N96 and E-bay

Hi anyone had probs getting on e-bay?
I can access all other sites like FT, facebook, BBC etc etc but when I try to go to e-bay the phone goes into a spasm, like its trying to connect but can't. Any ideas?
It fine if I then go to bookmarks or another option. But just can;t get ont he bay.
Thanks

Ebay UK won't work for me when using a mobile data connection but it will work when using WLAN. I believe it's an issue with ebay UK's site not the phone as my N82 won't work with it at the moment either (it did work several weeks ago).
As an alternative the ebay mobile site is working ok at the moment.
Visit www.ebay.co.uk/mobile from the phones browser.

Similar Messages

How can I tell if fan between front and rear bay is working?

hi all
How can I tell if fan between front and rear bays is working? I put my hand behind G4 MDD to feel for air flow and it seems minimal. I hear a wind tunnel sound but I feel more heat than air flow. Please help as I don't want my Mac to overheat
Thanks, Web dude

You can run your mac with the side "door" open - down flat to the right of the computer. You should be able to see the fan do (or not do) its thing.
I have done this (run the mac with the side open) many times. For safety, I turn the mac off before opening / closing the door.

Lumia 1520 Sim and MicroSD bay

Hello,
My Yellow 1520's sim and microSD bays are wobley and not secure. Is this common where they kind of wiggle around when you touch them when they are fully installed? I'm not sure if this is a common issue or if it is only unique to mine. If it is unique, can I perhaps get a replacement sim/sd door? Thanks!

don't believe it is, so if you are concerned about the build quality of the particular handset you received, take it back to your point of purchase. if they are being less than helpful, take your phone to Nokia Care for inspection.

N96 and Mac OS X 10.4.11

Hi
Just taken delivery of my shiny new N96 and seem to have hit a rather large obstacle already...
I attach it via USB to my Mac Mini in order to transfer media onto the drive (in Mass Storage mode) and the problem is that the transfer procedure either locks up completely (it will transfer some of the file and stop) OR it locks up and eventually completes but takes a long time to do so (thirty minutes for a 120MB folder of music) .
Tried http://europe.nokia.com/A4423135 but the software does not recognise the 'phone so cannot sync.
Any suggestions as to what to try appreciated.
Mike

Hey,
Firstly download the NMT 1.3 for tiger www.nokia.com/mac. After the icon comes up in the menu bar, connect the device and then select PC suite mode on the device. Now go to tools & settings -Check for updates now- This will download the N96 device profile to your mac.
All the best.
Cheers
Sandy
Message Edited by sandy2410 on 28-Jan-2009 10:14 AM
Helpful information, then dont forget to hit the kudos star :-) Or say it accepted solution and thanks

CANNOT BROWSE INTERNET WHILE DOWNLOADING FROM BIT COMET AND PIRATE BAY, WEBPAGES DO NOT LOAD, IT SAYS CANNOT FIND SERVER

My desktop crashed and I had to get a new hard drive and motherboard. I got a new os too, it's win 7 pro. Now when I try to download media from bit comet from any of the torrents on the site I cannot browse the internet. What happens is a page comes up and says "cannot connect to server" and other pages to that affect, but when I stop a download I can browse normally. Why?

Nothing to do with your question, but websites like Bit Comet and Pirate Bay are illegal. Any websites in which you can download paid content for free violates the international piracy laws and you may face a legal penalty for using them.
In response to your question; many of these torrent websites are loaded with viruses. One of these infections may be preventing you from browsing while downloading.

Nokia N96 and Rover Rover Car-Kit

Hi and Help!
I hope someone can throw some light on a problem I'm having with my Nokia 96 (on 02), which I upgraded from an N95 8Gb at the beginning of December 2008. I have had numerous Nokia Phones (and a Blackberry) all on 02 and all working well with the built in car-kit in my Range Rover Sport. The two are connected via Buluetooth, but I am experiencing the following problems:
Everytime I get in the Car with the phone, it asks if I want to connect and asks me to input the code which I do and it connects. It is listed as authorised but I still have to go through this procedure each time.
When I'm on a call, the quality is good, but after a couple of minutes, I can hear the person on the other end, but the speech is very clipped, and they cannot hear me and as long as we both persevere, the call continues and returns to normal after 20-30 seconds but this issue is repeated every few minutes for the duration of the call. This happens whether I make or recieve calls.
Some of the things I have tried but which have not worked:
02 have replaced the phone and I'm now on my second, brand new unit.
I upgraded the software on both and I'm currently running 12.043, 26/11/08
I have had Land Rover look at the car kit when it was serviced yesterday (26/01/2009). They confimed they had tried it with other Nokia phones and it was working correctly and could not replicate the fault, albeit they weren't using an N96
I have independently checked the Land Rover webpages and confimred that the N96 is compatible
Partial and full reboots.
Deleting and setting up new Bluetooth connections
Changing the Network from Dual to GSM only
Trawling through N96 and Land Rover forum looking for some sort of clue, and I can find absolutely nothing anywhere else!
I hope someone can help as I'm finding this increasingly frustrating and it's knocking my faith in Nokia products, and I'm considering returning to my N95.
Many thanks

