N96 firmware 20.050 - Photo Menu Blank
I've just updated to the latest firmware and now my photo menu is completely blank and I can't access any photos.
They are all still there, I just can't view them at all - when I select one it just says "Processing...."
I've tried a soft and hard reset but neither fixed the problem.
Has anyone else had this problem and managed to fix it?
Solved!
Go to Solution.
The 3 finger reset is the hard reset. I thought you have already tried that. If you haven't I suppose it is another thing to try. Don't forget to backup first. Also try removing the memory card.
Message Edited by cjlim on 21-May-2009 10:51 PM
Similar Messages
-
Like the N96 alot now ive had it a few days and it has speeded up
Its still a little slow in the 'Photos Menu' when viewing 'all' as it shows all the videos aswell. Is there a way to make it show photos only and leave the videos to the 'Video centre' menu? As im sure this would speed it up quite a bit.
Thanks baggy69.There are several ways, but each one has drawbacks.
One way would be to add Tags to the pictures or videos. That way you can navigate by TAGS instead of using the ALL option of photos.
Also you could Hide the videos by setting the Hidden Property to them. But then they won't show up in Video Center either.
You can create albums and then use these Albums to navigate instead of the ALL.
I'm sure there are many other ways to work around this as well.
640K Should be enough for everybody
El_Loco Nokia Video Blog -
Since updating to FireFox 29. there are a lot of FaceBook Friend's posted photos are blank now. How do I make them show?
If images are missing then check that you do not block images from some domains.
*Tap the Alt key or press F10 to show the Menu bar.
Check the permissions for the domain in the currently selected tab in "Tools > Page Info > Permissions"
Check "Tools > Page Info > Media" for blocked images
*Select the first image link and use the cursor Down key to scroll through the list.
*If an image in the list is grayed and "<i>Block Images from...</i>" has a checkmark then remove this checkmark to unblock images from this domain.
Make sure that you do not block (third-party) images, the <b>permissions.default.image</b> pref on the <b>about:config</b> page should be 1.
Make sure that you haven't enabled a High Contrast theme in the Windows/Mac Accessibility settings.
Make sure that you allow pages to choose their own colors.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
Note that these settings affect background images.
See also:
*http://kb.mozillazine.org/Website_colors_are_wrong
There are extensions like Adblock Plus (Firefox/Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images and other content.
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*http://kb.mozillazine.org/Websites_look_wrong -
Iphoto 08 photos all blank with Exclamation mark
Hey everyone... so I've been using Iphoto for years had a bunch of photos on there and then wanted to import old photos which I had in my picture file in finder, into iphoto so I could organize them better and view them easier... so I imported them and then all of a sudden all of the pictures in iphoto became blank even those from before and even pictures in the trash and recovered photos all blank when I go to open any of them there is an exclamation mark.
The files names and album names are all there all same as before no actual pictures.. so I went to help and it said that this was a common problem in iphoto 5 and to upgrade and restart iphoto i did this but nothing happen..
anyone who can help?Welcome to the Apple Discussions. The ! is an indication that the library has broken the file path to the original files. First make a backup copy of the library and run the three fixes below in order as needed:
1 - launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select all options.
2 - rebuild the library using iPhoto Library Manager as follows:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 -Download iPhoto Library Manager and launch.
2 -Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: It may take some time to create the new library if you have a lot of photos.
3 - start over with a new library and import the Originals folder from your original library as follows:
Creating a new library while preserving the Events from the original library.
1. Move the existing library folder to the desktop.
2. Open the library package like this.
3. Launch iPhoto and, when asked, select the option to create a new library.
4. Drag the Originals folder from the iPhoto Library on the desktop into the open iPhoto window.
This will create a new library with the same Events as the original library if you have the Finder checkbox unchecked in the Events preference pane.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard. -
I have a Photo menu page and when ever I click on a picture it takes me to a folder album how do I turn that off since it is kind of annyoning.
Use the "Blank" page template - not the "Photo" template to place your thumbnails and PayPal buttons.
Place the individual enlarged images on separate new pages and link to them from the appropriate thumbnail. Paste the button onto this page too.
Make a link back to the main page on each individual page so that you don't have to include all these "extra" pages in the navigation. -
Photos menu dissapears from Apple TV
Photos menu dissapears from Apple TV as soon as I upload my library from my computer (the one that is synching with ATV) If I go to sources and I select ATV instead of my library the photos menu is back. In either case the photos are there as I can see them in the screen saver.
Everything was working well (including photos) for several weeks until today.
I have reset the ATV, reset my iTunes with no luck.
What should I do? Please help.
ThanksHi,
The photos menu is only available when you select the ATV as your source. and not when you select a streamed library.
This is because photos can only be synced and not streamed to the ATV.
Therefore, there is no Photo menu in a streamed source library.
