N96 ram memory problem

hi, i have my n96 for two weeks now. i don't have any problems with nokia maps, the pc suite, music player... (i've heard many saying that they have these problems), my problem is with the ram memory. i usually have only 38.7 Mb of free ram memory, even if i don't have any programes running in the background (not that i know of - i removed all programes installed by me). i updated the soft, hard reset. still the same problem.

The same problem for me too !
After booting my N96 with Handy Taskman I can see that I have only 45 Mb free RAM and with 128 Mb RAM it's not normal !
I asked the question on-line to Nokia and they were not capable of giving me an answer!
EverBeFree

Similar Messages

Problem with my ram memory

I got 3 gigs of ram and after some of memory burn I'm able to have only 2 gigs of these ram. But today I try to find why. And after a multiples tests I found that on my riser A the slot 2 is lighting on but I try to put my +riser B+ intead of my +riser A+ at the place of my +riser A+ and the same problem arrive. So, after my test I found it's probably my motherboard but I found my +riser B+ works well and I put these configuration and I found my 3 gigs:
*_Riser A_*: nothing
*_Riser B_*:
Slot 1= 1 gigs
slot 2= 1 gigs
Slot 3= 512 mb
Slot 4= 512 mb
So my question is: I know that's not the configuration for the ram memory, it's suppose to be:
*_Riser A_*:
Slot 1= 1 gigs
slot 2= 1 gigs
Slot 3= nothing
Slot 4= nothing
*_Riser B_*:
Slot 1= 512 mb
slot 2= 512 mb
Slot 3= nothing
Slot 4= nothing
but can I have any problem with my new configuration like my ram memory are not working like they should or anything like this?
Thank's!

No, if it is the slot, there is nothing you can do that I know of - I believe the slots are part of the logic board (not sure on a laptop, but they are on an iMac) - to find out, do take it to an Apple store; the Genius Bar advice and diagnosis is free. At least you would know if it is the slot and how much it would cost to repair or replace it. Here is some info that may help:
https://discussions.apple.com/thread/5279862
http://support.apple.com/kb/PH14206

N96 Memory problem (internal 16GB)

N96 Memory problem (internal 16GB)
If I fill the internal memory with more than approx 5gb the phone goes crazy...
(9,3Gb free)
Here are a couple of examples
* The phone becomes alot slower
* When powering up the phone stops at a white blank screen until * I press the power button again.
* When starting the music player all buttons associated with the music player(both on phone and handsfree) becomes unresponsive and the only way to stop the music is to remove the battery to turn off the phone.
Another problem that occasionally occurs even if I have more free space on my memory card is:
* When using the alarm clock there is a 33% chance that the phone will freeze when I turn it off. The only way to use the phone again is to remove the battery.
I haven't updated the phone yet because the update isn't available yet in sweden it seems.
Solved!
Go to Solution.

This may be the issue, New content!:
Scanning for new content (slowness in UI)
- This is somewhat improved in 11.018 but still:
- If you've loaded many Pictures, Videos or Music, you may see the device appear to slow down or even become unresponsive. After new content has been added, it is being scanned by the device and being added to the media applications. Until that happens, the new content may not be visible in these applications (e.g. Photos and Video Center application) right away. The phone will need to find the files and create the thumbnails and other details. This information creation takes time and the processing may slow down the device. Your best option is to open Video Center and Photos and leave open in the background then check after a few minutes if the videos and pictures you loaded are already there before using your device.
The same applies if you insert a memory card with lots of content on it.
- Do Not leave the Photos or video center in background during this time.
More tips:
http://portablevideo.blogspot.com/2008/10/some-tips-and-other-info-for-n96.html
640K Should be enough for everybody
El_Loco Nokia Video Blog

