N96 screen problem. slider only works in normal po...

hi, is there an easy fix for this problem? the phone seems to show the correct display when in the "normal" postition or when slid open to reveal the media keys but as soon as you open the slider to reveal the numerical keypad the screen kinda freezes and occasionally shows vertical lines.  occasionally when switched on there is a white screen with vertical lines. *#7370# and *#7780# didn't help. it says s'ware is 11.018 and will not upgrade, is there a newer version? please, no replies saying you have the same trouble or telling me to take it to a nokia service center as that is what i'll do if there's no easy fix!! all i want to know is is it a "slider ribbon" etc. thanks

It could probably be the ribbon as you mentioned, probably for the screen. A hardware issue needs repairing as you already know. Good luck at the care point.

Similar Messages

  • BATTERY PROBLEMS: Laptop Only Works With Charger

    **My laptop now only works if it is connected to the charger. The second the charger falls out, the laptop shuts off.
    ** I have a white macbook..
    **Any advice??**
    Thanks

    I have a similar problem. Once i disconnect my macbook, with the battery charged, it stays one for awhile then it just shuts down. then i turn it back on and sometimes shuts down in middle of the start up screen =/. its like the random shuts are coming back or something...its really getting annoying.
    recalibrating or resetting the PRAM or whatever isnt gonna do anything

  • Screen suspend + gnome only works the first time

    Hi all,
    Being new here , i hope i'm posting in the right place.
    I've just installed arch i686 , everything is running like clockwork, nearly everything actually.
    i'll try to explain the problem shortly.
    i've set screensaver to start after 1minute and the screen to suspend after 2 for testing. After a boot, these settings works like a charm, moving the mouse, enter password and go on working. After that, after 1 minute idling, screensaver starts but the screen never switch off. If i open the gnome application to manage power, re-apply my settings, it will work but just the first time.
    It's not a big issue, i know that i've just have to re appply settings each time i leave or switch off monitors manually but it's a bit annoying, and i'm curious , i'd really like to solve this little problem. As i'm not a linux guru at all, i don't know where to start searching, any clue will be greatly appreciated.
    Thx in advance.
    Jojo.
    P.S.: sorry if it's a bit confused and for my english .

    Thx for your answer loafer,
    i'm still "googleing" to find a clue. I'm sure the answer is simple, one day, i ll find it.
    I'm still looking for clues anyway.
    Thx in advance.
    Jojo.

  • Powerpoint Master Slide only works on first 600 slides

    I have a presentation with 3600 slides in PowerPoint 2010 and I'm trying to use a master slide to change the font color and background color of all slides. I've created a master slide and have changed the background color and all the slides did change.
    However when I change the font color only the first 600 slide changed there font color. I changed the font on all the different levels of slides in the slide master.
    why767

    Hi,
    In PowerPoint, the Slide Master is the template for your presentation.  If you make a change to the Slide Master, it will change for your entire presentation. However, if you have already applied formatting to one of your individual slides, it
    will not follow the guidelines of the Slide Master.  He had changed the layout and formatting on some of his individual slides, and then made changes to the Slide Master, thinking that the changes would be applied to the slides that he had edited
    individually.  
    To reapply the Slide Master formatting to several slides at once, you can select multiple slides and following the same steps from Home > Slides > Reset.
    Hope it can be helpful.

  • Nivo Slider Only Works in Chrome

    Hi - hope someone can help.  I have set this up for a client in Dreamweaver - it's the Nivo slider.
    http://designerandpublisher.com/nivo-slideshow/demo/demo2.html
    It seems to do the fancy transition in Chrome but it does not do the transition in IE.  It just changes from one slide to another with no fancy transition.
    Does anyone know what this might be and have a fix?
    Thanks, Deaf Guy

    Hi, thanks for your reply.  I fixed that:
    http://designerandpublisher.com/nivo-slideshow/demo/demo2.html
    But are you sure you're seeing what I'm seeing?  Take a look at this video:
    http://designerandpublisher.com/nivo-slideshow/video/nivo.html
    I recorded my two browsers with Camtasia.  From start to :14 that's the IE browser I'm seeing.  The change between slides happens abruptly - no fancy change.
    Then from :15 to end is Chrome; you'll see that cool transition between slides like it's supposed to (Nivo calls it the "rain" effect).
    Any ideas?

  • Scanner problems LIDE60, only works with XSane, but Xsane is buggy!!

