N96 Memory problem (internal 16GB)

N96 Memory problem (internal 16GB)
If I fill the internal memory with more than approx 5gb the phone goes crazy...
(9,3Gb free)
Here are a couple of examples
* The phone becomes alot slower
* When powering up the phone stops at a white blank screen until * I press the power button again.
* When starting the music player all buttons associated with the music player(both on phone and handsfree) becomes unresponsive and the only way to stop the music is to remove the battery to turn off the phone.
Another problem that occasionally occurs even if I have more free space on my memory card is:
* When using the alarm clock there is a 33% chance that the phone will freeze when I turn it off. The only way to use the phone again is to remove the battery.
I haven't updated the phone yet because the update isn't available yet in sweden it seems.
Solved!
Go to Solution.

This may be the issue, New content!:
Scanning for new content (slowness in UI)
- This is somewhat improved in 11.018 but still:
- If you've loaded many Pictures, Videos or Music, you may see the device appear to slow down or even become unresponsive. After new content has been added, it is being scanned by the device and being added to the media applications. Until that happens, the new content may not be visible in these applications (e.g. Photos and Video Center application) right away. The phone will need to find the files and create the thumbnails and other details. This information creation takes time and the processing may slow down the device. Your best option is to open Video Center and Photos and leave open in the background then check after a few minutes if the videos and pictures you loaded are already there before using your device.
The same applies if you insert a memory card with lots of content on it.
- Do Not leave the Photos or video center in background during this time.
More tips:
http://portablevideo.blogspot.com/2008/10/some-tips-and-other-info-for-n96.html
640K Should be enough for everybody
El_Loco Nokia Video Blog

Similar Messages

Nokia n96 memory problem

Hello, I need answer to one problem. My nokia N 96 says that phone memory is full. How I can delete some files from phone memory? I have in download folder 18 MB some files but I cant access to this folder. Please help me

Make sure your photos and emails are stored on the Mass memory, make the storage location to mass memory in the camera settings, clear web browser cache go to Web > clear privacy data >cache, install applications on to the mass memory .
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

Report (uses LDB's) giving dump due to memory problem

Hi,
I have a report which is giving dump in production due to memory problem.
Memory is increased from basis part,but still getting same error.
the report uses Logical DataBases.
Can anyone suggest solution to solve this problem.
regards
Mallik