Memory Problems with Adobe PDF iFilter for 64-bit

In preparation to rebuild my Windows Search Index, I installed the Adobe PDF iFilter for 64-bit on my system (Vista Business 64). When I finally rebuilt the index, I wasn't too surprised by what I saw happen, namely, the SearchFilter.exe process would kick in whenever I wasn't using the system and just eat RAM. One time I turned it on and it had allocated over 4,000 MB (and my system only has 4,030 MB available) so of course it was forcing all the other processes to hard fault (ie. everything was moving like molasses--for example, it took 20 minutes to put the thing to sleep). But I just let it do it's work, figuring that perhaps this was to be expected relative to the small library of PDF's that I've accumulated on my computer, ranging from LaTeX generated text files, to containers for hi-res scans. So, after a day and a half of basically not using my laptop, everything finally calmed down and I enjoyed the benefits of searching the content of my library from the Windows Start menu--for a short while.
However, to my dismay I've encountered the problem that this freezing of my computer would now occur after everytime I download a new PDF (in this particular case they were Google Books scans) and then left the computer to idle. Again, the SearchFilter.exe would allocate all of my RAM for itself and just push everything else onto the Virtual RAM, which means the SLOWEST possibly fetching you can get. I had to uninstall as this was making my computer unusable for 15-30 minutes after each idle. Everything is back in working order without the iFilter, but I would like to know if anyone has reported such problems on x64 systems. Obviously, I will also report the problem to Microsoft, since the search engine should certainly have the precaution to handle such memory problems.   However, it is a problem that is created by the Adobe PDF iFilter interacting with the Windows Search engine.

Hello,
We believe we have figured this out. It looks like it has to do with the length of the default folder location for the Adobe iFilter.
I was able to reproduce the issue and the following resolved it for me. See if this resolves it for you all as well.
Here is how to get Adobe Version 11 PDF filter to work.
1 . If you haven’t already, run the following in SQL Server:
Sp_fulltext_service ‘Load_os_resources’, 1
Go
--you might also need to run:
sp_fulltext_service ‘Verify_signature’,0 --This is used to validate trusted iFilters. 0 disables it. So use with caution.
--go
2. Stop SQL Server. (Make sure FDHost.exe stops)
3.
Uninstall the Adobe ifilter (because it defaulted to having spaces or the folder name is too long).
4.
Reinstall the Adobe iFilter and when it prompts for where to install it, change it to: C:\Program Files\Adobe\PDFiFilter
5.  Once the installation finishes, go the computer’s Environment variables. Add the following to the PATH.
C:\Program Files\Adobe\PDFiFilter\BIN
NOTE: it must include the BIN folder
NOTE: If you had the OLD location that included spaces, remove it from the path environment variable.
6. Start SQL Server
7.  IF you had an existing Full-text index on PDFs, drop the full-text index and recreate it.
8. You should now get results when you run sys.dm_fts_index_keywords('db','tblname') --Note: Change db to be the actual database name and tblname to be the actual table name.
Give this a try and see if this fixes yours.
Sincerely,
Rob Beene, MSFT

MS-6380 Memory Problem

I have a MS-6380E with the latest BIOS and chipset drivers. Athlon 1.5 Ghz processor, Geo4 Ti series card with 64MB ram and latest drivers and an SBLive Platinum 5.1 card, with the latest drivers. Windows XP Pro is the operating system. The system has 2 PC2100 256MB sticks of DDR ram on the board. This past weekend I tried to install a 3rd chip, PC2100 512MB chip to bring the system up to a Gig of ram. The system would reboot immediatly upon logging into Windows. I took the memory back and exchanged it for another. Installed it with similar results. I tried all three slots with the new memory and the two existing. No, I didn't try the new memory by itself. I finally go it to appear stable for a little bit but I also play Dark Age of Camelot and the latest symptoms were that the system would kick me back to the desktop as soon as I got to the initial "connecting" screen in Dark Age. I also had other odd behaviour with the additional ram installed like my modem taking longer to validate my connection. When I went back to the pre-existing configuration 512MB total, everything would stabilize. The DDR brand was Centron, I know it's not the same manufacturor as my other two sticks but I don't recall the brand on those. Also, just in case you needed to know Dark Age of Camelot is an MMORPG. I checked their tech section and nothing on this problem and their game. I've since returned the memory and have resigned to maxing out at 512MB tho the system specs say I can go to 3GB. I really like this board but am frustrated at the memory problem.

