N96 OTA Update

I have an original N96, never been upgraded.  I haven't had any major problems with the phone (quite a few minor ones) and wanted to wait for a few Firmware updates, before I took the plunge and updated.  I just did a OTA check and my phone did download an update.
I of course intend to make a full backup before running the update, but just wanted to check if anyone else has done an OTA update and whether they lost any information or data off their phone.  Just to give me an idea of the time I will have to spend getting things back to the way they were....
Cheers
There are 10 types of people in the world. Those who understand binary and those who don't.
Solved!
Go to Solution.

I have done 3 OTA updates on my N96 and they all worked seamlessly with no loss of data whatsoever.
However, you should still take all the necessary precautions and do all the backups. We don't want to tempt Murphy's Law.
OTA is the only way to go and I am sure you will agree once you've tried it.
Good Luck with the update.

Similar Messages

  • When Updating N96: OTA or NSU ?

    Do you guy, or do you Nokia recommend using OTA or NSU when updating my N96? I have never tried OTA before, always used NSU however I see that many people uses OTA now.
    Any suggestions, or concerns regarding OTA or NSU?
    Thanks

    miamicx4 wrote:
    I called the Nokia Car Phone Line, they told me they recommend NSU. They say it is safe to use OTA, but NSU is the best way.
    They say what OTA does is that it just "upgrades" some of the existing firmware's files. That is why OTA's faster and the dowload files are smaller. NSU however formats the phone and "freshly installs" the whole new firmware on phone from scratch.
    Could you guys do me a favor and call the Nokia Care Phone Line for yourselves and see what they tell you?
    NSU reinstalls a complete new copy of the OS, which is often +/- 120Mb for the top Nseries models. OTA updates act as a patch, only replacing the elements that have changed. This is because the system works over WLAN or network connections, so downloading the full OS could be costly if you don't have WLAN access.
    You don't get any less of an update with OTA, you just download only the changed parts and not the whole thing.

  • HP Slate 21 Kit Kat OTA Update Fix for Audio Quality and LAN Connectivity

    Recent Over The Air (OTA) update for Slate 21 Update
    Link to thread discussion here, fix listed below -
    ISSUE: 
    A previously applied HP Slate 21 Kit Kat Update (Android 4.4.2) over the air (OTA) update may have caused issues with audio quality or wireless LAN connectivity.
    Audio Quality: Bass response will be poor. Audio will play but bass frequencies will be lacking.
    WiFi Issue: 5 GHz band not functioning properly
    Status: 
    A new update (17r25.1-011-11-WW) has been released over the air (OTA) to end users
    Resolution:
    Apply update 17r25.1-011-11-WW
    If the user was previously on 17r25.1-010-10-WW then a Factory Reset should be performed to complete the resolution.
    I work for HP, supporting the HP Experts who volunteer their time and technical knowledge to help others.

    Pebbles65,
    Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
    English: http://h30434.www3.hp.com
    Spanish: http://h30467.www3.hp.com
    French: http://h30478.www3.hp.com
    Portuguese: http://h30487.www3.hp.com
    German: http://h30492.www3.hp.com
    Korean: http://h30491.www3.hp.com/t5/community/communitypage
    Simplified Chinese: http://h30471.www3.hp.com/t5/community/communitypage
    Cheers,
    KarolB
    I work for HP

  • IPad fails to connect to WiFi after OTA update to iOS 6

    After the OTA update to iOS 6 my new iPad fails to connect to my WiFi network at home. My LANCOM router reports the following issue:
    Index: 62294
    Zeit: 19.09.2012 21:08:28
    Interface: WLAN-1
    Ereignis: Rejected Association from WLAN station xx:xx:xx:xx:xx:xx []: ()
    Adresse: xxxxxxxxxxxx
    Grund: Cannot support all requested capabilities in Capability Information field
    It has worked flawlessly in the past with iOS 5 on my new iPad and iPhone 4. At the moment I hestitate to update my iPhone too.
    Anyone with the same issue or an idea how to fix it?
    Thanks in advance, greetings from Stuttgart (Germany),
    Jens

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Lenovo s820 OTA Update error (From S820_ROW_S222_141121 to S820_ROW_S223_150119)

    Hi,
    I also having problem in OTA updation (10.89MB) recently triggered. (I am using Android Kitkat version 4.4.2) while I tried to upgrade the it down loaded properly without any issue.
    Then I pressed upgrade now, then my mobile restarted and shown some upgrading screen....but suddenly a error show n and stopped.
    then I rebooted and pop up says that the OTA upgrade failed!!!.
    Someboday pls. help me to fix this.
    I also did factory default setting.
    Note : Pls. check the error message in attached picture.
    (Installing Update....
    Verifying current system...
    "/system/priv-app/settings.apk" has unexpected contents.
    Update.Zip is not correct
    Installation aborted.)