Hi Amit,
thanks for ur quick reply and ur idea "make changes in development and write the logic to read records in chunks".
I have n't worked on LDB's till now.So i Don't know how I can read the data in chunks from LDB's.
Can u Plz give some idea how to read data in chunks.
Iam also sending the code,if possible ,plz go thru it and give me some idea.
Hope u will help me.
CODE.
REPORT ZAROP028
ABLES: PROJ,                          " Project definition
        PRPS_R,                        " WBS element
        PRPS,                          " WBS elements
        TJ02T,                         " System Status Values
        TCJ1,                          " Project Types
        JEST,                          " Active System Status
        COSP1,                         " cost totals - external postings
        COSS1,                         " cost totals - internal postings
        COVP11,                        " Line Items by Prd & Doc Header
        COVP12,                        " Line Items by Prd & Doc Header
        BHDGD,                         " Page heading table.
        AUFK,                          " Order Master Data for WBS (LDB)
        ANEP,                          " Asset line item
        COBRB,                         "Distribution Rules Settlement Ru
        SETHIER,                       "Hierarchy Structure
        TKA02,                         "Controlling Area Assignment
        CEPC,                          "Profit Center Master Data
        PSDYPD,                        "Dummy struct for GET proj late
        PSDYPR,                        "Dummy struct for GET PRPS_R late
        PSDYNP.                        "Dummy struct for GET AUFK late
CONSTANTS:
          C_E                   TYPE C VALUE 'E',
          C_I                   TYPE C VALUE 'I',
          C_N                   TYPE C VALUE 'N',
          C_X                   TYPE C VALUE 'X',
          C_Y                   TYPE C VALUE 'Y',
          C_NE(2)               TYPE C VALUE 'NE',
          C_EQ(2)               TYPE C VALUE 'EQ',
          C_USD(3)              TYPE C VALUE 'USD',
          C_04(2)               TYPE C VALUE '04',
          C_I0046(5)            TYPE C VALUE 'I0046'
various working storage
DATA:
     W_TXT04(4) TYPE C.                      " make status uppercase
DATA: ACTIVE(1)        TYPE C VALUE 'A',       " type for status_flag
      INACTIVE(1)      TYPE C VALUE 'I',       " type for status_flag
      STATUS_FLAG(1)   TYPE C VALUE 'I',       " wbs active or inactive?
      INACTIVEDT       LIKE SY-DATUM,          " inactive date for wbs
      REC_FLAG         TYPE C VALUE 'N',       " records retrieved?
      DAYS_INACTIVE    TYPE I,                 " days wbs has been inac
      W_LOWINACT       TYPE I,                 " smallest inactive days
      WBS_CNT          TYPE I,                 " cnt for wbs in status
      W_AUC_COST       TYPE P DECIMALS 2,      " unsettled auc cost
      W_VNAME          LIKE PRPS_R-VNAME.      " venture number storage
DATA: BEGIN OF ITAB OCCURS 0,                              "MELI-5F2KMH
        COMPCODE       LIKE PROJ-VBUKR,    " company code
        PLANT          LIKE PROJ-WERKS,    " plant
        PROJECT        LIKE PROJ-PSPID,    " project
        NAME           LIKE PROJ-POST1,    " project description
        DINACT         TYPE I,             " days proj inactive
        PRCTR          LIKE PROJ-PRCTR,    " profit center
        SETID          LIKE SETHIER-SETID, " level 2 pc hier
        DESCRIPT       LIKE SETHEADERT-DESCRIPT,
        VERNA          LIKE PROJ-VERNA,    " person responsible
        AUC            TYPE P DECIMALS 2, " AUC unsettled amount
      END OF ITAB.
DATA: BEGIN OF I_INACT OCCURS 0,
        STAT LIKE JEST-STAT,
        INACT LIKE JEST-INACT,
      END OF I_INACT.
DATA: EQ_FLAG TYPE C,                       " system status flag
      NE_FLAG TYPE C.                       " system status flag
TYPES: BEGIN OF T_COSTS,
          PSPID LIKE PROJ-PSPID,
          BUDAT LIKE COVP11-BUDAT,
        END OF T_COSTS.
DATA: I_PROJ LIKE PROJ OCCURS 0 WITH HEADER LINE,
       I_PRPS_R LIKE PRPS_R OCCURS 0 WITH HEADER LINE,
       I_COSTS TYPE T_COSTS OCCURS 0 WITH HEADER LINE.
DATA: W_RECORDS TYPE I.
DATA: FOUND_FLAG TYPE C.                        " CHAD-4PRPDE
DATA: BEGIN OF I_HIER OCCURS 0.                             "FEAT-5BNRRP
        INCLUDE STRUCTURE SETHIER.                          "FEAT-5BNRRP
DATA: END OF I_HIER.                                        "FEAT-5BNRRP
RANGES: R_TJ02T FOR TJ02T-ISTAT.
DATA: W_LVL2 LIKE SETHIER-SETID.                            "MELI-5F2KMH
SELECTION-SCREEN BEGIN OF BLOCK PROJECT WITH FRAME TITLE TEXT-B01.
PARAMETERS:       P_BUDAT LIKE COVP11-BUDAT,
                  DAYINACT(3) TYPE N DEFAULT '090'.
SELECTION-SCREEN SKIP.                                      "FEAT-5BNRRP
PARAMETERS:       P_PC-SET LIKE CEPC-KHINR OBLIGATORY       "FEAT-5BNRRP
                  DEFAULT 'SCH_STREAM'.                     "FEAT-5BNRRP
SELECTION-SCREEN END OF BLOCK PROJECT.
SELECTION-SCREEN BEGIN OF BLOCK SORT WITH FRAME TITLE TEXT-B02.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(13) TEXT-C01.
SELECTION-SCREEN POSITION 15.
PARAMETERS: P_PLANT RADIOBUTTON GROUP SORT DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(13) TEXT-C03.                    "FEAT-5BNRRP
SELECTION-SCREEN POSITION 15.
PARAMETERS: P_PRCTR RADIOBUTTON GROUP SORT.                "FEAT-5BNRRP
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(13) TEXT-C04.
SELECTION-SCREEN POSITION 15.
PARAMETERS: P_DAYS RADIOBUTTON GROUP SORT.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK SORT.
AT SELECTION-SCREEN OUTPUT.
PERFORM USER_PARM_INIT.
AT SELECTION-SCREEN.
PERFORM CHECK_PROJ_CRITERIA.
START-OF-SELECTION.
PERFORM BUILD_PC_HIER USING P_PC-SET.
Project Definition                                                  *
GET PROJ.