See the fourth box on Photo syncing here - http://docs.info.apple.com/article.html?artnum=305270
Regards -
Help needed in creating easy flash photo menu
First hello to all of you And greetings from Poland
Could somebody help me or give me a guide, maybe a tutorial how to create an easy flash photo menu in AS3 or 2. Let me explain what I want to do this is my image menu done i PSD is my image menu done i PSD:
This menu should be with "clickable" URL images, in the left and right where the red circles are I want to add arrows to change to new images - a whole page with new 9 images - I wanted to ad a nice "change" effect. Also I want to add a "close up" image when onmouseover - something like in this gallery when you move your mouse on the images http://www.flashmo.com/preview/flashmo_129_circle
Is this possible and somebody could give me a hand? Tutorial would be nice because I would like to learn something new, but if you have AS which could fit my demands also would be nice For help I could only be grateful and give you a virtual beeruse google to search for: flash photogallery tutorial.
-
from some reason (i'm not sure why..) my whole iphoto library got deleted. I restored the whole library from my backup. Now all the photos are blank but steel have the photo info. (date, res., size etc.) Do you know what's the prob.? why can't i see my pics.
It's says that file does not exist. How come? And why does it still show the image info.?
Where can i find those files (i have a daily backup)
The original image files are missing form your iPhoto library or iPhoto cannot find them, because the link to the originals has been broken. The image info is stored in the internal libraries, independent of the original files. That is, why you are still seeing them.
I restored the whole library from my backup.
Try restoring from an older backup, from before you first noticed the problem.
How large is the library, that you restored? Is the file size large enough to hold all your photos, or has the size been reduced? If the library is still large, the photos may still be inside, even if iPhoto cannot find them.
It's says that file does not exist. How come?
What happened, before your iPhoto library got deleted? Which applications have you been running, or which new software have installed or upgraded? Have you moved the library to a different disk or tried to use it from different user account or access it over the network? -
Suddenly all my albums in Photos are blank. The photos are still in the camera roll but not in the albums. What happened and how do I recover them all? Are they in my icloud? Also the photos are clear as thumprints but when I touch it to zoom are blurry. what gives? They were all completely clear and in the albums when I last used my ipad?? Would doing the "Reset" under General settings do that? When I returned from Europe I reset my ipad to get it in the right time zone etc.
Reboot. Press and hold the home and sleep buttons until the apple logo appears. Ignore the red slider.
-
Flash cs3: how to make moving/scrolling photo menu left and right?
http://media.moma.org/subsites/2008/miro/flashsite/index.html
- click continue, then relative size link
How can I do this with lash cs3: how to make moving/scrolling
photo menu left and right?
When you move left and right and paintings move. and when you
click on a painting, you see the the title and it links to another
page on the site.scene_mc start at x = -550... x wide is 2164 px
now I have this and its working...
navL_mc.addEventListener(MouseEvent.MOUSE_OVER, navL_Over);
navL_mc.addEventListener(MouseEvent.MOUSE_OUT, navL_Out);
function navL_Over(e:MouseEvent){
if(scena_mc.x == 0){
scena_mc.x == 0;
else if(scena_mc.x <= -10){
scena_mc.x += 10;
navL_mc.addEventListener(Event.ENTER_FRAME, runL);
function runL(e:Event):void{
if(scena_mc.x == 0){
scena_mc.x == 0;
else if(scena_mc.x <= -10){
scena_mc.x += 10;
function navL_Out(e:MouseEvent){
navL_mc.removeEventListener(Event.ENTER_FRAME, runL);
navR_mc.addEventListener(MouseEvent.MOUSE_OVER, navR_Over);
navR_mc.addEventListener(MouseEvent.MOUSE_OUT, navR_Out);
function navR_Over(e:MouseEvent){
if(scena_mc.x == -1164){
scena_mc.x == -1164;
else if(scena_mc.x >= -1154){
scena_mc.x -= 10;
navR_mc.addEventListener(Event.ENTER_FRAME, runR);
function runR(e:Event):void{
if(scena_mc.x == -1164){
scena_mc.x == -1164;
else if(scena_mc.x >= -1154){
scena_mc.x -= 10;
function navR_Out(e:MouseEvent){
navR_mc.removeEventListener(Event.ENTER_FRAME, runR); -
N96 - Firmware 30.0.33 Changelog? Anyone?
Where can I find the N96 firmware 30.0.33 changelog?
changelogs contain the changes made from previous firmware versions to the new firmware version updates. however, these are considered confidential information by Nokia and are not released into the public domain. your best bet is to read up on users subjective experiences by Googling for the firmware changes/improvements/bug fixes etc.
please throw some kudos our way, it would mean a lot to us
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post! -
Arrange Menu Blanked Out for New Items - Adobe Edge
Why is the Arrange Menu blanked out, it's very VERY frustrating when I want to simply adjust the layer of some text I created in Edge as it was thrown to the bottom layer which isn't very handy when I am trying to add it in as new content on the TOP layer.
what is the point to having an Arrange menu if it doesn't even work?
Is there a setting that I can change to enable layer alterations or am I missing something here?
