N96 So Slow to open messages and send

Please Help
Had p[hone since November and sometimes applications are slow to start but generally excellent phone till today ARRRGGHHH!
The phone just hung in "No Mans Land" several times so took out battery, sim card and emptied all texts (appx 500). Will open messaging now but topen a message takes about two minutes!
Any ideas please?
Solved!
Go to Solution.

Hi Barry,
I can suggest is a firmware update, if you are not already on the latest which is 12.043. If you are already on the latest version you could try a reset. Before you reset you will need to backup your phone because the reset could wipe out all your data. Try the following resets, the first and then the second if the first does not work.
Always remember to backup your phone before performing resets as your data may be lost.
First try these
*#7780# - Restore factory settings - resets all the settings to the default
*#7370# - Reformat your phone
Personally I'd leave it for a few days to see if the problem resolves itself before I attempt the resets, which can be a bit of a pain.

Similar Messages

HT5037 I followed the above instructions and after I choose the library I want to upgrade and hit continue it wants to open my iPhoto to convert, when I click yes it just gives me the original message and sends me back to this page. Am I missing something

I am trying to get photos off of my airport time capsule back up onto my new macbook pro. I followed the above instructions and after I choose the library I want to upgrade and hit continue it wants to open my iPhoto to convert, when I click yes it just gives me the original message and sends me back to this page. Am I missing something?

Is your Time Capsule being used for your TimeMachine back up? Or is it simply being used as an external hard drive?
To use a TimeMachine back up you must first restore it
LN

Why mine iphone 5c cannot normal receive message and send message to another phone? I also cannot receive any message form Digi Centre~ I am form malaysia~

Why mine iphone 5c cannot normal receive message and send message to another phone? I also cannot receive any message form Digi Centre~ I am form malaysia~

Sorry, forgot to add this and I can't find the edit button.
-I am using build: 9A406
-One funny thing I want to add too: when I put the iPhone in the Apple dock and connect it with my PC, I open iTunes and select my phone. There you can see the build, software version,.. But after telephonenumber it says N/A: not applicable.. Something I only just noticed. I'm pretty sure my number was displayed back in Nov. when I first got my iPhone 4S.
And the very last thing: Most of the time I have a very good signal, 4 out of 5 bars. It is only rarely that I have only 1 or 0 bars.

Can ipad open, revise and send word docs?

Can Ipad open, revise and send word docs?

Depends on what you're doing; SL doesn't really support Office docs directly. In Snow Leopard, TextEdit can open Word docs, albeit with little fidelity for anything beyond text. Try iWork if you need to really work with Word docs (note that even then it's an import/export process and not native support).

I have an iMac os x 10.4.11 but I am having problems with Flash Chat. About 3 weeks ago, I can no longer type in messages and send them in any Flash Chat situations. I have uninstalled and re-installed Flash Player 6 times but still have the problem.

I have an iMac os x 10.4.11 but I am having problems with Flash Chat. About 3 weeks ago, I can no longer type in messages and send them in any Flash Chat situations. I have uninstalled and re-installed Flash Player 6 times but still have the problem.

I have an iMac os x 10.4.11 but I am having problems with Flash Chat. About 3 weeks ago, I can no longer type in messages and send them in any Flash Chat situations. I have uninstalled and re-installed Flash Player 6 times but still have the problem.

Please help me how concatenate all the error messages and send it as out parameter value.

Hi Experts,
Please help me how concatenate all the error messages and send it as out parameter value.
Thanks.

Agree with Billy, exception handling is not something that is done by passing parameters around.
PL/SQL, like other languages, provides a suitable exception handling mechanism which, if used properly, works completely fine. Avoid misuing PL/SQL by trying to implement some other way of handling them.

Unable to send messages and "send" function is unavailable when replying to a message.

I m unable to send messages and "send" function is unavailable when replying to a message.
My device is BB device model is 7290
IT Support Analyst

Typically this means a corrupt xxxxx [CMIME] service book. Go to Options > Advanced Options > Service Books. Highlight the xxxxx [CMIME] service book and press delete. Wait 30 seconds click the track wheel and select undelete. If this doesnt work you can have the service books resent by your BES admin (if BES connected) or send them to yourself from the BIS website (if its a BIS account).

How to set up the iPhone 5 so that I can receive iMessage (incoming messages) and send text messages (outgoing) every time?

How do I set up the iPhone 5 so that I can receive iMessage (incoming messages) and send text messages (outgoing) every time? I have limited internet quota but unlimited sms!

