N96 - V20 update - lost connection - failed update

Hey Guys
I'm trying to upate my n96 to v20 and after the download through NSU it looses connection, the phone reboots but NSU goes to recovery then says it's failed to update.  I've done the 3 button reset, re-installed PC and NSU but no joy. Is there anything I can do?

pedro74 wrote:
Any ideas why I keep loosing connection on NSU? It's allowing the download but when it says '15 mins remaining' it looses connection with the phone.  It's at exactly the same point each time????????????
Hi pedro74
Once downloaded it is stored locally temporarily so doesn't keep downloading. When you say that you have un-installed PC Suite + NSU, I am concerned that corrupt registry keys will now preclude a satisfactory installation here. 
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

  • N96 V20 Update: Connection Lost during OTA update ...

    Ok, I decided to update my N96 thru OTA this time. I chose "Check for New Updates" from the phone's menu but while checking if there was a new update, the phone told me "the connection was lost!" with the WLAN modem.
    I am now little concerned about using OTA. What happenes if this happens right in the middle of "updating process?"
    I wanted to try NSU but this time NSU said the latest firmware was still "V12". No luck there either. I guess V20 isn't widely available around the world yet, or is it?
    I don't think NSU would tell me that there was no V20 available yet, where there really was.
    By the way, my phone is purchased directly from Nokia (unbranded, no operator branded.)

    The update may not be available on NSU yet for your product code
    One of the cool things about updating OTA rather than via NSU i sthat if the connection is lost, not only does it not crater the phone, but you get the option to resume your download from where it left off rather than the begining

  • After Updating Mountain Lion, Mail & Safari keep crashing; WLAN Connection fails

    After Updating Mountain Lion, Mail & Safari keep crashing; WLAN Connection fails;
    I have updatet Mountain Lion and since then, Mail & Safari keep crashing plus: WLAN Connections keeps on failing from time to time.
    My Router has the newest firmware, i am clueless what to do.
    I even cannot shut down my mac properly.

    Hello you all,
    I also had the problem of a disconnecting wifi while my imac was sleeping. I did not have the reconnecting issue after sleep, but the lost connection issue during sleep which made it impossible to reach my imac for things like homesharing, apple tv or remote desktop. I have a late 2012 iMac with a clean ML 10.8.2 on it and wirelessly connected to an apple time capsule (same as an airport extreme). My partner has a mid 2007 iMac, also with an ML 10.8.2 on it.
    I tried every single solution I could find on the internet, such as changing the router's security from wpa2 to wpa, changing the MTU from automatic to manual 1453, router reboots, re-installations, re-configurations, keychain clean-ups, everything.
    Eventually I solved my problem with these steps and now it works as a charm. I can still find the iMac with the remote app, even after 12 hours of sleep:
    My time capsule router is set on automatic MTU and encrypted with WPA2 and I use  the 5Ghz network!
    1. Cleaned all the wifi passwords in keychain on my iMac
    2. Created a new network location in system preferences
    3. In this location I deleted the bluetooth pan and bluetooth dun connection.
    4. In this location I changed the preferred connection-order to wifi on #1 and ethernet on #2.
    5. Restarted my iMac.
    Now I still have a connection when it sleeps and I can wake it to low profile using the remote app (homesharing) and everything works fine.
    Hope more people wille be helped by this.

  • Mail: "connection failed", problem associated with software update

    When I attempt to get mail, I frequently get a symbol on the side panel of an encircled triangle enclosing an exclamation point. If I click on the symbol, I get a message that says (condensed): “connection failed, check settings for your POP account, server error encountered, connection timed out on port 0, do you want to stay offline or go online.” If I click go online, the usual spinning circle appears and then sometimes I get my mail. Sometimes I have to repeat the process several times before I get mail. I am, of course, always online; the connection has never failed. This problem started some time ago after I updated Apple software. I called my ISP and they made a few changes in my mail preferences, but that didn't help. I used disc utility to repair disc permissions and that helped but (strangely enough) only for a few days. This problem was discussed several years ago in message #1724339 but nobody could solve it. Can anyone solve it now? Thanks. Robert Pollock

    Hi Wolfgang,
    check out the "Nokia 808 Belle FP1 bug: WLAN works, but not all ap..." thread. Looks like you are having the same issue, and there's quite some info on this issue in that thread. The issue must be related to Symbian Belle somehow, since Anna and S60v5 are reported to perform well under the same conditions.
    Best regards,
    Tobias
    www.tf-translate.net
    www.deutscheschule.kiev.ua

  • Tried updating my iPad mini to iOS 8, it went into recovery mode and when I try to update then restore it on iTunes it says the download will last 300  HOURS and then it says something like "Connection failed"?

