N96 - My list of problems found - up to now!

Wi-Fi is hit and miss.
I put the code in to connect but I get a message saying ‘connection cannot be made’. Other’s can log on easily, laptops, i-phones etc.
My ring tone is quiet.
In general settings I have the ring volume high but when my phone rings the ring is quiet.
Data transfer.
If, for example, I’m putting a tune on my phone I get a data transfer in progress massage on my phone. The problem is this message does not go away even if the transfer has taken place leaving me guessing if I have down-loaded successfully. I have to unplug the lead and hope for the best.
Data transfer 2. A lot of the time the Nokia PC Suite cannot ‘see’ my phone. Also I am confused which transfer system to use. There are 4 options, Suite, Mass, Media and another. Why not simply have 1 option?
Maps. I thought that this would be as quick as a tom-tom. It takes ages to get any GPS signal, if at all. I have installed UK maps but it isn’t very user friendly, i.e., no post code input option. I’m thinking that this feature may be useless.
TV. Why advertise the phone as having TV if this option is not installed on a UK phone!
Does anyone know if Nokia Tech guys read this forum?
Also, when is new software available?

Wi-Fi is hit and miss.
Not much I can offer as advise. Check that the battery cover is correctly assembled. The battery cover contains the WiFi antenna.
My ring tone is quiet.
If you're using firmware 10.065 then upgrade to 11.018. If 11.018 is not yet available for you then DISABLE 3D ringtones. This may fix the problem.
Data transfer.
If, for example, I’m putting a tune on my phone I get a data transfer in progress massage on my phone. The problem is this message does not go away even if the transfer has taken place leaving me guessing if I have down-loaded successfully. I have to unplug the lead and hope for the best.
Several comments. First use File Transfer and drag and drop the music files to the Mass memory. This is BY FAR the fastest way to transfer files. For music you can use also PC SUITE mode and use WINDOWS MEDIA PLAYER 11 to SYNC the songs, but I think File transfer is even faster than this.
Once you're done STOP the device in the windows tray. The gray box icon with a green arrow that allows you to STOP the USB device that will ensure you don't delete any data.
Data transfer 2. A lot of the time the Nokia PC Suite cannot ‘see’ my phone. Also I am confused which transfer system to use. There are 4 options, Suite, Mass, Media and another. Why not simply have 1 option?
PC SUITE: Use this to synch contacts, create backups. Also this enables MTP mode so you can use Windows Media Player to sync music and videos to the phone. I don't recommend using Nokia Video Manager or Nokia Music Manager for Videos and Music.
Mass Storage (FILE TRANSFER) this mode will mount the Mass memory and the Memory card as external Drives in Windows. Then you can use them like any drive in Windows, create folders, copy files, etc. This is the fastest mode to move data.
MEDIA- Is the same as PC SUITE but without the PC SUITE stuff so that only MTP mode is active.
Image TRANSFER: This is for PICTBRIDGE printers.
Maps. I thought that this would be as quick as a tom-tom. It takes ages to get any GPS signal, if at all. I have installed UK maps but it isn’t very user friendly, i.e., no post code input option. I’m thinking that this feature may be useless.
Ensure that you have turned on A-GPS. Go to Settings-> General -> Positioning -> Positioning Methods. Check that Assisted GPS is checked.
Don't understand what you mean for no post code input. If you select Options -> Search -> Addresses there's a field to input the postal code.
TV. Why advertise the phone as having TV if this option is not installed on a UK phone!
iPlayer is available in the UK to access BBC channels. Doing a bit of reseach/reading the restrictions would've shown that your operator had to support DVB-h to access real TV. So I don't know what else Nokia can do... In some markets (Germany, Finland, Italy, Netherlands, Switzerland, etc.) they do have DVB-h.
Does anyone know if Nokia Tech guys read this forum?
Yes I know. They DOn't
Also, when is new software available?
It's already available for the vanilla products, and specific operators or country codes will start showing gradually, you need to check the Software Update site often.
LASTLY. It's always a good idea to browse or read the user manual to understand how to use your device.
640K Should be enough for everybody
El_Loco Nokia Video Blog

Similar Messages

Long List of Problems and no one will help!!!