EDIT
As a bit of extra information, I read that you need to edit the layer of items using CSS which if that is true leaves me in the SH## due to the fact that the software I am using creates Inline CSS and I honestly have no idea how to modify that. I'm using WYSIWYG Website Builder 8.5.
The other thing that is frustrating would be that I have only 2 options... create all my content inside of WWB 8.5 or build it all inside of Edge.
Unfortunately, if I want to add new items to my website, I would have to overwrite the old HTML when I export out of WWB which will erase all the content from inside of Edge... so the only choice I really have is to add content via Edge to ensure I don't lose all of my hard work setting up animations etc in the site.
Problem is, for this to work out, all content needs to be added in Edge, not just the fancy stuff as it seems to be layer locked... Really dissapointed if there is nothing Edge can do to enable layer modification... that will make it far less valuable to people such as myself who do not have the timeframe to learn how to modify inline css or any css for that matter. (way I see it is that if you have to get in and work with code, then this type of "designer friendly" software hasn't really performed it's role properly)
Sure this will shock the majority of purist web builders and professionals who love to work with code day in day out notebook++ is their friend, but why can't things be done differently, does the code have to look all neat and tidy so long as it works?
EDIT 2
To clarify, all elements in the file are built and added outside of EDGE except for the most recent text field. This text field was thrown somewhere in between several of the layers on the website and needs to be adjusted. Also, layers created inside of WWB need to be adjusted outside of the software if possible to avoid re-exporting and the consequential wiping of the Index.html page I am adding animations to.Hi CX,
If I understand correctly, you're importing an existing HTML page into Animate and trying to arrange the layers? This isn't supported in Animate due to a lot of complications that can go on with your external document; you have to manually assign z-index via CSS to control this. We deliberately impose as little as possible on your existing markup since if starts being amended progromatically there's a huge potential for misintrepertation; for example, if you have a navigation menu on your page and Animate imposes heirarchy on another element, your nav might appear below the page content which is obviously undesirable.
Sarah -
Where can I find the GPS coordinates in iPhoto 11 for geotagged pics? In iPhoto 09 this information was available under the Photos menu "Show Extended Photo Information".
I think you can only see the map. To see the actual EXIF data you would need to export and use a viewer.
-
I have two user accounts defined on my Mac Pro. My primary user has iTunes with my music encoded as AAC, and has my iPhoto library. I have a second Music Server user with my music encoded as Apple Lossless. Both users run all the time so I can sync my iPod with the AAC files while playing the Lossless files through my audio system.
I set up the Apple TV to sync to the primary account, including all my photos. I set it to connect to the Music Server account, where there are no photos, to stream Lossless. Both connections work fine, but when I switch the Apple TV connection BACK from the Music Server account to the primary account, the Photos menu entry has gone missing. Cycling the power causes it to come back.
Anyone seen this? Any solutions?
Thanks.
Mac Pro Mac OS X (10.4.9)This is the answer I got in another thread about the same thing...
It worked for me
Many users of this device seem to be getting confused by the Sources menu. In that menu are listed the content sources available, starting with Apple tv (tv) at the top, followed by your sync host (indicated by double chain link icon), then all the stream hosts... When you go to the Sources menu and select tv, that enables the playing of content already sync'd. In this resulting set of content menus at the top level, you will see the Photos pick is there, assuming iTunes is set to sync photos.
Now, go to the Sources menu and select your sync host (the one with the double chain link icon). Look at the top content menu now, and you will not see the Photo pick present. That's because streaming photos is not currently supported, and hence you'll only see it in the tv menu set. -
Why are my recent photos turning blank
why are my recent photos turning blank all of a sudden? And how do I retrieve the pictures that were backed up to icloud?
There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. Describe the problem as fully as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
- What format is that flash drive?
Anything else you can think of that might help someone understand the problem you have.
Maybe you are looking for
-
Adobe Lightroom 2.7 exporting issue (says it is exporting at 300dpi but exports at 72dpi)
Hi, I have lightroom 2.7. I am a photographer that depends on lightroom. I do a lot of printing from images I export direct form it. I am trying to export images at 300dpi. I am selecting 300dpi in the export box under image sizing. I use mogrify p
-
Additional local currencies for company code
We are using company code currency INR -The clients wants additional currency USD as 2nd local currency--In OB22 the 2nd local currency -we want to give it to USD 2nd local currency is also by default system is showing INR- and it is in grey field-ho
-
Command h doesn't hide my selection..it hides my photoshop program
When I hit command H on my MAC it used to allow me to hide a selection. Now when I do it, the entire program is hidden instead.
-
Why customize application exception this way?
hi i found too different ways to customize a same application exception they actually work the same way but with a little difference that i can not figure out why the first one is public class BaseAppException extends Exception { static final lon
-
I'm trying to create a foreing key constraint, between tables in diferents schemas. but i get ora-01031 insufficient privileges error, which is the system privilege that i need?