N96 Problem with "broken" messages and deleting th...
Hello everybody
I have a N96 with the last firmware version.
It has been in repair for a week and now I got it back, I noticed that all my images are shown as "broken image icons".
When I want to delete them it says: general system error.
I also tried to delete them using Ybrowser but I can't find any pictures, not on any disk!
I'd really like to delete them as I have them stored on my laptop, and the 101 broken image icons slow down my Images menu and they're just in the way...
Please help me! Thank you!
The 'broken' images are not really there. The gallery is not a folder but a database that contains list of images throughout the phone, mass memory and memory card. Some images have been deleted but the database didn't get updated due to some error or corruption.
If you have other copies of the images (ie: on your PC), you could restore them to the phone in the same folder, then they should appear correctly in the galelry again and you can delted them correctly.
UNfortunately, there is no way to refresh the images like you can music files in the music player, so if the above doesn't work you might have to reformat your phone with the code *#7370# - this will delete all personal data in the phone memory, so make a PC Suite backup first.
Similar Messages
-
I have two Iphones 5 with different email addresses sharing one Apple ID account.Both are using IOS 8.
I would like to set up a new Apple Id for one of the phones and remove it from the old account.
If I do that, can I move all of the purchased apps and songs to the new Apple account?
Also, will sharing one Apple ID account with two devices cause problems with using messaging and FaceTime?Sharing an iCloud account between two devices can be done without causing issues with iMessage and FaceTime, just go into Settings for each of these functions and designate separate points of contact (i.e. phone number only, or phone number and unique email address). While that works, you'll then face the problem where a phone call to one iPhone will ring both if on the same Wi-Fi network -- but again, that can be avoided by changing each phone's settings.
Rather than do all that, don't fight it -- use separate IDs for iCloud. You can still use a common ID for iTunes purchases (the ID for purchases and iCloud do not have to be the same) or you can use Family Sharing to share purchases from a primary Apple account. -
Problems with mail, messags, and social network accounts
Hi,
first of all, sorry for my bad English.
I would like to know if there is a maximum limit of accounts (email, social network, etc. etc.) that OS10 can handle.
On my Passport (OS10 Version 10.3.0.675) I have the following:
- 1 BBM
- 1 WhatsApp
- 1 Facebook
- 12 Mail
Now, when I try to insert another account (for example mail or Twitter), I recived the following error message:
"The maxximum accounts has been reached".
Is that right?
With the Z10 and the Q10, if I remember correctly, I did not have this problem.
I need to add more email accounts, someone can help me?
Thank you all.
I'M NOT LAZY,
I JUST DON'T GIVE NOTHING!Let me see what I can find out and I'll get back to you when I know more! Thanks
Did someone help you? Click Like! Did a post solve your issue? Click Accept as Solution!
Follow me on Twitter or Google+ and subscribe to the Inside BlackBerry Help Blog -
Problems with text messages and internet access
I have an Apple 5c and over the last few weeks my text messages to most people had not been completing the send. Now, in addition, I am not receiving most messages and I can't access the internet for most apps (like maps, yahoo search, youtube). Is anyone else having this problem? Does anyone have any suggestions as to why this is happening and how to go about fixing it?
Try removing then reinserting the SIM card -
SIM Card Inserting Removing Apple iPhone 5 | Verizon Wireless
It may just need a refresh to reconnect to the network again. -
Problem with h:message and ajax
Hello,
I noticed a strange problem occurring with my richfaces application. It is as follows:
I have a contact form with "real-time" validation of each field. When a valid submission of the form occurs, the form is reRendered and strangely, the first field shows a validation passed status even though it is empty.