I have had NOTHING but problems with this phone since the sales clerk talked me into buying it. I've had it for a little over a year and a half. It's had "Software" issues out the rear and it's been replaced and still has the very same issues. YET I can't swap it out with another phone without paying through the nose for a new one. Verizon sold me a phone that does not work completely. Verizon keeps replacing it with the same phone and numerous Verizon employees keep telling me that this phone has MANY known issues, LOTS of complaints. Yet I am still stuck with a phone that is barely useable. I am so disgusted right now.
Here is just a SMALL sampling of issues with my phone and I am still being denied a new phone unless I want to pay $600. I have 4 weeks until I can "Upgrade" and I still can't even get an early upgrade. I have been VERY patient waiting for my "TWO YEARS" to be "UP" so I can upgrade without being robbed. This in addition to suffering through the Black Berry Storm that SUCKED and was replaced 7 times in a year and a half period due to "Software issues" I will admit, two of those replacements were my fault - one got wet and the other was stolen, but still, 5 replacements is not acceptable. Then I went to buy my new phone (Glory day for me) then I get talked into this Fascinate and it's just as bad as the Storm was, if not worse. I can't seem to win. I have decided to go for an iPhone.
Here is my list of problems and NO one can fix them, no one can help, I get told that this is a known problem yet Verizon won't take care of their customers that got screwed by this phone. I've been a loyal customer for 7 years. I love the actual cellular service, I rarely get dropped calls, which is why I stick with verizon, but I am seriously considering jumping ship, because even though I'm loyal, I buy my phones through them, I can't get support.
The SHORT LIST of problems that makes this phone 100% unacceptable:
1) Can't text 3/4 of the time because a little grey box pops up in the text box and it won't accept anything I type into it.
2) Have not been able to send picture emails for several months now - Verizon can't figure out why. My husband misses out on a lot of pics of our kids, I like to text him fun pics of them doing things or when we are on vacation without him.
3) phone freezes up on a regular basis. Several times a day. I have to pull the battery out and reboot.
4) Sometimes I can't answer the phone when it rings - the phone rings and when I slide the puzzle piece to answer the phone, it freezes and continues to ring long after the person has hung up and the only way to get it to stop ringing is to pull the battery out and reboot the whole thing.
5) a LOT of times, people will call my phone and it won't ring - it goes straight to voicemail. I have had people call me when they are sitting right next to me and it doesn't ring (and yes, I've checked the volume, it's on, the phone is on) sometimes though, it rings and I actually can answer it, but lately, it's becoming more and more of a problem being able to receive and actually be able to answer them
6) I can't use Facebook. It takes forever to actually get into FB and when I do, it only shows about 5 posts before it freezes. A few weeks ago, I could post to FB but only here and there, now I can't post from FB from my phone at all. I know that's likely due to the APP - but FB on this phone has always sucked.
7) At home, even when I standing next to my wireless router, it says I have "Lost Signal", yet all of my other wireless devices work from 5400 square feet away, on the other side of the house, upstairs. Even when I'm standing in the Verizon store, it says "Internet Connection Lost" It is so frustrating. I am a busy mom and I have 5 minuts to myself and I can't even check FB or browse on the internet and yes, I have checked, all of my connections are set up correctly. My wireless is enabled on my phone. But it still doesn't work.
8) Email - it's constantly refreshing, even though I have it set to only refresh once and hour. I think I even changed it to once a day. Instead, that little "refresh wheel" spins constantly on my phone and while this little refresh wheel spins, I can't read email, I can't write email and I can't send email. When it finally stops and I open an email and the try to respond and write back, that little refresh wheel starts spinning again and then I have to wait until i can get home to a real computer to actually read & Respond to email.
9) Calendar inputs the wrong time. I had a dentist appt at 9:30am. I set it as 9:30am. When I saved it, it changed it to 10:40am. I went back into the calendar function to change it thinking I had input the wrong time, but no, when I went to edit it, my 9:30 time was set, I hit save again and saving it changed it to 10:40. WTH? I can't even rely on the calendar function.
10) Two weeks ago, I woke up, looked at my clock, which I also rely on as an alarm clock. The room was dark. The clock said 5:30am. But for some reason, it felt later. Sure enough, I get up, check my husbands alarm clock, it's 7:30am. I am so thankful I had a gut feeling and looked at another clock. I did not change my time zone on my phone (in fact, I went looking for Time change stuff and I couldn't even find it. Then two hours later, the phone went back to normal time all on it's own.
11) Text messages occasionally pop up and it tells me it's from Jay Smith (Not real name) and when I open the actual text, it's from Sarah Jenkins (not real name) WTH? How am I supposed to rely on text if its confused itself?
12) Phone shuts itself off all the time, several times a day. All of a sudden I will hear the musical tone of my phone shutting down and then at some point, it will turn itself back on. When I turn it back on, it resends out old text messages (See below)
13) Text message randomly sends out old text messages to people that I sent text messages out to months ago. So the people will text me back saying "WTHeck is this about?" and I look and it's an old text message I sent them a month or two ago. It usually does this when the phone freezes, shuts itself down and restarts. I have found out that IF I delete my text messages timely, then it won't resend out any old text messages, but I am not very good about deleting stuff and often times, text message contains some important information that I haven't yet had the time to copy down and save. I shouldn't HAVE to delete my text messages so it doesn't randomly send out text messages to people.
14) Often times, I will send out a text message and it will fail to send the message and I get a text message saying my text message has failed.
I could go on, but I think that will give sufficient evidence that this phone stinks and that Verizon should give people owning this phone a chance to get a new phone without raping their wallets.
Maybe someone here will listen? Because no one at the store does... I pay for Verizon service that I barely even get to use because my phone doesn't perform like the guy who sold it to me told me it would.
CAN YOU HEAR ME NOW????

