N96 predictive text and line 2 PROBLEMS
Just upgraded from N95 to N96 on Orange UK, I have always had Nokias and for years I have been holding down the # key to quickly change from Line 1 to Line 2 or visa versa, now it takes an age to go through the menus to change. Any one know where the shortcut is for Line 2 please, also I cannot find predictive text yet anyone know where that is please - or is this an unfinished phone where some of the important bits have been left off. Help Please.
@Barney: The (#)hash shortcut can only be activated thru the firmware of the phone. I have a N80 and just changed the firmware. In my old FW the (#) shortcut changed to and from silent mode; In the new FW the shortcut changes the line.
In order to change your firmware to on that has ALS (the feature you want) you may have to do a little research and find the correct FW and possibly change your product code. The former is supported by Nokia and the latter voids your warranty.
Feel free to ask any questions as I have a few for you. I live in the US, and our service providers do not support two lines. For the past 10 years I have carried two phones and always wondered about 'Line 2'. I am in the process of doing some research on the subject and am curious about how it works on the your side of the pond. Just for starters here are some questions:
Can your phone receive calls on both lines simultaneously?
Does changing your line only change the outgoing number?
Is the feature solely based on the SIM card or must it be network supported?
Do you have a special SIM card for this feature? (dual IMSI)
Thanks
wise
Similar Messages
-
Is there a way to make comments "move to the back", behind the text and lines?
Is there a way to make comments "move to the back", behind the text and lines?
I am using Acrobat X Standard to "highlight" lines using comments lines at 12pt width and 50% opacity on DWG files converted to PDF. The opacity setting makes the text and lines readable behind the highlighting, but the colors do not print well. Moving the highlighting behind the existing text and lines would allow me to use 100% opacity with more vibrant colors.
Before, we highlighted by hand, but those colors do not scan or copy well. Digitizing the highlighting is cleaner, and can be edited without starting over. The "comments" lines can be applied by Acrobat Reader, Acrobat Standard, and Acrobat Pro, so there's an advantage. Even more important is that the average file size of an 11x17 print that is highlighted and scanned in color is 1000 KB, while doing it this way, they tend to be 100-150 KB, and the text remains searchable. If there's another system that people use, I'm open to that instead. I haven't looked in to doing the highlighting in AutoCAD.
Naturally, everything I'm doing is protected, and cannot be shared, sorry.
Thanks.
Message was edited by: Nathan GoldblattNo, that's not really an option.
-
Preview Printing Negative Images - White text and lines on black background
Desperate for help here. After upgrading to Tiger, I have more instances when Preview displays a PDF correctly but prints certain pages with images, such as graphs and technical figures, as negatives, that is, white text and line art on a black background. Is there any way I can fix this? Any advice would be most appreciated.
I was trying to scan from a Lexmark X5250 into Preview so that I could fax a signed document to a company.
When I chose "To be faxed", with Preview TIFF program under 10.4.6 (combo) (PPC), the document appeares in Preview as a white-on-black (negative) in Preview's open window.
A work-around seems to be that one selects "To be printed", then prints from Preview, then selects (in the lower-left corner drop-down-menu) "Fax PDF". (Unfortunately, the modem still won't hang-up properly -- is this because of my ADSL filter on the fax phone-line? ). -
Any ideas how I can insert a pdf into word, using the insert object option. However the pdf i want to insert has text and lines annotated, but once inserted the comments don't appear???? any help would be greatly appreciated.
You will need to find a forum for MS Word since that is the software that you are trying to manipulate in this. If you think the processing/creation of the PDF plays a role then you should ask in the forum for the software that you are using to create the PDF.
This forum is for issue regarding downloading and installing Adobe trial products, so in any circumstance, your issue does not fit in this forum. -
Need one space between text and line color
Is there any way to offset the text from the border a bit? I
would like to have a black line around some boilerplate text,
but the text is always butted against the border. Is there a
way to offset the text a bitHamidHelal wrote:
Lan_Desu wrote:
Please, help me.
Is there any way to offset the text from the border a bit?
I would like to have a black line around some boilerplate text, but the text is always butted against the border. Is there a way to offset the text a bit ?
I've been searching in this forum and google and didn't find the answer yet.
Hi, Lan
if yo want to place a line you may choose underline option. Otherwise take a line/draw a line and keep space between the text and line.
Hope this helps
HamidIs there a way easily?
I already know that that solution. But it is troublesome when I face editing later - I have to edit all of it.
But thanks for the answer :) -
How do I darken or change the color of the iCal gray text and lines?
How do I darken or change the color of the iCal gray text and lines? The gray text is very hard to read.
apple dosn't care about us anymore
I remeber way I went back to os x10.6
it's a tiny bit easier to read
gosh I may have to start a boycot of crapple -
Suggestions - predictive text and text entry
I don't know if this forum is intended for suggestions but here are a couple anyway.
