N96-phone recovery-PLS HELP--URGENT

im geting the error in nokia software updater:-
remove the battery and charger,
insert battery and charger,
click retry
power on.
what should i do?
after trying this, i still get the error!
help pls
What's Worth Doing, Is Worth Doing Well!
All "N-series" are incredible!

You better keep truing as instructed. you you completely exit the update program you wont be able to recovr your nokia anymore.
IVOR you shouldn't advise people who's update went wrong to disconnect it and reinstall the program! This way they will never be able to recover the Phone.
I just updated my n96 and it went wrong too. the only thing the phone did when i turned it on was flashing with the back light and back off again and again. The only way you can fix your faulty update is to do exactly as told in the software.
First put back in the USB cable then the battery and then the charger. then press the on/off button for 1 sec. then retry on the program
If you do this right you wont see anything happen to your phone.. it stays black and wont start up. on your computer screen you wont see that the phone has been reconnected. But now the update bar of the nokia updater will go on. and finish the update and try to recover the phone. When its finished the phone will start up and go into test mode. after the test is complete it will startup.
I once had the problem that the telephone hang on test mode and it still was after 10 minutes. if this happens pull out the usb cable and instantly put it back in. this way the usb will be reconnected to your computer and the phone will finish the test.
NEVER I SAY NEVER ! force quit the update program when the phone is off and the update has failed. As the phone is still in the standby menu while updating then there is not much that can happen. for it has not began updating yet.

Similar Messages

HT4993 I have an iphone5 and i forgot my password my carrier is sprint. i do i reset phone i have added the wrong code so many times the screens reads : phone disable" pls help

i need help i cant remeber my password and i have tried so my times.The front screen reads " phone disable" pls help my carrier is sprint

iOS: Forgotten passcode or device disabled after entering wrong ...

HT1267 I lost my Iphone3G. I don't have any tracking app. in cell.How can I find my phone. Pls. help me out..

I lost my Iphone3G. I don't have any tracking app. in cell.How can I find my phone. Pls. help me out..

In your situation as you describe it, all you can do is physically look for it. There is no other way to locate it. Sorry.
Hope this helps

File to File Scenario with Secure Connection. Pls help urgent

Hello All,
I tried a lot to get a link/blog that expalin full scenario
for File to File Scenario with Secure Connection
Kindly let me know if somebody have link/doc for it
that describe all the steps to do configuring this scenario.
What is difference in simple words between
FTPS and SFTP.
Pls help it is urgent as I require for Project work urgently.
Regards

hi rich
go through these links
FTPs connection failed - error ".. certificate rejected by ChainVerifier"
Re: What is SFTP, FTI channels
http://help.sap.com/saphelp_erp2005/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm
FTPS implementation question.
http://help.sap.com/saphelp_nw04s/helpdata/en/43/0e16bfd7b021aee10000000a1553f6/frameset.htm
Server certificate rejected by ChainVerifier:FTPS server(Points Guaranteed)
/people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi
File adapter
thanks
Kunaal

PSE12 recognises my scanner, however, asks to connect??!! Pls HELP urgently

Hello
I have win7pro and win 8.1. PSE12 recognises my scanner, however, after going through and pressing scan it comes up with a error to coonnect the device!! The printer scanner is a HP Officejet 6500a plus if this helps.
Pls advise urgently.

Download and install this: http://support.apple.com/kb/DL907
Restart your Mac.
Reset the printing system:
- Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and then next to the "Use" pulldown, select the printer model (not AirPrint). Wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Issue when doing Delta loads from PSA to DSO using DTP - Pls help Urgent

Hi All,
I have done 3 data loads into PSA and from PSA, iam loading the data into DSO - by splitting that load into 3 using 3 DTPs. (Split that by Fiscal Period).
2 of the DTP loads are extracting the data from 3 PSA requests.
But, one of the DTP load is filtering on ONE PSA request.
So, we are not getting the full data into DSO.
Can some one pls help me why the DTP load is beheaving like this ???
Even though i have not given any filters for Request id, still , for one load its picking up the data by filtering on One Req ID.
Cheers,
Nisha

Hi Jr,
Sorry for late reply.
I think i found the solution, the diff between the DTP's is i ahve ticked " Get request one after another " .
I have changed it now and its working fine.
Thanks,
Nisha

CALL Transaction in background not working pls help URGENT

hi i have writtin a bdc program which uses CALL TRSANCTION everything is working in foreground.
if i schedule the program in background the call transaction does not work. any idea why?????????
pls help its urgent

hi
good
have you checked in the debug mode, if you have checked in the debug mode check wheather it is giving any error before data is displaying in the screen, if any error is displaying as a message than check that error why it is coming there.
If no error is coming than check your flow of the bdc screen in the debug mode , there must be some prob, so that it is not working in the background.
thanks
mrutyun^

Music wont download - pls help urgently

i have tried 5 times to download an album from itunes and every time i have to re-renter my billing details and double check everything is correct but to no avail. after doing this, there's no downloaded music and i don't know if apple will charge me 5 times as well for trying (hopefully not!!). pls help me. thanks

Yes, I have, i think it may have something to do when
it says, "playlist selected for updating no longer
exists"
But making a new playlist didnt work
Then you didn't name it exactly the same as the ones that were deleted. It WILL work. Been there, done that.
Good luck!