About the only thing I can say is to keep going to Verizon, or calling customer service to get them to look at the issues. I talked to 1 rep that told me to dial either 4# symbols, or 4* symbols (Can't remember which it was) after I got the VM message but did not have the phone ring, so it would mark my account record and they could search and troubleshoot the issue.
As far as your upgrade, I think you have done the right thing so far, and that is signing up on this forum, that way you can look at the different phone forums and see what issues that people are having. Talking to people that have the phone is a great way to find out what the issues are. Verizon Sales reps will only sell you the latest and greatest, or if there is something that they are being told to push to get out of stock.
Going with an iPhone is ok, just make sure it is correct for you, because like you said earlier, once it is done, it is done and you are stuck with it for 2 years. I had a friend who made a knee-jerk reaction to a bad phone, and did the same thing. They regretted it after 6 months. I am not saying the iPhone will be bad for you, just make sure you do your homework.

Problems found during the EXPORT to specified keyin table.

Hi
I am getting this error in sending iDOC system( We have iDOC-XI-iDOC Scenario.) I tried to reregister the queues but still nothing is passing thru XI.
Thanks,
Manish

Acutally I am getting this DUMP in ST22.
<i><b>ShrtText                                                                                |
Problems found during the EXPORT to specified key in table.
What happened?
Error in ABAP application program.
The current ABAP program "CL_XMS_PERSIST================CP" had to be
terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
The table " " does not contain any data records with the specified key.
The system called the internal SAP database interface because it
expected to find such a key.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"EXPORT_TABLE_UPDATE_CONFLICT" C
"CL_XMS_PERSIST================CP" or "CL_XMS_PERSIST================CM00W"
"INSERT_MSG_ALL"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
Information on where terminated
The termination occurred in the ABAP program "CL_XMS_PERSIST================CP"
in "INSERT_MSG_ALL".
The main program was "SAPMSSY1 ".
The termination occurred in line 302 of the source code of the (Include)
program "CL_XMS_PERSIST================CM00W"
of the source code of program "CL_XMS_PERSIST================CM00W" (when
calling the editor 3020).
Source Code Extract
Line
SourceCde
272
IF lv_switch_mode = 2.
273
IF export_to_db_optimized = co_true.
274
CALL FUNCTION 'SXMB_EXPORT_TO_DB'
275
EXPORTING
276
iv_kind        = 'P'
277
it_prop        = lt_prop
278
iv_switch_mode = lv_switch_mode
279
iv_msgguid     = clustkey-msgguid
280