MOVE-CORRESPONDING PROJ TO I_PROJ.                        "MELI-5F2KMH
APPEND I_PROJ.                                            "MELI-5F2KMH
CLEAR I_PROJ.
WBS element table
GET PRPS_R.
MOVE-CORRESPONDING PRPS_R TO I_PRPS_R.
APPEND I_PRPS_R.
CLEAR I_PRPS_R.
GET all order and cost objects associated with order and elements
GET AUFK.
GET COSP1.
CHECK COSP1-WRTTP EQ C_04.      " check if value type '04'
Get last date that the wbselement was updated and determine status
GET COVP11.
MOVE PROJ-PSPID TO I_COSTS-PSPID.
MOVE COVP11-BUDAT TO I_COSTS-BUDAT.
APPEND I_COSTS.
CLEAR I_COSTS.
Loop through Internal cost statements
GET COSS1.
CHECK COSS1-WRTTP EQ C_04.           " if value type is 04
Get last date that the wbselement was updated and determine status
GET COVP12.
MOVE PROJ-PSPID TO I_COSTS-PSPID.
MOVE COVP12-BUDAT TO I_COSTS-BUDAT.
APPEND I_COSTS.
CLEAR I_COSTS.
END-OF-SELECTION.
PERFORM BUILD_TABLE.
DELETE ITAB WHERE DINACT < DAYINACT.
DESCRIBE TABLE ITAB LINES W_RECORDS.
IF W_RECORDS = 0.
    MESSAGE I024.
ENDIF.
PERFORM WRITE_REPORT.
      FORM CHECK_PROJ_CRITERIA                                      *
This form verifies correct selection criteria has been entered from *
the selection screen inputs. If incorrect data has been entered the*
valid information messages are displayed.                           *
FORM CHECK_PROJ_CRITERIA.
check for either posting date or inactivity criteria but not both
IF NOT P_BUDAT IS INITIAL AND NOT DAYINACT IS INITIAL.
    MESSAGE E119.
ENDIF.
IF NOT DAYINACT IS INITIAL.          "check s/o day inactive
    IF NOT DAYINACT <= 998.
      MESSAGE E018.
    ELSE.
      INACTIVEDT = SY-DATUM - DAYINACT.
    ENDIF.
if days inactive is initial set INACTIVEDT using the posting date
ELSE.
    INACTIVEDT = P_BUDAT.
ENDIF.
ENDFORM.                    " CHECK_PROJ_CRITERIA
      FORM GET_AUC_COSTS                                            *
This form retrieves AUC costs for records based on AUFK2 where they *
meet project criteria. This pulls the unsettled amount on a AUC as *
a settlement receiver.                                              *
FORM GET_AUC_COSTS USING F_OBJNR F_BUKRS.
CONSTANTS:
   C_SETLEMENT_ANNUAL LIKE COBRB-PERBZ VALUE 'JHR',   "Annual Settlement
    C_DEP_AREA_STD     LIKE ANEP-AFABE VALUE '01'.    "Std depreciation
DATA: L_ANLC LIKE ANLC OCCURS 0 WITH HEADER LINE,
        L_ANLCV LIKE ANLCV OCCURS 0 WITH HEADER LINE,
        BEGIN OF L_COBRB OCCURS 0,                       "SRIN-6ZNEAR
        ANLN1 LIKE COBRB-ANLN1,
        ANLN2 LIKE COBRB-ANLN2,
        END OF L_COBRB,
        F_H_COST TYPE P DECIMALS 2.
SELECT ANLN1 ANLN2 FROM COBRB
    INTO TABLE L_COBRB                                    " SRIN-6ZNEAR
     WHERE OBJNR = F_OBJNR
       AND PERBZ = C_SETLEMENT_ANNUAL.
IF SY-SUBRC NE 0.                                        " gary-463qbd
    EXIT.                                                  " gary-463qbd
ENDIF.                                                   " gary-463qbd
LOOP AT L_COBRB.                                           " gary-463qbd
CLEAR: F_H_COST.
SELECT SINGLE * FROM ANLC
    INTO L_ANLC
    WHERE BUKRS = F_BUKRS AND
            ANLN1 = L_COBRB-ANLN1 AND
            ANLN2 = L_COBRB-ANLN2 AND
            GJAHR = SY-DATUM(4) AND
            AFABE = C_DEP_AREA_STD AND
            ZUJHR = '0000' AND
            ZUCOD = '0000'.
    IF SY-SUBRC = 0.
      CALL FUNCTION 'FI_AA_VALUES_CALCULATE'
           EXPORTING
                I_ANLC = L_ANLC
           IMPORTING
                E_ANLCV = L_ANLCV.
      F_H_COST = L_ANLCV-BCHWRT_LFD.
    ENDIF.
ADD: F_H_COST TO W_AUC_COST.
ENDLOOP.                                                   " gary-463qbd
ENDFORM.                    " GET_AUC_COSTS
      FORM CHECK_INACTIVE_DATE                                      *
This form checks the computed inactive date based on the formal     *
parameter DAYS_INACTIVE. If DAYS_INACTIVE is more current than the *
current lowest inactive date W_LOWINACT then W_LOWINACT is replaced *
with this value.                                                    *
FORM CHECK_INACTIVE_DATE USING DAYS_INACTIVE.
IF DAYS_INACTIVE < W_LOWINACT.
    MOVE DAYS_INACTIVE TO W_LOWINACT.
ELSEIF W_LOWINACT EQ 0.
    MOVE: DAYS_INACTIVE TO W_LOWINACT,
          W_LOWINACT    TO ITAB-DINACT.
ENDIF.
ENDFORM.                    " CHECK_INACTIVE_DATE
      FORM build_table                                               *
collect fields to the internal table ITAB                           *
FORM BUILD_TABLE.
SORT I_COSTS BY PSPID ASCENDING BUDAT DESCENDING.
LOOP AT I_PROJ.
    CLEAR W_AUC_COST.
    READ TABLE I_COSTS WITH KEY PSPID = I_PROJ-PSPID
                            BINARY SEARCH.
    IF SY-SUBRC = 0.
      ITAB-DINACT = SY-DATUM - I_COSTS-BUDAT.
    ELSE.
      ITAB-DINACT = SY-DATUM - I_PROJ-ERDAT.
    ENDIF.
    LOOP AT I_PRPS_R WHERE PSPHI = I_PROJ-PSPNR AND
                           BELKZ = 'X'.
      IF NOT I_PRPS_R-IMPRF IS INITIAL.
        PERFORM GET_AUC_COSTS USING I_PRPS_R-OBJNR
                                    I_PRPS_R-PBUKR.
      ELSE.
        CONTINUE.
      ENDIF.
    ENDLOOP.
    ITAB-COMPCODE = I_PROJ-VBUKR.
    ITAB-PLANT    = I_PROJ-WERKS.
    ITAB-PROJECT = I_PROJ-PSPID.
    ITAB-NAME     = I_PROJ-POST1.
    ITAB-PRCTR    = I_PROJ-PRCTR.
    ITAB-VERNA    = I_PROJ-VERNA.
    ITAB-AUC      = W_AUC_COST.
    IF ITAB-DINACT > DAYINACT.
      PERFORM GET_HIER_INFO.
    ENDIF.
    APPEND ITAB.
    CLEAR ITAB.
ENDLOOP.
ENDFORM.                    " BUILD_TABLE
      FORM STATUS_CHECK                                              *
Checks the active status of the project definition for the          *
parameter values assigned.                                          *
FORM STATUS_CHECK USING F_OBJNR.
begin of GARY-463QBD
CLEAR: I_INACT.
REFRESH: I_INACT.
MOVE: C_N TO EQ_FLAG,
        C_Y TO NE_FLAG.
retrieve status for a given record
SELECT STAT INACT
    INTO TABLE I_INACT
    FROM JEST
