N96 No Message Sounds after update to 12.043

I've recently updated my phones firmware to 12.043, impressed how much more resposive the phone is.
However I now have an issue when I get a new text message the phone does not make any sound.
I have checked the profile is on general and that the message tone is set.
I can play the message file when selecting the tone, but it doesn't play when i get a message.
Any ideas?

Have you tried a restore factory default settings?
It won't delete any data of yours, it'll just mean you have to redo your profile, ringtone, theme etc. settings again afterwards.
Enter *#7780# from the standby screen and provide your security code when prompted. It'll be the default 12345 unless you've changed it.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

  • Multiple message sounds after updating iOS 5

    After updating my iphone 4 to iOS 5, Whenever i get a msg or a notification, the tri-tone message sound is played about 3 times. Am i the only one?

    If you mean that the tri-tone sound is repeated with intervals of two minutes: When you go to Settings -> Notifications -> Messages, near the bottom you can choose how often a message alert must be repeated. This can be set to never.

  • Distorted sound after updating from iTunes 10.4 to 10.5 in Win XP SP3

    After the latest Apple update,I have  istorted sound after updating from iTunes 10.4 to 10.5 in Win XP SP3.
    But it plays normally sounds coming from my connected iPod or any internet radio station !!
    If I add any song to a playlist, it turns out to be just noise!
    Any clue ?
    Thanks for any help !
    LAO

    I recieved the same message. Have you found a fix to this?
    If not, read my issue because I belive we have the same
    https://discussions.apple.com/thread/3442836
    It would be nice to work this out with another person.

  • HT4623 My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine

    My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine. Please help me out, done all the troubleshooting like restarting, side switcing, cleeaning the headphone jack etc.,

    Hi I also have this problem. Sound was only working on the headphones and also on the volume slider in the settings app. Everywhere else I get no sound and no volume slider. Now the headphones don't work either.
    (I'm using an ipad 2 iOS 6.1.2) 
    And NO it's not muted. I've reset all settings and restarted the iPad. Been searching forums for a couple days. Some say its a dirty docking port problem, others suggest a Skype or other app update that could be the problem.
    No volume control icon appears when I press the volume control buttons. Only says sound effects, if it says anything at all. Most often there is NO volume icon. YouTube, video, music, and other game apps, no sound.

  • Poor sound after updating to ISO 7

    Poor sound after updating to ISO 7. Before updating i had terrific sound both on my music and videos I recorded with my cam, i had to turn it down. Now, after update, i put volym on Max and can hardly hear the music or whatever. Anyone else with same problem?

    I also loved my iphone because it HAD great sound.  Since the update of the iso7 for my iphone 4s, i am missing my calls because I cannot hear the phone ringing.  The sound is so low even though I have it on the highest sound possible.  The is something in the update that caused this problem among others such as the phone blinking out while I am viewing videos.  Help Apple!  THe battery is going from 100 percent to 20 percent in two hours even when I have almost turned off everything on my iphone.  I need my sound back!  Apple please find out what happened in your update that caused the loss of the sound!

  • Why my iPad mini 2 no sound after updated to iOS8

    Why my iPad mini with retina display no sound after updated to iOS8

    I solved for my ipad mini retina:
    - Go to Settings->General
    - Change the function of the slider on the side of the ipad from 'rotation lock' to 'sound off'
    - Wiggle the slider up and down
    - Sound is restored
    - You can set the slider back to rotation lock again

  • Lost sound after update to 10.7.3 my recent mbp i7 ivybridge 13.3 mid 2012

    please help me quickly ...i lost sound after update to 10.7.5my recent mbp i7 ivybridge 13.3 mid 2012
    i also tried re installing 10.7.3  and finally 10.8 also lost sound
    but when i boot to windows 7 the sound works fine in windows and dissappear again in mac os
    what can i do ???????
    macbook pro core i7 ivybridge 13.3 mid 2012

    The service centre told me it will need changing the logic board

  • Problem with sound after update

    Hello
    After update to 11.3 I have no bass sound in subwoofer in Firefox browser (youtube). I uninstall the newest version and install previous (11.2) and bass plays ok.
    My os: Windows 7 x64. Sound card Creative X-fi.