    Hello everyone, I'm trying to get my LIDE 60 scanner working properly with Arch.
    Xsane work OK with it, but it doesn't seem to work with anything else (I installed gnome-scan and sane-pygtk from AUR).
    Both these apps do not see it at all.
    I like XSANE, but there is a bug with it: I cannot select the area I want to scan in the preview area.
    When I try to drag/enlarge/move the selection box, it dissapears and goes elsewhere on the window...
    (I would PREFER fixing Xsane, but in the meantime, would like to try other apps)
    Here is my LSUSB output
    [charles@amdx2 ~]$ lsusb
    Bus 002 Device 002: ID 045e:009d Microsoft Corp.
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 001 Device 004: ID 04a9:10c4 Canon, Inc.
    Bus 001 Device 003: ID 04a9:221c Canon, Inc. CanoScan LiDE 60
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    the output from scanimage -L
    [charles@amdx2 ~]$ scanimage -L
    device `genesys:libusb:001:003' is a Canon LiDE 60 flatbed scanner
    genesys IS enabled in /etc/sane.d/dll.conf
    Here is the output from flegita/gnome-scan
    as you can see it seems to be ignoring the scanner it finds...
    "see line ** (flegita:11223): DEBUG: SANE device genesys:libusb:001:003 failed or ignored"
    Please, please HELP I'm not totally new... just been on Windows for a couple years,
    but i've been installing Linux on and off to try. (so far, Arch seems a keeper. take a while to install
    but it's great!)
    [charles@amdx2 sane.d]$ flegita
    ** (flegita:11223): DEBUG: gnome-scan-init.vala:33: Initializing GNOME Scan 0.7.1 for flegita
    ** Message: gsane-module.c:53: SANE version is 1.0.20
    ** Message: gsane-module.c:53: SANE version is 1.0.20
    (flegita:11223): GLib-GObject-WARNING **: Two different plugins tried to register 'GSaneBackend'.
    (flegita:11223): GLib-GObject-WARNING **: Two different plugins tried to register 'GSaneScanner'.
    (flegita:11223): GLib-GObject-WARNING **: Two different plugins tried to register 'GSFileBackend'.
    (flegita:11223): GLib-GObject-WARNING **: Two different plugins tried to register 'GSFileScanner'.
    (flegita:11223): GLib-GObject-WARNING **: Two different plugins tried to register 'GSFileOptionFilenames'.
    (flegita:11223): GLib-GObject-WARNING **: Two different plugins tried to register 'GSFileFilenamesWidget'.
    /usr/share/themes/Darklooks/gtk-2.0/gtkrc:181: Invalid symbolic color 'tooltip_bg_color'
    /usr/share/themes/Darklooks/gtk-2.0/gtkrc:181: error: invalid identifier `tooltip_bg_color', expected valid identifier
    (flegita:11223): GLib-CRITICAL **: g_utf8_strlen: assertion `p != NULL || max == 0' failed
    (flegita:11223): GLib-GObject-CRITICAL **: g_object_new: assertion `G_TYPE_IS_OBJECT (object_type)' failed
    ** (flegita:11223): CRITICAL **: gnome_scan_scanner_selector_on_scanner_added: assertion `new_scanner != NULL' failed
    (flegita:11223): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    (flegita:11223): GLib-GObject-CRITICAL **: g_object_new: assertion `G_TYPE_IS_OBJECT (object_type)' failed
    ** (flegita:11223): DEBUG: SANE device genesys:libusb:001:003 failed or ignored
    ** (flegita:11223): DEBUG: gnome-scan-dialog.vala:400: job status updated to unconfigured
    ** (flegita:11223): DEBUG: gnome-scan-dialog.vala:400: job status updated to unconfigured

    BTW, this is on a fresh install of Arch done yesterday: Linux groovy9 3.11.4-1-ARCH #1 SMP PREEMPT Sat Oct 5 21:22:51 CEST 2013 x86_64 GNU/Linux
    For a plan B, if there's a straightforward way to custom compile my own kernel, I'd like to try a slightly older one to see if I have better luck.  This same model of scanner is working fine on a 3.5 kernel, for example.
    Last edited by groovy9 (2013-10-09 21:34:22)

  • Full screen background slide show

    Trying to create a full screen background slideshow (workarround).
    But when I create a widget slideshow 1920px pinned to the background everything is working fine until a change some settings.
    Like No counter. Muse then adapt the size of the widget to far more smaller?
    More people this problem?
    René

    Here's a similar thread that should most likely answer any queries you may have in regards to getting a full screen background slide show working using a jQuery plugin - http://forums.adobe.com/message/5330925.
    Thanks,
    Vinayak