Memory allocation in mobile phone ? pls. help.

how can i come to know that how much memory is allocated for heap ?
through codeing i want to know the heap and other memory allocaion detail.
is there any library funcion ?
what is difference between Shared Memory for Storage and heap? and what kind of data store in Shared Memory for Storage ?
pls. help me. i need help before tuesday. 19-7-5.
with thanks
abhay.

FaceTime has been removed from iPhones sold in some Middle Eastern countries at the express wish of the respective Governments.

Cannot use face time after upgrating to ios 6 .password is not recognisible.pls help urgently

I cannot use face time after updating to IOS 6'password is not recognisible here nor to imessage pls help urgently

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

Pls help, urgent... I'm giving out all my duke dollars...

Hi, thanks for reading...
My problem is I need to assignment some value into an variable when the "main" program start and I want the data inside this variable visible to all the class to use (by using the getter methods to get the value),
For example: From the code below (the clsMain), it is possible to get the same value assigned into the "strGrandChildName" variable in the "main" program inside the "clsChild" class? Any idea how to make this thing work? pls help me... with some sample code... i really appreciate any help you guys can give.
Thank You,
Best Regards.
public class clsGrandChild {
private String strGrandChildName = "";
public void mtd_setGrandChildName(String strIn) {
strGrandChildName = strIn;
public String mtd_getGrandChildName() {
return strGrandChildName;
public class clsChild {
private String strChildName = "";
public void mtd_setChildName(String strIn) {
strChildName = strIn;
public String mtd_getChildName() {
return strChildName;
public String mtd_GrandChildName() {
// can i get the same value of strGrandChildName assigned in the main frm here?
public class clsMain extends clsGrandChild {
public static void main(String[] args) {
mtd_setGrandChildName("grand child name");
clsChild objChild = new clsChild();
objChild.mtd_GrandChildName();

public class clsGrandChild {
private String strGrandChildName = "";
public void mtd_setGrandChildName(String strIn) {
strGrandChildName = strIn;
public String mtd_getGrandChildName() {
return strGrandChildName;
public class clsChild {
private String strChildName = "";
public void mtd_setChildName(String strIn) {
strChildName = strIn;
public String mtd_getChildName() {
return strChildName;
public String mtd_GrandChildName() {
// can i get the same value of
alue of strGrandChildName assigned in the main frm
here?
public class clsMain extends clsGrandChild {
public static void main(String[] args) {
mtd_setGrandChildName("grand child name");mtd_setGrandChildName("grand child name") shouldn't be called here, it should be called after the
clsChild object has been created
>
clsChild objChild = new clsChild();objChild. mtd_setGrandChildName("grand child name");
objChild.mtd_GrandChildName();
If to access the variable strGrandChildName before the instanciation of clsChild object is what you needed, then you will need to set the string strGrandChildName as static and also setter method
needs to be static too.
private static String strChildName = "";
public static void mtd_setGrandChildName(String strIn) {
strGrandChildName = strIn;
by doing it this way, the static variables will be created when main thread starts.

PRD Client L.ocked - Pls Help Urgent.

Hi Gurus,
Yesterday i set remote copy for PRD To DEV in background job. Now the Job is cancelled. The PRD Client is locked. If i login " The client is currently locked against logon" - This is error message display all users. Pls advise how to unlock the client.
This is very urgent..
Thanks
Rajesh.

Hi Rajesh,
useful link
http://www.sap-img.com/bc060.htm
you can unlock client from if you have access to any of the client in that system
We can lock a client using SCCR_LOCK_CLIENT and unlock SCCR_UNLOCK_CLIENT functions.
even you can user tp command to unlock
hope this helps,
thanks
kishore

CFloop in Javascript function...pls help urgent

<script type="text/Javascript">
      function XYZ(group_id)
       switch(group_id)
        <cfloop query = "GetProgramAuthGrpRouting">
         case '#GetProgramAuthGrpRouting.group_id#':
          <cfset variables.user_names = "">
          
          <cfquery name="GetGroupUsers" datasource="#request.db_instance#">
           select distinct employee_number from dbo.DIV_USER_GROUP_XREF where division =
            <cfqueryPARAM value = "#request.Pub.Project.division#"> and group_id =
            <cfqueryPARAM value = "#GetProgramAuthGrpRouting.group_id#">
          </cfquery>
          