Hi,
Have got almost the same problem as you detailed below, however call quality when connected is fine. Even have the same car. Got a brand new N96 after two weeks but it is exactly the same, keeps requesting the pairing and code instead of connecting automatically.
If I cannot get this sorted I will swap for another cheaper phone that will work. Basic Nokias do the trick. Like Nokia have never used anything else.
I hope someone can throw some light on a problem I'm having with my Nokia 96 (on 02), which I upgraded from an N95 8Gb at the beginning of December 2008. I have had numerous Nokia Phones (and a Blackberry) all on 02 and all working well with the built in car-kit in my Range Rover Sport. The two are connected via Bluetooth, but I am experiencing the following problems:
Everytime I get in the Car with the phone, it asks if I want to connect and asks me to input the code which I do and it connects. It is listed as authorised but I still have to go through this procedure each time
Any help would be appreciated but I am guessing that there isn't any,
Thanks
VoteforPedro

RADIUS and Nortel (Bay Networks)

I have install BMAS 3.8 and the RADIUS server worrks fine with NTRadPing. I am tryig to use the RADIUS server to authenicate users to a Nortel (Bay Networks) 450. I have put a sniffer on the line and find the RADIUS server is sending an Access-Accept message, but the 450 shows access denied. The only thing I can figure is the 450 does not like the authenicator. I have tried just about all the options under Bay Networks in the RADIUS Profile, with no luck.
Has anyone got Nortel switches to authenicate thru a Novell RADIUS server/
John Curran

John,
I am interested in knowing if you found a solution to your problem? We
are currently planning on setting up Radius and we use Nortel devices. Any
information or tips you could provide would be appreciated. Thanks,
Lee Anne
> Your Nortel box is probably expecting an attribute in the access-accept
> packet that is not there. You probably just need to configure this
attribute
> in your RADIUS Dial Access Profile, although it's possible that you need
an
> attribute that is not yet in our dictionary.
>
> I suggest that you check your Nortel documentation to see what
attributes it
> expects from the RADIUS server. If you require an attribute that is not
in
> our dictionary, post the details here and I'll see that it gets added.
>
> >>> John Curran<[email protected]> 12/23/2004 10:59 AM >>>
> I have install BMAS 3.8 and the RADIUS server worrks fine with
NTRadPing. I
> am tryig to use the RADIUS server to authenicate users to a Nortel (Bay
> Networks) 450. I have put a sniffer on the line and find the RADIUS
server
> is sending an Access-Accept message, but the 450 shows access denied.
The
> only thing I can figure is the 450 does not like the authenicator. I
have
> tried just about all the options under Bay Networks in the RADIUS
Profile,
> with no luck.
>
> Has anyone got Nortel switches to authenicate thru a Novell RADIUS
server/
>
> John Curran
>
>
>

Puzzled by N96 and N81

Here's why i'm puzzled.
N95/N82 and others carry the omap 3d cpu... (I thought for n-gage ??)
N96 does not support N-Gage, because "lack of 3D chip"
N81 supports N-Gage, however it too has a "lack of 3D chip"
Now if you go to
http://www.glbenchmark.com/result.jsp
You'll see that the N81 is actually slower than the Nokia 6110, because it has no 3D chip.
See where i'm going?
Compare the N95 to the N81 on the game, Global Racer, you'll see how the N81 does what the Nokia 6110 does, about 3 frames per second if that.....
So the million dollar question, if the N81 supports N-Gage games then so should every single Nokia phone which does not have the omap CPU... the 6110 is faster, faster cpu, no 3D chip, yet i don't see N-Gage mentioned anywhere...
What's going on? How can a phone without a 3D chip which is found in the N82/N95 etc play n-gage games?....