Here is my jsp:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xmlns:ui="http://java.sun.com/jsf/facelets"
xmlns:h="http://java.sun.com/jsf/html" xmlns:f="http://java.sun.com/jsf/core" xmlns:rest="http://restfaces.dev.java.net"
xmlns:a4j="http://richfaces.org/a4j" xmlns:rich="http://richfaces.org/rich">
<body>
<ui:composition template="/template.xhtml">
<ui:define name="title">
<title><h:outputText value="todo: accueil" /></title>
</ui:define>
<ui:define name="body">
<a4j:outputPanel id="wrapper" layout="block" styleClass="wrapper">
<rest:link value="contactAction" hreflang="fr" lang="fr">
<f:param name="language" value="fr" />
<h:outputText value="#{msg['langue.francais.libelle']}" />
</rest:link>
<rest:link value="contactAction" hreflang="en" lang="en">
<f:param name="language" value="en" />
<h:outputText value="#{msg['langue.anglais.libelle']}" />
</rest:link>
<br />
<br />
<a4j:outputPanel rendered="#{contactView.envoiReussi}" ajaxRendered="true">
<h:outputText value="envoi reussi todo"/>
</a4j:outputPanel>
<a4j:form id="formulaireContact" reRender="wrapper">
<h:panelGrid columns="3" columnClasses="libellesColonne,champsColonne,validiteColonne">
<f:facet name="header">
<a4j:outputPanel layout="block" styleClass="formulaireContactHeader">
<h:outputText value="todo header" />
</a4j:outputPanel>
</f:facet>
<h:outputText value="#{msg['message.from.email']}" />
<a4j:outputPanel id="fromEmail">
<a4j:region id="fromEmailRegion">
<h:inputText id="emailI" value="#{contactView.message.email}" required="true"
requiredMessage="#{msg['message.valeurRequise.email']}" validatorMessage="#{msg['message.erreur.email']}" binding="#{contactView.bb.emailI}">
<a4j:support id="emailS" event="onblur" reRender="fromEmail, emailMP" ajaxSingle="true" actionListener="#{contactView.valider}" limitToList="true" ignoreDupResponses="true" />
<f:validator validatorId="adresseEmailValidator" />
</h:inputText>
<a4j:status>
<f:facet name="start">
<h:graphicImage value="#{img['ajax-loader']}" />
</f:facet>
</a4j:status>
</a4j:region>
</a4j:outputPanel>
<a4j:outputPanel id="emailMP">
<h:message for="emailI" infoClass="champValide" />
</a4j:outputPanel>
<h:outputText value="#{msg['message.from.nom']}" />
<a4j:outputPanel id="nom">
<a4j:region id="nomRegion">
<h:inputText id="nomI" value="#{contactView.message.nom}" required="true"
requiredMessage="#{msg['message.valeurRequise.nom']}" validatorMessage="todo: nom non valide" binding="#{contactView.bb.nomI}">
<a4j:support id="nomS" event="onblur" reRender="nom, nomMP" ajaxSingle="true" actionListener="#{contactView.valider}" limitToList="true" />
<f:validateLength minimum="2" />
</h:inputText>
<a4j:status>
<f:facet name="start">
<h:graphicImage value="#{img['ajax-loader']}" />
</f:facet>
</a4j:status>
</a4j:region>
</a4j:outputPanel>
<a4j:outputPanel id="nomMP">
<h:message for="nomI" infoClass="champValide" />
</a4j:outputPanel>
<h:outputText value="#{msg['message.sujet']}" />
<a4j:outputPanel id="sujet">
<a4j:region id="sujetRegion">
<h:inputText id="sujetI" value="#{contactView.message.sujetMessage}" required="true"
requiredMessage="#{msg['message.valeurRequise.sujet']}" validatorMessage="#{msg['message.erreur.sujet']}" binding="#{contactView.bb.sujetI}">
<a4j:support id="sujetS" event="onblur" reRender="sujet, sujetMP" ajaxSingle="true" actionListener="#{contactView.valider}" limitToList="true"/>
<f:validateLength minimum="2" />
</h:inputText>
<a4j:status>
<f:facet name="start">