1. Because email and sms text do not operate in landscape mode the keyboard is very small. This leads to a large number of text entry errors compared to ther devices I have used. The screen sensitivity is excellent so this is ont a problem with using a touch device. Allowing landscape data entry would go a long wawy to solving this problem - the keyboard when used with safari in landscape mode is a lot better (perhaps 10% of the missed keys). An alternative which would be better for single handed use would be to ditch the qwerty layout and have a key pad that runs to 4 or 5 rows of keys instead of 3. In most cases it is only neccesary to see a single line of text entry so there is plenty of screen re-estate to do this.
2. The predictive text feature on the iPhone is very poor. This is due to a fundamental error in its design. The current implementation assumes that the current word typed is complete but may be misspelled. To be more useful the feature needs to assume that the characters typed are correct and suggest complete words that start with the fragment available. The predictive text in Windows mobile is infinately better that that of the iPhone (and one of the few features I miss from my old phone!).
If this is the wrong place for posting these suggestion - sorryThis is a user to user forum. To submit feedback to Apple, use this form:
http://www.apple.com/feedback/iphone.html -
Losing predictive text and error correction on keyboard
A strange thing happened to me and I am wondering if others have experienced this.
I was in the middle.of typing a message and the predictive text/spelling check, suddenly, went away. The keyboard was still there but without these options. Tried restarting the app but no joy. Tried other apps and found the same thing . Finally, rebooted and it came back.
Any thoughts?This is a user to user forum. To submit feedback to Apple, use this form:
http://www.apple.com/feedback/iphone.html -
No predictive texting and more !?
I was surprised to talk to Palm to confirm that my palm pre plus has no predictive text.
I'm quite shocked that any old flip phone has predictive texting on sms, email and web browsing but the Pre doesn't. Am I missing something?
Also:
No camera zoom ( my 10 year old motorola flip has it )
No flash support on websites.
I really want to give Palm support to keep em in their market share but....jewelsthecat wrote:
I can't believe it either.....I was looking for the words to pop up when messaging! I want PREDICTIVE TEXTING!!!! and wondering if phone takes a media card for photos??? ATT sold me one but I can't figure out where to put it in?
No webOS devices have a card slot (yet). Just plug in the phone to your computer, and you have the USB Mode option. Easy to drag and drop supported media to your phone!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked! -
Static text field line height problem
When an FLA that was created in OSX is edited on a PC the
line heights in static text fields are lost. This was a problem in
earlier versions of flash however it was generally fixable by
republishing from the platform on which the text was originally
set. As of CS3 the problem may have gotten worse:
1. I developed a flash project in OSX CS3. It included many
static text fields with varying individual line heights.
2. I sent it to a colleague who was adding some tracking
tags. He was working on a PC.
3. He did his bit and sent it back.
4. In the authoring environment the text looked fine. But
after republishing, all the static text fields lost their line
height settings - that is all the lines within any given text field
inherited the line height of the first line within that text field.
5. Only text fields that were edited by my colleague were
affected by this problem. Text fields that weren't edited are fine.
6. It seems that the only way to get past this problem is to
actually delete these text fields and create new ones. This would
take about a week. Republishing doesn't work.
Any ideas?NP
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Kim" <[email protected]> wrote in message
news:ern9ua$54m$[email protected]..
>I was missing a div. Sorry for wasting your time. Thanks
>
> Murray *ACE* skrev:
>> <p style="line-height:2.5;">about, <span
class="xlarge"><a
>> href="#article">articles</a></span>,
blog, css, contact, Copenhagen,
>> <span class="large"><a
href="#article">download</a></span>, <span
>> class="large"><a
href="#logo">logo</a></span>, design, <span
>> class="large"><a
href="#draw">drawings</a></span>, family, freelance,
>> football, graphics, javascript, monarchy, mysql,
news, <span
>> class="smallplus"><a
href="#article">php</a></span>, portfolio, <span
>> class="xlarge"><a
href="#reboot">rebooted</a></span>, redesign,
<span
>> class="medium"><a
href="#logo">republic</a></span>, seo, services,
spam,
>> universality, usability, <span
class="smallplus"><a
>> href="#work">websites</a></span>,
webstandards, <span class="xlarge"><a
>> href="#work">work</a></span>, xhtml,
xml</p>
>>
>>
>
> --
> Kim
> ---------------------------
>
http://www.geekministry.com -
Dbms_lob and line size problem
Hi,
below is a simple function which returns a CLOB.
When I call this function from sqlplus and spool the result in a
file via the SPOOL command I get a line break after 80 characters.
When I replace in the function the CLOB type with a VARCHAR2 type
the whole TESTSTRING is printed on ONE line.
