N96 streaming problem remain after upgred to 11.10...

after upgreding n96 to new firmwire still cant do any stream file same problem with last firmwire any boady hapen with him same thing????

I tried one clip and it was WMV 448x336 resolution this clip WILL not play on N95 or N96. I checked others and they are .asx files these are not compatible with N95 OR N96.
So, is there a specific video that plays on N95 but not on N96 can you send the link?
640K Should be enough for everybody
El_Loco Nokia Video Blog

Similar Messages

MacBook Pro (Mid 2010) - crashing problems remain after fixes under warranty, what can I do?

Hey all,
So I've had this computer (MacBook Pro 15" mid-2010 model) for a little over a year (bought it a few days after the refresh). Later in the year, it started to get regular crashes until it would become completely unresponsive to the point where turning it on meant I got several beeps (which apparently suggested the RAM was at fault). It was still under warranty, so I had it fixed (RAM replaced). The problems remained, so I returned to have it properly fixed. I went back and forth several times where it was said it had been fixed but actually wasn't. It got to the point where the whole logic board had to be replaced. Although now the keyboard backlight wasn't working, so had to go back and have that fixed as well.
Here's the problem, the MacBook Pro is no longer under warranty. However, the same crashes have started up again. Though it hasn't quite reached the state it was in last year, it still crashes like it use to back then when the crashes first started and I'm afraid that it will eventually reach the state it was in last year. Since the problem is the same as when I originally went to have to MacBook Pro fixed (which was while it was still under warranty) and it took several fixes before it seemed like it was fixed, it could very well still have the same problem. So with that reasoning, am I still covered under warranty?
Originally, I didn't think much of these crashes because all computers crash every now and again. But today when it crashed, it began beeping like it did last year when it wasn't working at all anymore. The crash in itself is totally random in relation to what I may be doing on the computer. The ways it crashes varies: random sudden shut down (not dead battery), a screen comes up suggesting I restart, screen completely freezes, screen goes weird with random color lines.
Also, I don't always get a crash report but I kept one that I did get about two weeks ago after a crash. Perhaps someone technical can take a look and tell me where the problem is in this case?:
Interval Since Last Panic Report: 181649 sec
Panics Since Last Report:          1
Anonymous UUID:                    C26D4B1C-3E52-4D07-977E-7F25EF93E6C2
Thu Jul 7 18:55:39 2011
panic(cpu 1 caller 0x2abf6a): Kernel trap at 0x01258451, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00065588, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x00065528, EBX: 0x00065528, ECX: 0x00000001, EDX: 0x00480000
CR2: 0x00065588, EBP: 0x5cc5bd48, ESI: 0x00000000, EDI: 0x5528d0a8
EFL: 0x00010006, EIP: 0x01258451, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000000
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x5cc5bb68 : 0x21b837 (0x5dd7fc 0x5cc5bb9c 0x223ce1 0x0)
0x5cc5bbb8 : 0x2abf6a (0x59e3d0 0x1258451 0xe 0x59e59a)
0x5cc5bc98 : 0x2a1a78 (0x5cc5bcb0 0x0 0x5cc5bd48 0x1258451)
0x5cc5bca8 : 0x1258451 (0xe 0xcaf90048 0x5cc50010 0xe80f0010)
0x5cc5bd48 : 0x124ffa5 (0x65528 0x6 0x8759000 0x0)
Unaligned frame
Backtrace terminated-invalid frame pointer 0x5cc5be2a
      Kernel Extensions in backtrace (with dependencies):
        com.apple.driver.AppleIntelCPUPowerManagement(142.6.0)@0x124e000->0x1271fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K540
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 4281198920890
unloaded kexts:
com.apple.driver.AppleUSBUHCI 4.2.0 (addr 0x148a000, size 0x65536) - last unloaded 151367621515
loaded kexts:
com.vmware.kext.vmnet 3.0.0
com.vmware.kext.vmioplug 3.0.0
com.vmware.kext.vmci 3.0.0
com.vmware.kext.vmx86 3.0.0
com.paceap.kext.pacesupport.snowleopard 5.7.2
com.vara.driver.VaraAudio 1.0.3
tc.tctechnologies.driver.Saffire 8028
com.digidesign.iokit.DigiDal 8.0.4f2
com.apple.driver.AppleHWSensor 1.9.3d0 - last loaded 36716575405
com.apple.driver.AppleBluetoothMultitouch 54.3
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AGPM 100.12.31
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleHDA 2.0.5f13
com.apple.driver.AppleMikeyDriver 2.0.5f13
com.apple.driver.AudioAUUC 1.57
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.iokit.CHUDUtils 364
com.apple.iokit.CHUDProf 366
com.apple.driver.AppleGraphicsControl 2.10.6
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleLPC 1.5.1
com.apple.GeForce 6.3.6
com.apple.kext.AppleSMCLMU 1.5.2d10
com.apple.driver.AppleIntelHDGraphics 6.3.6
com.apple.driver.AppleIntelHDGraphicsFB 6.3.6
com.apple.driver.AppleUSBTCButtons 201.6
com.apple.driver.AppleUSBCardReader 2.6.1
com.apple.driver.AppleIRController 303.8
com.apple.driver.AppleUSBTCKeyboard 201.6
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.driver.AirPortBrcm43224 428.42.4
com.apple.iokit.AppleBCM5701Ethernet 3.0.5b8
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.12
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.IOBluetoothHIDDriver 2.4.5f3
com.apple.driver.AppleMultitouchDriver 207.11
com.apple.driver.DspFuncLib 2.0.5f13
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.CHUDKernLib 365
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.0.5f13
com.apple.iokit.IOHDAFamily 2.0.5f13
com.apple.iokit.AppleProfileFamily 41.4
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.driver.AppleSMC 3.1.0d5
com.apple.nvidia.nv50hal 6.3.6
com.apple.NVDAResman 6.3.6
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.8
com.apple.iokit.IOUSBMassStorageClass 2.6.7
com.apple.driver.AppleUSBMultitouch 207.7
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0