    WHERE OBJNR EQ F_OBJNR AND
          INACT NE C_X.
sort internal status entered by user
SORT R_TJ02T BY OPTION DESCENDING.
check all current object statuses meet user entered criteria
LOOP AT R_TJ02T WHERE OPTION EQ C_NE.
check for user selected options
    READ TABLE I_INACT WITH KEY STAT = R_TJ02T-LOW.
    IF SY-SUBRC EQ 0.
      MOVE C_N TO NE_FLAG.
      EXIT.
    ENDIF.
ENDLOOP.
LOOP AT R_TJ02T WHERE OPTION EQ C_EQ.
check for user selected options
    READ TABLE I_INACT WITH KEY STAT = R_TJ02T-LOW.
    IF SY-SUBRC EQ 0.
      MOVE C_Y TO EQ_FLAG.
      EXIT.
    ENDIF.
ENDLOOP.
check for no statuses entered as EQ option
LOOP AT R_TJ02T WHERE OPTION EQ C_EQ.
    EXIT.
ENDLOOP.
if so move c_y to eq_flag
IF SY-SUBRC NE 0.
    MOVE C_Y TO EQ_FLAG.
ENDIF.
if both eq_flag or ne_flag are true(c_y) move true to valid_flag
IF ( EQ_FLAG EQ C_N OR
       NE_FLAG EQ C_N ).
    REJECT 'PRPS_R'.
ENDIF.
end of GARY-463QBD
ENDFORM.                    " STATUS_CHECK
      Form WRITE_REPORT
FORM WRITE_REPORT.
IF P_PLANT EQ 'X'.
SORT ASCENDING BY ITAB-BUSAREA                           "FEAT-5BNRRP
    SORT ITAB ASCENDING BY PLANT
                           PROJECT.
ELSEIF P_PRCTR EQ 'X'.
   SORT ITAB ASCENDING BY PRCTR                             "FEAT-5BNRRP
                            PROJECT.
ELSE.
   SORT ITAB ASCENDING BY DINACT
                            PROJECT.
ENDIF.
FORMAT COLOR COL_BACKGROUND INTENSIFIED ON.
                                                     "MELI-5F2KMH
LOOP AT ITAB.                                               "MELI-5F2KMH
    WRITE:   /     ITAB-COMPCODE,
             9(4) ITAB-PLANT,
            17(12) ITAB-SETID,
            33(40) ITAB-DESCRIPT,
            77(10) ITAB-PRCTR,
            91(24) ITAB-PROJECT,
           119(40) ITAB-NAME,
           163(25) ITAB-VERNA,
           192(15) ITAB-AUC CURRENCY C_USD,
           211(8) ITAB-DINACT.
ENDLOOP.
ENDFORM.                    " WRITE_REPORT
      Form USER_PARM_INIT
Initializes user parameter settings
FORM USER_PARM_INIT.
ENDFORM.                    " USER_PARM_INIT
At top of every page, generate Amoco-standard header.
TOP-OF-PAGE.
MOVE: '0'       TO BHDGD-INIFL,
       SY-LINSZ   TO BHDGD-LINES,
       SY-UNAME   TO BHDGD-UNAME,
       SY-REPID   TO BHDGD-REPID,
       SY-TITLE   TO BHDGD-LINE1,
       SPACE      TO BHDGD-DOMAI,
       SPACE      TO BHDGD-SEPAR,
       SPACE      TO BHDGD-MIFFL.
IF P_PLANT EQ 'X'.
    MOVE TEXT-H01 TO BHDGD-LINE2.
ELSE.
    MOVE TEXT-H03 TO BHDGD-LINE2.                          "FEAT-5BNRRP
ENDIF.
temporarily clear sy-mandt to remove "europe" from header "FEAT-5BNRRP
DATA: W_MANDT LIKE SY-MANDT.
BHDGD-BUKRS = SPACE.
W_MANDT     = SY-MANDT.
CLEAR SY-MANDT.
FORMAT COLOR COL_BACKGROUND INTENSIFIED OFF.
PERFORM BATCH-HEADING(RSBTCHH0).
FORMAT RESET.
reset sy-mandt                                            "FEAT-5BNRRP
SY-MANDT = W_MANDT.
PERFORM PGH_WRITE_HEADING USING TEXT-003 INACTIVEDT.      "MELI-5F2KMH
SKIP 1.
ULINE.
write heading info
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE: /1(5)'CCode',
          9(5)'Plant',
          17(12)'Level 2 Node',
          33(40)'Level 2 Node Description',
          77(10)'Profit Ctr',
          91(18)'Project Definition',
         119(19)'Project Description',
          163(18)'Person Responsible',
          192(15)' AUC Unsettled',
          211(13)'Days Inactive'.
end FEAT-5BNRRP
BEGIN FEAT-5BNRRP NEW FORMS
FORM BUILD_PC_HIER
FORM BUILD_PC_HIER USING SETID.
DATA: W_SETID LIKE SETHIER-SETID,
         W_NEWSETID LIKE SETHIER-SETID.
CONCATENATE '0H' SETID INTO W_SETID.
CALL FUNCTION 'G_SET_GET_ID_FROM_NAME'
       EXPORTING
            SHORTNAME     = W_SETID
            TABNAME       = 'GLPCT'
            SETCLASS      = '0106'
            SUPRESS_POPUP = 'X'
            OLD_SETID     = W_NEWSETID
       IMPORTING
            NEW_SETID     = W_NEWSETID.
CALL FUNCTION 'G_SET_TREE_IMPORT'
       EXPORTING
            CLIENT                    = SY-MANDT
            LANGU                     = SY-LANGU
            SETID                     = W_NEWSETID
            TABNAME                   = 'GLPCT'
       TABLES
            SET_HIERARCHY             = I_HIER
       EXCEPTIONS
            SET_NOT_FOUND             = 1
            ILLEGAL_FIELD_REPLACEMENT = 2
            ILLEGAL_TABLE_REPLACEMENT = 3
            OTHERS                    = 4.
CLEAR I_HIER.
ENDFORM.
FORM GET_HIER_INFO
FORM GET_HIER_INFO.
DATA: W_SETID LIKE SETHIER-SETID,
         W_KHINR LIKE CEPC-KHINR,
         W_INDEX TYPE I.
CLEAR: W_SETID,
         W_KHINR,
         W_INDEX.
DETERMINE PROFIT CENTER NODE
SELECT SINGLE KHINR
    FROM CEPC
    INTO W_KHINR
    WHERE PRCTR EQ ITAB-PRCTR.
CONCATENATE '0106' I_PROJ-VKOKR W_KHINR
    INTO W_SETID.
READ TABLE I_HIER WITH KEY
                    SETID = W_SETID.
IF SY-SUBRC EQ 0.
    W_INDEX = SY-TABIX.
    DO.
      READ TABLE I_HIER INDEX W_INDEX.
      IF W_INDEX = 0.
        ITAB-SETID = 'Not Found'.
        EXIT.
      ENDIF.
      IF I_HIER-LEVEL = 1.
        ITAB-SETID = I_HIER-SETID+8(12).
        ITAB-DESCRIPT = I_HIER-DESCRIPT.
        EXIT.
      ENDIF.
      IF I_HIER-LEVEL = 2.
        ITAB-SETID = I_HIER-SETID+8(12).
        ITAB-DESCRIPT = I_HIER-DESCRIPT.
        EXIT.
      ENDIF.
      W_INDEX = W_INDEX - 1.
    ENDDO.
ELSE.
    ITAB-SETID = 'Not Found'.
ENDIF.
ENDFORM.
END FEAT-5BNRRP NEW FORMS
*&      Form PGH_WRITE_HEADING WR MELI-5F2KMH
FORM PGH_WRITE_HEADING USING L_V1 L_V2.
DATA: L_LINSZ    LIKE SY-LINSZ.
DATA: L_TITLEL   LIKE SY-TABIX.
DATA: L_START    LIKE SY-TABIX.
DATA: L_DATE     LIKE SY-DATUM.
DATA: L_FORMATTED_DATE(10) TYPE C.
DATA: L_TITLE(27) TYPE C.
MOVE L_V2 TO L_DATE.
WRITE L_DATE TO L_FORMATTED_DATE.
CONCATENATE L_V1 L_FORMATTED_DATE INTO L_TITLE
    SEPARATED BY SPACE.
L_LINSZ = SY-LINSZ.
L_TITLEL = STRLEN( L_TITLE ).
L_START = ( L_LINSZ / 2 ) - ( L_TITLEL / 2 ) - 2.
NEW-LINE.
POSITION L_START.
WRITE: L_TITLE.
regards
Mallik