    I tried uppdating my ipad then it went into recovery mode. I thought "oh no problem, my phone has done this before". So, I hooked it up to iTunes and started to restore/update it, but when the update began, it said it would take 24 hours to download. Already abnormal. Then, the number kept rising higher and higher until it got to 300 HOURS. Then, once it reaches a certain 300, it says "connection failed. please check to see that you have a working connection or try again later" or something like that. So, my iPad is now stuck in recovery mode and I can't exactly talk to people now. What do I do?

    Hello aZaa4401
    Sorry to hear about your issue. I would start your troubleshooting with the article below to check to settings of your computer to make sure your connection is good to the iTunes Store.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Regards,
    -Norm G.

  • I have tried to update my iPod Touch 4G to the latest update. After the 4 hours an error message appears saying iTunes had lost connection even when I am fully connected to the internet. I have repeated the update 4 times now with not luck. Any ideas?

    I have tried to update my iPod Touch 4G to the latest update, I currently have iOS 4.1. After the 4 hours an error message appears saying iTunes had lost connection even when I am fully connected to the internet. I have repeated the update 4 times now with not luck. Any ideas?
    Thanks in advance
    Adam

    If you get a network timed out error, try disabling the security software on the computer during the download and install.
    You can also try a direct download andinstall by:
    iPod, iPhone and iPad Firmware Download
    Nera the top of the page aretheinstructions for selecing the download for the install.

  • After update mac os 10.9 wifi LOST CONNECTION

    After I update the lastest operation system, my air lost connection frequently. Each time I have to manually turn off the Wi-Fi for half minute. Then turn it up and it works again. It has happen for dozens of times. Is there anyway to fix it?

    I had same problem.  Warning -- I am no expert, but tried some things out of desparation and one worked.  I have Macbook Pro (about 3 years old).  My wife as old iMac (too old for newer OS updates).  We have wifi network.  threee computers use the network, 3 ipads, and our iphones. 
    I went into network settings - clicked on our network -- went to advanced -- then opened TCP/IP tab and changed the Configure IPv4: to Using DHCP with manual address.  I then entered the address I found on my iPad by going to Setting / WI-FI to find our Network. I clicke the i with the circle around it (information) and found the IP address, I entered the IP address into the MacBook Pro IPv4 address, which is in the format of XX.X.X.XX.  However I changed the last number by one digit up.  Clicked apply and it worked.  Again I am a novice, so this may or may not be a good idea, but at least for now, it is working.  DWall71

  • Definition Updates: Connection Failed

    Hi,
    I currently have SCCM 2012 R2 and I've created ADR's for the definition updates.  In the settings I've set 'Updates distributed from Configuration Manager' as the only source.
    Windows 2008 R2 / Windows 2012 and Windows 8.1 clients all seem happy. However the Windows 7 (x64) clients do not update. I just get an error message saying 'Connection failed'.
    Does anyone have any idea on how to fix this please as it's driving me up the wall.  The polices are just copied off each other and the ADR is a template (I've checked them side by side and they're both nigh on the same).
    TIA.

