N96 strange display problem plz help
hello,
my N96's display is not working a white thick line is coming at the right side of the screen and other screen area is black + fizzy , i had "camera feature not supported problem " with my N96 from two days till display also got problem,, i was running APP UPDATE for nokia from mobile and then after restart lcd blank i have also
replaced lcd and strip + display IC's
no success
Please any help will be appreciated .. Thanks ,,
This is a known (and very annoying) bug with the N96.
Hopefully they will fix it in the next software update. The exact date of this update is unknown but shouldn't be too far away.
It is also unknown if this update will actually fix the problem or not.
You should complain to nokia using the "contact us" link near the top of the page. The more people that complain the more likely they are to fix it.
Similar Messages
-
N96 audio recording problem, plz help
Hi everyone , this is my first post and I need help.
I bought n96 2 months ago.
When I record -video or audio- there is noisy noise in the backgroud that sometimes is unbearable, I downloaded the vidoes and sound to my pc and yeah it's bad
the problem isn't new, is this a hardware issue? because I fotmatted the phone and upgraded it and nothing has changed.
what should I do?This is a known (and very annoying) bug with the N96.
Hopefully they will fix it in the next software update. The exact date of this update is unknown but shouldn't be too far away.
It is also unknown if this update will actually fix the problem or not.
You should complain to nokia using the "contact us" link near the top of the page. The more people that complain the more likely they are to fix it. -
C7 Display problem plz help :(
I didn't remember when it start.. But after I updated to ANNA sometimes when phone light is on this brightness on the phone uncontrolled going someline on the display (I can't interpret the error ) its likeTV when low TV signal from antenna (on the phone its like uncontrolled votage to display).. But after a restart or somewhile its ok... I have remaining the warranty period also.. But that error is not showing everytime and it rare. So I don't think I can be claim the warranty .. And also there is a small white line on the middle right side to left (8mm) on the phone.. The display never show any colors to that point.. But it doesn't show when displays brightness is very high.. I didn't care about it. But after this blinking case Im upset.. so because of these cases IM going to NCC next 2 weeks..
Tell me what to do (Cz IM not satisfies always with NCC warranty claim because first time nokia assessable is the best)
Solved!
Go to Solution.Same problem with my nokia C7 too...
I updated my phone with Anna and after one day it started displaying permanent color like some time red, green, blue etc instead of Black ......
When I set white wall paper it started showing horizontal lines moving in upward directions....
Attachments:
11092011955.jpg 130 KB
11092011957.jpg 163 KB
11092011958.jpg 125 KB -
There is some problem with my code. It is actually for simply playing a wav file.
It gives errors on two lines....
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import javax.swing.*;
public class MediaPlayerDemo extends JFrame
AudioClip clip; //Error Here
public MediaPlayerDemo(String title)
super(title);
clip = getAudioClip(getCodeBase(),"access.wav"); //Error Here
clip.loop();
public static void main(String args[])
MediaPlayerDemo m = new MediaPlayerDemo("Title");
m.setSize(400,400);
m.setVisible(true);
}"Audio Clip problem plz help"
You have to learn to help yourself.
Have you done anything to try to fix the errors yourself?
AudioClip clip; //Error Here
the error generated here is self-explanatory.
if you can't fix this, you should get a good book on java basics and start again.
the other error is also easy to fix. -
hi!
i am unable to run my RMI server program .Name of My server class is SumServer.java,it implements SumInterface.java all the files(.class,.java and stub) are at location c:\javaprog\rmi\sum.
I have not put them in any package.
value of classpath is
classpath=c:\jdk1.4\lib;.;c:\javaprog\rmi\sum
i go in sum folder and run the program
c:\javaprog\rmi\sum > SumServer
it gives me following exception.plz help me out.
Thx in advance.
Exception occur.Unable to register serverjava.rmi.ServerException: RemoteExcepti
on occurred in server thread; nested exception is:
java.rmi.UnmarshalException: error unmarshalling arguments; nested excep
tion is:
java.lang.ClassNotFoundException: SumServer_StubDeepa lakshmi wrote:
Hi,
Am new to weblogic.
Am using the tools are,
Weblogic8.1 version
MySql5.0,mysql-connector-java-3.1.12-bin.jar file
While test configuration of connection pooling am getting the error is "JDBC Driver is not on the classpath".