    I have the same issue with S820_ROW_S222_141121 except my installation halted on "/system/priv-app/ideaFriend.apk"
    Please help.
    The updates kept coming but I could never installed them.
    I have tried OTA as well as from my own PC. Won't WORK!

  • Ios 5.1 OTA update gives error message ( unable to check for update - an error occured while checking for a sofware update ), can anyone help ?

    i am trying to download the latest ios 5.1 but the OTA update gives me a error message ( unable to check for update - an error occured while checking for a sofware update )
    the same thing happens in my ipad too.

    Thank you! I've been trying all day to get this to work! and finally i found the answer!
    amensistech wrote:
    I found a fix for this.
    Go to Wifi    Settings and then select your Wifi Network. Tap the blue arrow to go into Wifi settings and then select the DNS tab.
    Set the DNS to 8.8.8.8 and then go back to the software update page.
    This time it shall work.
    I tried it on an iPad 1 running iOS 5.0.1 but I am sure this shall help.
    Do rate me and reply if it works.

  • Have a lead on the OTA update problems!

    FIRST, THANK YOU! THANK YOU! THANK YOU!... Whoever is responsible for FINALLY giving us our own discussion space!!!!
    I am only going to post this here rather than try to update all the postings regarding the OTA update issues.  I hope people will find their way to it!
    I experienced rapid battery drain, severe overheating & endless boot-looping after the OTA update (among other more minor problems posted in the main Android forum). I had to factory reset and have been trying to determine what the problem might be. I have had discussion with VZW & HTC about this problem.
    After leaving my phone as a stock out of the box phone with the update for a week, I started adding back my Apps. Eventually I had the same problem.  I factory reset my phone and installed each App 1 at a time.
    I discovered that WeatherBug Elite is causing major problems on the HTC Rezound post OTA firmware update. The HTC Rezound has 3 location services - Verizon Location Services, Standalone GPS and Google Location Services.  The default is for only the GPS and Google services to be turned on. If the WeatherBug city is set to Current Location and Verizon Location Services is turned off then the device battery will rapidly drain.  It will also SEVERELY OVERHEAT (130 degrees+) & eventually begin endless boot-looping.  At this point the phone has to be factory reset.
    If Verizon Location Services are turned on then setting the city for Current Location does not cause this problem.  If you turn Verizon Location Services off after the Current Location has been set then it is OK until you change locations and it has to update. Then its back to severely overheating and eventually endless boot-looping.
    This does not happen on the free version of WeatherBug.
    Verizon included a new process - Verizon Location Agent in the OTA update.  This must have something to do with the problem.   All my other Apps that use a Current Location setting do not have this problem.  I suspect that there may be other older Apps with a Current Location setting that might cause this same problem. This has been causing much stress and problems for HTC, Verizon and their customers.  People have been going thru multiple phones thinking that it is a problem with the phone but it continues to happen.  HTC and Verizon have acknowledged that there is some problem with the update and they are now investigating it but really didn't have a lead on what it might be since only some customers were experiencing these problems.
    I spent 14 hours diagnosing and trouble-shooting the problem all last night.  You have to put the phone to sleep & wait long enough for WiFi & the GPRS data to be turned off.  When you wake the phone & wait for 'No Service' on the lock screen to change to 'Verizon Wireless' then it will immediately start the endless uncontrollable boot-looping. It will also happen if you restart the phone.  I have done this on a factory reset phone with the OTA update installing one App at a time and WeatherBug Elite was the only one that caused the problem.  I do not know if this is true for 4G-LTE as I am not in a 4G-LTE area and keep it turned off.
    I wanted to pass along this information I discovered.  I hope I am remembering all the steps. I had it doing it every time. I did more factory resets last night than you could believe.  You need to see the "No Service" on the lock screen when you wake up your phone. This has something to do with it also. I'm so tired now that I can't see straight.  I'll recheck this after I've had a nap.