          <cfif GetGroupUsers.RecordCount gt 0>
           <cfloop query = "GetGroupUsers">
            <CF_GetUser
             query_name = "GetUser"
             employee_number = "#GetGroupUsers.employee_number#">
            <cfset variables.user_names = variables.user_names&''&GetUser.employee_name&'\n'>
           </cfloop>
          <cfelse>
           <cfset variables.user_names = 'No users in this routing group\n'>
          </cfif>
            alert('#variables.user_names#');
            break;
          </cfloop>
     </script>
Hi all I am new to this community and this is my first post here. So if this is the wrong place for these then pls let me know the right area. Thanks.I have looped over the result set using CFLOOP in javascript function and it is working fine. But I want to know if this can be done since javascript is a client side scripting language and CF is a server side. Is this the right way of coding? Can i use cfloop in a javascript function? Please help me as this is urgent. Thanks in advance.

You you can use CFML inside of a JavaScript <script..> block to dynamically build the JavaScript code to send to the client. It is a very powerful technique for building highly interactive web sites.
Just realize that all the JavaScript code is going to be completely built by the CFML and then sent to the browser client through the web server where the JavaScript is executed completely independent of anything that is running on the server. The JavaScript can not read or write variables on the server or vice-a-versa. But it is quite easy to export variable values from ColdFusion to JavaScript. It is a bit more work to export variable values back requiring either the browser or JavaScript to make a new request of the server to send the data. AJAX does allow this to happen behind the scenes making it look like the data is being shared. But in reality it is being passed back and forth with independent HTTP requests and responses.
A recent discussion on this topic:
http://forums.adobe.com/message/1957350#1957350

RFC - XI - TCP/IP scenario. Pls help urgent

Hi All,
I have RFC -> XI -> TCP/IP scenario.
My scenario is quite similar to scenario given in blog:
/people/saravanakumar.kuppusamy2/blog/2005/12/15/socket-integration-with-xi
Questions.
1. Pls explain how Java Mapping is done in XI. ?
2. In real scenario static void main (String[] args) method will
    not be there because request will come automatically from
    SAP source and response from tcp/ip system.
    Am I corrcet?
3. My response is not xml. Pls send me updated code that
    can convert string array byte format to xml.
Is there any simple way to do this scenario.
Full points will be awarded.
Thanks

Hi Rider,
You can implement mapping programs in Java. To process XML documents, use Java API for XML Processing (JAXP), for example. The JAXP supports the Document Object Model (DOM) and the Simple API for XML (SAX). This gives you great flexibility for mapping definitions with Java.
The runtime environment for Java mappings has an mapping API. To use Java mapping, you must define a Java class that implements the Java interface com.sap.aii.mapping.api.StreamTransformation. This interface has two methods:
●     public void execute(java.io.InputStream in, java.io.OutputStream out)
At runtime, the Integration Engine calls this method to execute a mapping. This method contains an input stream for the source document and an output stream for the target document as parameters. These streams are usually XML documents. You can import the substructures to be converted from the input stream and output the converted target document in the output stream.
●     public void setParameter(java.util.Map param)
The Integration Engine transfers parameters to the mapping program with this method. It evaluates these parameters at runtime in the method execute(). This enables you to control the process flow of the mapping.
The transferred object that implements the Java interface java.util.Map contains seven key/value pairs as parameters. These correspond to corresponding fields in the message header. Apart from the MAPPING_TRACE constant, the value objects are of type java.lang.String. The key objects are defined in the class com.sap.aii.mapping.api.StreamTransformationConstants:
(plz check this in the link):
http://help.sap.com/saphelp_nw04/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/content.htm
For Key-Value Pairs, check out the link:
http://help.sap.com/saphelp_nw04/helpdata/en/b3/9a2aeb24dc4ab6b1855c99157529e4/content.htm
Plz reward points if satisfied.
Regards,
Sushama

Error in generating the condition table.. pls help urgent

Hi all,
I have some condition tables to be generated in CRM from ECC.
i am getting the following error for 2 tables : " Generation for application CRM, Usage PR and table CUS601 failed".
But other tables data has been corectly downloaded from ECC to CRM.
I m checking the status in SLG1. and i use tcode : CND_MAS_GEN_OBJECTS.
Kindly help me this,
its very very urgent.
points will be rewarded.
Robin

thanks rajesh for ur reply.
Basically the issue is like this now.
Im trying to download the confition tables data from R3 to CRM. so in CRM...
when i manually try to start initial download the object for a table by R3AS, tcode..
the bdocs are been in intermeditate state in CRM. with yellow.
when i try to reprocess it is throughing a short dump( reason telling : already a record is been availble in table : CNLCRMPRSCALEDIM, trying to insert again.
So m not understanding what the issue would be..
Could you please help me with this. im really in dead situation.
it is working for other tables
Robin

N96-phone recovery-PLS HELP--URGENT

Similar Messages

Maybe you are looking for