I can assure you that the sympton is indeed identical. For as the computer got worse, eventually it refused to start up and made 3 beeps. It has done this before, but today more times than before (just like when it first had this problem). Where-ever you go on the internet, it will tell you that the 3 beeps suggest the RAM is at fault. So, the same 3 beeps, means the same problem, which is the RAM.
With that in mind, I re-ask my question with the same reasoning and justification; am I still covered under warranty? (Reasoning/Justification: Considering the original problem was not entirely fixed, though something else was to make the MacBook Pro last a little longer before the reoccurance of this problem).

Dmg's problem remains after 10.5.1 (and Help problems)

I did a download-and-install of the 10.5.1 update. Immediately after, loaded up some dmg's, and found that the problem with unmounting was not fixed in this round. Every few attempts, clcking on the eject icon in the Finder sidebar causes the window to vanish, and the dmg is not unmounted.
And, trying to use Finder Help, it was unresponsive.
I had Console open during all this, looking at the windowserver log; the dmg problem showed up as:
Nov 15 17:57:23 [99] kCGErrorIllegalArgument: CGXGetWindowWorkspace: invalid window id: 5a
Help's ailments shows up as:
Nov 15 18:06:53 [99] kCGErrorIllegalArgument: CGXSetWindowListTags: Operation on a window 0x6 not owned by caller Help Viewer
Nov 15 18:09:55 [99] kCGErrorIllegalArgument: CGXSetTrackingAreaOption : Invalid tracking area
Maybe after 10.5.2 this will go away??

Sorry to hear that. There seem to be several others with the same problems who have posted to this forum.
As for the window closing while trying to unmount, activate something other than the disk you want to unmount (say your internal hard drive), then click the eject button for the drive you want to unmount, this will at least keep the window open.
For unmounting, try the command line unmount solutions at
http://discussions.apple.com/thread.jspa?messageID=5808848&#5808848
Perhaps the next update will fix it, so until then, leaving them mounted till the shutdown seems to be the solution (hopefully the command line fixes it for you).

When i double-click the mozilla icon, it doesn't start. In the task manager i noted that the process "firefox.exe" appears and desappear after 5 seconds. The problem remains in mozilla safe-mode, but not in windows safe-mode. Thks!