http://www.msi.com.tw/program/service/forum/search.php?boardid=
6380 covers a hell of a lot of boards
getting same make and model of ram is generally advisable to

Nokia C5-03 Low memory problems ( Other Files )

Please help. I have a nokia C5-03 the handset is showing phone memory is full. I have checked and uninstalled all unecessay applications. But problem is still there. when i check the phone memory it indicates that i have other files of 42mb installed and using phone memory. however i am unable to check what other files are installed or classfied as other files. Can you please assist me so i can know what these other files consist of or where they are located.

Hi Thetao,
I typed a more extensive reaction before, but it got lost when I pressed "post". Therefore I just respond to the main points that you mentioned (and some I found out myself).
Strange: I can't find the 40 MB Maximum User Storage on the Nokia website anymore (nor the 75 MB). But it sounds very familiar to me. It looks to me as if they removed this from the phone specs, also of other Smartphones by the way.
Yesterday, I deleted some small apps that I don't use (anymore) such as InternetRadio and I also removed Nokia email. Although the apps were below 2 MB together, this freed up over 7 MB of Phone memory (24 MB free now)! I think there were still some old emails stored in C: which I couldn't delete any other way. This helped me a great deal already but I tried your suggestions as well.
1. No map data or CITIES folder on C: 2. Switched messages memory to phone (and phone to offline mode) and I did indeed find a forgotten email account with 30 email messages. Not much but I had 24,7 MB free after that. Of course, I put messages memory back to the memorycard. 3. Used the free edition of Y-Browser to manually delete the cache folder. Not much data in that, but 25,1 MB free after that. Nice tool, with which you can reach folders that normally stay hidden! Used YBrowser to search all C: for files over 300 kB. Only 2 files: boot_space.txt in C:\ (500 kB, contains only the X repeatedly as far as I see, but is probably essential for the operating system) and C:\resource\python25\pyton25.zip (1 MB). It looks like an installation package, but I'm not sure if I can delete it. By the way: YBrowser hasn't made a shortcut in one of the menus. Only way that I found to start it was to look for it using the Phone's search function. Is there a way to make this shortcut myself?
4. Yes I did. No Images folder on C: anymore, nor other big files (see point 3)
5. I use Bluetooth for file transfer sometimes, mainly for installation files (such as YBrowser.sis, but I did this one via USB-cable). However, no big files are left on C: so I don't think I have this problem.
6. I tried to delete Nokia Chat yesterday as well (with the other apps), but it won't be uninstalled the normal way as it says "Uninstall cancelled" (not sure about the exact translation since my phone 'speaks' Dutch) Do you know if there's another way to get rid of this 3 MB app that I don't use at all?
I think I may have found an explanation and a solution for the memory problem while navigating. You mentioned the "memory in use" in the map settings. Above that option there's a slide bar for the % of memory that the navigation can use. Standard is 70%. I always thought this was about storage memory on (in my case) the memorycard. Another topic mentioned that this the working memory (so the RAM) that the navigation may use. Setting it to 70% means there's only 30% left for other apps that run in the background. The other topic states that this is nog enough so the slider should be set to for instance 30% for navigation leaving 70% free for "the phone". From behind my computer, navigation seems much more stable. I'll try this setting in my car soon and let you know how it works.
Thanks a lot for thinking along with me so far! There's already 25,1 MB of space, which is great since it was only 7 MB last Sunday. And navigation looks more stable. I'd appreciate if you have some more answers to my latest questions, but if not I think my phone will work a lot better already!
Regards, Paul