Edit in HD, memory problem?

Hi there,
Just starting for editing HD footage but wondering should I get more memory for computer because testing to editing a 15 min. footage when export only first 2-5 min. movie I got, the rest is a still image (only last freeze frame when reach 5 min.). After that, I've tried to cut the footage in 2 min. than export fine. Is that the memory problem? Please advice.
Thanks.

Hi
a. Free space on Start-up Mac OS hard disk. How much ?
b. Is there any more hard disks ?
I have figured that my Mac works best with
• Macintosh HD / Mac OS and FinalCut
• Second internal HD - ALL Scratch and All material Audio/Photos etc. on this
Nothing to movie project on first one
alt
second HD as a FireWire - and IMPORTANT - Mac OS Extended formatted ! !
Yours Bengt W

A possible solution to FCP X memory problems - it is working for me so far

I think I may have found a way to prevent FCP from gobbling up all available memory (and bring my mac to its knees).
The idea came to me from a post by Tony Reidsma in this thread: https://discussions.apple.com/thread/3770230?start=0&tstart=0
He pointed to this page regarding memory usage in FCP X and Motion: http://bradbell.tv/filmmaking/improving-ram-performance-in-final-cut-pro-x/
The above page,mentions a preference setting that exists in Motion but "not in FCP X" - the setting for a "cache percentage".
This is supposed to determine how much of the available memory Motion should retain for caching content (or so I gather).
Sure enough, this preference is not there visibly in FCP X, but since FCP X and Motion share a common foundation, I thought it might be there anyway.
So after looking into the plist files in XCode, I found the name of this preference setting and used the defaults command in Terminal.
I have been throwing everything at it for a day now and it seems to be working well, so I thought I'd share.
Here is the relevant defaults command (NOTE: use this in Terminal when FCP X is NOT running):
defaults write com.apple.FinalCut OZPreferenceManager::CachePercentage -int 20
(this seems leave free about 20% of the ram available when FCP X starts; I have experimented with different values, and apparently the higher the number, the more free memory is untouched)
I have 15 applications running in MacBook Pro (with 8GB Ram), for hours, and no memory problems (and no need to "purge"). And FCP X and all other applications have not shown any of the slowdowns typical of low memory situations.
NOTE: While I have not experienced any negative effects, I have no internal knowledge of the software and no guarantee that this is effective or harmless.
One can revert the above setting by typing (or pasting) the following in Terminal (again, with FCP X NOT running):
defaults delete com.apple.FinalCut OZPreferenceManager::CachePercentage
If any of you try this and it does or does not work for you, I'd appreciate if you post your results back here.

Hey Luis, and everyone else.
I just tried your terminal script, and it has completely cured the sluggish problem with FCPX. Thank you, thank you , thank you!!.
I am working in a pretty large project, and now is flowing like a champ. Even skimmin is on point.
The project is 60 GB in size and I didnt create optimized media or used Proxy, so is working out of the RAW data, and boy must I say is flowing.
Again thank you dude.
PS: to you all out there, if you jump in a large project, I found that by making compund clip over compound clip helps the speed of the whole project. Example: I am braking down scenes in to compound clips, and portions of the scenes in to more compund clips, that has created a fast flow to go in an out of.
Macbook Pro 13 2009,
8GB ram / 750GB HDD
FCPX 10.0.0

Memory problem please help Idmediently

Hey guys, Ive got an ipad 3 (16gb) and I had a look on my memory i have a few games and apps (GarageBand, keynote, imovie, pages, monoply, game of life and a few others) and it said 12.2 gb used and 1.2gb available i think that's counted wrong and I know approx 1000mb is 1gb it's impossible what do I do to get it accurate, even my brain holds more memory than that! Please help ASAP also I've tried restarting it
Here is a list of apps:
GarageBand 696mb
Imovie 531mb
Ibooks 366mb
Keynote 362mb
Numbers 336mb
Pages 311mb
And 52 apps are 150mb and under
I know that I had the same number of apps yesterday and the memory was 8.2gb I want it to be accurate.
Reply ASAP.

Centipedee, No memory problem, you don't have enough room. It can take at least 2 times the required memory to load an app to the iPod. Once it loads it only requires 1.8GB of memory space but to get it there you'll need at least (maybe more) 3.6GB of space, I know it sounds screwy but it's how it works. Hope this helps, Good luck.

Memory Problem with SEt and GET parameter

hi,
I m doing exits. I have one exit for importing and another one for changing parameter.
SET PARAMETER exit code is ....
*data:v_nba like eban-bsart,
       v_nbc like eban-bsart,
       v_nbo like eban-bsart.
       v_nbc = 'CAPX'.
       v_nbo = 'OPEX'.
       v_nba = 'OVH'.
if im_data_new-werks is initial.
if im_data_new-knttp is initial.
    if im_data_new-bsart = 'NBC' or im_data_new-bsart = 'SERC' or im_data_new-bsart = 'SERI'
       or im_data_new-bsart = 'SER' or im_data_new-bsart = 'SERM' or im_data_new-bsart = 'NBI'.
      set parameter id 'ZC1' field v_nbc.
    elseif im_data_new-bsart = 'NBO' or im_data_new-bsart = 'NBM' or im_data_new-bsart = 'SERO'.
      set parameter id 'ZC2' field v_nbo.
    elseif im_data_new-bsart = 'NBA' or im_data_new-bsart = 'SERA'.
      set parameter id 'ZC3' field v_nba.
    endif.
endif.
endif. *
and GET PARAMETER CODE IS....
get parameter id 'ZC1' field c_fmderive-fund.
get parameter id 'ZC2' field c_fmderive-fund.
get parameter id 'ZC3' field c_fmderive-fund.
FREE MEMORY ID 'ZC1'.
FREE MEMORY ID 'ZC2'.
   FREE MEMORY ID 'ZC3'.
In this code i m facing memory problem.
It is not refreshing the memory every time.
So plz give me proper solution.
Its urgent.
Thanks
Ranveer