    Hello!
    My problem is summed up in this topic.
    Updated Flash Player with 11.3 this morning (june 12th 2012) and since then my 7.1 Sound System works only 2.1. If i enable EAX Effects, works on 7.1 but since it`s just a room it sounds very odd.
    I have no problem with sound on HTML 5 websites for that matter, Winamp, Video Players, games.
    Uninstalled Flash Player, sounds work ok without it on different browsers, other than Chrome (since it has FP built in).
    I hope for a sollution soon.
    Thank you.
    *edit*
    Untill there is a permanent solution, i found a way to deal with my issue and i hope it will help others.
    I personally use Chrome and this is for this browser:
    1. Type "about:plugins" w/o the quotation in the navigation bar.
    2. On the upper right u will see "Details" click it then find the word "flash", and you will see something like this:
    Flash (3 files) - Version: 11,3,300,257
    Shockwave Flash 11.3 r300
    Name: Shockwave Flash
    Description: Shockwave Flash 11.3 r300
    Version: 11,3,300,257
    3. I say again, this worked for me on Chrome. The 3 files i have, two of them are Version 11,3,300,257 and one is 11.2.31.144
    4. Simply disable the lates version 11.3 and enable the previous version 11.2
    I hope this helps.
    Message was edited by: AndrewPAM

  • No sound after updating to 10.7.3 - no boot camp available

    All sounds gone after updating to 10.7.3
    tried to reset NVRAM + PRAM via pressing (cmd)+(alt)+(p)+(r) while starting - this was not helping.
    Found also the thread below, but i have no boot camp available
    https://discussions.apple.com/message/17477460
    All ideas welcome----

    You should correct the model of mac, cannot be PowerBook, perhaps MacBook or MacBook Pro.
    I have read that many people have had problems after last update, here all is fine. The only idea I have is to download from Apple site the combo update (the bigger update), and re-run it. This often solves issues.
    As about BC, can you see that partition in Disk Utility? If yes, open Finder preferences, do setttings look like here?

  • No keypad sound after update the software into 10.3.1.1565

    Hi guys..please help me. I'm using Z10, after update the software into 10.3.1.1565, there is no sound of the keypad, eventhough i have made the volume of the keypad sound to the maximum.
    Is anyone has any idea or suggestion about it? Thank you.

    Lots of users are complaining about issues with Contacts from OS 10.3.1 udpdate (Q10 v5).
    I've tried everything under the sun (reinstalled OS multiple times, completely wiped my device, etc) and the problems still persist.
    I've noticed that if I repeatedly disable and re-enable Contact syncing via Settings (and then waiting an hour or two), the Contacts will eventually appear after about 5-10 attempts, and my text messages and phone calls will show names again.
    BUT, as soon as my Q10 soft resets for any reason (if battery dies, for example), all of my main Contacts completely disappear. Then I have to repeat the steps above every time.
    There are a few other things I've noticed:
    1) If I click "Edit Contact Folder Settings" button in Account Settings, it shows Contacts, LinkedIn AND "LinkedIn 2". I don't even have LinkedIn installed!
    2) If I turn OFF the toggle switch to "Sync All Contact Folders" then click save, it doesn't actually save my settings (usually if something saves successfully, the devices seems to think for a few seconds, which doesn't happen). As soon as I go back to manually edit the Contact folders, the settings are reverted back to All Contacts.
    So frustrating..

  • Exception processing message 0xc0000013 after updating itunes and Quicktime

    After updating itunes and Quicktime, every time I remove a CD from my DVD drives I get an error saying no disk exception processing message 0xc0000013 Parameters 0x759f023c 0x87f51934 0x759f023c 0x759f023c.
    I tried doing a restore to a time before that update and that didn't seem to help. It just gave me different parameters.
    I'm using Windows Vista and this is driving me nuts.
    Any help would be greatly appreciated.

    I also have the same problems as you guys after installing Corel Painshop Pro X12. I went into the task list and stop the CorelIOMonitor process and then the problem went away. I found out that you can disable this from starting up using System Configuration tool via Start -> Run -> msconfig
    . It's an interm solution untell they fix it. Maybe someone needs to notify Corel or Apple to fix this problem.