How can i solve this problem
plz help me
regards
DeepaEdit the start-weblogic script. Near the bottom, you will see
lines that create a CLASSPATH for the weblogic server. Add a
script line that adds the mysql driver to the classpath there.
Joe -
Very strange problem plz help////
user name == scott.
tablespace name == data and users.
data tablespace content approx.20 tables.
users tablespace content approx 5 tables.
both tables are under scott schema...
i want to reclaim data tablespace size..
so first i import complete tablespace data. as system user.
then after i want to drop data tablespace but i got error...
SQL> drop tablespace data including contents and datafiles;
drop tablespace data including contents and datafiles
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-02429: cannot drop index used for enforcement of unique/primary key
plz. sir help how can i drop this tablespace plz. help plz. plz. plz.Try
SQL> drop tablespace data including contents and datafiles cascade constraints;It seems that you have some referential integrity constraints, outside data tablespace, pointing to a table inside data tablespace. -
Bluetooth connection problem plz help...
hi everyone, just bought a new pearl 9105. everything works fine and even bluetooth... through which i can transfer data from blackberry to other mobiles(samsung,sony ericsson)... but the problem is i could not recieve data from other mobiles.i should get contacts list from the other mobiles... but due to this problem i couldnt. plz help me out..
The best way to receive a file from another device via bluetooth is to go to Media, then press Menu, choose Receive Using Bluetooth, waiting for connection will be display, then send from the other device. It should work without hassle.
-
Hi Guys,
I have a problem to make a developer application Client/Server.
When i install forms Runtime on the Client`s computer and i open the application, i get the error that he can`t find the menu and the libraries.
The menu path is for example on my computer F:\s3\Salesmenu
But on the client it can be a different path an then he can`t find the menu.
Now the properties for the main form are:
Menu module f:\s3\Salesmenu
Initial menu Salemenu
Does anyone know how to fix this problem for example:
1) by let the program search for the menu.
2) .....
Plz Help
Vincentset your FORMS60_PATH on the client to Formspath;libpath;menupath so it looks in every dir named in the path.
-
So, when i click on the itunes shortcut, which has the same icon as the Apple Software Updater, I get a box that says that iTunes has encountered a problem and needs to close. We are sorry for the inconvenience. I hit send once and sent the error report, and then restarted my computer to see if that would help. It didnt, so, now i cant access itunes this is a major problem cause i have all my songs on this computer. I also tried to plug in my ipod and see if that would make it load.
I installed iTunes 7.0 on my laptop, the exact same way, and i works on my laptop, but not on my computer.
PLZ HELP MEok this is what i did when that happened to me. i uninstalled quicktime then went here: http://www.apple.com/quicktime/win.html and reinstalled the latest version :0)
-
Here's what happened:
Every night before I go to bed, I charge my iPhone 3g. Last night I plugged it in to charge it,
and I made sure that it saidmitnwas charging before I went to sleep. When I went to unplug it this morning, it said that the battery was only at 20% left. I checked the plug ( where usb
plug plugs into wall adapter), and it wasn't fully plugged in. This is where it gets weird.
I pushed the USB ug fully into the wall adapter, it came up saying it was fully charged,
and I unplugged it from the wall outlet. I keep the charger in a place where myself or
nothing else would have been able to unplug it. It seems to be working fine now, but this was really weird.
It said it had only 20% battery life left, and then one second later it was fully charged.
Plz help me!possibly the screen had frozen during a display, or hadbeen about to display the 20% status and froze. It still took the full charge and the displayed an action in its cache memory that was no longer accurate hence it then flicked to showing full charge.
-
Hello!My nokia just stuck,or hang in(i dont now english good) but i cant do enything.Evry button just dont work only at start when i write my pi(and somethimes then too).Works only power button.Its weard.Plz help.Somethimes a whole day are no problems somhetimes a whol day.
hey ivee n everyone else .. i'm facing the same problem.. n i need to fix this problem myself..
my n79 gets hang constantly nowadays.. i've used this phone for 1 year plus now so warranty's no more..... none of the buttons on the keypad works when it gets hang.. onli the power button is functioning.. now it's gettin worse .. it even hangs before i insert my pincode... i cant sms, call , or anything.. it hangs after i pressed a few buttons..
so ivee u've fixed ur n79 youself right..? umm.. can u explain to me wat a smallboard is? is that the board at the lower part of the keypad where u can see buttons underneath the white layer? and is that board expensive?
pls reply asap anyone.. urgent -
N79 hanging problem plz help....
while unlocking the keypad of my n79 sometimes the phone gets hanged then i have to take the battery out and then again switch on the phone........plz help me how to get rid of this problem???