To the best of my knowledge (and that's saying something), the N96 DOES support Ngage.
I don't know where you got that information. Like it was said 3D acceleration doesn't automatically prevent Ngage compatibility.
According to Nokia's little chart, it will not be supporting n-gage, but the point was not that it *can't* support, it obviously can along with every other symbian 60 nokia phone Nokia's released over the past couple of years, just that they're deciding not too...
http://www.nokia-tuning.net/index.php?s=processor
What interests me is that if the next gen phones of the N Series no longer use the omap cpu from texas instruments then the 3D acceleration will just be a relic from the past... obviously, the STn8815 Nomadik cpu (ARM926 332 MHz)
is going to be pretty powerful as it can support all that video functionality in real time to record tv shows and play them back, i'm betting it can pull off some nice calculations for games..... but that's another story.
http://www.st.com/stonline/products/families/mobile/processors/stn8815.htm
info on the N96 processor above.
The TI OMAP 2420 range processors can handle the 3D processing as you can see the n-gage phone itself where all this gaming began uses a 32-bit RISC CPU ARM-9 104 MHz which also happens to be in all of the "cheaper" models which is why every single phone should be capable of using n-gage and playing n-gage games..
just that nokia chooooooooses not to for the N96.
http://www.planetn96.com/images/n96vn95.jpg
As indicated on the chart from nokia (just the image is externally linked) that might be a no no, if it is, sorry i'll not post an image externally linked again, but the screenshot is directly from the nokia site which i can't seem to find...
it clearly states that N96 will not be support n-96, although quite clearly it could easily be added.

Original Airport cards and e-Bay

I have a 17inch flat panel iMac, 800 mhz speed and am thinking of going wireless. I know I need an original airport card for my computer, NOT the airport extreme. I have been searching on e-Bay and found various sellers with a huge difference in prices. My question is: are there different models of the original airport card? One vendor lists an airport card model # M7600LL/A for a high price, but in the information it lists my computer as one of the models this card will work with. Another vendor has an airport card model # M7600LL/E for a much lower price but the information on the card's compatability is rather sparse. Are they the same card just with a different price? What is your advice about buying an airport card from e-Bay in general? I will also need a wireless router and have my eye on a Linksys model that a few of my friends have in their wireless networks and they recommend it highly. Any thoughts on that area?
17 inch Flat panel iMac, 800mhz Mac OS X (10.3.9)

Basically the difference between the two is one was for American market I believe and the other the European market.
Both should work fine.
Original Airport Card Alternatives
http://www.ifelix.co.uk/tech/1030.html
A Mac with an original Airport card can connect to any wifi certified 802.11b wireless network (or 802.11g in backward compatible mode).
Out of all the different wireless routers I have used, I have found my Airports to be reliable and easy to setup.

N96 and video capture

is there a particular piece of hardware and software people use to capture video from the TV out cable for the N96.
I've tried into an ATI TV card and a gamebridge and the picture is NOT good at all. Doesn't even show up on the gamebridge.
NEED HELP URGENTLY

Nope I've used it all the time.
Just check that you are using the correct settings int he phone (PAL, NTSC, etc.) and match your card.
Some things to keep in mind:
TV out output is VGA but the actual resolution is QVGA as the TV out cable just clones the phone screen. There are two exceptions: PHOTOS and VIDEO. When viewing pictures and watching video this is output at VGA resolution.
I use a Xoltrix tv tuner card.
640K Should be enough for everybody
El_Loco Nokia Video Blog

T420s SSD and Ultra Bay Caddy

Does 9.3mm and 7mm SATA 3 SSD can fit into 9.5mm Ultra Bay Caddy for T420s..??
i am planning to buy an SSD.
My requirements : 80GB space, SATA III 6Gb/s (Sq.Read : >500MB/s & Sq.Write : >450MB/s)
it would be better if it is a 7mm thick..
So any better choices we had in SSD for T420s..??
T420s 4170-CTO : i5 2520M, 6GB RAM, 320GB HDD(7200rpm).
Z60t 2513-MCU.