Thanks!!
The reason I don't want to set it off is because I want to let others send me iMessage - most people prefer that according to their plan.
How do I bring this request to the hands of the people doing the ios updates? Maybe they could work on this for the future...

CS5 Extremely Slow to Open, Save and Print

We have recently installed InDesign CS5. We are experiencing extreme slowness when open, saving and printing documents. We have installed on Windows XP Service Pack 3. I have upgrade to 7.0.3 to no avail. Has anyone else experienced this? If so, were you able to resolve it?

pooh071567 wrote:
I can create and save new CS5 files fine both to the desktop and the network. I tried copying our existing files to the desktop to see if there was a network issue. It is also extremely slow to open from the desktop. I'm beginning to wonder if it is our documents. They were created in CS3. I tested one that was 2 pages of text with a few graphics. It took a considerable amout of time to open. I made some edits to it and saved it to the desktop. I would have thought that saving it in the new CS5 format would have improved the slowness. It did not.
I was on a support call with Adobe yesterday for 2 1/2 hours. To say it was extremely frustrating is an understatement. They have asked me to re-download the install, uninstall and reinstall. I did not re-download, but did uninstall and reinstall from the EXE we have. Slowness is still an issue. I'm inquiring regarding our antivirus, however, I don't think that is the issue. We were able to open files in CS3 just fine. It seems to be since the upgrade to CS5 that we are having issues.
Whenever you contact anybody's tech support:
* Get the name of the tech, and any other identifying info
* Get a case number
* Explain your question/problem briefly; begin by saying, "I'm going to explain my problem briefly. Before we spend lots of time on it, I'll ask you if you have expertise in this particular area. I don't mean to be rude, but if you don't have sufficient expertise here, we'll both waste our time. If this isn't OK with you, I understand; we all have strong and less-strong areas. If you don't have the expertise, please give me the name of someone who has the the greatest amount of the expertise needed to solve the problem, and then transfer me to that person. If you can't do this, please give me your supervisor or manager's name, and transfer me to that person. Would you like me to state my problem briefly, now, so that we can go ahead?"
* If you have the slightest inkling that you're being told to do wasteful things like re-download, uninstall and reinstall, ask the tech, "Is this a known fix for my problem? If it's not, why are you asking me to do this?" (Some techs suggest these steps to get you off the line and move on to another call, either because their call clearance rate is slipping, and that's how many are paid. Others suggest them because they don't have the expertise to solve the problem.)
* If you're transferred to a manager or supervisor, summarize why you asked for him or her. Then, ask the manager to transfer you to the highest-skilled person for the problem you'll now explain briefly. If the manager/supervisor balks, ask for the highest-level person in the department, or the division. IOW, ESCALATE (use that word, when asking to change people.)
It's not the customer's job to teach customer service folks to serve customers, but we're the best ones to teach them now NOT to do it.
Now, if you don't have the expertise to do these things, please give me the name of your superior, so I can escalate this matter, and then connect me to that person!
Seriously,
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

When I load email messages from one Thunderbird program to another in the outbox, then I can send them all in one go. I have to re-open each message and send it

I have two computer terminals. One is connected to internet. THen I have another with an internal network set-up, not connected to internet. Thunderbird installed on both. I download emails on the internet computer, export the messages on a USB stick and import them in my Thunderbird in the other computer. Answer the emails, then export from the outbox and them import to the outbox on my internet computer in Thunderbird. This has worked fine up to now, but since some days I can't send the emails after having imported them in my outbox. I have to reopen each email and send it, and then it goes. But I can't just click send and it sends all one after one. what happens is it processes the email for about a minute and then gives an error message. On each email. What to do?

The copying is for security reasons, I want to be able to keep email comm on an internal server that can't be accessed through internet.
The error message I get is: "Sending of message failed.
The message could not be sent because the connection to SMTP server timed out. Try again or contact your network administrator."
It worked some days ago so I don't understand what's different now.

My mini Mac with a i5 processor is extremely slow to open documents and programs. Is there a solution to this??