Yesterday i installed the firefox 6.0 on my windows 7 computer. When i double-click the mozilla icon, it doesn't start. I opened the task manager and noted that the process "firefox.exe" appears and desappear after 5 seconds. I tried to start mozilla in safe mode but the problem remains. The only way to use mozilla in my computer is restarting the windows in safe-mode. Last thing: i already tried to reinstall the program. Please help me!

I'm also using Windows 7 on a Lenovo U310 laptop.

HT1430 My ipad2 shut down randomly and than start. Problem is remain after reset. Please help!

My ipad2 shut down randomly and than start. Problem is remain after reset. What is the solution.

You can try restoring your iPad as new using iTunes on your computer. This will load a new copy of the iOS software onto your iPad.
If this doesn't work you may have a hardware problem and will need to contact Apple Support.

I have ipad-2 16 gb wifi after upgrading to latest software 4.3.5 my wifi icon is bleached and showing no wifi i tried resetting several times and also tried re booting it and i restored the software several times but still the problem remains please

Respected sir,
i have ipad-2 -16gb wifi. i recently upgraded to latest software 4.3.5 by using i tunes. after updating my ipad wifi icon is bleached and showing no wifi tried resetting several times and also tried rebooting it and i restored the software several times but still the problem remains please help me out.
waiting for your response.
i am using windows 7 operating system.
with regards
vinayaka

Vinayaka-
After all you've tried, Dah*veed is probably right about needing warranty assistance.
But first check to be sure Settings-Airplane Mode is set to OFF, and Settings-WiFi-WiFi is set to ON.
Try unplugging your WiFi router for a few seconds. Then reset the iPad's network. Go to Settings-General-Reset-Reset Network Settings. You will need to reconnect to your WiFi.
Fred

PS CS4 after the patch...problems remain....

Some Months ago, Photoshop CS4 was useless for me due to many problems that occured on my system (and as far as i can see, many other user's systems).
Meanwhile i installed the Patch to Version 11.0.1 and updated to new NVIDIA-driver Version 182.03.
I gave PS CS4 another try and realized, that some of the problems are gone. The OpenGL Features stay activated, rotating and smooth zooming are available and work fast and stable, graphic glitches and wrong menu-drawing are gone. That is most of the time...
Some problems remain:
- My long trusted wacom driver Version 493-3 (the only driver i had no problems with) does not grant me pressure-sensitivity in Photoshop CS4. It works well with CS3, but in CS4 theres no pressure at all. So switched to ne newest driver version. But even the newest Wacom-Driver does not work properly. If I close photoshop and reopen it, some pressure sensitivity of the brushes is gone. Sometimes ALL pressure sensitive functions are gone. Sometimes it helps reloading my brushes, sometimes this has no effect at all. Driver Version is 610-6 in combination with an Intuos3 Tablet.
- I have many cases where Photoshop just disappeared. It closed without warning or error-message.
- the OpenGL Features STILL deactivate out of nowhere. This happens mostly with layer-intensive documents and in combination with taskswitches. I only realise this when zooming becomes jumpy and the smoothness is suddenly gone. Then the rotate feature is greyed out. Strange thing is, all openGL features are still marked as active in the preferences. There's no warning or error message, the features simply vanished for this particular document. (It stays active for other open documents at the same time)
I am completely helpless here. For me it is AGAIN back to CS3. Working with Photoshop CS4 is really not possible with the above mentioned things happening all the time.
I use the most recent drivers available. My system is still fresh and nothing of this ever happened with Photoshop CS3.