Memory problem with loading a csv file and displaying 2 xy graphs

Hi there, i'm having some memory issues with this little program.
What i'm trying to do is reading a .csv file of 215 mb (6 million lines more or less), extracting the x-y values as 1d array and displaying them in 2 xy graphs (vi attacked).
I've noticed that this process eats from 1.6 to 2 gb of ram and the 2 x-y graphs, as soon as they are loaded (2 minutes more or less) are really realy slow to move with the scrollbar.
My question is: Is there a way for use less memory resources and make the graphs move smoother ?
Thanks in advance,
Ierman Gert
Attachments:
read from file test.vi ‏106 KB

Hi lerman,
how many datapoints do you need to handle? How many do you display on the graphs?
Some notes:
- Each graph has its own data buffer. So all data wired to the graph will be buffered again in memory. When wiring a (big) 1d array to the graph a copy will be made in memory. And you mentioned 2 graphs...
- load the array in parts: read a number of lines, parse them to arrays as before (maybe using "spreadsheet string to array"?), finally append the parts to build the big array (may lead to memory problems too).
- avoid datacopies when handling big arrays. You can show buffer creation using menu->tools->advanced->show buffer allocation
- use SGL instead of DBL when possible...
Message Edited by GerdW on 05-12-2009 10:02 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Memory Problem With 4gb Crucial Ballistix and Asus M4A785TD-V EVO

motherBoard: ASUS M4A785TD-V EVO
bios Version :2005
Video: amd hd5750
Processor: AMD PHENON II X2 550 3.100MHZ
Memory: Crucial
Modele Memory: blt4g3d1608dt1tx0
Capacity: 4GB
greetings to all
i have asus m4a785td-v evo mobo. i ve bought 4 gb crucial ballistix ram today. it says on product its 1600 mhz and cl8 but it shows on my pc 1333 mhz and cl9. when i was searching for this problem i came across this topic: http://forum.crucial.com/t5/Crucial-Ballistix-gaming-memory/Memory-Probleme-With-8GO-Crucial-Ballistix-and-Asus-M4A785TD-V/td-p/9464 can i apply the same settings? how can i fix that? is it possible via bios settings? thx in advance and sry for my bad english. here is some screenshots:

I am not good at RAM setting but the 'Timings Table' shows there is XMP-1600 profile available so I believe it would be enough to turn on that memory profile in BIOS.