Anyone can asset me please. My mini Mac is a 2.3 GHZ i5 Core. 8 GB Ram 13333 MHz with OS 10.7.5.
Pretty much since day one this computer is very..extremely slow to respond to any command. Opening documents or programs the system spin for ever.
Any idea what could be causing this??? I was told that to many pictures slow down the system, I have only 700 pic on file

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS5ServiceManager com.adobe.fpsaud com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.Java-Updater com.oracle.java.JavaUpdateHelper ' ' 879294308 1083382502 1274181950 464843899 1233118628 3301885676 891055588 998894468 695903914 1106243579 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<10) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' '/\./p' '/\.appex\/Contents\/Info\.plist$/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" 'L*/P*/com.ap*.p*.ext*.*.*t -exec '"${c1[14]}"' :displayOrder" {} \;' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors appexes );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 4 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

HELP! I am having trouble with text messaging and sending pictures

I have had the handcent app for a very long time and I have never had any issues with it. Today I downloaded an up date and it is running VERY SLOW and also will not allow me to send pics. It just kicks me out to my home screen. I have tried uninstalling the app and reinstalling it which did not help. I have tried uninstalling it and just using the standard messaging and it just keeps trying to load the screen to text. I have tried restarting the phone and turning it off for a few minutes. My notifications are not running correctly either. The text pops up then the sound come a minute or two later. Anyone have any ideas on what to do to resolve this issue or experiencing the same thing?
Thanks in advance!
Kim

From your description it sounds like you have something hogging up all your systems resources... Try downloading System Panel and activate the monitoring option under the settings and allow it to run and see if it shows any apparently that was using extremely high resources and then try to close it or you can try using a Task Killer for a minute and close. all unused Apps and see if problem continue.
Also you could boot into Safe Mode and see what happens.. Instruction at http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=42081

HT1338 Why I cannot open Mai and send mail via yahoo?

I now cannot open my mail and send mail. I try sending photos and It says yahoo server is not available
There shows as well MF Message Error Domain error 1032.
No idea please help.
Thanks

If the app doesn't work, try removing and then re adding your mail info. Sometimes Yahoo gets their wires crossed and starting over is usually the only way to fix it.

IPhone Slow to Open Messages

We have roughly 80 iPhones deployed all tied to Exchange 2003. These are mostly iPhone 4 and about 10 iPhone 4S units. We have one iPhone 4S which is problematic. It is running IOS 5.0.1 (as most of them are) and opens e-mail very slowly. By open I don't mean pulls down from server. It's in the list of items, you click it, and it's very slow to open. We decided to erase the iPhone and then restore. Same issue. We then placed the phone in recovery mode, and restored. Same thing. I then took an iPhone 4, erased and loaded a fresh copy of IOS 5.0.1. Activated e-mail only (no restore pulling in data to eliminate any apps or other items that might be causing the issue) and the same thing occurs. We tested both over Wifi and 3G and same result. This caused me to believe there must be something wrong with the individuals Exchange mailbox. My next move was to have them move everything out of their mailbox to an archive eliminating a high e-mail count in the mailbox. Still the same issue. Oddly, the same person has an first gen iPad, configured the same way and it open the emails very quickly which would then basically rule out the Exchange e-mail account. Anyone have some ideas?

I have been fighting the same thing for many moons. My Exchange provider has no clue. I upgraded my 3 GS to IOs 5 and this is what happened. I subsequently got a 4S (iOS 5.x), same trouble.
The provider had me change the server I connect to. After it all resyncs, I'll see if it's better. If not, I am going to disable Activesync on the server, and then re-provision it and start over. Don't know what to do after that. Gmail works fine.
My provider said it was a known issue with iOS 5 and it is the fault of Microsoft's activesync serever software. To my knowledge they have been unable to get a patch from Microsoft. My iPad works fine 99% of the time. And what is stranger, other users in my organization have no issues. Weird.

Help re text messages and sending photos

Is there any way to forward a receieved text message, and is it possible to send a taken picture to another mobile phone?
Thanks

It is currently not possible to forward text messages from the iPhone, but as soon as iPhone firmware 3.0 comes out in the summer you will be able to do that.
As far as sending pictures goes, you cannot send a picture via the MMS service, you have to send pictures via email. If you want to send pictures to other people's phones, you have to do the following:
Verizon:
[email protected] (the x's are the 10 digit phone number)
These are the ones I have so far, but I have not tested them all:
Alltel- @message.alltel.com
AT&T- @mms.att.net
Boost Mobile- @myboostmobile.com
Sprint- @messaging.sprintpcs.com
T-Mobile- @tmomail.net
Virgin Mobile- @vmobl.com
Now even though you currently can't send pic messages with the MMS service, Apple's iPhone firmware 3.0 will support MMS, so you won't have to email pictures once it comes out.

N96 So Slow to open messages and send

Similar Messages

Maybe you are looking for