I also still have many OpenGL problems (Geforce 8600GT/512MB latest driver, Intel Q6600, Vista 32 Ultimate, PS CS 11.01)
- OGL sometimes just stops working without any message (like Pickman said)
- 66,66% view eats up about 60% CPU usage (just for viewing the picture, nothing else)
- GPU accelerated HDR view produces strong shadow banding
- when drawing a path, the hand tool via spacebar is sometimes not available and sometimes it is, but flick-panning is not working
- when in 66,66% view sometimes tiles of the image only show a flickering checkerboard (again, I`m not moving the image)
-UV-scaling of textures does not work with raytracing (I can definately reproduce this again and again)
- zoom tool is sometimes not working as it should and only resetting preferences helps (imagine a huge skyscraper (great hight, small width). YOu set your zooming rectangle exactely around the edges of the skyscaper and PS of course should zoom in so that the whole building can be seen. But instead it zooms in that the width of the building fills the entire screen. Resetting prferences helps.....for some days. Then it starts again)
- When making changes to a 3D model it happens from time to time that if you go back one step in the history panel the whole 3D model dissapears! Go forward one step again and it reappears.
And then this strange behaviour:
-Create a new document
-create a new layer
-go to "3D-new form from layer" (winebottle for example)
-zoom to 50%
-go to the 3D panel and change surrounding light or diffuse light -while having the color picker of one of those dialogs open (in order to change light color) change zoom view to 66%.
Then the whole 3D model disappears! Zoom to 50% and it`s back again!
I can reproduce this every time!
I really love those GPU features and they were one of the reasons for me to upgrade, but there are still bugs all over the place. I worked very much with 3D in the last couple of days and there really are annoying bugs every couple of minutes.
All in all, PS CS4 11.01 is MUCH better than 11.0, but still very buggy.

Nokia c2-03 online video streaming problem ...:(

Hello.
I have purchased new nokia c2-03, and i thought the phone would b awesome as its a nokia product. But this phone disappointed me a lot. The phone has good features being a low cost phone. But the main problem is it can't stream online videos. Its very strange to belive, i never thought that NOKIA could b so careless please nokia solve this streaming problem in next firmware update..
Lookin forward for a reply.
-GURU

ENG
I Am Sorry. In fact had the DST setting to + 1:0 and I changed to 12:0 am; As the clock time was delayed, because in Portugal we are indeed in summer time!, I changed the time directly. Unfortunately the reminders remain with an hour of advance. The alarm clock that is set crescento for 7:15 minutes as the set initially and never changed. The first reminder has been set for the 7:15 but is now changed to 6:15 due to this error. Does anyone have any suggestions other than modify all reminders. I would add that the Firmware of the Nokia C2 03 est actualized to a V7.48.
PT
Lamento. De facto tinha a definição de hora de verão para +1hora e alterei para 0horas;
Como a hora do relógio ficou atrasada, pois em Portugal estamos de facto na hora de verão!, alterei directamente a hora.
Lamentavelmente os lembretes continuam com uma hora de avanço.
A crescento que o despertador está definido para as 7:15 minutos como o defini inicialmente e nunca sofreu alterações. O primeiro lembrete foi definido para as 7:15 mas está alterado para as 6:15 devido a este erro.
Será que alguém tem alguma sugestão que não seja modificar todos os lembretes.
Acrescento que o Firmware do Nokia C2 03 está actualizado para a V7.48.

DC-in board replaced but charging problem remains

Hi,
I have a 1.67 15" G4 PowerBook that spent long periods plugged into the AC mains with the battery in (I didn't know the G4 PB would work attached to AC with battery removed!)
There was some heat generated; the battery gave increasingly poor performance whenever it was unplugged and then finally stopped charging altogether.
I have a friend with the same model and using his good charged battery the PB works fine but even his battery will not charge when plugged into AC mains.
I thought the DC-in board sounded like the problem so replaced it with a used one stripped from a working PB unit from a large parts vendor.
However the problem remains ie: AC adaptor lights amber; no charging shown on screen battery icon; System Profile says Charger Connected: No, Charging: No
I have tried the PRAM reset and got the 'Date Change' warning box on reboot but still no charging.
Any thoughts?
Do Apple do a remote battery charger if the problem is in the logic board?

Yeah, they must originate from different points, but I would definitely guess that they merge somewhere of course to power the rest of the machine. It just makes sense logistically and monetarily for that to happen. I would bet more on the electronics on the logic board in regards to the power being bad. But it would have to be before the DC-In / Battery juncture because it boots from battery. I would doubt it's the cables. Most of those connector cables are ribbon cables, which are pretty sturdy. Also from the fact that those cables pretty much never move after they were placed inside the case. I just don't see how a short could be created in them. All I can guess maybe is that one of the components on the actual logic board side connecting to the DC-In board is bad somehow. No way for me to know how to test that directly though. I haven't had a chance to poke around with it much right now as I had to take my car in to the shop. Might have time this week-end to investigate some more. I'll definitely let you know if I come up with a solution / cause of problem.