  • I have no sound after updating to iOS 6.1.3

    After updating I lost sound. Tried restoring and still no sound. Guess I'll have to get a new phone...any other suggestions?

    Check out my post I spent 15 hours fixing it when my iPad 2 on iOS 6.1.3 volume disappeared.
    https://discussions.apple.com/thread/5075175

  • No windows sound after updating the IDT High definition Codec!! HELP!!!

    Hi all
    I really need ur help now
    I have updated IDT High Definitio Audio Codec several days ago
    after i reboot my notebook, I couldn't hear my windows sound anymore
    than i reboot till 2 times, n the windows sounds was heard again
    However, after I turn it on the next day, i found that i have no windows sounds again
    but i can play media players, such as winamp, n could hear msn sound
    After i reboot my PC, the sound was heard. But after turning it on for the 2nd times, i couldn't hear the windows sound again!!!
    Help me please
    How could I fix this?
    I have rollback driver, but i doesn't work. Coz before updating IDT audio by windows update, I have updated IDT audio through HP support assistant
    N i am a little bit afraid of doing system restore...
    PLEASE HELP ME
    THX

    Hi,
    Download correct audio driver.
    How to find it on HP sites?
    1. Click on Support & Drivers link. (Upper part of this page.)
    2. Choose option: Download drivers and software (and firmware)
    3. In form:
           Enter a product name / number
           For product provide Your p/n. (How to find correct p/n informations here.)
    4. Click on Go and choose system which You are using now.
    Disconnect from Internet.
    Uninstall from Your system IDT audio drivers.
    Resources:
    Uninstalling Software in Windows 7
    Uninstall or change a program in Windows 7
    Restart Your system:
    On boot press ' F8 ' and choose ' Safe mode '.
    Go to Control Panel -> Devices Manager -> Audio, Video and Games Controllers 
    and find there Audio card. Click on it with right button of Your mouse and choose uninstall driver.
    Restart Your system and this time start it in normally.
    Install this driver which You downloaded.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Problem with sound after updating to ios 7.0.6

    Help!
    No sound whatsoever from the speaker after updating to ios 7.0.6.
    Sound from earplugs & through dock OK.
    I tried everything I found on the web, but nothing worked up till now.
    Tips, anybody?

    Hi singsingsarah,
    Thanks for visiting Apple Support Communities.
    Be sure to try all of these steps if you do not hear sound from your iPhone speakers:
    If you do not hear sound from the built in speaker, try these steps:
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
    You can find the article with these steps here:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Best,
    Jeremy

  • I DO NOT SOUND AFTER UPDATE OF WINDOWS 8.1 UPDATE

    HI IM HAVING PROBLEMS WITH THE SOUND ON MY COMPUTER AFTER UPDATING WINDOWS 8.1 CAN U PLEASE ASSIST ME

    Hi,
    Can you post back with the full Model No. and Product No. of your notebook - see Here for a guide on locating this information.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for

  • Report on inventory purchased for a period from a vendor

    I am looking for a report which shows the inventory of a raw material purchased from a vendor for a particular period. Is there any standard report ?

  • Convert created idoc to an output text file

    Hi, How can i convert an idoc to an output text file? is there a standard program in SAP that does this? Thanks, Tots

  • WSUS not Downloading 2012 r2 patches

    The issue I seem to have in a prod environment  (WSUS on 2012r2) is, I get all server 2008 patches no issue, but the server 2012 patches, they aren't even being down loaded, I can retrieve the list from MS directly from the windows update panel. But

  • Are the Yellow banding iMac problems fixed?

    I read the posts about the iMac screen flickering, tearing, and having yellow bands on it. I haven't been able to find anything though that says the problem has been resolved. Are the iMacs safe to buy now? Thanks

  • Isight use with Safari

    I am trying to use my iSight with a web based web chat system. I can not get the iSight to turn on and send a video signal. I have no problem with my DV camera and Safari and the iSight even works (although with poor image quality) on my Widows XP bo