iv_pid         = clustkey-pid
281
iv_vers        = clustkey-vers.
282
ELSE.
283
EXPORT lt_prop FROM lt_prop
284
TO DATABASE sxmsclup2(is) FROM wa_clup ID clustkey.
285
ENDIF.
286
ELSE.
287
IF export_to_db_optimized = co_true.
288
CALL FUNCTION 'SXMB_EXPORT_TO_DB'
289
EXPORTING
290
iv_kind        = 'P'
291
it_prop        = lt_prop
292
iv_switch_mode = lv_switch_mode
293
iv_msgguid     = clustkey-msgguid
294
iv_pid         = clustkey-pid
295
iv_vers        = clustkey-vers.
296
ELSE.
297
EXPORT lt_prop FROM lt_prop
298
TO DATABASE sxmsclup(is) FROM wa_clup ID clustkey.
299
ENDIF.
300
ENDIF.
301
>>>>>
IF sy-subrc <> 0.                                         "#EC *
303
   m_syserr_raise 'PERSIST' 'MSGGUID_EXISTING'
304
                  clustkey-msgguid clustkey-pid
305
                  clustkey-vers ''.
306
lv_p1 = clustkey-msgguid.
307
lv_p2 = clustkey-pid.
308
lv_p3 = clustkey-vers.
309
310
RAISE EXCEPTION TYPE cx_xms_syserr_persist
311
EXPORTING id = cx_xms_syserr_persist=>co_id_msgvers_existing
312
p1 = lv_p1
313
p2 = lv_p2
314
p3 = lv_p3.
315
316
ENDIF.
317
318
319
320
table SXMSPRES (resources)
321
table SXMSPXRES (X-resources)
Internal notes
The termination occurred in the function "expOutDb" of the SAP
Basis System, specifically in line 3748 of the module
"//bas/640_REL/src/krn/runt/abexpo.c#8".
The internal operation just processed is "cmpr".
The internal session was started at 20060724051049.
Internal call code.........: " "
Key..................: " "
It is very likely that a constellation similar to the following applies:
Process 1:                               Process 2:
UPDATE x.   ==> NOT_FOUND
UPDATE x. ==> NOT_FOUND
INSERT x.   ==> ok
INSERT x. ==> DUPLICATE KEY
DELETE x.   ==> ok
UPDATE x. ==> NOT FOUND
+ DUMP
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
[0] DoStack2 ( 0x105a4f7c0, 0x0, 0x2d1b000, 0x100000000, 0x1, 0x0 ), at 0x100471a60
[1] CTrcStack2 ( 0x105a4f7c0, 0x0, 0x100000000, 0x2d1ac00, 0x2, 0x102d1ada4 ), at 0x100471610
[2] __1cQrabax_CStackSave6F_v_ ( 0x10303b400, 0x303b400, 0x103874d10, 0x101fcfce8, 0x100000000, 0x
[3] ab_rabax ( 0x1, 0x2d1ac00, 0x0, 0x100000000, 0x3873800, 0x100000000 ), at 0x100a7fa04
[4] __1cIexpOutDb6FppCpLLInJEXPO_MODE__i_ ( 0x2, 0xe82, 0xffffffffffffffff, 0x101f97a90, 0x2, 0x38
[5] __1cTwrite_data_compress6FkpnICONNE_WR_C_i_ ( 0xffffffff7fffb038, 0x1070, 0x1000, 0x10095fa9c,
[6] __1cMab_connwrite6FIIpHIpFp0pIppnHAB_DATA_ppv_ipFppCpLLInJEXPO_MODE__i_i_ ( 0x0, 0x4, 0x10302a
[7] __1cLexpo_export6F_v_ ( 0x0, 0x960000, 0x95f800, 0x0, 0x103847980, 0x1 ), at 0x10095aa20
[8] __1cIab_jexpo6F_v_ ( 0x0, 0x5b52800, 0xd0, 0x100000000, 0x1, 0x0 ), at 0x100952df4
[9] __1cIab_extri6F_i_ ( 0x100000000, 0x5a37800, 0x2f0, 0x1, 0x0, 0x5e ), at 0x10068ccf8
</b></i>

Since HP Update. I can no longer print in black only and draft. Toolbox reports no problems found.