<h:graphicImage value="#{img['ajax-loader']}" />
</f:facet>
</a4j:status>
</a4j:region>
</a4j:outputPanel>
<a4j:outputPanel id="sujetMP">
<h:message for="sujetI" infoClass="champValide" />
</a4j:outputPanel>
<h:outputText value="#{msg['message.corps']}" />
<a4j:outputPanel id="corps">
<a4j:region>
<h:inputTextarea id="corpsI" value="#{contactView.message.corpsMessage}" cols="20" rows="5" required="true"
requiredMessage="#{msg['message.valeurRequise.corps']}" validatorMessage="#{msg['message.erreur.corps']}" binding="#{contactView.bb.corpsI}">
<a4j:support id="corpsS" event="onblur" reRender="corps, corpsMP" ajaxSingle="true" actionListener="#{contactView.valider}" />
<f:validateLength minimum="20" />
</h:inputTextarea>
<a4j:status>
<f:facet name="start">
<h:graphicImage value="#{img['ajax-loader']}" />
</f:facet>
</a4j:status>
</a4j:region>
</a4j:outputPanel>
<a4j:outputPanel id="corpsMP">
<h:message for="corpsI" infoClass="champValide" style="vertical-align: top" />
</a4j:outputPanel>
<a4j:outputPanel/>
<a4j:outputPanel>
<rich:paint2D id="captcha" width="#{contactView.captchaWidth}" height="#{contactView.captchaHeight}" format="jpeg"
paint="#{contactView.paintCaptcha}">
<f:attribute name="alt" value="todo" />
</rich:paint2D>
</a4j:outputPanel>
<a4j:outputPanel />
<a4j:outputPanel>
<h:outputText value="todo Text on Image:" />
</a4j:outputPanel>
<a4j:outputPanel id="secureText">
<h:inputText id="secureTextI" value="#{contactView.secureText}" size="20" required="true" binding="#{contactView.bb.secureTextI}">
<f:validator validatorId="captchaValidator" />
</h:inputText>
</a4j:outputPanel>
<a4j:outputPanel id="secureTextMP">
<h:message for="secureTextI" />
</a4j:outputPanel>
<f:facet name="footer">
<a4j:outputPanel layout="block" styleClass="formulaireContactFooter">
<a4j:commandButton value="#{msg['message.envoyer']}" action="#{contactView.envoyer}"/>
</a4j:outputPanel>
</f:facet>
</h:panelGrid>
</a4j:form>
<a4j:outputPanel layout="block" styleClass="push" />
<a4j:log popup="false" level="ALL" style="width: 800px; height: 600px;"></a4j:log>
</a4j:outputPanel>
</ui:define>
</ui:composition>
</body>
</html>Here is the managed bean method upon which submission is performed:
public String envoyer() {
log.debug("envoyer");
service.envoyerMessage(this.message);
try {
service.envoyerSms(this.message);
} catch (MalformedURLException ex) {
log.debug(ex.fillInStackTrace());//todo
} catch (IOException ex) {
log.debug(ex.fillInStackTrace());//todo
this.bb.setLocalValuesSet(false);
this.bb.setSubmittedValues(null);
this.bb.setValues("");
this.envoiReussi = true;
return null;
}Can anyone tell me why the first h:message located within the following panel: (emailMP) displays this strange behavior?
Thanks in advance,
Julien.see subject line...
-
Problems with camera roll and deleting applications
Hi,
I'm hoping someone can help me. On my iPhone 3G (with Orange) I am having a couple of issues which I have not been able to resolve.
Firstly, I have no problem taking pictures and them then appearing on my camera roll, but whenever my phone is turned off, these pictures then disappear. This has happened before and after updating my phone with the latest version.
Also, I am unable to delete applications. I have tried pressing and holding an app icon, waiting for it to shake and the "x" to appear and nothing happens. If I then release the icon, it just opens the app. This happens both with the built-in apps and ones I have downloaded.