  • Siri only works when "Raise to Speak" option is activated

    Hello:
    I have iOS 7 installed in my iPhone 5 and I have the following problem:
    Siri only works when "Raise to Speak" option is activated. When I change this option and I try to talk with siri I do not receive any answer.
    Please, could someone give me an idea to solve this problem!
    All the best
    jc

    I am having this same problem.  The problem appears to be related to the microphone and must be a softwear issue.  The microphone works with other apps, and works when making and receiving calls.  It also works when I "raise to speak" to Siri, but it does not pick up any sound when I attempt to talk to Siri by holding the home button, or when pressing the microphone button on screen when in the Siri interface.  Is it possible that holding the home button to talk to Siri is somehow not activating the microphone?
    I should also note that I have tried turning the phone off and back on.  I have tried the reset by holding the home button and the sleep/wake button, and I have even restored the phone in iTunes, although I did not set it up as a new iPhone, because I am not interested in losing app data, call history, messeges, etc.

  • My screen saver isn't working on my Apple Tv

    This morning when I went to play music off my Apple Tv, I saw there was a update for the current software. (6.1) After I did the update, I noticed my screen saver pictures don't show up. But my music works and everything but when my screen saver is just a black screen of my tv.  I have tried everything I can think of.  I always send photots from my MacBook Pro and sync them.  But it won't even pull up anything as a screen saver of anything, I have tried my photo stream, flowers, (which was a defualt), and also just my iPhoto pictures. I don't know what generation is it but I have had it a year and a half and it has worked great for as hard as I have been on it using it all the time.  If anyone has any advice for me it is greatly appreciated!!!!

    Seemingly the screen saver will only work with images that are on the Apple TV. Thus it basically only screensaves synced images. If you don't have any (i.e. you're only streaming) there are no images for it to show. You need to change the screensaver option from 'cover art' to something else.
    This is dumb and I hope they fix it.
    [The other dumb part of the screen saver is the way it blows up lower res cover artwork to max size. Surely it wouldn't be too hard to check the resolution of the cover art and not show it any larger than its max resolution]

  • Full Screen Problem - Dual Monitors - Hulu Desktop

    I am using Hulu Desktop with dual monitors. I keep Hulu on full screen on monitor #2. I use monitor #1 for computer use, etc.
    It is IMPOSSIBLE to look at an app in full screen mode on monitor #1 and keep my Hulu full screen in monitor #2 at the same time. So if Hulu is playing and I open up a full screen Mail.app...the hulu screen (mon. 2) just shows that grey background.
    Apple NEEDS to add a way to make the #2 monitor immune to the spaces functionality. That or make a way so that an app can stay on top of ALL SCREENS not just user-created ones.
    I have seen people suggest the, "Right click the app in the dock and choose all screens" but that ONLY works for user-created desktops. It won't make the app be full screen over Mail, iCal, Address book, etc when they make their own spaces window.
    Help! :-)\

    That's annoying, isn't it?
    It's why I quit using iTunes in full screen.
    I play my movies in VLC and "maximize" the window so I can keep working on the other display. I don't knwo of any other way aorund it.

  • Torch 9800 touch screen only works when slid open.

    Hello everyone, this is my 1st post but I've been lurking the forum for some time. I'm running a Torch 9800 on AT&T right now on v6.0.0.600
    This is what's happened with my phone: as the subject notes, my touch screen only seems to work when I slide open the phone.
    What I've tried so far that doesn't work: rolling back software, rolling the software forward again, hard resets, soft resets, adjusting intervals for the touch screen.
    The weird part is that I saw an older thread that had the exact opposite problem(touch screen only worked when the phone was slid closed). I have a level/ruler app for my phone and it's showing that the phone knows when it's tilted/angle/orientation. I've also closed the phone, opened it slightly (about the width of my thumb) and it stays horizontally oriented + I'm able to use the touch keyboard that way.
    Anybody have a suggestion as to what I can try next to fix this? I haven't gone so far as to just go and get a 9810 yet, but i'm considering it.