High RAM memory usage compared to other systems

I'm suffering with memory usage problems, only in open 2 tabs of facebook(it's only for example, any 'heavy' page freeze also) in firefox*(for example also, but this occur in chromium also) freeze computer.
I've 1GB of memory, it isn't big but also isn't very little.
I'm using XFCE with compiz (yes, compiz, since use a very lightweight openbox-based session doesn't help, then compiz...) when system start (after login) system is consuming 130MB approximately of RAM.
after 1 hour if close all open apps and see memory usage again consume is something about 350MB, "only solution" is reboot.
all applications(htop,free -m,xfce's system monitor...) that I've tried to monitor memory usage show above scenario, except the 'ps_mem' script in AUR.
in the 'ps_mem' script the result is following (with opera browser open, less memory offensive browser but I really prefer firefox):
Private + Shared = RAM used Program
88.0 KiB + 10.0 KiB = 98.0 KiB agetty
380.0 KiB + 34.5 KiB = 414.5 KiB sshd
408.0 KiB + 93.0 KiB = 501.0 KiB gpg-agent (2)
372.0 KiB + 142.0 KiB = 514.0 KiB avahi-daemon (2)
456.0 KiB + 60.0 KiB = 516.0 KiB systemd-logind
280.0 KiB + 261.0 KiB = 541.0 KiB sh
476.0 KiB + 103.5 KiB = 579.5 KiB xfconfd
476.0 KiB + 153.5 KiB = 629.5 KiB gvfsd
604.0 KiB + 34.5 KiB = 638.5 KiB systemd-udevd
588.0 KiB + 102.5 KiB = 690.5 KiB dbus-launch (3)
576.0 KiB + 119.5 KiB = 695.5 KiB sudo
668.0 KiB + 77.5 KiB = 745.5 KiB cups-browsed
620.0 KiB + 179.5 KiB = 799.5 KiB at-spi2-registryd
804.0 KiB + 67.0 KiB = 871.0 KiB htop
756.0 KiB + 131.0 KiB = 887.0 KiB gconfd-2
800.0 KiB + 126.0 KiB = 926.0 KiB upowerd
752.0 KiB + 183.5 KiB = 935.5 KiB xscreensaver
920.0 KiB + 85.0 KiB = 1.0 MiB cupsd
876.0 KiB + 241.0 KiB = 1.1 MiB gvfsd-fuse
692.0 KiB + 429.0 KiB = 1.1 MiB systemd-journald
880.0 KiB + 273.5 KiB = 1.1 MiB at-spi-bus-launcher
1.2 MiB + 125.0 KiB = 1.3 MiB udisksd
1.4 MiB + 486.5 KiB = 1.9 MiB dbus-daemon (5)
1.4 MiB + 533.5 KiB = 1.9 MiB panel-6-systray
1.5 MiB + 430.0 KiB = 2.0 MiB lightdm (2)
1.6 MiB + 572.0 KiB = 2.1 MiB xfce4-session
1.5 MiB + 683.0 KiB = 2.2 MiB panel-5-datetim
1.5 MiB + 706.5 KiB = 2.2 MiB panel-2-actions
1.6 MiB + 723.0 KiB = 2.3 MiB panel-4-systeml
2.0 MiB + 543.5 KiB = 2.5 MiB xfsettingsd
2.0 MiB + 579.5 KiB = 2.6 MiB systemd (3)
2.3 MiB + 815.0 KiB = 3.1 MiB emerald
2.8 MiB + 578.5 KiB = 3.3 MiB gnome-keyring-daemon (3)
3.2 MiB + 946.5 KiB = 4.1 MiB zsh (2)
16.1 MiB + -12144.0 KiB = 4.2 MiB polkitd
4.1 MiB + 465.0 KiB = 4.6 MiB notify-osd
4.5 MiB + 1.6 MiB = 6.2 MiB xfce4-panel
5.1 MiB + 1.2 MiB = 6.3 MiB panel-7-mixer
7.7 MiB + 1.4 MiB = 9.0 MiB xterm (2)
12.0 MiB + 636.0 KiB = 12.6 MiB opera:libflashp
24.3 MiB + -10774.5 KiB = 13.8 MiB Xorg
18.6 MiB + 1.1 MiB = 19.7 MiB gnome-do (2)
23.2 MiB + 2.4 MiB = 25.6 MiB compiz
168.4 MiB + 3.2 MiB = 171.7 MiB opera
320.1 MiB
=================================
as you can see in 'ps_mem' memory usage isn't nothing absurdly it's ok.
another example, this problem stop me make certain things, for example is impossible browsing in web while programming in eclipse, this is very uncomfortable.
other thing, this not occur in Windows XP, I can open more than 10 tabs in firefox, and eclipse open, etc...
any needing information, tell-me!
firefox*: with memory cache turned off in about:config
Last edited by hotvic (2013-08-12 17:42:21)

hotvic, could you please change the title to something more descriptive? 'memory problems' sounds like you have problems e.g. remembering / recalling things, which is not an Arch issue ;P
kenny3794 wrote:
I've had some limiting performance with browsers lately (Firefox and Chromium). I found it had a considerable cache size utilizing lots of fragmented space on my home directory. I cleared the cache and have since set a limit to the cache size of 30 MB for Firefox. Between multiple users across multiple browser sessions, I had at least 2 GB of cache data on my 10 GB home partition! So far (1 day), this has been helpful. Perhaps this could help you also?
Ken
OP is talking about RAM, not HDD space.

R9.2.0 on RH 7.3: Memory problem: Linux or the Installer?.