Hi,
   I suppose you are trying to store some particular value in memory in one program and then retieve it in another.
If so try using EXPORT data TO MEMORY ID 'ZC1'. and IMPORT data FROM MEMORY ID 'ZC1'.
To use SET PARAMETER/GET PARAMETER the specified parameter name should be in table TPARA. Which I don't think is there in your case.
Sample Code :
Data declarations for the function codes to be transferred
DATA : v_first TYPE syucomm,
       v_second TYPE syucomm.
CONSTANTS : c_memid TYPE char10 VALUE 'ZCCBPR1'.
Move the function codes to the program varaibles
v_first = gv_bdt_fcode.
v_second = sy-ucomm.
Export the function codes to Memory ID
EXPORT v_first
       v_second TO MEMORY ID c_memid.        "ZCCBPR1 --- Here you are sending the values to memory
Then retrieve it.
Retrieve the function codes from the Memory ID
IMPORT v_first TO v_fcode_1
         v_second TO v_fcode_2
FROM MEMORY ID c_memid.                                   "ZCCBPR1
FREE MEMORY ID c_memid.                                   "ZCCBPR1
After reading the values from memory ID free them your problem should be solved.
Thanks
Barada
Edited by: Baradakanta Swain on May 27, 2008 10:20 AM

Memory Problems with Adobe PDF iFilter for 64-bit

In preparation to rebuild my Windows Search Index, I installed the Adobe PDF iFilter for 64-bit on my system (Vista Business 64). When I finally rebuilt the index, I wasn't too surprised by what I saw happen, namely, the SearchFilter.exe process would kick in whenever I wasn't using the system and just eat RAM. One time I turned it on and it had allocated over 4,000 MB (and my system only has 4,030 MB available) so of course it was forcing all the other processes to hard fault (ie. everything was moving like molasses--for example, it took 20 minutes to put the thing to sleep). But I just let it do it's work, figuring that perhaps this was to be expected relative to the small library of PDF's that I've accumulated on my computer, ranging from LaTeX generated text files, to containers for hi-res scans. So, after a day and a half of basically not using my laptop, everything finally calmed down and I enjoyed the benefits of searching the content of my library from the Windows Start menu--for a short while.
However, to my dismay I've encountered the problem that this freezing of my computer would now occur after everytime I download a new PDF (in this particular case they were Google Books scans) and then left the computer to idle. Again, the SearchFilter.exe would allocate all of my RAM for itself and just push everything else onto the Virtual RAM, which means the SLOWEST possibly fetching you can get. I had to uninstall as this was making my computer unusable for 15-30 minutes after each idle. Everything is back in working order without the iFilter, but I would like to know if anyone has reported such problems on x64 systems. Obviously, I will also report the problem to Microsoft, since the search engine should certainly have the precaution to handle such memory problems.   However, it is a problem that is created by the Adobe PDF iFilter interacting with the Windows Search engine.

Hello,
We believe we have figured this out. It looks like it has to do with the length of the default folder location for the Adobe iFilter.
I was able to reproduce the issue and the following resolved it for me. See if this resolves it for you all as well.
Here is how to get Adobe Version 11 PDF filter to work.
1 . If you haven’t already, run the following in SQL Server:
Sp_fulltext_service ‘Load_os_resources’, 1
Go
--you might also need to run:
sp_fulltext_service ‘Verify_signature’,0 --This is used to validate trusted iFilters. 0 disables it. So use with caution.
--go
2. Stop SQL Server. (Make sure FDHost.exe stops)
3.
Uninstall the Adobe ifilter (because it defaulted to having spaces or the folder name is too long).
4.
Reinstall the Adobe iFilter and when it prompts for where to install it, change it to: C:\Program Files\Adobe\PDFiFilter
5.  Once the installation finishes, go the computer’s Environment variables. Add the following to the PATH.
C:\Program Files\Adobe\PDFiFilter\BIN
NOTE: it must include the BIN folder
NOTE: If you had the OLD location that included spaces, remove it from the path environment variable.
6. Start SQL Server
7.  IF you had an existing Full-text index on PDFs, drop the full-text index and recreate it.
8. You should now get results when you run sys.dm_fts_index_keywords('db','tblname') --Note: Change db to be the actual database name and tblname to be the actual table name.
Give this a try and see if this fixes yours.
Sincerely,
Rob Beene, MSFT

Memory problems with PreparedStatements

Driver: 9.0.1 JDBC Thin
I am having memory problems using "PreparedStatement" via jdbc.
After profiling our application, we found that a large number oracle.jdbc.ttc7.TTCItem objects were being created, but not released, even though we were "closing" the ResultSets of a prepared statements.
Tracing through the application, it appears that most of these TTCItem objects are created when the statement is executed (not when prepared), therefore I would have assumed that they would be released when the ResultSet is close, but this does not seem to be the case.
We tend to have a large number of PreparedStatement objects in use (over 100, most with closed ResultSets) and find that our application is using huge amounts of memory when compared to using the same code, but closing the PreparedStatement at the same time as closing the ResultSet.
Has anyone else found similar problems? If so, does anyone have a work-around or know if this is something that Oracle is looking at fixing?
Thanks
Bruce Crosgrove