    Thanks for the post.
    Has it in anyway fallen or pressed hard at any point? It could be the belt, which would just need you to go with it to a certified repair center and get it secured.
    Twitter: @IAmBenGiey | Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Try my apps:
    The Ultimate Currency Converter and T2G - BloGFeed

  • Phone 5 freezes at lock screen but control centre and answering calls woriks, to work again i should press lock button then it works normally and freezes again if i leave it for 1min or less icant understand what problem isit,restored in dfu,normal no use

    phone 5 freezes at lock screen but control centre and answering calls woriks, to work again i should press lock button then it works normally and freezes again if i leave it for 1min or less icant understand what problem isit,restored in dfu,normal no use i still have problem please try to sovle it

    i tried it but no use
    i restored it as new device and kept it idle over night but no use

  • N96 Screen or firmware problems

    i just bourght a n96 about 2 weeks ago... it was working fine and all then after a few days it started to run a bit slow like when i slide the screen to change from horizontal screen to vertical screen... then eventually when i ran out of battery i charged it.. now when i turn it on it boots fine but when i have the screen in the normal position where i can use the number keys the screen freezes untill i slide it into horizontal mode.
    i can only use the fone when its in the horizontal slide mode... 
    everytime i slide it into the normal screen it freezes untill i slide it back
    i updated the phone and all the firmware
    ive tried charging the fone for hours and hours too see if it was a power issue.
    but still i cant use it with the keypad ect in its normal screen.
    any solutions? i am going to take it into the store but im checking on here first 
    cheers

    Try a format *#7370#. All data saved to phone will be erased so make sure that you have backed up all important files
    Nokia n95, 5800 and n97

  • I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!

    I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
    I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
    Thanks!

    Links should not create any problems in Keynote.  If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
    Try this repair for Keynote,  ensure you complete all the tasks and in the order shown:
    1 
    delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
    2 
    empty the trash:  Finder > Empty Trash
    3 
    Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
    When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
    If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
    4  
    Let the Mac fully boot up, it will take longer as the OS is repairing the drive
    5 
    when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click  repair disc permissions
    6 
    when complete, restart the Mac normally, Apple menu > Restart
    7 
    install Keynote from the Mac App Store
    let us know if this helped

  • MacBook pro will not boot. I get the gray screen, an apple icon and spinning wheel. Tried to start in safe mode but get the same screen. The only thing different was that I loaded the zedge sync app yesterday. Now getting this problem.

    Macbook pro will not boot. I get the gray screen, an apple icon and spinning wheel. I tried to start in safe mode, but get this same screen. The only thing different is that I added the zedge update app to do a sync for adding ringtones to my apple cell phone. How can I get a good boot. I am fairly new to apple computer.

    Reset PRAM: http://support.apple.com/kb/PH4405 and then try a normal boot.
    Run the Startup Manager to select Startup disk:  http://support.apple.com/kb/HT1310
    If those did not work your disk may be sick or dying.  The top priority at this point is to make a backup copy of your data.
    Check the health of the disk.  Boot in Recovery Mode (Boot, Command-R).  Run Disk Utility.  Click on the upper left disk icon.  Does the S.M.A.R.T. status say “Verified”?  If not the disk/SSD is unhealthy and needs to be replaced.  Even if it does not show “Verified” you can still attempt a backup. 
    Click on the icon indented below, usually called “Macintosh HD” and Verify Disk.  If it finishes with a green “OK” message then all is well with the disk.  If it shows errors in red then you have found a problem to address once the system is backed up.  Do not attempt software repairs until you have secured the data.
    If the disk will not show up at all in Disk Utility as your ran the tests above then it may be dead or it may have a bad internal SATA cable.  A trip to an Apple store for confirmation would be in order.
    If you have an external disk drive you can use as a backup drive then do so.  If not Google “Hitachi USB 3.0 external hard drive 1TB” to purchase one or go to a brick-and-mortar store (including an Apple store) to pickup one.  Any 1 TB external drive will do.
    Assuming it is still breathing you can try to recover the data without booting from the sick disk. 
    Reformat the external disk.  (This will erase all data on the external disk.)
    Boot in Recovery Mode.  Start Disk Utility.  Plug in the new disk.  Select it’s disk Icon (the second one down, left justified). Select the Partition tab.
    Partition Layout > Single Partition
    Name: Emergency Recovery 1 (or whatever name you wish to use)
    Format: Mac OS Extended (journaled)
    Options… > GUID Partition Table > OK
    Apply
    Select the Restore tab.
    Drag the old system volume (Macintosh HD) to Source.
    Drag the new disk volume (Emergency Recovery 1) to Destination.
    Click on Restore.
    It may take a long time for the backup.
    If that will not complete post back for other emergency data recovery methods, including those from a brody.
    If the backup succeeds, use the First Aid tab in Disk Utility to select the old volume (Macintosh HD) and Repair Disk.  If it does not finish with a green OK message try to repair it once or twice more.  If it repairs with a green OK message, will it boot normally?  If not, boot from the Recovery Partition and reinstall OS X.
    If it is still not healthy, post back for further instructions.

Maybe you are looking for