Having the following problem. Perhaps someone had the same. In that case, please help.
I have P4 with 1GB of RAM and 2GB of SWAP. No disk space problem. No shared memory problem. I installed the Client of Oracle9i (9.2R2) on redhat 7.3 (standard installation as Server). I have already noted here that with the Oracle installer running, the system uses almost all the RAM available (99.5% of the total), but at least it can conclude the installation. However it never uses the SWAP (100% free).
When tried to install the Database (enterprise or standard), the installation continues as long as there is RAM available. When reached 99.6% of the total used, it does not give any response (it hangs at 41% of the installation). Even here no SWAP portion is used.
Is there a problem of the kernel dispached with Rh7.3 in using the swap? does Oracle Installer really needs so much RAM? or am I missing something in the installation process of the Database? I am using jdk-1.3.1_04 downloaded from the sun website.
I would appreciate if you cc your response also to [email protected] I may have problem to access the Forum in the coming two days.
Thank you in advance.
Jama Musse Jama.

Check the Support Matrix (if you can find it) and it will tell you that Redhat and most Linux are not supported. I bought Redhat 7.3 Professional , a WinBook with lots of disk and speed and tried to get 9.2 to run on it. no way. It's not certified so it's not supported. Even though I explained that what I was trying to do was get rid of Windows XP and move to RedHat 7.3 and would they send me Oracle 9.2 when it was available. I got the CDs 3 days later. but it won't work. Now I am left with the choise of buying the 9AS package or going backt to XP.
I do not thing that Oracle is living up to the spirit of LINUX. They say Linux but they mean a very specific subset. Who do they think they are, Bill Gates?

HI, I HAVE A MacBook Pro 2.3GHz dual-core Intel i5 AND I WAN'T TO UPGRADE THE HARD DRIVE UP TO 750GB AND ALSO THE RAM MEMORY TO 8GB. WHAT SPECIFIC MODEL OF HARD DRIVE AND RAM MEMORY SHOULD I BUY??? THANKS

HI, I HAVE A MacBook Pro 2.3GHz dual-core Intel i5 AND I WAN'T TO UPGRADE THE HARD DRIVE UP TO 750GB AND ALSO THE RAM MEMORY TO 8GB. WHAT SPECIFIC MODEL OF HARD DRIVE AND RAM MEMORY SHOULD I BUY??? THANKS

No need to type in all caps - we HEAR you!
I would take a look at the internal drives offered by both Crucial (click the link "Internal Hard Drives Now Available") and OWC. I would stay away from Western Digital drives as they seem to have problems on a number of Mac models.
You can also shop for RAM at Crucial and OWC - just select the System Scanner tab at the Crucial website to find out which memory is right for your machine.
Good luck,
Clinton

InDesign CS4 memory problems

I have had memory problems with InDesign CS4 (and also with Photoshop CS4) for about a year now. If my file has a lot of pictures (100+) at some stage I get error message "Out of memory" . In the beginning it just have problems with redraw pictures (half of picture stays black), but also export to pdf is halted by same message and printing to file also. No problems in the beginning of large files or with files with text only. At one point InD just has enough and starts to behave like a ... Only solution is to export InD CS4 file as INX and continue to work in CS3 (but it takes a long time to match the text flow because textengine works differently). It's not monitor, because I have changed monitor during this year (from LaCie 22 blue IV to EIZO 27"). It seems that it's not video (NVIDIA GeForce 9800 GTX, 512 MB) also, because everything functions normally with CS3. I know, that it's not a proper video card for my work, but one likes to play Bioshock sometimes... Something strange happens with Photoshop CS4 also when I work for a long time without shutting down the program. After about editing 60+ pictures Photoshop CS4 begins to slow down (specially with using clone tool).up to impossible to work. You just have to wait while the cursor is dragging itself to right place an picture is redrawing itself. Seems like memory cannot empty itself and gets overloaded when working with CS4. No problems with Photoshop CS3. One cannot notice anything with small files. I can work with CS3 but there are features I would like to use in CS4.
Have anyone experienced anything similar?
Claudius
Win XP SP3
4GB RAM
video NVIDIA GeForce 9800 GTX 512MB with latest drivers
CS4 and CS3