From your mail, it is not very clear:
a) whether your session is an HTTPSession or an application defined
session.
b) What is meant by saying: JSP/Servlet is growing.
However, some pointers:
a) Are there any timeouts associated with session.
b) Try to profile your code to see what is causing the memory leak.
c) Are there references to stale data in your application code.
Marilla Bax wrote:
hi,
we have some memory - problems with the WebLogic Application Server
4.5.1 on Sun Solaris
In our Customer Projects we are working with EJB's. for each customer
transaction we create a session to the weblogic application server.
now there are some urgent problems with the java process on the server.
for each session there were allocated 200 - 500 kb memory, within a day
the JSP process on our server is growing for each session and don't
reallocate the reserved memory for the old session. as a work around we
now restart the server every night.
How can we solve this problem ?? Is it a problem with the operating
system or the application server or the EJB's ?? Do you have problems
like this before ?
greetings from germany,

Dual Channel memory problems on Neo 875P

I am having considerable trouble getting the NEO 875P to work with dual channel DDR400 DIMMs. I have two Kingston KVR400X64C25 DDR400 256MB memory modules, each of which works correctly by itself. However, once I move one
of the modules to channel B, I cannot boot my operating system (currently Windows XP.) The problem also occurs in Windows 2000, which I also have on the system. I receive blue screen errors that indicate paging/memory problems. I have upgraded my BIOS to the latest version (1.3)* in the hope that it would solve my problems, but it has not. The POST screen detects that there is 512MB of memory working in Dual Channel mode, but even when it does get through the O/S booting process (rarely), it crashes within minutes. Putting just one of the chips in makes the system perfectly stable. If anyone has any information, please let me know!
Thanks,
Jim Keller
http://www.centerfuse.net
* My board was dead after trying to flash the 1.3 BIOS, but after about 10 attempts of using CTRL+HOME method to recover the BIOS, it finally worked with version 1.0. I then re-flashed with 1.3, and it rebooted fine. Are there any updates about all of the problems with v1.3 ?

>I can only answer based on what I've read on this forum
I figured as much, I was just wondering if you knew whether MSI themselves frequents the forums or answers emails sufficiently.
I've had an interesting development though. I stumbled upon Tom's Hardware Guide's article about 875P motherboards at http://www17.tomshardware.com/motherboard/20030519/i875p-01.html
They mentioned that they needed to increase the memory voltage from 2.5 to 2.6 in the BIOS to get some memory modules to work. I did this, and for the first time, I am running in Dual channel DDR mode. However, the article also mentions that "the system does not run completely stably", so I guess I'll have to wait and see if it crashes again. However, I'm far enough beyond the XP splash screen to post this message, so I guess we're getting somewhere!
-Jim Keller
http://www.centerfuse.net

MS-6380 Memory Problem

I have a MS-6380E with the latest BIOS and chipset drivers. Athlon 1.5 Ghz processor, Geo4 Ti series card with 64MB ram and latest drivers and an SBLive Platinum 5.1 card, with the latest drivers. Windows XP Pro is the operating system. The system has 2 PC2100 256MB sticks of DDR ram on the board. This past weekend I tried to install a 3rd chip, PC2100 512MB chip to bring the system up to a Gig of ram. The system would reboot immediatly upon logging into Windows. I took the memory back and exchanged it for another. Installed it with similar results. I tried all three slots with the new memory and the two existing. No, I didn't try the new memory by itself. I finally go it to appear stable for a little bit but I also play Dark Age of Camelot and the latest symptoms were that the system would kick me back to the desktop as soon as I got to the initial "connecting" screen in Dark Age. I also had other odd behaviour with the additional ram installed like my modem taking longer to validate my connection. When I went back to the pre-existing configuration 512MB total, everything would stabilize. The DDR brand was Centron, I know it's not the same manufacturor as my other two sticks but I don't recall the brand on those. Also, just in case you needed to know Dark Age of Camelot is an MMORPG. I checked their tech section and nothing on this problem and their game. I've since returned the memory and have resigned to maxing out at 512MB tho the system specs say I can go to 3GB. I really like this board but am frustrated at the memory problem.

http://www.msi.com.tw/program/service/forum/search.php?boardid=
6380 covers a hell of a lot of boards
getting same make and model of ram is generally advisable to

Nokia C5-03 Low memory problems ( Other Files )

Please help. I have a nokia C5-03 the handset is showing phone memory is full. I have checked and uninstalled all unecessay applications. But problem is still there. when i check the phone memory it indicates that i have other files of 42mb installed and using phone memory. however i am unable to check what other files are installed or classfied as other files. Can you please assist me so i can know what these other files consist of or where they are located.

Hi Thetao,
I typed a more extensive reaction before, but it got lost when I pressed "post". Therefore I just respond to the main points that you mentioned (and some I found out myself).
Strange: I can't find the 40 MB Maximum User Storage on the Nokia website anymore (nor the 75 MB). But it sounds very familiar to me. It looks to me as if they removed this from the phone specs, also of other Smartphones by the way.
Yesterday, I deleted some small apps that I don't use (anymore) such as InternetRadio and I also removed Nokia email. Although the apps were below 2 MB together, this freed up over 7 MB of Phone memory (24 MB free now)! I think there were still some old emails stored in C: which I couldn't delete any other way. This helped me a great deal already but I tried your suggestions as well.
1. No map data or CITIES folder on C: 2. Switched messages memory to phone (and phone to offline mode) and I did indeed find a forgotten email account with 30 email messages. Not much but I had 24,7 MB free after that. Of course, I put messages memory back to the memorycard. 3. Used the free edition of Y-Browser to manually delete the cache folder. Not much data in that, but 25,1 MB free after that. Nice tool, with which you can reach folders that normally stay hidden! Used YBrowser to search all C: for files over 300 kB. Only 2 files: boot_space.txt in C:\ (500 kB, contains only the X repeatedly as far as I see, but is probably essential for the operating system) and C:\resource\python25\pyton25.zip (1 MB). It looks like an installation package, but I'm not sure if I can delete it. By the way: YBrowser hasn't made a shortcut in one of the menus. Only way that I found to start it was to look for it using the Phone's search function. Is there a way to make this shortcut myself?
4. Yes I did. No Images folder on C: anymore, nor other big files (see point 3)
5. I use Bluetooth for file transfer sometimes, mainly for installation files (such as YBrowser.sis, but I did this one via USB-cable). However, no big files are left on C: so I don't think I have this problem.
6. I tried to delete Nokia Chat yesterday as well (with the other apps), but it won't be uninstalled the normal way as it says "Uninstall cancelled" (not sure about the exact translation since my phone 'speaks' Dutch) Do you know if there's another way to get rid of this 3 MB app that I don't use at all?
I think I may have found an explanation and a solution for the memory problem while navigating. You mentioned the "memory in use" in the map settings. Above that option there's a slide bar for the % of memory that the navigation can use. Standard is 70%. I always thought this was about storage memory on (in my case) the memorycard. Another topic mentioned that this the working memory (so the RAM) that the navigation may use. Setting it to 70% means there's only 30% left for other apps that run in the background. The other topic states that this is nog enough so the slider should be set to for instance 30% for navigation leaving 70% free for "the phone". From behind my computer, navigation seems much more stable. I'll try this setting in my car soon and let you know how it works.
Thanks a lot for thinking along with me so far! There's already 25,1 MB of space, which is great since it was only 7 MB last Sunday. And navigation looks more stable. I'd appreciate if you have some more answers to my latest questions, but if not I think my phone will work a lot better already!
Regards, Paul