I don't know about India but if Hong Kong is OK I've had excellent resuts with eBay seller, parts-wholeseller, (http://myworld.ebay.ca/parts-wholeseller/) who sells Ultrabay Adapters for ~$10, shipping included.
Cheers... Dorian Hausman
X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

WMV, N96 and N95-8GB

The new N96 will support wmv/wma. Is that hardware-related, or could future firmware updates to the N95/8GB enable those handsets to play these formats too? And if it's firmware-related, would Nokia make it possible on other handsets?
When the N95-8GB was first released it couldn't play Youtube videos, but the recent update made it possible. I hope the same for windows media too.
Message Edited by mrsmith on 18-Feb-2008 04:28 AM

There may be some royalties issues, so Nokia may not be allowed to provide it to devices already in the consumer's hands, let's not forget who owns the rights to those codecs...
640K Should be enough for everybody
El_Loco Nokia Video Blog

For everybody with a N96 and stuck at firmware ver...

Hello everybody
As some n96 users know the phone had lots of bugs and was working very slow. I went to a Nokia Care Point because I wanted everything fixed. I couldn't update to version 12 via my cellphone, but at the care point they had a dongle and they could install the new firmware.
So if your phone has version 11 with the bugs and you want to have new firmware but can't do it via the phone: go to a care point!
Version 12 is very stable, overall performance is increased, and nowadays, I just have to do a total reboot only a few times a day instead of a few times an hour ;-)
I really hope Nokia will not release the n97 without checking every bug first!!!

Gdgmacguy : my friend , i tried all basics soft reset, hard reset on my iphone 4s..the phone is not booting at all its stuck red battery screen..even itunes is not recognising the device...
My other concern is, i started to use my spare iphone 3gs after my 4s gt dead..but 3gs is also showing same symptoms..randomn switch off and will boot only once conected to charger with plenty of charge..i tried to restore, reset on this device..im afraid it might crash as welll...so need a solution..

Noki N96 and ANY car Kit

I have a N96 with Software version 30.033.098.1. When I try and dial from my Car Kit (Bury CC9060) the N96 says "Connection Error" and then "not allowed". It did this on the previous CK-15W, which I thought was faulty which is why I upgraded to a Bury. On my wifes CK-7W if I try last number redial by double clicking the Nokia button then I get the same. Dialling from the handsets works fine on all the car kits. I've toggles Remote SIm and it makes no difference.
Anyone got any thoughts on this.
CHeers
Andy
Solved!
Go to Solution.

Trust me...this won't be a Pioneer problem, it'll be a Nokia problem. See Nokia have been completely complacent with the fact that their phones are nice & shiny and they have a really good user interface. Their problem is they always release their software before it's ready and then let us (the punters) test it for them.
Well...MR Olli-Pekka Kallasvuo...I have finally got around my Nokia problem....I've finally binned my Nokia and gone for an iPhone 3GS.....and have not looked back yet. I was really worried about not having a physical keypad however Apple have done it well.....It pairs and works well with my Bury car kit......
Interestingly Nokia never replied to my first post...wonder if they'll reply to this..or delete it.
Another advantage is that I don't need the memory hungry, buggy Nokia PC Suite anymore.
Long live the iPhone! I am a happy EX-Nokia customer!

X-Fi Fatality and Front Bay Digital

Right . . Just got my card today and kind of impressed so far. Have come over from an M-Audio Revolution 7. which is a software based card but still fantastic for music and a doddle to set up for digital out. I use a coaxial cable linked to a Denon 3805 amp. Now on this card, using a coaxial cable from the front bay, what speaker configuration should I use because so far I just cannot get music to sound as pure as on the M-Audio and it seems to have something to do with the bass and the Subwoofer, it just doesn't sound quite right. I have run through my amp settings, tried Music Cd's from a standalone CD player etc and the sound is fine.
Games seem to be ok. Maybe a hint of more detail with this card.
As I am using an external amp I have switched off all the DSP extras the X-Fi can do so the source is as pure as possible.
Hope someone else has this kind of setup and can shed some light.
Thanks in advance
Message Edited by comfysox on 09-25-2005 08:34 AM

Yes, that's the card I have.
And I don't get an option for DDL License Activation in my start menu, but I do have the DDL pack installed and I didn't need to activate it.
The reason that I asked about a decoding tab is that I've seen screenshots of other X-Fi control panel?tabs and they had a decoding tab.
Also, Creative support says in my earlier link?I should have a DDL icon in Entertainment Mode, which I don't have?
Thanks for the reply, I appreaciate it.

N96 and E-bay

Similar Messages

Maybe you are looking for