    Hi,
    Thanks for the info.  I've just checked that key and it is indeed blank.  I've put the log files below.  If there is a bold that means the line was either red or yellow in the Trace tool.
    ScanAgent.log
    Message received: '<?xml version='1.0' ?> <UpdateSourceMessage MessageType='ScanByUpdateSource'>
      <ForceScan>TRUE</ForceScan>
      <UpdateSourceIDs>
       <ID>{AD619C8B-F697-406D-91A0-D295C655E64F}   </ID>
      </UpdateSourceIDs>
     </UpdateSourceMessage>'
     ScanAgent 11/07/2014 10:00:19 2092 (0x082C)
    *****ScanByUpdateSource request received with ForceReScan=2, ScanOptions=0x0000000a,  WSUSLocationTimeout = 604800 ScanAgent 11/07/2014 10:00:19 2092 (0x082C)
    Sources are not current ScanAgent 11/07/2014 10:00:19 2092 (0x082C)
    ScanJob({7D5421DD-0121-494E-A1D9-4C9EF07B1CE5}): - - - - - -Locations requested for ScanJobID={7D5421DD-0121-494E-A1D9-4C9EF07B1CE5} (LocationRequestID={EB9809D4-93C0-437E-B359-92FD08F05FF7}), will process the scan request once locations are available. ScanAgent 11/07/2014
    10:00:19 2092 (0x082C)
    *****WSUSLocationUpdate received for location request guid={EB9809D4-93C0-437E-B359-92FD08F05FF7} ScanAgent 11/07/2014 10:00:19 4292 (0x10C4)
    Sources are not current ScanAgent 11/07/2014 10:00:19 4900 (0x1324)
    UpdateDeployment.log
    User logon system task UpdatesDeploymentAgent 11/07/2014 09:43:06 5164 (0x142C)
    EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0 UpdatesDeploymentAgent 11/07/2014 09:43:28 2468 (0x09A4)
    Assignment {c27d1940-f113-4ce3-93c0-8ff45636424e} has total CI = 2 UpdatesDeploymentAgent 11/07/2014 09:44:45 2468 (0x09A4)
    OnPolicyModify for assignment ({c27d1940-f113-4ce3-93c0-8ff45636424e})...  UpdatesDeploymentAgent 11/07/2014 09:44:45 2468 (0x09A4)
    Activation time has not arrived for assignment ({c27d1940-f113-4ce3-93c0-8ff45636424e}) Just remove old instances. UpdatesDeploymentAgent 11/07/2014 09:44:45 2468 (0x09A4)
    Message received: '<?xml version='1.0' ?><SoftwareUpdatesMessage MessageType='EvaluateAssignments'><UseCachedResults>False</UseCachedResults></SoftwareUpdatesMessage>' UpdatesDeploymentAgent 11/07/2014 10:00:17 4900
    (0x1324)
    Removing scan history to force non cached results UpdatesDeploymentAgent 11/07/2014 10:00:17 4900 (0x1324)
    Assignment {c27d1940-f113-4ce3-93c0-8ff45636424e} has total CI = 2 UpdatesDeploymentAgent 11/07/2014 10:00:17 4900 (0x1324)
    Assignment({c27d1940-f113-4ce3-93c0-8ff45636424e}) still not active. No need to evaluate UpdatesDeploymentAgent 11/07/2014 10:00:17 4900 (0x1324)
    Unable to evaluate assignment {c27d1940-f113-4ce3-93c0-8ff45636424e} as it is not activated yet UpdatesDeploymentAgent 11/07/2014 10:00:17 4900 (0x1324)
    Evaluation initiated for (0) assignments. UpdatesDeploymentAgent 11/07/2014 10:00:17 4900 (0x1324)
    UpdatesHandler.log
    Updates scan completion received, result = 0x87d00692. UpdatesHandler 10/07/2014 13:23:02 3488 (0x0DA0)
    Initiating updates scan for checking applicability. UpdatesHandler 10/07/2014 16:04:18 7324 (0x1C9C)
    Successfully initiated scan. UpdatesHandler 10/07/2014 16:04:18 7324 (0x1C9C)
    Updates scan completion received, result = 0x87d00692. UpdatesHandler 10/07/2014 16:04:20 4904 (0x1328)
    Initiating updates scan for checking applicability. UpdatesHandler 10/07/2014 17:17:36 1920 (0x0780)
    Successfully initiated scan. UpdatesHandler 10/07/2014 17:17:37 1920 (0x0780)
    Updates scan completion received, result = 0x87d00692. UpdatesHandler 10/07/2014 17:17:38 1920 (0x0780)
    CUpdatesAgent::FinalConstruct entered UpdatesHandler 11/07/2014 10:01:00 6000 (0x1770)
    UpdatesStore.log
    Successfully raised state message for update (8427071a-da80-48c3-97de-c9c528f73a2d) with state (Installed). UpdatesStore 11/07/2014 10:04:55 6000 (0x1770)
    Update status from update (9e6925b5-d6bb-49a0-8e36-4850b9e79886) hasn't been reported before, creating new instance. UpdatesStore 11/07/2014 10:04:55 6000 (0x1770)
    Update status from update (a9ec5672-a19a-4e23-9fae-8cde9b54d188) hasn't been reported before, creating new instance. UpdatesStore 11/07/2014 10:04:55 6000 (0x1770)
    Update status from update (aa6d59a9-2a07-49b6-9760-c13bf409be6b) hasn't been reported before, creating new instance. UpdatesStore 11/07/2014 10:04:55 6000 (0x1770)
    Update status from update (ab7fba39-f578-42e6-8e98-060d7d3a2926) hasn't been reported before, creating new instance. UpdatesStore 11/07/2014 10:04:55 6000 (0x1770)
    Update status from update (ae4b2e36-33ae-4bfb-a4da-f585176869e4) hasn't been reported before, creating new instance. UpdatesStore 11/07/2014 10:04:55 6000 (0x1770)
    Update status from update (b4c092bf-7617-4de5-b9ad-b37578d268cd) hasn't been reported before, creating new instance. UpdatesStore 11/07/2014 10:04:55 6000 (0x1770)
    Update status from update (b56a2146-94f5-4e62-91a2-136e783d3908) hasn't been reported before, creating new instance. UpdatesStore 11/07/2014 10:04:55 6000 (0x1770)
    Update status from update (c2316e20-57aa-4001-b645-6f32adbedd16) hasn't been reported before, creating new instance. UpdatesStore 11/07/2014 10:04:55 6000 (0x1770)
    Update status from update (d1ac2c16-67bb-465d-9a41-00e145472536) hasn't been reported before, creating new instance. UpdatesStore 11/07/2014 10:04:55 6000 (0x1770)
    Update status from update (e4afced9-7182-4aa0-a6fa-4ab5a8732ff9) hasn't been reported before, creating new instance. UpdatesStore 11/07/2014 10:04:55 6000 (0x1770)
    Successfully done with SetStatus() operation. UpdatesStore 11/07/2014 10:04:55 6000 (0x1770)
    Any ideas?