I have also same problem with my Nokia N79, I just cancelled sensor for automatic themes from cover. Just open back cover & stick some paper or plastic cello tape on four hole marks of covers wich r sensor for automatic themes to change colour of back cover same as theme colour. From 2 days I feel my mobile working fine without hanging ! so try it, all the best.
-
JTable problem plz help me urgent withDefault TableModel
sir
i carefully read the swing tutorial for JTable for the purpose
of rendring specially header rendring.
first u see the code
import java.awt.event.*;
import javax.swing.*;
import java.awt.*;
import javax.swing.border.*;
import java.util.*;
import javax.swing.table.*;
public class Myscrollpane extends JScrollPane {
ImageIcon icon=new ImageIcon("images/beach1.jpg");
Image img;
int w,h,wi,hi;
TableColumn column = null;
String[] names = {"Company Code", "Company Name"};
DefaultTableModel model=new DefaultTableModel(names,0);
JTable table=new JTable(model);
LogoViewport vp;//user class extends with JViewport
Myscrollpane(int width,int height){
vp= new LogoViewport(width,height);
setOpaque(false);
setMinimumSize(new Dimension(width,height));
setPreferredSize(new Dimension(width,height));
setSize(350,125);
///////////here r the table methods tocontrol /////////////////////
table.setPreferredScrollableViewportSize(new Dimension width,height));
table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF );
table.getTableHeader().setReorderingAllowed(false);
table.setBackground(new Color(245,235,237));
table.setForeground(Color.black);
table.setOpaque(true);
table.setEnabled(false);
table.setFont(new java.awt.Font("Dialog", Font.ITALIC, 12));
table.setGridColor(Color.pink);
table.setRowHeight(22);
table.setSelectionBackground(Color.lightGray);
DefaultTableCellRenderer renderer=new DefaultTableCellRenderer();
TableColumn code=table.getColumnModel().getColumn(0);
renderer.setBackground(Color.red);
//if i use the setIcon method then the data comes from the database is
//not shown because the icon paint above the data.Iwant to paint the
//image on the table dynamically means as table populated the image is
//paint on the table means no fix no of rows.How can i
//do.
code.setCellRenderer(renderer);
TableCellRenderer headerRenderer = table.getTableHeade.().getDefaultRenderer();
TableColumn column1=null;
//i use this to change the color and paste icon of header column
//but it is not work
for (int j = 0; j < 2; j++) {
column1 = table.getColumnModel().getColumn(j);
Component comp = headerRenderer.getTableCellRendererComponent(null, column1.getHeaderValue(), false, false, 0, 0);
comp.setBackground(Color.red);
comp.setIcon(new ImageIcon("myimage.gif")); }
//if i use following it also not work
TableCellRenderer headerRenderer = table.getTableHeader().getDefaultRenderer();
if (headerRenderer instanceof DefaultTableCellRenderer) {((DefaultTableCellRenderer)headerRenderer).setBackground(Color.red);} vp.setView(table);
this.setViewport(vp);
}plz help me with the code.
stated as above i also want to draw the image on the table with the use of DefaultTabel
Model and data set from the data base.Initally no row is shown.
plz help me
thanks in advanceimport java.awt.*;
import javax.swing.*;
import javax.swing.table.*;
public class TableHeader extends JFrame
public TableHeader()
Object[] columnNames =
new ImageIcon("copy16.gif"),
"Some Text",
new ImageIcon("add16.gif")
// Columns headings are cast to a String when created automatically.