    Because some people have problems with the updates and some don't, I've often wondered if it had to do with specific apps that some have on their phones and others don't. I never had any problems with my Thunderbolt updates. This one for the Rezound isn't a problem either, but I essentially have the same apps on it that I did on the Bolt. I've never cared for Weatherbug ever since they originally came out on the PC and I got buried in spam. If you haven't tried it yet, you might also try "Weather, Radar, Alerts, Quakes by Elecont software. It's the best weather app I've found and has never given me any problems. I tried BeWeather and didn't like it as well.
    https://market.android.com/details?id=com.Elecont.WeatherClock&feature=search_result#?t=W251bGwsMSwxLDEsImNvbS5FbGVjb250LldlYXRoZXJDbG9jayJdhttp://
    What you're doing by eliminating them one at a time is time consuming, but the best route. There may still be something wrong with the phone itself. I've never had a problem with the boot looping. Also, mine gets up to around 120 to 125 degrees if I'm charging it while using it heavily for streaming videos/movies, but I've never hit the 130's like you have. I did have the led's flash red/green at me at about 125. I also haven't had any of the other problems you seem to be having, so I can't be much help other than to let you know that there are Rezounds that don't have all of those frustrating, headache causing problems.
    I've lost track in your posts, so forgive me for asking the obvious, but have you exchanged it for a CLN replacement(s) and tried new batteries? Are you still using a standard battery, or an extended? The extended batteries don't seem to be having the overheating problems that the standard batteries are, but if you have a bad phone, it may not make much difference.
    Sorry about the problems and frustration

  • Problem with B6000-H OTA update

    Hi, I have a problem with my Lenovo YOGA 8, after an OTA update, it restart but stay still with Lenovo logo. Tryed wipe cache, wipe data factory default but nothing. Someone can help me to find the original rom to try flashing by recovery?
    Thanks!
    Moderator Note; subject edited on this and further posts

    Try this link at your risk:
    http://lenovo-forums.ru/files/file/428-rom-yoga-8-​b6000-a422-000-059-131219-ww-wifi/

  • Ota update in saudi arabia for 5800xm

    when it will be available, ota update for nokia 5800xm here in saudi arabia?

    Mobily version is not out yet. But its coming soon as you can see below so you'll have to wait
    Attachments:
    Capture.JPG ‏32 KB

  • Froyo OTA Update broke my Exchange Account!

    I received the "official" OTA update last night for my Droid and installed it this morning.  My corporate exchange account worked wonderfully before the installation and has been since I got the phone on it's release date.  After the installation, it's broken.  I've tried deleting the account and re-entering it and just get a message that advises that it's unable to connect to the server. 
    I've found that this has happened to many who have used the FRG01B update that VZW rolled out.  Anyone hear of a solution to this problem?  VZW, is there any plan to fix this bug?  I need my email and calendar back!!!  It's part of the reason I got this phone in the first place!

    first, let me tell you about my "registering on these forums" experience.  I tried over and over and it would not let me register.  silly little errors like, "your registration cannot be completed, try again later."
    Nonetheless, I have seen a few postings about how Froyo hoses Exchange(Corporate)e mail and I wanted to talk about why it is happening.   I was finally able to register from within my myverizon account, I could not do it any other way.  Also, got a page cannot be displayed error when I tried to click the support  site for the community/blog.
    Anyway, the solution:
    It looks like Froyo is forcing the use of a certificate on your Exchange portal.  It really is that simple.  Your Exchange Admin just needs to put a cert on the portal and then enable SSL.  That is all it takes, then on your phone, select to use SSL and Accept all Certs in the Inbound Accounts settings.  For some reason, corporate mail does not work without SSL, even if you uncheck the box.
    Most people won't have this problem since they probably already have a cert on the mailserver portal.

  • OTA update despite formerly open bootloader?

    Hi there,
    some time ago I had my boot loader unlocked. But I locked it again with flash tool. Currently I use a pre rooted Lollipop I installed via recovery.
    What I find strange is, I get a message about a system update and I get this message via OTA!?
    Is it possible you are offered OTA updates, althought once the boot loades was unlocked!?
    Has SONY changed its policy regarding OTA updates once the BL was unlocked (and may be locked again)?
    Thanks
    Solved!
    Go to Solution.

    Unlocked or not you would still receive the notification - However that's not to say it will work as it would normally say something like Modified software detected and thus fail to proceed to update
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

  • OTA update for iPad1

    Can you update the iPad1 to iOS5 OTA and if so, where do you start?  I can't find "software update" in "Settings".

    OTA Updating is a feature of iOS 5.
    Getting upgraded TO iOS 5, however, you have to connect it to iTunes like all previous updates.