Having exactly the same here. 16 Gb of ram in an 8 core 64 bits Vista system. Absolutely no infections on my system. Having great troubles getting my work ouputted.
I'm making an overview with 50 cards with pictures in them and bevels on the edges, dropshadows. It might be heavy but it is a normal question from my client.
I don't care if transparency is difficult for Adobe to handle. They shouldn't make it public if it is not properly tested. I am now so far as to make the composition in photoshop ( if that works)
What I thought was the problem is that I originaly placed indesign files in frames. But there is a great script out there on www.automatication.com to convert that in editable object again. Works great so check that out. But this didn't solve my problem. The effects used in these items are the memory consummers and Adobe is not freeing the memory properly.
Advise to Adobe: check also to dropshadows feature because this is not scaling up or down with the rest of the effect.
I'm am writing a realtime 3D renderengine here, if CS5 is not working fine, I might digg in to this one as well, getting a bit tired of waiting for properly working software.
Jaap Clarenburg
[email protected]

PDA RAM memory usage

Hi all,
We have created a PDA application running on SAP Mobile Infrastructure 2.5 Service Pack 18 Patch 1 on Windows Mobile 5 and Windows Mobile 2003 SE.
Problem description:
The problem is the RAM memory size. For WM 2003 there is no problem because there are enough PDA's with 128 mb RAM size, but the problem is there is no normal PDA running on WM 5 with 128 mb RAM size. There are only devices with 64 mb RAM.
So we are having some problems with the RAM size, and I want to watch what is in the RAM and I want to see the usage of the RAM easily when I use my application. I can switch to the Settings --> Memory and see the values, but this is not reliable and I only see the usage and not what's in the RAM.
Questions:
- Is there a tool to watch the memory and what's in the memory?
- Can someone give me some information how we can store less in RAM and more in ROM without getting a slower application?
Thanks in advance,
Bart Elshout

hi bart,
had you tried profiling you application? profiling will help you in looking which
portion of the code was consuming a lot of RAM and time.
some common ways to counter heavy application
1) lazy loading
this is very effective in a sense that only the classes required for certain
functionalities are loaded and instantiated. this can be realized by using reflection
and customized class loaders.
2) avoid caching smartsync data
when using smartsync, i don't recommend caching of your syncbo data. the lower
layer already have a cache (esp fileIO).
3) avoid rewrapping if possible
wrapping a syncbo or row into another class will make your class instance bigger.
and caching the fields in it, again will also consume some RAM.
that's only for the part of the data. now you have to consider your UI also. are you
using any UI framework?
regards
jo

N8 - Ram memory

Ive got a problem with the Ram Memory on my Nokia N8.
When i switch the phone on i have 115mb free and 131 used, this is fine and the phone works quite quickly.
However over the next few days i lose about 20 to 25mb a day resulting in less than 50mb free after only a few days which makes the phone very slow and not responsive.
I use the phone for the same things every day, calls, texts, emails, playing videos / music, taking photos and a bit of internet surfing. After closing an app the free memory goes back up but obviously something is happening to use the memory and not give it back!!!!
Id like to know what is using this memory and is there anything i can do to stop it other than switching the phone off and back on every day??
I have no such problems with my 808 so im well confused as to what is happening!

Perhaps it is Anna. It is always recommended that one updates to the latest version of firmware, as it brings reliability, performance and functional improvements. Belle and Belle Refresh greatly increase the performance and stability of the phone and make it much prettier. I'm sure that if you update, the RAM problem will go away.
But the downside to firmware updates, as you have also stated,is that some of your old apps may not work, as compatibility is not guaranteed. In these cases, you will need to contact the app developer themselves to ascertain the status of the app and its compatibility.
In conclusion, the choice is up to you. I have Belle Refresh on my N8, and i'd take that any day over losing compatibility with some apps.