Use Google's Public DNS Server To Fix Apple TV Streaming Problems

Many people have been having a streaming problem with the Apple TV - especially with Netflix. In fact, it's often the most popular topic on this forum. After having the same problem off and on for two years, I finally figured out the following solution. It uses Google's public DNS service instead of your ISPs DNS.
1. Navigate to Settings >> General >> Network and select Configure TCP/IP.
2. Select “Manually” next to Configure IP.
3. Dont change the IP address or the Subnet Mask and Router Address. Just click "Done".
4. Set the DNS Address screen with the following: 008.008.008.008 and click “Done.”
You should now be able to stream more smoothly on your Apple TV.
This problem is probably caused by a bad streaming server somewhere on Netflix's CDN (Content Delivery Network). The DNS points your Apple TV based on location. By using Google's DNS, you get a different streaming server. That is, of course, a wild guess and is not verifiable by me. But, it makes sense so I'm going with that.
If this works for you, please buy a cup of coffee for a complete stranger or some other selfless, random act of kindness.

Welcome to the  tv Discussion Forums.
Barring interference to the network (which is probably unlikely but not totally out of the question) I'd agree that your problem seems specific to one mac. IMHO reinstalling an OS is more often than not a lazy mans way of saying they can't be bothered to look for the problem and totally unnecessary so far as I am concerned. I don't believe any version of itunes has been a problem for the tv, although there have been the usual problems posted that usually accompany any upgrade (these are more than likely due to updating over damaged files).
Reinstalling itunes will replace the application but not many of the associated preference files that are more likely to be a problem than the application itself. Rather than reinstalling itunes, I'd try creating a new user and try itunes in the new user account to see if the problem persists.
You could also create a new library in the original user account and see if you have similar problems with that library.
Check your network settings and compare them to the other macs that work OK, check for proxy servers and DNS addresses.

Why is my iPhone having streaming problems?

My iPhone 4S is having streaming problems. Every time I stream music or a video it keeps cutting out. It's done loading, but either the sound or the video just stops every few seconds and I have to keep pressing the play button. It's very frustrating, I've reset my iPhone but it didn't work. I downloaded the Chrome browser and it helped a little bit, but it still does it. And this has all happend after I downloaded the new update 6.1.2 Is there anyway to fix it??

NO my iphone is not second hand
i have done eveything from changing my sim card to a new one TO switching my phone offand on TO doing the airplan mode thing TO resetting the network settings!
the only thing left to do is trash the stupid phone!

MSI P45-8D problem: reboot after loading startup services (windows seven 64bit)

hi guys!
I decided (buying a cooler master elite 360) to keep my Memory Lover (whit ddr3/ich10r, pci-ex 2.0), which is actually the 'best purchase for me (rather than a G41 mATX) .
But then, after I had solved the problem of overheating in the pci-ex, and I put the board in its box for weeks, now has a new problem:
Continuous blocks & reboots just after loading startup services windows seven!
The setup is this:
Windows Seven 64bit
MOBO MSI Memory Lover
CPU Xeon L3110
VGA MSI Radeon HD5450 1gb ddr2 fanless
DDR3 1333 4GB
PSU Tacens Radix V mATX 35Watt Velociraptor + Caviar Green
DVD burner (sata)
Esi pci-ex sound card connect module
Creative Xtreme Gamer (disconnected for now)
I have many ram models that I can put in:
kingston lovo 4gb 1333
4g-skill eco 4gb 1333
adata green 4gb 1333
corsairs white 8gb 1600
All memories can work undervolt at 1.35volt, but-of course-I keep them in standard 1.5Volt for more stability
I also tried a single 2gb stick at a time, but nothing has changed
when the system reboots (I infer) windows finished loading all the startup services (including antivirus, network drivers, audio drivers, etc. ..). and I can say with near certainty, that the last major service that is loaded, is the catalyst control center ...
I suspect an incompatibility with Memory Lover & the Video Card's ATI driver ..
I also tried to uninstall and clean with driver sweeper, but the problem remains ..
Besides this I also have a problem with the temperature of the processor xeon l3110 (45watt tdp)
cpu heatsink as I have a Arctic Freezer LP 11 (Capacity Cooling 100W).
with thermal compound pre-installed I had 60/70 degrees recorded.
I changed the thermal compound with the famous Prolimatech pk-1 and now I measure 80/90 degrees ...(and I've changed a lot of thermal compound that I put with my eyes closed)
now, this is not possible because:
-I know the processor, I kept in daily use at 3Ghz with a noctua nh-U9B se2, and in summer never exceeded 40 degrees (d 'winter was about 30 degrees)
- Either with the Scythe kama thermo, that with my finger, the heatpipes of the Freezer 11 LP, the Mosfet, the NB & SB are all cold .. the 5450 is 40 degrees or so, but it is fanless, and its temperature is in its normal ..
What can you tell me of my two problems:
- Continuous reboots after loading windows seven
- High temperature cpu (probably not real)
I remind you that a few months ago the team & Memory Lover Xeon L3110 worked perfectly.
The PSU is a new 350Watt Tacens Radix V mATX ... the system at idle consumes 70/80 watts (measured at the wall) ... I think it Is not a problem of the little power supply for the needs of my system ..
and anyway I can try to use an old Enermax 450watt Liberty, which I keep for emergencies..
thanks
max

