, any idea why, or how to fix it??
As of two days ago, Veetle channels no longer appear using Firefox browser v. 8, yet seem to work perfectly fine with Google Chrome. Although similar issues have been raised in previous questions they (1) deal with earlier versions of FF, or (2) I have already attempted the posted remedies to no avail. Any idea what is causing the problem, and how to fix it? Furthermore, in your "educated guesses" below, you don't show the plugins I have for Veetle, although I do have them.
Right-click on any blank space on the Veetle page. A dialog box will appear, at the bottom will be listed "View page Info." Clicking on "View page Info" brings up a Firefox dialog box with the following tabs: General, Media, Permissions, and Security. Under the Permissions tab there are six functions listed that may be "allowed," or "blocked." Inspect the function for "Set Cookies." If this setting is checked "block," channels will not be displayed in Veetle. In order to recover the channels, "Set Cookies" must be checked for either "allow," or "allow for session."
-
I recently updated Flash PLayer to version 11.7.700.169 on my imac OSX 10.6.8 with Safari 5.1.8 browser and no longer get hulu to work. Scrren is black but audio is playing. You Tube continues to work fine.
Any ideas?JavaScript and Cookies are enabled. my cookies list shows at least 3 associated with hulu. Funny thing is, if I grab the up/down control bar on right side of screen with my mouse, then hulu plays in a somewhat chopped frame by frame. As soon as I let go, the frame freezes yet audio portion continues.
I don't know what a munged Hulu cookie is, however. -
Hi i been try to minimise few app like safari,Ical etc etc from the fullscreen view but didn't manage to find any solution!! With the command M shortcuts didn't work...any help???
To make a screen full screen, you click on the arrows in the upper right corner. To minimize, move your cursor all the way to the upper right corner of your desktop--give it a second--a symbol will appear that lets you "reverse" the action and minimize the window. Hope I'm explaining this correctly.
-
Ipod video classic 5th gen won't play video/podcasts or audio only a black screen with the play symbol and volume/progress bar. games work fine! any ideas?
Here's some more info.
I tried installing the latest iTunes to my housemate's PC, logging into iTMS with my account, authorizing his machine to play my content, restoring my iPod to the factory settings, downloading the videos and copying them to my iPod.
It worked fine, and I can play my videos.
I have done the exact SAME thing on my own home PC twice, after completely uninstalling and reinstalling iTunes, QuickTime, and the Apple Software Updater. But I still can't get any videos downloaded on my home PC to play on my iPods.
Any thoughts? -
just bought ipad mini. As part of set up apple sent email with link 'Verify Now'. I've clicked it repeatedly but not responding. My email account is working fine. Any ideas?
Why not just create an Apple ID for her and then you wont have any problems. Login on iMessage and Facetime using her ID and do the rest with your ID. It will work i tried it on my iPad
-
TS3274 my ipad calendar has stopped syncing with my outlook calendar - any ideas how to fix?
my ipad calendar has stopped syncing with my outlook calendar - any ideas on why, and how to fix?
Hi SwimmingMummy,
I have a couple of articles here for you that will help you troubleshoot these issues with Reminders and Calendar:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/TS3999
iCloud: Troubleshooting iCloud Reminders and Tasks
http://support.apple.com/kb/TS4000
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
My wifi goes down at least once a day and I have to unplug the time capsule and reboot it and then it works fine. Any idea why this is happening/what I can do to fix it?
I was having this problem while still using Mavericks -- it started after a Mavericks update last spring. During the initial Yosemite beta runs over the summer, it seemed to be fixed, but after the official launch in October, I had all sorts of problems keeping connected. Its gotten a little better, but still happens to at least one of my devices every day. Weird that we still cannot figure out why the connection keeps dropping on some devices, but not others, and then the next day, one of the devices that didn't disconnect the previous day will disconnect, but the ones that did disconnect, stay connected. It's just sloppy, poorly written software for technology that isn't working the way it should. If you turn off Continuity and Handoff on all your devices, you will probably see that everything stays connected. With those turned off on all devices, TC stayed connected to everything for over a month. The day I turned Continuity back on, all the problems started again. It had something to do with the bluetooth version being used, the wifi routine, and Apple's AirPlay technology not quite getting along with each other.
-
After Mountain Lion download, FaceTime is not working anymore. Any ideas?
After Mountain Lion download, FaceTime is not working anymore. Any ideas?
I have reinstalled mountain Lion again . This time, Facetime works when somebody calls me, and I can do calls from my Mac again. But the problem was still that I was not able to call my iPad, what I was able to do with Lion (I had one Apple-ID and two call adresses). The solution was this time to generate a second Apple-ID from the Facetime in my Mac (this doesn't affect your main Apple-ID, it's only used for Facetime). Now, it works! ;-)
-
Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I can't get adobe bridge to open on my iMac... CS6 works perfect. Any ideas of what I need to do?
Thanks JudyThe lack of security updates requires me to update any old OS. Unless you never connect to anything on the Internet with the computer OR you never have anything to protect on your computer running such a computer leaves you open to theft, fraud, etc. The major problem with Mavericks and soon with OS X.X is unfamiliarity. Sure they have features we don’t like. But I bet so did the one you are running, when you upgraded to it.
Having said that I really got miffed when I was required to update my TV to work with digital signals. I have no trouble telling people to upgrade their computer, but ask me to upgrade my TV those were fighting words. -
I have wi-fi in my home and it has always worked fine with my iPad. Then I went to Ireland and used the iPad there. Since I have been home, it won't work in my house. I can't get my wi-fi connecton. I took it to anothe location where I have logged in in the past, and it worked perfectly. Any ideas as to why I can't get a connection at home?
Thank you.Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I have upgraded to 5.3 and I am still getting this message. I have logged into iCloud to see if there was a new Terms of Service agreement and didn't see anything. Any ideas?
Same here. The login works, but the Stream - according to the ATV - says there are "0" photos. Which is bogus.
-
this Built-in didn't work with me ....... why?
show_view
and
hide_view
is suppose to add anything for them until they work?Check the 'raise on entry' property of your canvases, and 'hide on exit' property of the windows they're in. If your current item is on a canvas with Raise on Entry = Yes, for instance, trying to show another view on top of it without navigating to an item on that canvas won't have any effect.
Maybe you are looking for
-
following is the table creation script with partition CREATE TABLE customer_entity_temp ( BRANCH_ID NUMBER (4), ACTIVE_FROM_YEAR VARCHAR2 (4), ACTIVE_FROM_MONTH VARCHAR2 (3), partition by range (ACTIVE_FROM_YEAR,ACTIVE_FROM_MONTH) (partition yr7_1999
-
I have several playlists. I can place songs on any of the playlists and move them up or down so they are in a set order. I was trying to move one particluar playlist to my IPod Shuffle. In the process of doing so, the songs on this playlist converted
-
Import photos from CD to iPhoto Album directly
Hi, I am a new Mac user and happy to join the Apple community. I have photos that are already organized into folders/subfolders and are stored in CD. Now what I would like to do is to directly import the photos to iPhoto Albums and keep the folder st
-
BAPI_MATERIAL_MAINTAINDATA_RT - no way to set MAIN EAN?
Hi, I'm using BAPI_MATERIAL_MAINTAINDATA_RT to create new materials. Everything was going fine until I added an EAN to the material, when it started giving the following error: M3-535: First specify the main EAN for the unit PC What this error says m
-
What is and how do I find xml index files
I keep getting a box that says something about unable to open files because xml files are missing!!!!! what does this mean and how do I cure it?