Since HP Update. I can no longer print in black only and draft. Toolbox reports no problems found.

This is a duplicate topic with your other post. I will lock this one, please look here for responses.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

List of Problems with new Web Mail

List of Problems with NEW Web Mail :
- At first doesn't open full page message list or retain full page as default setting, have to drag down bar
- Only shows 20 message lines after “pulling down” the divider, screen partially empty until I scroll down. It should show at least 26, preferably all available
- After moving bar, bar moves back up after going back to inbox (not delete message) after reading a message, have to move it down again, and again...
- Doesn't go to next message when delete message on screen is selected, no setting option for default to do this.
- There is a drop down to select which folder to move a selected email to. The initial display shows 7 usable choices, with the usual slider and arrow to show more choices. The space on the slider clearly shows more choices are present (actually about 20 or so are there), but any attempt to use the slider or arrow to see more choices causes the drop-down to instantly disappear. I can't move the selected field with arrow keys either. I can select any of the visible 7 choices, and move an email to only one of the 7. NOTE: This one works in both IE and Firefox, but if Verizon Webmail was fully web standard (see http://en.wikipedia.org/wiki/Web_standards) compliant it would also work in my preferred browser, Mozilla Seamonkey, the direct descendant of the original Mozilla browser. Webmail should be FULLY web standard.
- Occasionally a message will move from inbox to trash, without NO indication or command to move them.
- Emails occasionally flash an error message and simply disappear - not to trash or other findable place, just disappear. No time to read the error message either.
- No way to set a whitelist for supposed spam emails, unless the whitelist for “Blocking” is the same. Very unclear.
- How can I switch my service back to the original, basic, email which works ok? I know it’s still there, since some of my other accounts still access it!!!
This seems my only way of getting this info direclty to the programming staff. If it doesn't actually do this, will SOMEONE PLEASE FORWARD THIS MESSAGE TO THEM !?!
Thanks!

vz_ric wrote:
The majority of websites are set up the same way for all browsers. It's the software manufacturers responsibility to make their software compatible with websites, not the other way around. Otherwise everyone who has a website will have to make 10 different sites to work multiple browsers.
Contrarily, it is Verizon's, as well as other companies like Verizon whose customer base uses a wide variety of web browsers, web page designers' responsibility to use only standard W3C-recognized code and not to use non-standard non-W3C-recognized code, e.g., Microsoft's Internet Explorer specific code, when designing their web pages. In my opinion based on my observations, Verizon's web page designers are too often guilty of using IE-specific code.

Attachment list printing problem

I am using the Entourage mail program. How does one get the box that lists the file names of attachments to a message to print out as part of the message? I just want to have a printed copy of the list--not the contents of the attachments called out in the list.
For instance, I send out a message with a series of attachments listed in the box below the subject line, but when I print out the message I have sent, the attachments are available when the paper clip is clicked, but are not listed when a copy of the sent message is printed.
Thank you.

Hi Experts,
Could you please let me know,which format has to be selected, my report is exceeding 255 characters.
Z_65_1032         Format for 65-1032 columns
Z_FREE_SIZE      Free size
Formats suitable under certain conditions:
X_PAPER          ABAP/4 list: Default list formattin
X_SPOOLERR       ABAP list: Spooler problem report
X_65_255            ABAP/4 list: At least 65 rows with
X_58_170            ABAP/4 list: At least 58 rows by 17
X_65_132           ABAP list: At least 65 rows by 132
X_90_120           ABAP list: At least 90 rows by 120
X_44_120          ABAP/4 list: At least 44 rows by 12
X_65_80            ABAP/4 list: At least 65 rows by 80
Regards,
IFF