I do specify 'SET LINESIZE 200' in both cases and the length of
TESTSTRING is smaller than 200 characters.
How can I increase the line size for the CLOB case ?
CREATE OR REPLACE FUNCTION GetSimple (
RETURN CLOB
IS
RESULT CLOB;
TESTSTRING CONSTANT VARCHAR2(4000) := '123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_AFTER_LINEBREAK' ;
BEGIN
-- create CLOB for RETURN
dbms_lob.createtemporary(RESULT, TRUE);
dbms_lob.writeappend(RESULT, length(TESTSTRING), TESTSTRING);
RETURN RESULT;
END GetSimple;
/problem solved !
I had to add
SET LONGCHUNKSIZE 4096;
default is 80 -
I am coverint a 35 page catalog from word 07 ..... it is built with tables listing prodcts, descriptions and prices. Some text is faded out, some table lines end up thicker, some don't appear at all. It will primarily be a web doc but I also tried optimizing for print and issues were still there. Checked all discussions could not locate similar content. Thanks for your help!!!!!
For the replace and delete pages, I can only guess that you are messing up some of the bookmarks or links in the page from what I think you have based on the description. I would work on copies between each stage so that you can at least go back to the last success stage. If possible, you are better to go back and do the modifications in the original page and the recreate the PDF. If that is not possible, then maybe a better explanation of how you are creating the PDF would help folks understand your process fully and suggest a solution.
On the latter, I would do a repair on Acrobat. However, it may be in the process you are using in the conversion from WORD. How are you creating the PDF from WORD? Have you updated AA9 and not simply have 9.0? The confusing point is that you talk about Distiller for getting the PDF from WORD. Distiller is often involved, but only behind the scenes and normally you either print to the Adobe PDF printer, use PDF Maker, or use the MS plugin for PDF creation. So when stating Distiller, it is unclear what process you are using since none of the methods I mention state the use of Distiller even if it is used in the background. -
Dynamic text and animated masking problem?
Hi
Can anyone suggest to me what might be happening here. I will
try and explain step by step... I am using flash MX
I have dynamically created a movieclip which I want to mask -
_root.createEmptyMovieClip("myMovie", 1);
I dynamically add a movieclip into it which I then load a jpg
into -
_root.myMovie.createEmptyMovieClip("image1", 0);
_root.myMovie.image1.createEmptyMovieClip("newFile", 0);
_root.myMovie.image1.newFile.loadMovie("http:...");
I dynamically create another movieclip called myNormalText1
insde the first movie -
_root.myMovie.createEmptyMovieClip("myNormalText1", 2);
this holds a dynamically created text box called mytext -
_root.myMovie.myNormalText1.createTextField("mytext",1,0,0,0,10);
// the text box formating is dynamic, uses devise fonts,
arial and is red ect.
I have then attach a movieclip and use it as a mask to create
a transition effect over _root.myMovie (which holds the image and
text)
_root.attachMovie("mask","mask",5);
_root.myMovie.setMask("mask");
the mask movieclip is what is causing me the problem!!!
method one
when the mask movieclip contains this -
a phisically drawn box that fills the whole page
I use a shape tween to make the box transform into a thin
rectangle down the left hand side of the screen
I get a transition effect which makes _root.mymovie disapear
to the left which is what I want!
The image and text are masked correctly!
*** Please note I am aware that dynamic text boxes using
devise fonts are not displayed correctly under a mask layor when
they are not embeded, in flash MX. I am able to view my movie in a
browser window which uses flash player 8 that now allows dynamic
devise fonts to be masked!
method two
I then wanted to create a different transition effect like
venitian blinds,
so, in my mask movieclip I created several rectangles that
fill the page
again I used a shape tween so they get thinner,
when I tested my movie the same way in the browser,
the mask did not work correctly over my text in
_root.mymovie???
yet the image in _root.mymovie was masked correctly???
the only differance between the two methods is the shape
tween in method one uses one box shape, and the shape tween in
method two uses several rectangler box shapes.
I was wondering if anyone knows why the text is correctly
masked in case one and is not correctly masked in case 2
I want to do other transition effects using masks in this way
and I am having no luck :-(
Thanks for any advice
Claire WallHi
I have been researching this ALOT and found some info that
basically tells me when I use setMask() over dynamic device fonts,
the mask uses its bounding box (the rectangular outside edge of the
whole mask movieclip) as the mask.
In case 1 the mask moviclips bounding box shrinks when the
shape tween plays because there is one rectangular box being
tweened. It appears to mask the text correctly.
In case 2 I have variouse different shape tweens going on
inside the mask movieclip so the bounding box stays the same size
across the whole screen and it wont appear to mask my text
correctly.