Memory problem with jdk/jre 1.1.8

My name is BERGMANN Yannick.
I'm working for IRM in Li?ge and we developped an application (user interface for an industrial measurement system) in Java (JDK/JRE version : 1.1.8).
We have a big memory problem with this application :
- This user interface is running on a WINDOWS NT PC with 128MB.
- This is the command to lanch our application :
C:\Program Files\JavaSoft\JRE\1.1\bin\jrew.exe" -ms32m -mx32m -cp "\Program Files\HMI\HMI.zip;\Velocis\Add_On\Jdbc\raima.jar;\Program Files\Swing-1.1.1\swingall.jar" be.irm.hmi.kernel.HMI -t15 -d"Velocis rdstcp" -newdb -mf1m -mr20
- When our application is running, everything seems to be OK in memory for it. The garbage collector seems to work properly and our application has always at least 5MB free memory (We use the java instruction "Runtime.getRuntime().freeMemory()" to know this).
- But when we look in the "Windows NT task manager" for the "jrew" application, the memory increases ALWAYS.
- After 5 days our application is completely frozen and blocked ...???
- here is a memory map of our Windows NT PC :
     "jre.exe"     "commit total"     "commit limit"     "commit peak"     "physical total"     "physical available"     "physical file cache"
Monday     92264     109256     194944     109424     130484     19492     6216
Thuesday     106196     123072     194944     123348     130484     6072     5840
Wednesday     110836     132288     194944     132416     130484     4408     5140
Thursday     108200     144980     194944     145140     130484     4888     5148
Friday     109440     158319     194944     161334     130484     4911     4992
Monday     111600     209060     228548     209148     130484     5184     3484
Have you any idea of what is happening with "jrew" in memory ?
We have had this problem for six month and we are totaly out of idea.
If you can give us any idea, we'll appreciate a lot.
Thanks in advance,
BERGMANN Yannick
IRM SA - Software Engineer
Tel. (32)4/239.90.10
Tel. (32)4/239.90.74 (direct)
Fax (32)4/263.40.97
E-mail [email protected]

We had a memory problem with a swing applet in our company. The major reason for this was that we added new components in a JTree and removed them later again, and the components we removed were never garbage collected. This was because with these components we added different listeners, and we didn't remove the listeners after we didn't need the components anymore. After we corrected this, the components where garbage collected.
Perhaps it's a similar problem you have, or I have no idea. Check that you remove actionlisteners, mouselisteners etc from components you want to be garbage collected.
You could also test your application with OptimizeIt to see what objects you create and how many you get of them over time: http://www.vmgear.com

Memory problem with 5330 XpressMusic

Hi,
I seem to have a memory problem with my 5330, I have a 1Gb micro disc installed. My son sent me a photo from his phone, when it arrived I got a warning on the scren that 'there is not enough memory to receive messages', I have tried to delete as much as I can, a lot tells me I can't delete it, but I still get the same warning. This warnig shows up each time I switch on the phone. How can I get myself more space? Can I move things from the phone memory to the memory card?
Gerald
Message Edited by warmbells on 01-Nov-2009 06:19 PM

Are you sure you're using a 5330 XpressMusic? Or is it a 5320 XpressMusic? The former is yet to be released, AFAIK.
Assuming that you are using a 5320, try these steps:
-> Move all photos, music, videos stored in the phone memory to the memory card. You can use the built-in File Manager to accomplish this.
-> Delete all files that you would've received via bluetooth, present in your Inbox. You can save them to the mass storage.
-> Clear the browser cache.
-> Clear the Sent Items folder.
-> Make sure you don't have too many messages in your inbox.
Hope this helps
Cheers,
DeepestBlue
5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

Memory problem with ITS

Hello friends,
we are having memory problem with integrated ITS.. on one application server all memory of ITS is getting exhausted. We think few users take lots of memory and it never gets released.
I checked Note 742048 - Integrated ITS, memory requirement in application server but parameters looks ok. Sometime, when i kill a user session in SM04, some part of memory was released. However i am not able to find which sessions are taking max memory as i do not see any workproess active in SM50.
in SITSPMON :
Memory Consumption: Overview
Sessions:     27      24,710,431 Bytes       915,201 Bytes/Session       2,433,8
Templates:            14,793,306 Bytes
    Sess. & Templ.    39,503,737 Bytes     Currently available to ITS: 81.92MB o
ITS Session     memory type     Peak          Memory     Total     Current
USER 001 2463     Session Memory     1,955,757     938,597     7,574     723
USER 001 2503     Session Memory     2,008,621     965,245     9,181     930
USER 001 2523     Session Memory     2,412,477     856,925     11,327     82
thanks
ashish

and what is 2463 is line : USER(user ID) 001(Client) 2463(??) Session Memory 1,955,757 938,597 7,574 723 as this is not a work process ID.]
Basically i am trying to correlate ITS session with SM04 Session of user.

N96 Memory problem (internal 16GB)

Similar Messages

Maybe you are looking for