Error in sap crm - List Price not found

Hi all,
I am creating an order for free of charge products that has an item category " free premium item" but when i am trying to create these orders, I get the msg " List Price not found ". however when i create a standard order that has the same item category " free premium item", it gets created without errors and the pricing is there. I looked at the config of both order types the standard order as well as the free of charge order and i also looked at how the item category determination has been configured and then i looked at the pricing procedure configuration. where and what else should i look into to fix the issue?
Thanks in advance,
Preethy
Edited by: preethy on Jan 31, 2008 1:13 AM

HI Muralidhar,
I looked at the note 528161 but does this apply to CRM also? I did not see a table called VKP2 or WVKP in CRM. the note mentioned these tables
Thanks,
Preethy

Long list of problems I had, culminating in iPhone no longer powering on.

So, let me start off by saying, there is no Apple Store available save by taking a plane to another island.
Anyway, awhile back when I updated my phone to a new version (I don't remember which), a bunch of things started happening.
1. No WiFi, it was grayed out, and inaccessible.
2. Would not ring if someone called me while the phone was on standby, except sometimes if it was plugged in and charging.
3. Calls would sporadically fail, and signal strength would alternate between full bars to none, to showing "No Service", and sometimes would show "No Sim". I could usually (not always) get service or signal strength back by toggling airplane mode on or off, but the only way to get rid of "No Sim" was to power it on and off.
4. Clock would always show the wrong time. It would seemingly stick at say... 3:40.. even though it was 6:00, then suddenly before my eyes jump forward 2 hours to the right time or still a bit behind. This also caused the alarm functions to not work, because it would usually skip over the time it was supposed to go off.
5. Error messages would occasionally flash on the screen, but disappear so quickly as to be nearly unreadable, sometimes saying "Please connect to iTunes" but it hadn't done that one in awhile.
6. A general sluggishness at times, also weird delays on sounds or none at all. I.E. I'd take off standby (wouldn't make swish sound), start to type a text message, only there'd be no sound while typing, but then 30 seconds later it'd make the swish sound it normally makes as you take it off standby, and resume clicking when typing.
Restoring it through iTunes would not help at all.
Anyway, so today, I tried restoring it like 6 times in a row out of pure frustration, and it like got stuck in recovery mode while rebooting, and when iTunes was restarting it, it just turned off.
The iPhone will no longer turn on, even when plugging it in to my computer or to the outlet charger, no matter if I hold power or home button or both.
Update: I just got it to power on again, about an hour after I was last trying fruitlessly. I restored it again, so it's "working" albeit with the long list of problems above still.
Message was edited by: Dryesias
Message was edited by: Dryesias

If you regularly sync your iPhone, you won't lose ANY info when restoring.
iTunes creates and maintains a backup of your iPhone - which is updated if needed as the very first step during the sync process. The backup stores all your iPhone settings, SMS messages, notes created with the Notes application, recent calls, call favorites, visual voicemail messages, and photos captured by your iPhone - basically all data stored on your iPhone not included with the sync process.
Your iPhone has not died - not yet, but it has developed a problem which requires a Restore.
It isn't required to have an Apple Store near you. This can be handled over the phone by calling AppleCare (800) 694-7466, but I venture to say that AppleCare will try to troubleshoot the problem over the phone before having your iPhone picked up for inspection and testing, which will very likely include a Restore just as the error message provided indicates. You can do it now, which will probably resolve the problem, or wait and do it when calling AppleCare.

Can anyone explain why I cannot restart my computer after apple hardware test with no problem found

Can any body help
when starting computer apple hardware test appears
following test, no problem found but cannot restart computer
apple hardware test appears again
How can i skip apple hardware test?

Have you read for possible solutions over in the "More Like This" thread over here?----------------------->

Problem found: The Diagnostics Policy Service is not running

Whenever I attempt to run network diagnostics Windows 7 Ultimate response with Problem
found: The Diagnostics Policy Service is not running. <o:p></o:p>
I usually find my own solution to the network problem. However, not to the inability to run
diagnostics. In addition, in my attempt to find a solution, the Diagnostic
Policy Service Properties has become corrupted. The run under this account information
is not valid.
So I basically need the account and password for the service. In addition, once I have that info properly
inserted, I need a way to get the diagnostics to actually run.