  • Mac App Store Connection Failed After Mavericks Update

    Hi y'all,
    immediately after I updated my Lion to Mavericks (10.9.1), I could not access no more Mac App Store: as I enter my (valid and active) Apple ID credentials, I receive a "Connection Failed" message (in red, in the same login dialog, under the user id field).
    So I've tried to set to "Always Trust" all of my Class 3 Certificates in my Keychain, I removed all of the Mac Appstore plist files (appstore and storeagent), I've also tried to remove the network preferences plist file to reset my network interfaces preferences, I've also deleted the ocsp and crls cache files, and I've setup the ocsp and crls certificates preferences in my Keychain Access to off.
    I obviously checked out my App Store account and it's correct and active - I'm also currently using it on my iPhone, iPad and iPod with no problem at all!
    Anyway I wanted to try creating a new App Store account from the Mac AppStore itself: after I validated it, I tried to login into Mac AppStore... with no success!
    So, NONE of the above mentioned attempts solved the problem, and I'm WORRIED and astonished wondering HOW APPLE COULD RELEASE A MAJOR O.S. UPDATE THAT SMASHES THE MAC APP STORE, WHICH IS ONE OF THE CORE APPS OF THIS O.S.!!! I use Mac OSes since many years and I never had O.S. problems (only some minor issue with third party applications out of Apple's scope and solved with some simple workaround).
    CAN ANYBODY PLEASE HELP ME? :-)
    THX IN ADVANCE,
    DANI

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • I've updated to FF26 and get the follow error message "Secure Connection Failed" why is that?

    ever since I've updated to FF26 some of the sites won't come up and show the following error message:
    Secure Connection Failed
    An error occurred during a connection to www.facebook.com. SSL peer rejected a handshake message for unacceptable content. (Error code: ssl_error_illegal_parameter_alert)
    The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
    Please contact the website owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site.
    it does not happens all the time but most of the times.
    this also occurs on google.com, twitter.com and many more.
    what to do?