Sound Problem Plus Memory Problem

I've also posted this same issue at the EVGA website with no help what so ever yet. Also if it's ok I'm having the above mentioned memory problem that it probable not related but if anyone does have good input I would love to hear. Hope this doesn't break any rules, didn't see anything in the listed rules thread. So here it goes.
Ok I'm having a few minor but very perplexing and annoying problems. I have recently built a new rig to include the following.
Windows 7 64 bit Home Edition
EVGA P55 FTW Intel P55 Socket LGA56
Intel Core i5-750 2.66Ghz 8M LGA56 CPU
Corsair Dominator 4GB DDR3 PC2800 (2 x 2 GB sticks)
Ultra LSP750 750w Power Supply
Seagate TB Serial ATA HD 7200/32MB
Cooler Master HAF 932 Full Tower Black Case
Galaxy GeForce GTS 250 52MB PCIe x2 (SLI Setup)
BFG - NVIDIA GeForce 9800 GT GB GDDR3 PCI Express Graphics Card (Physx Setup)
PROBLEM ONE:
This one I had a lot less that I was able to actually try because it just confused the crap out of me. So I started by going to test my sound. I'm running an optical cable from the on board sound port to back of my sony surround sound system. I get sound from my left and right channel but nothing from the center, rears or sub. So figure no biggie just need to change the configuration from 2 speaker stereo to 5. surround sound. Guess what... the option isn't there? WTF? A sound card with an optical port with no 5. support? So went online found the drivers for the sound on the mother board and tried reinstalling thinking maybe somthing was wrong with the drivers on the CD. Well it still didn't work. So I figured what ever, I got an external sound card that I know works with Windows 7 since it was on other desktop and hooked it up. Its a Creative - Sound Blaster X-Fi Surround 5. External USB Sound Card. Well it installs fine and I go to test it. Yep you guessed it! Still only sound from the left channel and the right channel with no option for surround sound. So I was able to find updated drivers for that and ran em. Well now I have an option for Surround sound with side speakers only no rear. Oh but it doesn't really matter because the left and right channel are still the only ones able to produce sound. And yes the speakers work I turned on my X-Box 360 hooked up to the same speakers and LCD tv and played COD4 with full sound working fine. So something else has to be happening I just have no idea.
PROBLEM TWO:
The second problem was with the memory. Everything booted fine but it initial only detected 2 GB. By the way I had them installed in slots and 3. So I shut down and popped em out checked the copper connectors everything looked fine and reseated the chi
ps.
This time during the boot up I checked the BIOS. It saw all 4 GBs of memory. Continued into Windows. Windows now saw all 4 but only .99 GB was available. Now the only other time I've seen anything like this was with on board video sharing the memory, and even then it wasn't half of the systems total memory. I then tried shutting down and putting the chips in 2 and 4 just see what would happen. Well I got an EA post error on the LED, couldn't even boot. So I figured o'well power down completely and tried to run the memory in 2 and 3 to run it out of dual channel. I was able to boot but still had the same issue. .99 GB available and still saw all 4. At this point it was just getting silly so I figured ok I'll download the new BIOS with my laptop, burned it to a CD. Booted the desktop and ran the BIOS flash. Update seemed work fine, honestly the BIOS didn't look much different and I didn't take note of the previous version before I did it so I can only assume it worked. However it did not fix my problem. So I'm still stuck at windows seeing 4 GB of memory with only .99 available.
Anyway... I'll keep trying to get this working and hunting around online, but I'm really hoping you all have some ideas. I'll be trying to call EVGA today for some help too and possibly Corsair. Thanks in advance for the help!

Hello,
cannot help with the sound problem.
For memory, I've got almost the same thing but with 4 sticks of 2gb and only 2 detected on an ASUS P7P55D deluxe.
Bios was my issue but I needed to do this (but with pairs of sticks instead of sticks) after the bios update to finally get my 8gb under windows:
Make a clear cmos. Then boot the computer with only one stick of ram in the port .
If everything is fine, turn off and add the other port of the same color for dual channel.
If it does not boot with the 2 sticks in the port of the good color, try to switch ports again. Maybe one stick is dead?

N96 ram memory problem

Similar Messages

Maybe you are looking for