Any ideas?http://www.iphoneincanada.ca/how-to/how-to-fix-iphone-camera-roll-crash-and-phot os-turned-to-other-in-itunes/
I tried this yday, fixed the problem straight away!! -
This has been an issue since acquisition in July. Very frustrating experience ! Most current update has been applied and since no fix. Patience is thin.
do you get the same screen as ive posted here > https://supportforums.blackberry.com/t5/BlackBerry-Q10/Facebook/m-p/2712239#M14753
this has been happening all over the world on various phone suppliers and networks and there has still been no official reply from what the problem could be.
its happened to me 3 times within a week and been fine ever since.
no idea if its a phone,3G,4G,supplier,facebook problem. -
Since installing Mountain Lion i have a problem with Mail. I delete a number of messages from the same person but keep the newest message in my Inbox. I actually delete them from the Trash. The next time i open Mail the deleted messages are back again. Can anybody please help as this is getting annoying. Thanks in Anticipation.
Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash.
Triple-click the line below to select it, then copy the selected text to the Clipboard (command-C):
find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl \) 2> /dev/null | wc -l
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
The output of this command, on a line directly below what you entered, will be a number such as "41." Please post it in a reply. -
Problem with the MenuBar and how can i delete a own component out of the storage
Hello,
I opened this thread in the category "Flex Builder 2", but
under this category my questions fit better.
I have a problem with the MenuBar and a question to delete a
component out of storage.
1. We have implemented the MenuBar, which was filled
dynamically with XML data.
Sporadically it will appear following fault, if we "mousover"
the root layer.
RangeError: Error #2006: Der angegebene Index liegt
außerhalb des zulässigen Bereichs.
at flash.display::DisplayObjectContainer/addChildAt()
at mx.managers::SystemManager/
http://www.adobe.com/2006/flex/mx/internal::rawChildren_addChildAt()
at mx.managers::SystemManager/addChild()
at mx.managers::PopUpManager$/addPopUp()
at mx.controls::Menu/show()
at mx.controls::MenuBar/::showMenu()
at mx.controls::MenuBar/::mouseOverHandler()
Here a abrid ged version of our XML to create the MenuBar:
<Menuebar>
<menu label="Artikel">
<menu label="Artikel anlegen" data="new_article" />
<menu label="Artikel bearbeiten" data="edit_article" />
<menu label="Verpackung">
<menu label="Verpackung anlegen" data="new_package" />
<menu label="Verpackung bearbeiten" data="edit_package"
/>
</menu>
<menu label="Materialgruppe">
<menu label="Materialgruppe anlegen"
data="new_materialgroup" />
<menu label="Materialgruppe bearbeiten"
data="edit_materialgroup" />
</menu>
</menu>
</Menuebar>
It is a well-formed XML.
2. Delete a component out of storage
We have some own components (basically forms), which will be
created and shown by an construct e.g.
var myComponent : T_Component = new T_Component ;
this.addChild(myComponent)
Some of our forms will be created in an popup. On every call
of the popup, we lost 5 mb or more, all childs on the windows will
be removed by formname.removeAllChild();
What cann we do, that the garbage collector will dispose this
objects.
Is there a way to show all objects with references (NOT
NULL)?
I have read in the Flex Help, that
this.removeChild(myComponent) not delete the form and/or object out
of the storage.
Rather the object must be destroyed.
It is sufficient to call delete(myComponent) about remove
this object out of the storage as the case may be that the
garbage-collector remove this object at any time?
Or how can I destroy a component correctly. What happens with
the widgets on this component e.g. input fields or datagrids?
Are they also being deleted?
Thanks for your help.
MatzeIf you mena the "photo Library" then you cannot delete it.
This is how iphone handles photos. There are not two copies. There a re simply two places from which to access the same photos. ALL photos synced to iphone can be accessed via Photo Library. Those same pics can be accessed via their individual folder. -
when i try to order prints i get an error message saying there is a problem with my network and my network is working. How can i solve this problem?
Try a different media. I have good luck using Maxell discs.