guys,
I solved the problem!
the sink was installed wrong, and did not touch on the processor!!!
the problem was the mosfets around the cpu that make thickness in height ..
the thermal paste was put well and ... still immaculate!
processor took about 20 (or more) of restarts and very high working temperatures!
it rocks!!
I can now say that the 'AC Freezer 11 LP is sensational!
The Xeon L3110 (with EIST, C1E & Acpi active together, That downclok it) works now to 23-25 degrees!!
I have installed the ddr3 kingston 4gb Lovo 1333 + 8GB Corsair 1600 1.35Vram white.
(with 12GB, I can easily do a large Ramdisk for temporary files).
I installed hd5450 driver manually, but still the catalyst control center does not appear at startup
here is the screen of the situation:
finally...but how did I doubt the quality of this MSI board?

Live streaming stops automatically after 15 minutes

I am using flash media server 3 and flash media encoder 2.5.
From media encoder I am sending data to media server and then in
browser I am running flex application (version 3) to view the live
stream. I am not saving it in flv file. After 15 mintues live
streaming stops automatically. I have tested all events related to
it..but none of them executes..Flex3 application is just working as
a client.
Portion of code:
nc.connect ("rtmp://localhost/myLiveApp/instance1/");
vid.attachNetStream (ns);
ns.play("flv:mylivestream");
case "NetStream.Play.StreamNotFound" :
/*The FLV passed to the play() method can't be found. */
mx.controls.Alert.show("stream not found");
break;
code in main.asc file :
application.onAppStart = function()
// generate random payload used in bw detection
this.payload = new Array();
for (var i=0; i<1200; i++){
this.payload
= Math.random(); //16K approx
application.onConnect = function(p_client, p_autoSenseBW)
//Add security here
//p_client.writeAccess = ""; // prevents creating shared
object or live streams.
this.acceptConnection(p_client);
p_client.audioSampleAccess = "/";
p_client.videoSampleAccess = "/";
if (p_autoSenseBW)
this.calculateClientBw(p_client);
else
p_client.call("onBWDone");
Client.prototype.getStreamLength = function(p_streamName) {
return Stream.length(p_streamName);
Client.prototype.checkBandwidth = function() {
application.calculateClientBw(this);
application.calculateClientBw = function(p_client)
var res = new Object();
res.latency = 0;
res.cumLatency = 1;
res.bwTime = 0;
res.count = 0;
res.sent = 0;
res.client = p_client;
var stats = p_client.getStats();
var now = (new Date()).getTime()/1;
res.pakSent = new Array();
res.pakRecv = new Array();
res.beginningValues = {b_down:stats.bytes_out,
b_up:stats.bytes_in, time:now};
res.onResult = function(p_val) {
var now = (new Date()).getTime()/1;
this.pakRecv[this.count] = now;
trace("** onResult this.count = " + this.count + " :
this.sent " + this.sent);
//trace( "Packet interval = " + (this.pakRecv[this.count] -
this.pakSent[this.count])*1 );
this.count++;
var timePassed = (now - this.beginningValues.time);
if (this.count == 1) {
this.latency = Math.min(timePassed, 800);
this.latency = Math.max(this.latency, 10);
//trace("count = " + this.count + ", sent = " + this.sent +
", timePassed = " + timePassed);
// If we have a hi-speed network with low latency send more
to determine
// better bandwidth numbers, send no more than 6 packets
if ( this.count == 2 && (timePassed<2000))
this.pakSent[res.sent++] = now;
this.cumLatency++;
this.client.call("onBWCheck", res, application.payload);
else if ( this.sent == this.count )
// See if we need to normalize latency
if ( this.latency >= 100 )
{ // make sure we detect sattelite and modem correctly
if ( this.pakRecv[1] - this.pakRecv[0] > 1000 )
this.latency = 100;
// Got back responses for all the packets compute the
bandwidth.
var stats = this.client.getStats();
var deltaDown = (stats.bytes_out -
this.beginningValues.b_down)*8/1000;
var deltaTime = ((now - this.beginningValues.time) -
(this.latency * this.cumLatency) )/1000;
if ( deltaTime <= 0 )
deltaTime = (now - this.beginningValues.time)/1000;
var kbitDown = Math.round(deltaDown/deltaTime);
trace("onBWDone: kbitDown = " + kbitDown + ", deltaDown= " +
deltaDown + ", deltaTime = " + deltaTime + ", latency = " +
this.latency + "KBytes " + (stats.bytes_out -
this.beginningValues.b_down)/1024) ;
this.client.call("onBWDone", null, kbitDown, deltaDown,
deltaTime, this.latency );
res.pakSent[res.sent++] = now;
p_client.call("onBWCheck", res, "");
res.pakSent[res.sent++] = now;
p_client.call("onBWCheck", res, application.payload);
What is the problem? From media server console I can see 2
connection for 15 minutes and after that it drops to 1.
I have tested it with medium and low bandwith.
Any help is appreciated.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