    Do you have the option to turn off the feature of Kaspersky scanning your SSL traffic? Usually that can be turned off (e.g., in ESET and BitDefender).

  • Mobile connection fail after updating apple 4s to ios 6.1.3

    Mobile connection fail after updating apple 4s to ios 6.1.3
    intertnet and other online applications are not working after updating to apple iphone 4s to ios 6.1.3
    what is the solution for this......

    try resetting your network settings.
    Settings.app -> General -> Reset - > Reset Network Settings
    CMIIW

  • HP photosmart c4780 lost connectivity to laptop after update

    I have lost connection to HP c4780 printer. It seems to have happened after updating firefox. Connecting laptop directly by usb to printer works.

    Hi,
    If the installed Firefox is from a legitimate source and if the OS is secure, you can be fairly confident that Firefox wouldn't and cannot change OS network settings and hardware settings. Please also see [http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-89191-1&cc=us&dlc=en&docname=c02253256&jumpid=reg_r1002_usen&lc=en&product=3794615 this] regarding a similar issue.

  • Iphone 6 lost connection error when PC READS the phone since iTunes update. t

    Lost connection error when trying to sync iphone 6 since iTunes update. Has anyone else had this issue its VERY FRUSTRATING, when the PC reads the phone?
    Message was edited by: marcityme

    Get a replacement nanoSIM from Rogers and see if this helps.

  • Adobe Flash lost connection @ 30%. Mac install fails.

    I am seeing this all over the forums with no one finding a solution. I have tried everything suggested either in Safari or Firefox including a clean install 3 times!! Even after uninstalling and deleting the flash files in the library, when I go to try downloading and installing it immediately starts at 30% and then I get the error message "Lost connection. Trying to connect...." then it hangs for a bit and then I get "Connection failed. Unable to complete installation." I go to their support link when the install fails but the link that they suggest to download from directly in the final step is "NOT FOUND". See here: Installation problems | Flash Player | Mac
    This same link is showing up in several forums for a solution. I don't know what else to do. I'm posting this to add to the many many others with the same issue in hopes that Adobe will fix this! I am on a MAC OS 10.9.5. Never had this issue before with the flash updates!!!

    Solution found on another thread. Download the offline installer here: http://fpdownload.macromedia.com/pub/flashplayer/current/support/install_flash_player_osx. dmg
    I downloaded and was able to install Flash properly. Make sure you do a clean install just to be sure.

  • I cannot install Adobe Flash Player.  I have windows 7 64bit and firefox browser.  During install i get a message 'lost connection', followed by 'trying to reconnect', and then connection failed

    I cannot install Adobe Flash Player. I have windows 7 64bit and firefox browser. During install i get a message 'lost connection', followed by 'trying to reconnect', and then connection failed

    Many thanks for this!   I managed to install the Flash Player with this successfully after many failed attempts before.
    Thanks again
    Jason Pearlson
          From: Jeromie Clark <[email protected]>
    To: Jason Pearlson <[email protected]>
    Sent: Wednesday, March 25, 2015 10:46 PM
    Subject:  I cannot install Adobe Flash Player.  I have windows 7 64bit and firefox browser.  During install i get a message 'lost connection', followed by 'trying to reconnect', and then connection failed
    I cannot install Adobe Flash Player.  I have windows 7 64bit and firefox browser.  During install i get a message 'lost connection', followed by 'trying to reconnect', and then connection failed
    created by Jeromie Clark in Installing Flash Player - View the full discussionPlease use the offline installer Internet Explorer: http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_ax.exe Firefox and other NPAPI browsers: http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player.exe If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7349939#7349939 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7349939#7349939 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Installing Flash Player by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Maybe you are looking for