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
Since your post is off-topic, I am moving it to the
off topic forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

HT201257 I just bought an imac in september 2012. And i just find out that my microphone is not working. So i did an apple hardware test and with no problems found? I have sound but no one can hear me, not even the computer. Should i bring it back to

I just bought an imac in september 2012. And i just find out that my microphone is not working. So i did an apple hardware test and with no problems found? I have sound but no one can hear me, not even the computer. Should i bring it back to the store

Before you go through that trouble open About this Mac > More Info... > System Report > Audio and see if the system actually knows it has a microphone. Then you can look into Applications > Utilities > Audio MIDI Setup and see if the microphone is there, select it and make sure the sliders are set to full. Then in System Preferences look for Sound > Input and make sure it shows up there and the sliders are at least half way up. If none of that works do a
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
It is the 5 second timing that initiates the reset.
then go through the process of looking for the microphone again as the reset may reenable the mic.

A strange problem found with the JCombobox???

Hi All,
A strange problem found with the JCombobox, its arrow button does not recognise any events (Mouse,Focus,Action ets.)
My intention is when ever user clicks on the JCombox's arrow button load it with some values dynamically?
I have tried it by initializing with values it still does not workl.
I could solve this in JDK1.4 by using popupListner but I want it to work in JDK1.3.1_09.
Any ideas on this would be great help..

i don't really quite sure about my understanding about load dinamically...do you mean that you want to add value to combo box?and the first value will stay and never disappear?...well i haven't try that but...may be one of my suggestions work for you...
but try these posibilities:
1. look in the help docs...for JComboBox...find setEditable() method...try to use this method.
2.look in the same page as 1...try to use append() method or add() method...i forgot about this...hehe...but the point is, find a method to add value to the JComboBox...
sometimes, you have to set your combo to be editable before you're able to do something on it...but just try with or without that method...
3.about the listener...mmm...have you add the combobox object to the listener you use?

The new version of iTunes does not recognize my Ipod-prior to this version, had no problem, Ipod showed up as list under the Imac library. Now getting synch must erase setting! Help

The new version of iTunes does not recognize my Ipod-prior to this version, had no problem, Ipod showed up as list under the Imac library. Now getting synch must erase setting! Help

well nobody bothered to give me a hint on what to do, maybe because the problems with the new version of iTunes are really a lot, there is an enormous amount of people out there that have all sort of different problems including mine so I have decided to return to the previous version which works fine and wait untill the apple people come up with a decent product ....

When say opening my mail box a new pages opens to a site not where I selected to go have run anitvirus scans with no problems found any ideas.

When opening my email a new page opens in my browser it may be just a normal site or my WOT warns of danger. If I X the new browser and go back to my email all is normal until I ask for the email again a a later time. Have run numerous virus scans and superantispyware scans with no problems found. also when opening a google search when I click on a site a new google search opens with the same search information.

It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
If that's not the page you are having trouble with, what is that page's URL?

TS1286 At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found" My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?

At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found" My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?

I think my problem is fixed now.
For the fun of it, I reinstalled iTunes 9.2.1 today (using the exact same installer as I did yesterday), but this time I didn't uninstall iTunes first. As expected, iTunes recognized my iPhone (as I expected it to, until my next reboot).
A few minutes later, Software Update showed up and among the updates is "iPhone SDK Compatibility Update". The description indicates that installing this should fix an issue where iPhones and iPod touches aren't recognized by iTunes. Isn't that interesting?
I installed that update and most of the others waiting for me (including Java, Safari 5.0.1, and a few others - not 10.6.4 though, due to the issues with nVidia graphics cards). After the reboot, I started iTunes, and it saw my iPhone!
So, if you're having this same problem, I'd recommend tracking down this update and see if that does the trick for you. Hopefully it will.

N96 - My list of problems found - up to now!

Similar Messages

Maybe you are looking for