-
I keep having the same problem with my messages over and over again. My number is not checked in my message settings it just unchecks itself
Dear Tomarshe
I had the same problem a couple of weeks back.
What I did was that I restarted that Ipad of mine and voila!
Problem solved!
hope this helped!
- DASHdotDASHdot -
Problems with dropped calls and no reception on Samsung Continuum
My mother and I both purchased a Samsung Continuum in late March 2011, and have experienced the same problems with the phone. The device drops at least 2-3 calls per day, often on the same conversation; we have not found that location or time of day makes a difference. The phone freezes up frequently, even if no apps are running in the background. We lose our 3G network reception frequently, and cannot access our texts, emails, or the internet. The screen saver kicks in even when we are actively dialing a number, or typing in a text message. The overall performance of the phone is also poor, and it is quite slow much of the time.
We have raised this issue several times with a representative at one of the Verizon stores, but he states that he can find no problem with the phone, and that these issues may not be covered under our insurance plan. None of my friends with non-Samsung phones are having the same problems with phone reception and performance. I am aggravated enough with these issues that I am considering reactivating my old Blackberry, which worked like a charm.
I am not upset that my phone has not been updated to Android 2.2. I just want the phone to perform as stated, and not fail at its primary function: making and receiving phone calls. I am not certain if these problems originate with the phone, Verizon, or Samsung, nor do I care. I just want to resolve these issues as soon as possible, or I will have to look at other alternatives.
Thank you.If this doesn't work...now what??? I have a useless $400 plus piece of unreliable junk. My Motorola Razor was ions more reliable than this phone...very, very sad but true.
What carrier were you using with the Razor? AT&T? Same area?
Dave M.
MacOSG Founder/Ambassador An Apple User Group iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch) -
Problems with .ARW files and auto toning
problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the helpsorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place. -
So my itunes says that there is a problem with my itunes and i have to restore it but i have purchased ne songs through itunes on my ipod not through the computer so of course i would have to transfer purchases on my ipod to the computer before i restore it so it does not delete everyting and then i cant back them up. So i went to transfer purchases and It wouldent let me. So how do i transfer my purchases before i restore my ipod so i can back it uup so i dont lose everything. Thanks
There is a backup plan after doing the Restore. Read this.
-
Is there a problem with the itunes and quick time download pages or is it my internet.
Is there a problem with the itunes and quicktime download pages or is it just my internet.
Some more developments ... the issue appears to be browser-specific. I can't see the download controls at the moment in either IE 8 (I'll get your message) or Safari for Windows 5.0.5 (I'll just get the blank box). But I can see the download controls in Firefox 4 and Chrome (whatever version I have of that).
So it might be worth installing Firefox and seeing if you can get the downloads via that:
http://www.mozilla.com/en-US/firefox/new/
Maybe you are looking for
-
Can I move/rescale more than one still image all together, when they will all use the same parameter
Okay, basically, I like to make small, simple movies for my DVD menus. I make these with premiere CS5.5. They are just a series of stills as a slide show, with appropriate music. What makes these so time consuming is this: I have maybe twenty pic
-
Why can't I get Adobe flash player to download?
Why can't I get the Adobe flash player to download to my game(Gandens of Time)?
-
Using Logic Pro with Reason 3.0
I am trying to use logic Pro with reason 3.0. I want to be able to sync them together to use redrum within reason as my drum machine. I am using a MOTU 828 mk II audio interface with 8 in's and 8 out's. When I start logic first and the reason I am no
-
SCCM2012 SP1 - Problem with language SCCM Client
Hello all, I have upgraded my primary server with SCCM2012 Sp1 last week. I used OSD System to deploy workstation : Windows 7 SP1 French. And now, when i open my Software Center, the language is English and not French. I dont understand why When i go
-
Editing properties of multiple fields causes all fields to resize or shift position
While editing a form, if I select multiple text fields, right click, and select Properties, all the fields become the same size, or shift their position on the screen. It seems to repeat whatever operation you had previously done before, so for examp