N96 Memory problem (internal 16GB)

N96 Memory problem (internal 16GB)
If I fill the internal memory with more than approx 5gb the phone goes crazy...
(9,3Gb free)
Here are a couple of examples
* The phone becomes alot slower
* When powering up the phone stops at a white blank screen until * I press the power button again.
* When starting the music player all buttons associated with the music player(both on phone and handsfree) becomes unresponsive and the only way to stop the music is to remove the battery to turn off the phone.
Another problem that occasionally occurs even if I have more free space on my memory card is:
* When using the alarm clock there is a 33% chance that the phone will freeze when I turn it off. The only way to use the phone again is to remove the battery.
I haven't updated the phone yet because the update isn't available yet in sweden it seems.
Solved!
Go to Solution.

This may be the issue, New content!:
Scanning for new content (slowness in UI)
- This is somewhat improved in 11.018 but still:
- If you've loaded many Pictures, Videos or Music, you may see the device appear to slow down or even become unresponsive. After new content has been added, it is being scanned by the device and being added to the media applications. Until that happens, the new content may not be visible in these applications (e.g. Photos and Video Center application) right away. The phone will need to find the files and create the thumbnails and other details. This information creation takes time and the processing may slow down the device. Your best option is to open Video Center and Photos and leave open in the background then check after a few minutes if the videos and pictures you loaded are already there before using your device.
The same applies if you insert a memory card with lots of content on it.
- Do Not leave the Photos or video center in background during this time.
More tips:
http://portablevideo.blogspot.com/2008/10/some-tips-and-other-info-for-n96.html
640K Should be enough for everybody
El_Loco Nokia Video Blog

Opening files with Illustrator and photoshop doesn't work, i have to drag the files from finder in to the program. This problem appears after opening 4 a 5 files.

Opening files with Illustrator and photoshop doesn't work, i have to drag the files from finder in to the program.
This problem appears after opening 4 a 5 files, rebooting helps another 4 a 5 times and appears again.

I'd recommend reposting in the Boot Camp forum, that is where the Boot Camp and Windows gurus hang out.
Good luck.

N96 streaming problem remain after upgred to 11.10...

Similar Messages

Maybe you are looking for