// We want Icons, so use a special renderer and create the columns manually
JTable table = new JTable();
table.getTableHeader().setDefaultRenderer( new HeaderRenderer() );
for (int i = 0; i < columnNames.length; i++)
TableColumn newColumn = new TableColumn(i);
newColumn.setHeaderValue( columnNames[i] );
table.addColumn(newColumn);
table.setPreferredScrollableViewportSize(table.getPreferredSize());
JScrollPane scrollPane = new JScrollPane( table );
getContentPane().add( scrollPane );
class HeaderRenderer extends DefaultTableCellRenderer
public Component getTableCellRendererComponent(
JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int col)
setBorder(UIManager.getBorder("TableHeader.cellBorder"));
setHorizontalAlignment(CENTER);
// color each cell
if (col == 1)
setBackground( Color.yellow );
else
setBackground( Color.green );
// display text or icon
if (value instanceof Icon)
setIcon( (Icon)value );
setText( "" );
else
setIcon( null );
setText((value == null) ? "" : value.toString());
return this;
public static void main(String[] args)
TableHeader frame = new TableHeader();
frame.setDefaultCloseOperation( EXIT_ON_CLOSE );
frame.pack();
frame.setLocationRelativeTo( null );
frame.setVisible(true);
} -
Hi all,
I have a problem when I am trying to run a jar file from an applet. The jar is for remote desktop application. Jrdp.jar.
And the Exception is���.
Exception in thread "Thread-6" java.security.AccessControlException: access denied (java.util.PropertyPermission gnu.posixly_correct read)
at java.security.AccessControlContext.checkPermission(Unknown Source)
at java.security.AccessController.checkPermission(Unknown Source)
at java.lang.SecurityManager.checkPermission(Unknown Source)
at java.lang.SecurityManager.checkPropertyAccess(Unknown Source)
at java.lang.System.getProperty(Unknown Source)
at gnu.getopt.Getopt.<init>(Getopt.java:617)
at gnu.getopt.Getopt.<init>(Getopt.java:581)
at net.propero.rdp.Rdesktop.main(Rdesktop.java:290)
at net.propero.rdp.applet.RdpThread.run(RdpApplet.java:190)
can any one suggest me what I have to do???? Plz give your valuable suggestion in that matter. Should I have to do any thing in java.policy file. In that case what would be the syntax and what have allow. If possible plz help me out.
Thanking you,
With regards
Shibaji SabyalTry googling on how to sign your applet. The error you're getting can usually be solved by signing it.
-
I've make two classes named First.java and Second.java in e:\javafiles\test\vg folder
package vg;
public class First
public int m = 100;
public int n = 200;
package vg;
public class Second
public static void me0()
System.out.println("Stupid cant u see the value of m is zero");
public static void mgrn()
System.out.println("Yaar m is greater than n");
public static void neven()
System.out.println("The value of n is Even");
and a Third class
import vg.*;
public class Last
public static void main(String robert[])
Second d = new Second();
First f = new First();
if(f.m==0)
d.me0();
if(f.m>f.n)
d.mgrn();
if((f.n%2)==0)
d.neven();
else
System.out.println("The value of n is Odd");
Now the problem is that if I put the Last.java at e:\javafiles\test and compile it , it works fine but if I put the Last.java anywhere else e.g at e:\javafiles and try to compile it it does not works and gives error
E:\JavaFiles>javac Last.java
Last.java:1: package vg does not exist
import vg.*;
even if I change classapth variable as E:\javafiles\test or even E:\javafiles\test\vg
plz help me in this regardYou need to change where it is trying to find the 'vg' package. So, if your Last.java is in e:\javafiles, then you need to
import test.vg.*
e.g.
import test.vg.*; // Change this line
public class Last
public static void main(String robert[])
Second d = new Second();
First f = new First();
if(f.m==0)
d.me0();
if(f.m>f.n)
d.mgrn();
if((f.n%2)==0)
d.neven();
else
System.out.println("The value of n is Odd");
Alan
Maybe you are looking for
-
Youtube videos not working on macbook pro
youtube videos not working on macbook pro?
-
A while back I made a gamecenter account that was not associated with an Apple ID, it was with my email, now my gamecenter account IS my Apple ID. I want to delete it and make a new one, but i can't figure out how. Help!
-
Problem in Date time Zone parsing
Hi Guys, I want format of String of time whic have time zone also. But how can i validate weather my date is correct or not . This is i am doing because of Auto grow up problem in SimpleDateFormat. For example : If i am parsing "2.00 AM GMT" as per m
-
Dear Friends, I was curious to know if there are standard SAP Roles for MAU Application in SAP IS-U Backend System?. Thanks in Advance Suresh BJ
-
The Edge Animate splash screen broken in v2014.1
As per the screenshot below, the opening screen on Edge Animate 2014.1 is messed up. It seems to be offset to one corner. The menu at the top works, as do the lesson buttons, but the links on the left ("Create New", etc) cannot be used. I'm using Win