  • OTA UPDATE when ROOTED?

    Greetings to all,
    Before my question, I am currently running at this specification:
    Model C903
    Android version : 4.2.2
    Firmware : xxxxx .257
    Rooted? : YES
    No CWM installed. Stock kernel and Rom.
    I would like to ask if it's okay to update OTA while I'm rooted? the reason I didn't update before is because I might lose my game data/progress if I was just going to flash a fresh stock ROM, update and root - restore the game data using TBP.
    I once experienced it that restoring app data from different android version isn't possible, got nothing to do but stopped playing that game.
    Now, i guess my software version is really outdated so I am asking here for some help.I am thinking that updating OTA will best ensure my game data but i do not know if there's any side effect in updating OTA while being rooted because I cannot afford to re-flash a fresh FW atm.
    Thank you in advance.

    My Z1 was rooted when i get it new (T-mobile branded).
    If you update OTA then your Android device will be unrooted.
    If you want to have a uptodate rooted Android, then disable ota updates, and check if their is a updated rom that is rooted or that can be rooted, and use rom manager to flash that. (keep in mind to be sure you use the right rom, otherwise you brick your Android device).
    ∆○×□ PSP1004 (Phat 1st gen.) 5.00 M33-6 (+1.50) + 32GB Pro-Duo.
    ∆○×□ PS4 1.7X + 500GB hdd + Dualshock4 + PS4 Camera,
    Xperia-Z1 Android 4.4.X + 32GB microSD + Philips SHB9100

  • OTA Update for Thunderbolt

    I've read posts here and talked to techs saying that the OTA update is supposed to be today and well it's today so is it delayed? Just wondering I've checked a few times and it says no new software available. Anyone have an idea of when?

    Tboltaz wrote:
    AZSALUKI wrote:
    nobody knows, but it's not today and nobody knows when. the only way to know when we will get the update is when you look at the phone and it says there's an update available. 
    Well the page below should be updated before OTA actually starts rolling out.
    http://support.vzw.com/system_update/thunderbolt.html
    yeah......and when i signed up for email alerts for the tbolt you would've thought i would have recieved an email prior to it actually being on the shelves. i doubt that page will be updated until they've already started pushing it. and even if it is, it's easier to check your phone for available updates, than to check the site every morning. i just find it easier (and less frustrating) to wait until i see everyone on the forum talking about actually recieving the update, than to count on verizon to actually clue us in....or even know themselves, when it will happen. heck, they advertised this phone in the best buy ads and ran tv commercials for it for a month before they even knew when they would release it....lol.

  • OTA update messes up Incredible

    We have three DINCs.  One of them got an OTA update on Sunday morning (1/3/11) that has messed up the phone.  It has the following issues:
    1) Many apps act as if they are being opened for the first time, EACH time they are opened, IF they open.
    2) Majority apps won't open, FORCE CLOSE.
    3) Handscent sends messages from the previous day when you power off and back on again, i.e. they seem to be stuck in the queue.
    Recommendations for next steps?
    Thanks in advance.

    My first choice is a battery pull, but I doubt that will correct it. But all three of your devices are showing the same thing. So I suspect a corrupt OTA download. 
    I would say to next do a master reset, but if you have time for just one phone, delete the apps and reinstall and see if that clears up the issue.

Maybe you are looking for

  • RFC return table

    Hi, I have created RFC function module with import, export and return parameters. How can we display multiple error messages in Return table. I am getting only one error message in return table. Can you please reply for this. as I need to deliver it

  • How to create multiple channels in DAQmx

    Hello , I created an application based from this example program, MultiFunctionSyncAIAO_DigStart (from VCNet). I added another input and output channels, which later on I plan to add trigger features between the two signals ( could be both inputs, bo

  • Has anyone ever had an iphone delivered damaged?

    if i phone them up and say the iphone4 came with a small dent in the phone - will they believe me? im telling the truth ofcourse.. anyone had to send one back for refund before? i had it delivered thursday - of course they may ask why have you taken

  • Price Condition control

    Hi, I use two kinds of discounts in one pricing pro., one is based on quantity(Caculation type), another is fixed amount, but if over deliveried, I find the second condition(fixed amount) also changed according to actual quantity, how can I avoid it?

  • How to make webpages fresh?

    my webpage is dynamiclly(jsp page), but computer will save the file to temp folder, and when the user access the page, it will not show fresh data to user, except the user click "refresh" button. how do I make it real dynamic? whenever user access th