I think I have answered my own question, but this still
leaves me stuck! I want to create this venitian blind effect using
masks over devise fonts.
I came up with the idea of using for example 4 different
masks over the one movieclip but again flash doesnt like this and I
guess I can only use one setMask() per movieclip?
Can anyone suggest a way I can use multiple dynamically
created masks on one movieclip or cant it be done?
Thanks
Claire x -
Regular expression and line break problem
Hi friends,
I was trying out one regular expression in java but, for some reasons its not working. The test string looks something like this in the eclipse watch window:-
Test string:-*
Content-Disposition: form-data; name="name"\n\nOmkar\n|
In the above test string the last character is a pipe symbol.
And the java code i have written is: -
code:
public static void getParameterValue(String paramName, String testParameter) {
String parameterRegex = "name=\""+paramName+"\"(.*)|";
Pattern pattern = Pattern.compile(parameterRegex,Pattern.DOTALL);
Matcher matcher = pattern.matcher(testParameter);
boolean isFound = matcher.find();
if (isFound) {
System.out.println("The parameter value is : "+matcher.group(1));
}After, the debug line moves over the first line in this method, the value contained in the "parameterRegex" string variable is:-
Regex:-*
name="name"(.*)|
However, my SOP statement, prints null....even though, "isFound" variable is true....can someone please explain me what could be the problem, where i am going wrong ?....
I have even, set the DOTALL option for the regex.
please some one help me!
Thanks and Regards
Omkar Patkarzomkar wrote:
Sorry, folks, i did not mention the fact that i had posted the my query, in Java ranch also. But my problem lead to another problem of CROSS - POSTING !
Apologies, for that !....but please, does any one have a solution to my regex ? .... any one ? please ?
The value i get in paramaname is :- name
which is present in double quotes in test string.
is my regex incorrect ?The discussion at JavaRanch seems to be pretty alive, so why not leave this thread and continue there? That way, people won't have to first read two different threads on two different forums before trying to help you. -
Text and layer position problems
Hi, I am creating a webpage and I have installed a background
image. for which I have centred and all is fine.
I am now using layers to add text so I can place the text
wherever I want.
But when I save and view in IE and Firefox the text is not in
the correct position. I have tried a number of things to solve this
all to no avail.
Please can someone help me.
The text I have so far is:> I am now using layers to add text so I can place the
text wherever I want.
This is number 4 in the top 5 mistakes someone can make in
building their
pages. Here's why -
http://www.great-web-sights.com/g_layer-overlap.asp
It will help you to understand the difference between
absolute positioning
and centering content. Your layer is absolutely positioned,
and your
background is centering. That's never going to work the way
you want....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"YNWA4EVA" <[email protected]> wrote in
message
news:[email protected]...
> Hi, I am creating a webpage and I have installed a
background image. for
> which
> I have centred and all is fine.
>
> I am now using layers to add text so I can place the
text wherever I want.
>
> But when I save and view in IE and Firefox the text is
not in the correct
> position. I have tried a number of things to solve this
all to no avail.
>
> Please can someone help me.
>
> The text I have so far is:
>
>
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
> <title>Liverpool Hope University - IT Deanery Book
Sales</title>
>
> <style type="text/css">
> <!--
> body {
> background-image: url(template.png);
> background-repeat: no-repeat;
> background-attachment: fixed;
> background-position:center center;
> margin-top:0;
> margin-bottom:0;
> margin-left:0;margin-right:0;
>
> }
> #Layer3 {
> position:absolute;
> width:200px;
> height:115px;
> z-index:1;
> left: 334px;
> top: 115px;
> }
> -->
> </style></head>
>
> <body>
> <div id="Layer3">
> <p>I want my text here </p>
> </div>
> </body>
> </html>
>
Maybe you are looking for
-
BPM Composer Player Configuration
Hi I Configure my BPM server Behind a proxy (3 SOA Cluster and Proxy Server). when I want To play a process in BPM Composer, and launch to web Form (Not ADF form), BPM Composer try to load form from url that contain server name instead of Proxy url.
-
My program in Java doesn't work
Could anyone can help me in making this small project for me. I'm making sample project about Student Transcript but it doesn't want to work properly. So please kindly try to help me. This is the code: import java.awt.*; import java.awt.event.*; impo
-
Hello,,, am using macbook air and i try to install windows on it but after i finish i mess with the hard disk setting from the windows partition and the os x deleted and when i turn it on it shows only the widows and it won't take my os x bootable
-
How to run report on web in forms 10g
dear all, i have a form which call a report in form 6i i used the run_object(); how to run the report on web in forms 10g? is there any html settings? thanks Muhammad Nadeem
-
Some Questions in settings for Lenovo A6000
1) I just want to know how to activate anti theft pin , is ther any default pin nos to activate or if i should change the password then how to create a new Password.